post your highest frequencies.... and if they are stable...
here goes my answer:
768mhz using miks rom 6.5.3.. totally stable..
806Mhz using franco kernels I would like to try higher, the optimus gt540 uses the same processor and overclocks much better, right upto 900mhz for some people
768... If I go higher I get kernel panics...
aaronbutton said:
806Mhz using franco kernels I would like to try higher, the optimus gt540 uses the same processor and overclocks much better, right upto 900mhz for some people
Click to expand...
Click to collapse
whoa kewl..!! but i have read somewhere on the internet that clocking the processor above 800mhz can kill the processor...
onlymeipse said:
768... If I go higher I get kernel panics...
Click to expand...
Click to collapse
same here... tried 806mhz... but failed...
3600 mhz on my pc xd
I suppose over clocking to 135% of its rating sounds a bit much but if the gt540 can run the same cpu at 150% I dont think I could hit 806mhz before I went with the franco kernel. Such as with megatron.
The nook color is fitted with a 800mhz cpu and the over clock that can be achived on those now seems ridiculous. 1300mhz is 162% but some can reach 1600Mhz 200% check it out on http://www.youtube.com/watch?v=kCGTvxefPSc.
(I thought I'd use % to make things more comparable)
I'll be checking back for the P500 at 1.2ghz
ccdreadcc said:
3600 mhz on my pc xd
Click to expand...
Click to collapse
haha... thats Cheating...
750mhz for my phone ~
I can easily get 825mhz with my optimus v on aospcmod rom! but i have noticed only a couple random reboots. super stable at 806mhz
ccdreadcc said:
3600 mhz on my pc xd
Click to expand...
Click to collapse
hhhhhhhhhhhhhhh
very cool
do u use a fan from zalman ?
806 mhz....with devoid.franco and franco kernel...
729 wid devoidrom nd.franco kernel
My phone has always been stable on 806mhz. On any rom i've ever used. On some rom (don't remember which one..), I could go upto 825-844mhz too.. didn't test them much but they were stable for the 5-10 minutes i used them. Putting it on 864mhz caused the phone to hang..
alway stable on 806.4 MHz ( mik's 6.5.4 rom only )
Damn, mine crashes even @768 with devoid...
aaronbutton said:
I suppose over clocking to 135% of its rating sounds a bit much but if the gt540 can run the same cpu at 150% I dont think I could hit 806mhz before I went with the franco kernel. Such as with megatron.
The nook color is fitted with a 800mhz cpu and the over clock that can be achived on those now seems ridiculous. 1300mhz is 162% but some can reach 1600Mhz 200% check it out on http://www.youtube.com/watch?v=kCGTvxefPSc.
(I thought I'd use % to make things more comparable)
I'll be checking back for the P500 at 1.2ghz
Click to expand...
Click to collapse
hope you dont Kill your processor...
onlymeipse said:
Damn, mine crashes even @768 with devoid...
Click to expand...
Click to collapse
mine crashes on 787mhz with miks rom... 6.5.3...
dung_dung1341 said:
alway stable on 806.4 MHz ( mik's 6.5.4 rom only )
Click to expand...
Click to collapse
lucky you..!!
Related
does this app work on Streak?
I tried out and nope, it don´t work how it should. It says the Streak is running with 998 Mhz and you can´t overclock it. Waiting for update...
crazy cat said:
I tried out and nope, it don´t work how it should. It says the Streak is running with 998 Mhz and you can´t overclock it. Waiting for update...
Click to expand...
Click to collapse
998Mhz is the limit for the kernel. you need a kernel that can be overclocked for that option....
it works fine. at this moment in time you can not overclock but it auto detects settings just fine and you can set screen off speed/battery low speed to extend your battery life.
crazy cat said:
I tried out and nope, it don´t work how it should. It says the Streak is running with 998 Mhz and you can´t overclock it. Waiting for update...
Click to expand...
