Hi.
Just bought Galaxy Ace for my daughter and faced with the same problem. it's at official 2.3.3 firmware, and each time i connect it to PC via USB - it enables the USB debugging. I tried disabling it in Settings->Application->Development when phone is disconnected - no luck.
Strange, but i don't see a "USB connection" option in Settings->Wireless and networks... it's there on my Galaxy S thou... May it be an issue with Ace's official firmware?
Update: flashed VillainROM-1.0 and still having same problem.
korvin1980 said:
Hi.
Just bought Galaxy Ace for my daughter and faced with the same problem. it's at official 2.3.3 firmware, and each time i connect it to PC via USB - it enables the USB debugging. I tried disabling it in Settings->Application->Development when phone is disconnected - no luck.
Strange, but i don't see a "USB connection" option in Settings->Wireless and networks... it's there on my Galaxy S thou... May it be an issue with Ace's official firmware?
Update: flashed VillainROM-1.0 and still having same problem.
Click to expand...
Click to collapse
It's in Settings > Applications > Development .
Sent from my Ultima Weapon using XDA App
EmoBoiix3 said:
It's in Settings > Applications > Development .
Click to expand...
Click to collapse
There's only a "USB Debugging" option, which, being disabled, gets automatically enabled again each time i connect the phone to a USB cable.
So what is the problem if it's enable? And Ace don't have "USB connection" option in Settings
Sorry, I thought it's obvious: with USB debugging always enabled - I've no possibility to connect the phone to PC as a disk storage or to connect it to Kies/PC_Suite
learn to know your phone
korvin1980 said:
Sorry, I thought it's obvious: with USB debugging always enabled - I've no possibility to connect the phone to PC as a disk storage or to connect it to Kies/PC_Suite
Click to expand...
Click to collapse
NO, is not obvious. USB debuggins doesn't botter your usb connection at all since you hace to activate the disk storage after you connect your SGA. Look on status, there's a message that tells you that you have to click there to activate mass storage. And on the other hand, KIES recognizes SGA after a few minutes, just wait a little longer.
i have the same problem. mass storage only works if you have the samsung drivers installed. if you connect the phone to a different PC that dosent have the samsung drivers it will not recognize it. if you disable Debugging so that the computer would detect it as a mass storage, once you connect it, it automatically enables debugging again. if you disable it while connected, it goes back on automatically.
i'm running 2.2.6 but i've always had this problem since 2.2
using windows 7
anyone can help?
USB mass storage worked fine for me on multiple computers without the drivers installed and with debugging on. There is no reason why either of those things would influence your connection. The problem is far more likely to be with either your computers settings or your usb hardware.
i tried on a few different computers, same problem. i guess i'm stuck :/
thanks anyway
dali47 said:
i tried on a few different computers, same problem. i guess i'm stuck :/
thanks anyway
Click to expand...
Click to collapse
Windows XP is fine. Windows 7 is very fussy: m.androidcentral.com/android-101-copy-files-your-storage-card-windows
Related
It happend after I flashed JK5 (I lost track with so many updates)
The phone is not recognized by windows anymore, cannot access odin or anything.
I have another vibrant and is still working so drivers are installed and everything.
The phone does recognize the connection, lets you choose, can get into download mode, but is just not being seen by the PC,
Since the other vibrant connects fine cable is also right, it is a problem strictly with this phone.
I tried flashing other roms, modems, and so on via CWM but problem is not solved.
Any help or ideas will be appreciated
I had the same problem. Someone said try usb debugging, & it worked like a charm.
Applications/development/usb debugging. I hope this helps.
Thanks, I tried that, and all the options for pairing without success
gagb1967 said:
Thanks, I tried that, and all the options for pairing without success
Click to expand...
Click to collapse
If USB debugging is enabled, it shouldn't give you a choice of usb connection mode. Make sure your USB cable is unplugged when you enable debugging, or else it will just tell you to unplug and try again.
bahnburner said:
If USB debugging is enabled, it shouldn't give you a choice of usb connection mode. Make sure your USB cable is unplugged when you enable debugging, or else it will just tell you to unplug and try again.
Click to expand...
Click to collapse
I meant to say, first i tried with debugging enabled, did not work, after that i disable debugging and tried Kies, Emdia Player and Mass Storage, still not recognized, also is not recognized when in Download mode.......
