[Q] cm7 install problems - Vibrant Q&A, Help & Troubleshooting

i install it exactly how the directions say but i keep having to restore in odin (and it takes a while idk why) but can anyone answer im trying to install cm7 version 20

u need to be on stock froyo before flashing cm7 with clockwork and remember in order for the cm7 to flash succesfully u need to wipe data, cache, and dalvik btw dont bother flashing build 20 because it have a bug that does not reconize ur sd card so u better off flashing the latest nightly

listen to kinz! sty the hell away from #20.
Easiest way to install cm7 is rom manager premium, easy as 1, 2,3,

I believe there is an error in the install directions as well. I could be wrong but I think you have to install cwm 3.x, although it says 2.x in the op. I have never been able to install cm7 the easy wayfollowing those instructions.
Beware of angry gingerbread man

Related

[Q] cant load clockwork with new official froyo

So i just updated to the new official and i HATE it
its slow buggy and crappy ( im even forced to keep fox news as a bookmark. Good lord)
I rooted it with oneclick and installed clockwork but no matter what i do it only boots to the samsung recovery mode. When im in there i cant run update.zip it says it cant fully verify
im at the point where i just want to throw this phone away.
1st im warning everyone to be sure they know what they are getting in to when they do the official upgrade and 2- im begging for help. What do i dooooo
http://forum.xda-developers.com/showthread.php?t=747335
use the third one on the page should say T MO JFD
odin back to 2.1 and flash a custom ROM
(like Team Whiskey's NERO ROM)
!!!!!!!!!!IM NOT RESPONSIBLE FOR WHAT MIGHT HAPPEN TO YOUR PHONE IF SOMETHING DOES GO WRONG!!!!!!!!!!!!!!!
Video of how to use ODIN
http://martint.net/2010/how-to-use-odin-to-go-back-to-stock-jfd-2/
Thank you!!!!
I will give it a shot right now and I'll let you know how it goes
(THANK YOU THANK YOU THANK YOU THANK YOU!!!!!)
Ok
So odin flashed and i'm back to 2.1 BUT even after installing clockwork, flashing clockwork recovery & rebooting into recovery (& reinstalling packages many times) it doesnt load to clockwork, just stock recovery manager
any ideas?
WEEEEEEEEEE!!!
Ok for anyone else in my situation do NOT use one click. use the update.zip method to unlock.
Run Odin and flash it to stock 2.1, put update.zip on your internal flash memory
After that delete update.zip, install clockwork & do your thing!

[Q] MIUI Install?

I've seen many different people say to install it different ways:
-Just install the rom
-Install CM7, THEN install MIUI
-Install OTB kernel before, install it after.
To be honest, I am completely confused. I would love to run MIUI but can't due to not knowing how.
I am currently running UKB 2.1 with Clockwork 3.0.2 (Red) and EB04.
Any and all help would be greatly appreciated.
Generally people try to use the first method. If they get an error 7 they then try to install 7/4 build of cm7, and wipe data& caches, and then install miui.
Remember, once you get cm7 or miui installed ONLY use the recovery you get through the reboot menu. Do not use three button method.
Sent from my I500 using XDA Premium App
Thanks! I took a nandroid just in case obviously but I'm not sure how useful that will be since I'm currently voodoo. Do I need to unvoodoo then nandroid, then flash? Or can I flash MIUI even though I am running voodoo?
Whatever state you are in when you make your nandroid, you need to be in when you restore. You definatley need to turn voodoo off before you try to install MIUI.
Disable it, boot normally, then reboot to recovery and start from there.
Alright, thank you. Here goes nothing. I'm about to try it and see what happens!
Do I just need to install the rom? Or do I install GAPPS after (say the one from the CM7 thread)?
GAPPS is included in MIUI rom, unlike CM7. I did not have to install GAPPS.