Click to collapse
Wait, u know there are three levels of clocking, right? one is under clock, one is clocked and one is over clock. There are two frequencies when u turn on the setcpu, one is max and one is min...but i would like to know if u r able to make the max and min both up to 998mhz so that it can run at full speed at all times
zgmf-x322a said:
Wait, u know there are three levels of clocking, right? one is under clock, one is clocked and one is over clock. There are two frequencies when u turn on the setcpu, one is max and one is min...but i would like to know if u r able to make the max and min both up to 998mhz so that it can run at full speed at all times
Click to expand...
Click to collapse
yes you can bro. both max & min are customizable from 24500Mhz upto 99800Mhz. however, ive found that having the streak running totally max when the screen on will simply drain your battery, there are no real speed improvements to be seen. a good compromise to combat lag would to be to set screen on: 76800 - 99800Mhz.
i completely downscale mine when the screen is off and although the battery life on the streak is good, doing this makes it even better. no lag when switching screen on either (frequency change)
Works great for me too! I don't see any need for overclocking a phone (unless you don't use it as a phone..)
I unplugged mine from the charger about 1.5 hours ago, still 100% battery..
thanks guys for the reply, appreciated it alot!
it does and very well
to get interactive setting you must at least have performance fix and it will let you overclock and add interacting setting i just did perf. fix and setcpu settings and now quadrant score of 1700+
Works great for me. Flash smokku and fard's djsteve kernal perfmod using clockwork or streak mod and then you can overclock using setcpu. Look at my signature line below.
Dell Streak, 2.2 froyo (318), custom kernel, OC to 1.2ghz, quadrant 2002, hspda signal mod,
Can someone pleaseee tell me whether is overclocking available for LG optimus one now?a
Sent from my LG-P500 using XDA App
Würde mich auch brennent interessieren!
Gibt schon einen dementsprechend angepassten Kernel?
mtbler said:
Würde mich auch brennent interessieren!
Gibt schon einen dementsprechend angepassten Kernel?
Click to expand...
Click to collapse
This is an english forum.
Please translate your post. That's the forum rule!
cheers
I used to try "SetCPU" App, but it's useless (maximum cpu at 600 MHz.)
It's available for the optimus s but until the kernel source is released for the t and the one overclocking won't be possible.
hostmark said:
I used to try "SetCPU" App, but it's useless (maximum cpu at 600 MHz.)
Click to expand...
Click to collapse
sorry but i using setcpu, and even if i set cpu to 128Mhz min, the min value is ever 240-245Mhz! So setCpu don't work!
theelle said:
sorry but i using setcpu, and even if i set cpu to 128Mhz min, the min value is ever 240-245Mhz! So setCpu don't work!
Click to expand...
Click to collapse
Do you have rooted device? You should have.
theelle said:
sorry but i using setcpu, and even if i set cpu to 128Mhz min, the min value is ever 240-245Mhz! So setCpu don't work!
Click to expand...
Click to collapse
Looks OK for me.
you can link me the program? i have a version of setcpu different from yours and i don't have the autodetect oprions!
edit. I have installed an old version, i have just installed the new version and all works i have only a question: is that possible see the current Mhz of cpu on home screen? with the widget setcpu see the min and the max but not the current...
Any news?
try going to androidcentral and then forums for LG optimus T(this the counterpart of our P500). c",?
Good news guys...
Hey theres a good news for all LG p500 users that u can overclock ur CPU up to 787 MHz.
For doing it u need a flashed device with rom running CM7 beta 6.2 which u can have here http://forum.xda-developers.com/showthread.php?t=946354
After flashing u will see an option for cpu configurations in settings where u can set ur cpu according to ur need but be aware u can set ur cpu upto 806Mhz but there the device crashes so please DONT select the option "set on boot" which will help u to escape from tough situations....
Which will restore u default frequencies.
Hope this helps you...
Happy flashing.!!!
Im using CM7and i ve overclocked my cell phone to 806MHz.............
and the benchmarks pumped to 1239.....
Good news...