Any Ideas?
My phone does not connect to Samsung Kies via USB. I get the message:
"Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies."
How do I put this phone into Samsung Kies Mode?
It was doing this when I first got my phone then the other day it suddenly started working perfectly somehow, now I am getting this message again.
EDIT: [Solved] You have to disable USB debugging mode in order to connect to Kies.
Easy way turn phone off turn phone on fire up Kies then connect phone .
jje
Thanks, but I already tried that a couple of times...
turn off your USB debugging then close all running apps using task manager.
it will work then, Rumble
Thanks, worked right away!
BoogWeed said:
Thanks, worked right away!
Click to expand...
Click to collapse
Thanks from me too!
I had this trouble.. fixed it by moving the usb cable from the front ports to the rear USB ports of my box
faced the same problem ,, Galaxy S1 couldnot recognized by Kies , i used to go to setting->wirless and Network->usb setting ->change to kies
and make sure USB Debugging is checked
cheers
Ammar Ayed
I had the same problem for days with my desktop running vista 32. I must have removed and reinstalled kies and/or the samsung drivers in every permutation possible. Finally got it working by using a 2nd PC, my laptop. I installed kies on the laptop (also vista 32) and the connection worked on the first shot, so then I went back to my desktop and updated all the drivers for my SGS2 manually. When windows asked for a path to search for my drivers, I pointed it to the laptop's C drive inside of the Windows\System32 folder. The desktop apparently grabbed whatever the best drivers were from the laptop and I was off and running.
BoogWeed said:
My phone does not connect to Samsung Kies via USB. I get the message:
"Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies."
How do I put this phone into Samsung Kies Mode?
It was doing this when I first got my phone then the other day it suddenly started working perfectly somehow, now I am getting this message again.
EDIT: [Solved] You have to disable USB debugging mode in order to connect to Kies.
Click to expand...
Click to collapse
Settings->wireless and network->USB Settings and enable the Samasung Kies..
So dumb that we have to search and find options our self..Samsung is too stupid to provide the detailed explanation of issues and solutions...!
Rumble6059 said:
turn off your USB debugging then close all running apps using task manager.
it will work then, Rumble
Click to expand...
Click to collapse
I had this issue and Rumble6059 solution worked instantly.
There was no "thanks" option so just thought I would say thanks instead.
reddykcn said:
Settings->wireless and network->USB Settings and enable the Samasung Kies..
So dumb that we have to search and find options our self..Samsung is too stupid to provide the detailed explanation of issues and solutions...!
Click to expand...
Click to collapse
I do not have an option anywhere to enable kies on my phone running checkrom revolution 2.0 and hardcore speedmod kernel
equlizer said:
I do not have an option anywhere to enable kies on my phone running checkrom revolution 2.0 and hardcore speedmod kernel
Click to expand...
Click to collapse
I have a Samsung Galaxy S from Bell and do not have this option either.
Also, Kies only sees the device when the USB debugging is turned on but gives the "Reconnect the device in Samsung Kies (PC Studio) mode. ..."
So far, no luck and I'm stumped.
I've tried:
Rebooting laptop after Kies install
Disabling Symantic firewall
Rebooting phone
Connecting when phone is turned off - Kies does not see the device
Connecting with USB debugging turned off - Kies does not see the device
Verified that no apps are running (but a number of services are running)
Kies connection troubleshooting which reinstalls the drivers (this takes a LONG time!)
Details:
Model number: GT-I9000M
Firmware version: 2.1-update1
Baseband version: I9000UGJH2
Kernel version: 2.6.29 [email protected] #2
Build number: ECLAIR.UGJH2
Kies version: 2.1.0.11095_121
______________________________________________________________________
UPDATE:
On my model, the Kies option is buried down Settings->About Phone->USB Settings->Samsung Kies.
Turning this on did the trick after some "twiddling" (turning on off, backing out and in and watching Kies/Windoze update the drivers).
I seem to be good-to-go. Hope this helps others.
Cheers!
I don't see the Thank You button under your Post, so Thank you very much, it worked like a charm!!!!
Can't imagine that i faced this problem with my SG2 and the solution was simpler than i would think, i just changed the USB port where i connected my SG2; i.e. try to connect from another port.
I've tried all this and nothing works. It some times says connecting device but never does.