Some Assistance Installing CM7

Hey everyone, I would like some help from some of you and any input would be greatly appreciated
Im currently running a froyo rom 2.2.1 toxic 7 and it is a port of a i9000 rom so my phone is listed as i9000 in the settings. I tried installing cyanogen 7 the nightly build and one of the release candidates but i got a status 7 error on both of them
a quick google search tells me that because my phone is in i9000, it wont install so i was wondering if anyone had an idea of what to do? I tried installing cmenards overstock kernel but once I chose it from the install zip from sd, my screen was stuck on "Installing Update..." so after 30 minutes, I did a battery pull and it still booted into my regular rom.
So my question is, how could I get my phone to cyanogen 7? and if I have to go back to stock, how would I go abouts to getting cm7.
I would like to thank you in advance for reading this and any help is greatly appreciated
either odin back to stock or try to flash a vibrant boot gingerbread bootloader and then flash
Yea, like the guy above me said, odin to stock and then follow cm7 op instructions.... i always odin to stock before installing any roms, unless i happen to be on a rom that is a step in the ops instructions for flashing.
Sent from a cell tower to the XDA server to you.
odin to stock, copy the update.zip i've attached to your internal sd use it to flash the CM7 CWR.
Factory Reset
Mounts menu ---> Format System
Advanced menu ----> Wipe Dalvik cache
Flash CM7
Fix Permissions
Reboot enjoy.

problem flashing rom

why can't i flash rom's no more.
When i flash a new rom(froyo, toxic) i get :
formating update
formating system
formating data
deleting files
copying files
and then instalation complete en then it reboots and this is whithin a minute. And ofcourse the rom do not work correctly so i have to odin back to stock. I wipe and reset to factory, tryed other roms( zen, biwinning) same thing happens. Olso my nandroid backups will not work, they all hang at bali kernel screen(palmtree). So now i am stuck with stock waiting for a solution. thanks
After you ODIN to JFD... can you explain what steps you are taking?
The more detail, the better.
after i odin back to stock, i root the phone, install rom manager, flash clockworkmod recovery. If i do a nandroid restore i get samsung screen followed by bali screen with a female robot voice saying something about paritioning 2 min and counting then it hangs. I also do a wipe before the restore. If i flash a rom in rom manager or in recovery mode i only get wat i mention above, i do not get a loading bar. Thank you for the reply
Don't restore, your nandroid has voodoo enabled, likely causing issues.
Try this:
Odin to jfd (assuming you have no issues, if you do, try my )
download my option b update.zip (from noob guide) - this allows you to avoid ROM Manager/cwr.
Download a good ROM, I would suggest miui revamped or birgertime's cm7 build (my preference)
Download Bali for cm7/miui
Move all 3 to internal sd
Hold in both volumes + power (can be done with phone on after going to jfd and moving files to phone)
Release at vibrant screen
This is stock 2e recovery, reinstall packages (2x maybe)
Should be in cwr now
Flash ROM
Flash Bali
Reboot phone (don't do anything else)
After it boots, wait 10, reboot
Restore ONLY non-system apps, reboot
Enjoy bad ass phone.
Let me know...
Ok I will try this tomorrow, I will let know, thanks again.
For the roms you mention I do not need bootlaoders right.
Correct. That's about the most dangerous thing you can do also.
I flashed ss-6 miui. So far everything works, calling, sms/mms, even gps and wow this is a really nice rom. I am really happy now, stock is so boring and slow. But leaves me wondering why i could not flash froyo roms. Thanks and greetings from a happy island(aruba) i got a lot of custumizing to do so cheers
Glad you are up and running with my guide. You could repeat those steps with froyo roms, no problem
Sent using the XDA app.

[Q] Can't Install Roms - Phone is poorly.