Guys I flshed a new kernel to my phone....it was for the touchscreen lag fix... but it also made me possible to overclock my phone. setcpu couldnt reach beyond 600 mhz. now it reaches upto 864Mhz. though the device crashes on that....u can select lower frequencies below 806 to not get crashed... If anyone need the kernel file let me know and I'll upload it... I have optimus one Indian version... Happy overclocking.
shreyas.kukde said:
Guys I flshed a new kernel to my phone....it was for the touchscreen lag fix... but it also made me possible to overclock my phone. setcpu couldnt reach beyond 600 mhz. now it reaches upto 864Mhz. though the device crashes on that....u can select lower frequencies below 806 to not get crashed... If anyone need the kernel file let me know and I'll upload it... I have optimus one Indian version... Happy overclocking.
Click to expand...
Click to collapse
Please post the link here and do PM me the links to download. I need it. Thanks given for sharing your part of knowledge.
shreyas.kukde said:
Guys I flshed a new kernel to my phone....it was for the touchscreen lag fix... but it also made me possible to overclock my phone. setcpu couldnt reach beyond 600 mhz. now it reaches upto 864Mhz. though the device crashes on that....u can select lower frequencies below 806 to not get crashed... If anyone need the kernel file let me know and I'll upload it... I have optimus one Indian version... Happy overclocking.
Click to expand...
Click to collapse
Mate, do PM me the links.
here is the kernel
Okay buddy here is the kernel file...I assume that you know how to flash a kernel...if no, let me know indians are always ready to help buddy!
For those of you looking to Overclock, take a look at this guide, its very helpful imo.
-Sent from my Asus Transformer
Owner of Xperia X10 Stock Jit enabled/
Optimus One Overclocked w/ Megatron
Regards
antutu result
hereunder my lg p500 antutu score oc at 729 using nessy custom rom android 2.2.1
Puzzled.
sealtongue said:
hereunder my lg p500 antutu score oc at 729 using nessy custom rom android 2.2.1
Click to expand...
Click to collapse
Hey guys why the hell you aren't able to go beyond 800 MHz My Optimus one runs constantly on 806 with no crash...Can also run on 825 MHz but crashes after some long hours... Use SetCPU guys... this phone has much potential than 729 MHz
hey guys.
i have been wondering about this problem for a long time, and i could not find a solution to it. Thus, i wanted to ask you guys about it. The max i can overclock my phone to is 748. whenever i try to raise it to about 768 or 787, the phone will freeze and restart. is it due to the hardware limitations of my phone? or isit due to some software limitations?
Please help.
Just Hardware.
(I can overclock to 729 )
Hi. I'm still using Gingerbread stock rom 2.3.3 but with latest franco's kernel. My max. clock is 710Mhz. Anything above that, my phone will get freeze very often. Is there any recommendation on what should i set for my min. clock as well as the Governor?
SacredGuy said:
Hi. I'm still using Gingerbread stock rom 2.3.3 but with latest franco's kernel. My max. clock is 710Mhz. Anything above that, my phone will get freeze very often. Is there any recommendation on what should i set for my min. clock as well as the Governor?
Click to expand...
Click to collapse
I use the performance gov. and it's worked well.
SacredGuy said:
Hi. I'm still using Gingerbread stock rom 2.3.3 but with latest franco's kernel. My max. clock is 710Mhz. Anything above that, my phone will get freeze very often. Is there any recommendation on what should i set for my min. clock as well as the Governor?
Click to expand...
Click to collapse
I use stock 2.3.3 v20g + franco kernel and set max clock at 729Mhz, sometimes it freeze, but normally work fine (with any gov).
Each CPU is a little different. My OV is stable at 600 with smartassv2 but once I step it up to 729 the phone will randomly freeze or reboot.
Sometimes you get a good cpu that can be OCed a bit, and sometimes you get one that can go no further then stock. If you can OC then consider yourself lucky.
Whenever you try to increase the max frequency beyond a certain limit the CPU can not handle that and tells the kernel about that and kernel starts to Panic... (reboots or freeze)
For example My phone remains stable upto 768 MHz (usually i keep it at 748Mhz....)
but if i increase it to beyond 806 MHz it starts to panic...