I have USB debugging off, tried turn on/off method. My phone is on 2.3.3 and I want to update it.
The phone has a picture of a USB and says connected. Says "press the home key to quit Samsung Kies"
Says MTP Application at the top.
This is all I get...
Second picture with error is what I got as I was typing this message.
I also get a pop-up saying Activating USB mode will deactivate BT, continue? Should I hit yes or no. I tried both and nothing works.
I'm on 2.3.4
I9100XXKI1
EDIT: after pulling the battery for 100th time it worked.
CANNOT CONNECT MY Galaxy Sii in Kies
reddykcn said:
Settings->wireless and network->USB Settings and enable the Samasung Kies..
QUOTE]
I don't have any "enable Samsunkg Kies" option on USB Settings..... does anyone knows how to solve my problem.
I alredy selected debbug, and then deselected, restarted the phone, and everything, and goes on stating "reconnect your device in Samsung Kies (PC Studio) mode. Current connection not supported by Kies".
How can I solve this problem??
Thanks to all for you hepl
Click to expand...
Click to collapse
suprodan said:
reddykcn said:
Settings->wireless and network->USB Settings and enable the Samasung Kies..
QUOTE]
I don't have any "enable Samsunkg Kies" option on USB Settings..... does anyone knows how to solve my problem.
I alredy selected debbug, and then deselected, restarted the phone, and everything, and goes on stating "reconnect your device in Samsung Kies (PC Studio) mode. Current connection not supported by Kies".
How can I solve this problem??
Thanks to all for you hepl
Click to expand...
Click to collapse
Turn debug [settings->applications->development->debug] feature off...
and connect your mobile ..
Click to expand...
Click to collapse
Can't connect to Kies - Connection mode not Supported
I already have debbuging off. and still no way to connect to Kies.
Any idea how to solve it??
Thanks!
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Same thing happened to me. I just reinstalled making sure all other programs were closed and I haven't had the problem since.
Hope this helps.
Install Kies .
Reboot phone
Start Kies
Connect Let KIES find phone .
Turn KIES off from taskbar .
Turn USB debugging on phone connect USB mass storage mode and let windows find driver .
That do work try all the other posts same subject for an alternative .
jje
No go
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
cablesguy said:
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
Click to expand...
Click to collapse
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
JJEgan said:
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
Click to expand...
Click to collapse
Yup, I did. I removed cables and turned on USB debugging, and tried the mass storage mode, upon connecting it says cable connected and to remove.
I'm getting this problem once I'm in Download mode. It's worked before... why would it stop?
Any tips?
I have the same problem
I seem to have the same problem I connect my phone via USB and get a USB Device Not Recognized message but MTP application opens on the phone. This has only just happened I have had it working before since I had the phone on 2 computers and have tried to different cables now it does not work on either computer. If any one has had any luck I would love to know how you fixed it.
Samsung Galaxy S2 - USB Device not recognized.
Hey Guys,
I have the same problem. I've even tried going into "Recovery" Mode and then running odin.. Still no luck. It just does not recognize the phone.
I tried a different cable but still no luck.
Guys,
i had had the same problem until i started to use the original USB cable(came with the phone).
Have a good luck!
Kirby
Got the same usb problem, different pc's, driver, cables nothing works.
After three month of use no Kies Odin ore mass storage us....big problem
any news info on this? seems to be quite common, though I only get it with stock roms, custom roms dont seem to have this issue
Cables Guy; I'm trying to figure out if I'm having the same problem as you. Does your phone charge when plugged in? Because mine does not.
i think in your case it might be the usb port in the phone itself, if nothing that you plug works well.
I believe there is an issue with kies/MTP and windows drivers for the rest though.
For me my phone doesnt get detected o nmy onboard USB but it does on the usb3 pccard i have.
any good news to solve this problems?
i got the same problem and worst case is my phone cannot detect sim
I had the same problem.. I just switched back to the original cable that came with the phone & problem was solved..
Sent from my SGH-T989D using XDA App
cablesguy said:
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Click to expand...
Click to collapse
whats your phone kernel? and are u able to connect to pc as usb storage? or did u flash anything weird before?
Hi, I have a problem connecting to Kies. I have been searching for hours over the internet for a solution but nothing worked.