I shall try to explain the situation best I can.
A long time back, I rooted my S2, then I thought I would sell it, so I wanted to put it back to stock and unroot, which I did.
Now months later, I decided to root the phone once again and put another rom on.
To cut a long story short, currently my phone wont accept any roms of any kind.
If I install CM7, MIUI, Sensation Rom, all of them seem to install a kernel as well, which causes the phone to panic upon boot. Which puzzles me, because if they are made for the S2, then why are they causing problems with my phone?
The only kernel that works for me so far is CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4. This allows me to access the internal SD via usb and put on roms. But I can't install them. As every time I do, I just either get a kernel panic or a black screen. I even used this guide, which should be foolproof and all I get is a black screen.
My phone has been in this useless state for 24 hours now and I've googled until I feel asleep at the keyboard.
Im hoping someone can seriously help me with this, as I don't pretend to know what I'm doing.
I was on ICS before this happened.
If you want your phone back then use the method in cnet to get it working again
and about the roms issue, did you factory reset and full wipe your phone before installing a rom?
I reset and wiped everytime. If I follow the cnet instructions to the letter, it just hangs on the Galaxy S2 logo when you turn on the phone and doesn't go any further. The only solution is to put on the kernel I mentioned above to get access to the SD card on my pc.
I now have managed to get CM7 RC working, but that's not the one I wanted. I wanted to use the Sensation rom, but that installs its own kernel which my phone, for some odd reason, doesn't like.
My phone details now are:
CM Mod 7.2 RC1
Kernel 2.6.35.14-g68ea119
[email protected] #1
1.Boot into recovery
2.Full wipe
3.Wipe cache
4.Advanced->Wipe dalvik cache
5.Install sensation rom zip only
6.Reboot
7.Wait for 5 mins
I followed your instructions precisely. I then installed SensatioN_ROM_3.0_ICS_i9100.zip from this thread
It installed, installed a kernel, flashed modem and said done. I then rebooted and waited.
It comes up with the S2 logo with the triangle, fine but now It just shows a battery symbol with a circle in the middle. After a while it goes to black and then comes back. Like its rebooting over and over.
I unplugged the usb cable and instead of the batter I just get the logo with the triangle. That stays there for a while, goes to black and comes back. Over and over.
I can't even get to recovery. Only thing I can do now is go into download mode and start over, put on the kernel I know that works, install CM7 RC1 and then at least I have a phone. But why sensation rom doesn't work is a mystery to me.
X82X said:
I followed your instructions precisely. I then installed SensatioN_ROM_3.0_ICS_i9100.zip from this thread
It installed, installed a kernel, flashed modem and said done. I then rebooted and waited.
It comes up with the S2 logo with the triangle, fine but now It just shows a battery symbol with a circle in the middle. After a while it goes to black and then comes back. Like its rebooting over and over.
I unplugged the usb cable and instead of the batter I just get the logo with the triangle. That stays there for a while, goes to black and comes back. Over and over.
I can't even get to recovery. Only thing I can do now is go into download mode and start over, put on the kernel I know that works, install CM7 RC1 and then at least I have a phone. But why sensation rom doesn't work is a mystery to me.
Click to expand...
Click to collapse
Don't install anything else
Repeat the steps without any modem or anything
Any try to redownload the zip
How do I stop the install of the modem? The thread only shows one zip file and if I install that in recovery, it installs everything. I can't chose what parts to install. Do I have the wrong zip?
X82X said:
How do I stop the install of the modem? The thread only shows one zip file and if I install that in recovery, it installs everything. I can't chose what parts to install. Do I have the wrong zip?
Click to expand...
Click to collapse
Just install this zip by the method above
https://docs.google.com/open?id=0Bzv8B0L32Z8lZ2hSanUtVHpSb0tFUlhkRVQ1RFhEUQ
Nothing else
While it downloads from google, I just want to clarify.
Wipe data, wipe cache, wipe dalvik. Then I go to install zip from sd. Find SensatioN_ROM_3.0_ICS_i9100.zip, then it installs. But the last time I did this, it scrolls up saying it was installing file system, then flashing kernel, then flashing modem.
Am I doing something wrong here?
And that google link is slow as hell, quoting me 7 hours to download it. Got it from hotfile instead, going to try that one.
X82X said:
While it downloads from google, I just want to clarify.