Hardware
Has differences on hardware, already tried with 2 differents P500, one could overclock to 768 Mhz, the other can reach 800Mhz without freeze.
karven said:
Has differences on hardware, already tried with 2 differents P500, one could overclock to 768 Mhz, the other can reach 800Mhz without freeze.
Click to expand...
Click to collapse
Since all the p500 have same hardware, they can be OC to same max frequency if they have same software config...
806! never freezes but she gets warm! can get over 40 celcius
EDIT
Mind you i only get about 16 hours of battery life LOL
shubhamjain001 said:
Since all the p500 have same hardware, they can be OC to same max frequency if they have same software config...
Click to expand...
Click to collapse
where did u get ur facts?
are u smart or just effin noob?
yours preferred governors????
actually the best one is....
Dude keep it around 652 and interactive otherwise UR Battery will drain fast
depends on ur ROM+kernel combo.
on oxygen v1.1 i smoothly ran on 480-768 and battery lasted around 2 days with average use.
Now on Cm7 nightly, equally smooth at 729-480 and battery is awesome too..
Overclock
Ohhh!!! lucky guys.. my phone only accepts 672Mhz at max or anything above that value leads to rebooting or freezing.
Rom: Cyanogenmod 9 (Android 4.0.3)[BETA4]
Kernal: Franco Kernal - 4
OC: 480/672 Max
I get 748MHz completely stable when pushing "performance" governor with franco #4.
But irrespective, this is not about bragging...one would see LITTLE real life difference (save for frying the CPU faster) going above 672MHz. Don't just look at synthetic benchmarks...feel your phone.
Oh...and it was mentioned multiple times that 600->806MHz uses the same voltage hence the same power consumption for Sidestep CPUs.
I am running max CPU @ 729 and it has been running smooth for days with no freeze/reboots, I also noticed having the Governer on Performance has helped my battery life and such, i havent noticed the phone getting any warmer whatsoever so no problems with heat, Also I am using a LG-P504 Optimus One which Ive heard is the final release for this phone, so maybe its more stable than the pervious versions.
My p500 can handle 768 max. With some kernels 787mhz. But i am running 245-710 with miui v4: lol:
Sent from my LG-P500 using XDA App
Yea mine can handle that too but it drains my battery faster I've noticed. So now I run Max @ around 720 which seems quite stable!! Only time I use the nitrous feature also is with playing more top end games which I otherwise wouldn't be able to play without really low fps.
Sent from my LG-P504 using XDA App
Im using cyanogenmod nightly 7.2.0 build 34 on 748 mhz with any governer and it's working very well.OC also depends on ROM's.each ROM has different capabilities to OC...
Hello. I've downloaded setCPU today, and I wanted to overclock my CPU from 600 to 800MHz. But when i start up the setCPU it shows 600MHz as the max. freq, and I saw my friend overclocing his ZTE Blade to 1GB. My phone has the same CPU, and of course it's ROOTed. Please help!
cofface said:
Hello. I've downloaded setCPU today, and I wanted to overclock my CPU from 600 to 800MHz. But when i start up the setCPU it shows 600MHz as the max. freq, and I saw my friend overclocing his ZTE Blade to 1GB. My phone has the same CPU, and of course it's ROOTed. Please help!
Click to expand...
Click to collapse
Depends on the rom your using. Not ALL rom's support OC, or should I say kernel's.
Btw legends will NEVER OC to 1ghz, best you can expect is about 800mhz or so.
Sent from my HTC Legend using XDA App
ranger4740 said:
Depends on the rom your using. Not ALL rom's support OC, or should I say kernel's.
Btw legends will NEVER OC to 1ghz, best you can expect is about 800mhz or so.
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
Yep, can confirm that. My Device already crashes with about 768Mhz. The only ROM where overclocking worked for me was B 0.8.4.
Nuxil said:
Yep, can confirm that. My Device already crashes with about 768Mhz. The only ROM where overclocking worked for me was B 0.8.4.
Click to expand...
