Hi.
1 question.
Is there a way to turn on usb debugging without accessing the settings? via USB cable or something..
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Same thing happened to me. I just reinstalled making sure all other programs were closed and I haven't had the problem since.
Hope this helps.
Install Kies .
Reboot phone
Start Kies
Connect Let KIES find phone .
Turn KIES off from taskbar .
Turn USB debugging on phone connect USB mass storage mode and let windows find driver .
That do work try all the other posts same subject for an alternative .
jje
No go
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
cablesguy said:
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
Click to expand...
Click to collapse
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
JJEgan said:
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
Click to expand...
Click to collapse
Yup, I did. I removed cables and turned on USB debugging, and tried the mass storage mode, upon connecting it says cable connected and to remove.
I'm getting this problem once I'm in Download mode. It's worked before... why would it stop?
Any tips?
I have the same problem
I seem to have the same problem I connect my phone via USB and get a USB Device Not Recognized message but MTP application opens on the phone. This has only just happened I have had it working before since I had the phone on 2 computers and have tried to different cables now it does not work on either computer. If any one has had any luck I would love to know how you fixed it.
Samsung Galaxy S2 - USB Device not recognized.
Hey Guys,
I have the same problem. I've even tried going into "Recovery" Mode and then running odin.. Still no luck. It just does not recognize the phone.
I tried a different cable but still no luck.
Guys,
i had had the same problem until i started to use the original USB cable(came with the phone).
Have a good luck!
Kirby
Got the same usb problem, different pc's, driver, cables nothing works.
After three month of use no Kies Odin ore mass storage us....big problem
any news info on this? seems to be quite common, though I only get it with stock roms, custom roms dont seem to have this issue
Cables Guy; I'm trying to figure out if I'm having the same problem as you. Does your phone charge when plugged in? Because mine does not.
i think in your case it might be the usb port in the phone itself, if nothing that you plug works well.
I believe there is an issue with kies/MTP and windows drivers for the rest though.
For me my phone doesnt get detected o nmy onboard USB but it does on the usb3 pccard i have.
any good news to solve this problems?
i got the same problem and worst case is my phone cannot detect sim
I had the same problem.. I just switched back to the original cable that came with the phone & problem was solved..
Sent from my SGH-T989D using XDA App
cablesguy said:
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Click to expand...
Click to collapse
whats your phone kernel? and are u able to connect to pc as usb storage? or did u flash anything weird before?
Hi.
Just bought Galaxy Ace for my daughter and faced with the same problem. it's at official 2.3.3 firmware, and each time i connect it to PC via USB - it enables the USB debugging. I tried disabling it in Settings->Application->Development when phone is disconnected - no luck.
Strange, but i don't see a "USB connection" option in Settings->Wireless and networks... it's there on my Galaxy S thou... May it be an issue with Ace's official firmware?
Update: flashed VillainROM-1.0 and still having same problem.
korvin1980 said:
Hi.
Just bought Galaxy Ace for my daughter and faced with the same problem. it's at official 2.3.3 firmware, and each time i connect it to PC via USB - it enables the USB debugging. I tried disabling it in Settings->Application->Development when phone is disconnected - no luck.
Strange, but i don't see a "USB connection" option in Settings->Wireless and networks... it's there on my Galaxy S thou... May it be an issue with Ace's official firmware?
Update: flashed VillainROM-1.0 and still having same problem.
Click to expand...
Click to collapse
It's in Settings > Applications > Development .
Sent from my Ultima Weapon using XDA App
EmoBoiix3 said:
It's in Settings > Applications > Development .
Click to expand...
Click to collapse
There's only a "USB Debugging" option, which, being disabled, gets automatically enabled again each time i connect the phone to a USB cable.
So what is the problem if it's enable? And Ace don't have "USB connection" option in Settings
Sorry, I thought it's obvious: with USB debugging always enabled - I've no possibility to connect the phone to PC as a disk storage or to connect it to Kies/PC_Suite
learn to know your phone
korvin1980 said:
Sorry, I thought it's obvious: with USB debugging always enabled - I've no possibility to connect the phone to PC as a disk storage or to connect it to Kies/PC_Suite
Click to expand...
Click to collapse
NO, is not obvious. USB debuggins doesn't botter your usb connection at all since you hace to activate the disk storage after you connect your SGA. Look on status, there's a message that tells you that you have to click there to activate mass storage. And on the other hand, KIES recognizes SGA after a few minutes, just wait a little longer.
i have the same problem. mass storage only works if you have the samsung drivers installed. if you connect the phone to a different PC that dosent have the samsung drivers it will not recognize it. if you disable Debugging so that the computer would detect it as a mass storage, once you connect it, it automatically enables debugging again. if you disable it while connected, it goes back on automatically.
i'm running 2.2.6 but i've always had this problem since 2.2
using windows 7
anyone can help?
USB mass storage worked fine for me on multiple computers without the drivers installed and with debugging on. There is no reason why either of those things would influence your connection. The problem is far more likely to be with either your computers settings or your usb hardware.
i tried on a few different computers, same problem. i guess i'm stuck :/
thanks anyway
dali47 said:
i tried on a few different computers, same problem. i guess i'm stuck :/
thanks anyway
Click to expand...
Click to collapse
Windows XP is fine. Windows 7 is very fussy: m.androidcentral.com/android-101-copy-files-your-storage-card-windows
Hello,
I want to get USB Debugging Mode Toggle..
I have enable USB Debugging Mode From Setting - Application - Development and Selected USB Debugging mode... When i connect my phone to pc.. on notification its show on USB Mode but not showing USB Debugging Mode..
How can i get USB Dubugging mode on Toggle.. Plz hellp me
There are a couple paid apps in the market if you search "USB debugging toggle". Not sure how well they work.
Sent from my GT-I9100 using xda premium
How can I do to connect my gs3 with USB Mass Storage? Because when I connect it to my PC nothing happen, but if I turn it down, it starts to charge.
I don't have any sdcard in the gs3, will be it the problem?
HELP ME, PLEASE!
PS: USB Debugging is turned off.
USB Drivers ???
JJEgan said:
USB Drivers ???
Click to expand...
Click to collapse
It's already installed.
All other Samsung's device connect normaly in my computer.
I disabled the Developer Options and now I can connect my gs3 as USB Mass Storage.