Wipe data, wipe cache, wipe dalvik. Then I go to install zip from sd. Find SensatioN_ROM_3.0_ICS_i9100.zip, then it installs. But the last time I did this, it scrolls up saying it was installing file system, then flashing kernel, then flashing modem.
Am I doing something wrong here?
And that google link is slow as hell, quoting me 7 hours to download it. Got it from hotfile instead, going to try that one.
Click to expand...
Click to collapse
Yes it should work like that if you have a i9100
Done exactly as you said. I downloaded it from the hotfile link instead and installed it.
Came up with the same thing.
Cleaning Old System files
Installing System
Data Files
Symlinks
Flashing Kernel
Flashing Modem
Ready
Then I reboot and the same looping over and over. Can't access recovery. Only solution is using odin to flash the kernel I used before and be forces to use CM7 since nothing else works.
It's so confusing as Im using the same hardware as everyone else on the sensation rom thread, but it wont work for me. at all.
you sure you have i9100?
GT-I9100
I'm totally puzzled. MIUI doesnt work, Sensation doesnt work and stops me from using recovery. The only thing that works is kernel CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.tar then install CM7 RC1 which upgrades the recovery to version 5 and the phone works. But only on CM7. If I try to install any other rom, it dies a death.
X82X said:
GT-I9100
I'm totally puzzled. MIUI doesnt work, Sensation doesnt work and stops me from using recovery. The only thing that works is kernel CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.tar then install CM7 RC1 which upgrades the recovery to version 5 and the phone works. But only on CM7. If I try to install any other rom, it dies a death.
Click to expand...
Click to collapse
And don't tell me that you flash cf-root after flashing every rom from recovery
No, I only flash that when the rom seems to corrupt it. Like when installing sensation. The only way I can access the SD card to put on another rom is to install that kernel.
X82X said:
No, I only flash that when the rom seems to corrupt it. Like when installing sensation. The only way I can access the SD card to put on another rom is to install that kernel.
Click to expand...
Click to collapse
This is really weird
Maybe someone else can help you
Sent from my x10i using Tapatalk
ok lets try again........
1: forget everything [ideas you have.]
2: go into clockwork recovery
3: format every partition including system / boot [remove your sdcard before starting]
4: use odin and flash stock 2.3.6 LA2 [u can flash whatever you like] and let it boot.
5: now use cf-root and root your device [http://forum.xda-developers.com/showthread.php?t=1103399 ]
6: i assume you know your way from here.
note: its very important to format system / boot partions
if yo dont have cwm or you want to try from scratch heres the latest cwm
http://www.mediafire.com/?wkki6xahfhb3bim
Thanks for info. Just to clarify, the cf-root link contains loads of different ones. How do I properly know which one to use or doesn't it matter? And as for the stock 2.3.6 LA2, again, where do I find that? Reason I ask dumb questions is I don't want to assume and try the wrong one and come back here and complain when it was my fault, I just want to be 100% sure, so again sorry for the obvious questions.
I flashed I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME then CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.
It seems to be working fine now with the default rom. However, when I go into recovery to say perform a backup or mount the sd card, It won't have any of it.
When I try to mount the sd card it just says "error mounting sd card" and when I mount usb storage it says "unable to open lunfile (no such file or directory)". So I don't want to try another rom yet.
X82X said:
I flashed I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME then CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.
It seems to be working fine now with the default rom. However, when I go into recovery to say perform a backup or mount the sd card, It won't have any of it.
When I try to mount the sd card it just says "error mounting sd card" and when I mount usb storage it says "unable to open lunfile (no such file or directory)". So I don't want to try another rom yet.
Click to expand...
Click to collapse
lol when i said or what you want i meant from GB you flashed a ICS ROM. well do this and this time just do what i say......
use odin again and flash XILA2 . after boot dial *2767*3855# [a must]
after reboot you should be running a problem free ROM.
now from CF-root find LA2 and flash that now play with it a while and than you do whatever as now you know where and how to get back to working ROM.
plus after LA2 you will find everything on your phone works so any problem you get on other roms is not hardware
recovery issues should be fixed now. otherwise use odin and again flash that cwm file i posted earlier. you wont loose root
Download ROM from Here

Categories

Resources