Click to collapse
NewSense RC4b has overclocking build in. (19,2 - 768Mhz) You don't even need an app. CyanogenMOD also has this build in: Settings -> Cyanogenmod settings -> Performance
QUBiCA said:
NewSense RC4b has overclocking build in. (19,2 - 768Mhz) You don't even need an app. CyanogenMOD also has this build in: Settings -> Cyanogenmod settings -> Performance
Click to expand...
Click to collapse
I know. But if i use these settings my device keeps rebooting until ich set CPU to 600Mhz. As i said, only Blayo's Rom worked with overclocking.
Overclocking is set in kernel i think. So switch kernel and try again.
I have your answer! Your rom is stock so the kernel was set to 600 mhz max. freq. Just install a rom which supports OC.
Hey guys I know this was already asked but still i didn't found an answer . Is there anyway to incrase your CPU limit . Mine it's at 729 . If i set it to 747+ it will block and reboot . So is there a way to incrase it ?
I'm using Kernel roq XIII+ .
The cpu in this phone is what I believe to be an Arm v6 Adreno GPU. The max overclock we can get on the phone (whilst stable 100% of the time) is around 748mHz. I've seen people with 806mHz at certain times using Rom and kernal mixups, like once when I used PerfectPeso and Francos Kernal. Weird occasions...
I'd say max for speed and so on, go 100mHz or around that for lowest, and 728mHz for highest clocks.
Sent via Tapatalk for Android (T-Mobile HTC MyTouch 3G Slide running HTC Update #5)
CJJames said:
The cpu in this phone is what I believe to be an Arm v6 Adreno GPU. The max overclock we can get on the phone (whilst stable 100% of the time) is around 748mHz. I've seen people with 806mHz at certain times using Rom and kernal mixups, like once when I used PerfectPeso and Francos Kernal. Weird occasions...
I'd say max for speed and so on, go 100mHz or around that for lowest, and 728mHz for highest clocks.
Sent via Tapatalk for Android (T-Mobile HTC MyTouch 3G Slide running HTC Update #5)
Click to expand...
Click to collapse
Dont underclock below 448MHz. All frequencies below that have the same voltage so its pointless as power consumption will be same. If you clock too low, it'll take more time to come out of sleep. And don't overclock above 748Mhz. If you consistently clock above 748, there is a high chance for kernel panics. I know a guy who did so and now even 748 isn't very stable for him.
That is not totally correct. 122 MHz uses a lower voltage than 245-480.
Sent from my LG-P500 using XDA
NeuDLi said:
That is not totally correct. 122 MHz uses a lower voltage than 245-480.
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
However it's slow and there is a reason why LG chose not to you it by default
Sent from my LG-P500 using XDA
So no one know if it's posible to incrase that limit ..?
Cresqo said:
However it's slow and there is a reason why LG chose not to you it by default
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
You mean in the same manner LG chose to use crappy default kernels with defective touchscreen driver, or a crappy GB firmware, yes? Sorry but what LG does or not does is simply irrelevant.
And I did not tell anyone to use 122 MHz, but it is possible and at least with screen off can't hurt. If you don't like it don't use it! But don't act like you knew better.
Sent from my LG-P500 using XDA
I use 480-748 with no problems on my current rom (Lupo's CM9 test), if your phone is unstable or simply reboots then you may wanna try another rom/kernel
With popdog's Oxygen rom (version 2.5 at least) I also had no problems with the same range.
See what CPU we have it's one 600 very stable. if you are clocking it more it will heat up that's why it reboots and some time it freezes. I would suggest you you to use it at 600 or you can go little upper side. But if you really want to over clock it high then it has some issues. There are extreme heat. battery drain. reboots. hang. it can break you sound and VGA chip...so do it wisely. in 600 LG P500 is very good.
Every combination will be different. Some CPU will handle higher clock speeds than others. The manufacturer only lets it pass inspection if it exceeds their minimum specs. That means there will be some that can handle more.
You will find out with use.
Your kernel and governor will also make a difference. So will the rom depending on the tweaks used.
Do you really need to clock it faster than that? The faster you go, the hotter you go, which shortens the life of the chip. Heat is the enemy.
Sent from my LG-P500 using XDA