Until yesterday I was connecting normally to Kies, syncing my mobile and checking for updates. Yesterday Kies gave me a message that there is a new update (for kies software), so I accepted the update and got the latest version (2.0.3.11082_152). Since I did that i couldnt connect my SGS2 to Kies again. It keeps on saying "connecting" on the screen but never ends and never show my SGS2 under "connected devices" .
I already have "debugging mode" unchecked. I used the option to update drivers several times. I tried to download Kies again at least 8 times (both the latest version as well as the original version I previously had), I tried unmounting my SD card, I tried several USB cables, but still getting "connecting" that stays forever.
BTW, I can connect to my PC in USB storage mode.
I have stock Android 2.3.3 with Kernel version JPKH1 (Arabic enabled).
I really appreciate any help from anyone.
I have read in many forums that I need to pick "Kies mode" by going to Settings>Wireless and network> USB settings. Well, on my phone when I go to Settings>Wireless and netwrok I dont have "USB settings" in the list but have "USB utilities" instead. Under "USB utilities" the only option I have is USB mass storage. IS THIS WHAT OTHERS HAVE ON THEIR SGS2s ???
same prob
Anyone, PLEASE....
waelnd said:
Anyone, PLEASE....
Click to expand...
Click to collapse
I have read in many forums
suggest if these forums know so much ask them as you are not getting an instant reply .
Under "USB utilities" the only option I have is USB mass storage. IS THIS WHAT OTHERS HAVE ON THEIR SGS2s ???
Off course thats what we all have your other forums are talking nonsense .
Suggestion turn phone OFF turn PC off reboot PC Reboot phone .
Start Kies connect Samsung USB cable .
Wait for Kies to connect .
jje
And make sure you run Kies as Administrator if you are running Win7
I used to have the same issue.
If you are using a 3rd party launcher, try turning that off and returning to touch wiz, as that caused issues for me, also make sure the phone is unlocked.
Failing that, turn the computer off, and plug the phone in, and then boot the computer back up, that might force it to install the drivers.
Same problem with me.i have win xp.but newer kies verson does not support sgs2.one another problem is i accidently uninstalled samsung usb driver for mobile phone.now i connect phone with pc via usb cable,the pc every time says fond new hardware and try to install it but could not sucseed.when i manually install driver,pc every time says "mobile phone has being used,eject the phone and reboot pc then install usb driver".where no phone is conected.why pc says eject phone where no phone is conected? Please help me please.
Sent from my GT-I9100 using XDA App
Saolved: Kies not connecting
Hi. To any who is faing this problem, here is the soultion that worked with me.
After trying everything, from rebooting PC and phone several times, using Kies "Resoultion Connection Eror" to download drivers many times, making sure the USB debugging is turned off from setting, etc,,,,, NOTHING WORKED
So:
1- I disconnected my phone from PC
2- I went to PC Control Panel>System and Maintenance>System>Device Manager
Under "USB Controllers" I didnt find anything with Samsung name. Instead, I found 2 entries under the name "USB Composite Device". Using right click I uninstalled them.
3- I reconnected my phone with Kies closed. As soon as I reconnected my phone, I had a message saying that Samsung Drivers are being added
4- I opened KIES, and Voila... my phone connected and I could see its name under Kies connected devices.
5- Now under Device Manager I can see "Samsung Mobile USB Composite Device"
My interpretation is that although I tried to update the Samsung drivers thru Kies many times, the drivers that already existed for the "USB Composite Device" (which I uninstalled in step 2) were forbidding Samsung drivers to take their place. So when I unistalled the USB Composite Devices everything worked the way ot should.
Hope this could help anyone who faces this problem.
Solved!!
Just go through the trouble shooting procedure which shows up on the screen when Kies is running and your device is not able to connect. It'll download some driver and automatically fix the issue.
Hi all,
When i connect my sgs2 to my windows 7 computer the phone says "MTP Connected" but nothing happens on my computer.
I reinstalled the stock rom from samfirmware.com.
What can be the problem ?
Thanks
mikeyv said:
Hi all,
When i connect my sgs2 to my windows 7 computer the phone says "MTP Connected" but nothing happens on my computer.
I reinstalled the stock rom from samfirmware.com.
What can be the problem ?
No search ???? MTP
Samfirmware problem ???
No USB drivers on PC ???
No Kies on PC ???
jje
Click to expand...
Click to collapse
I had the same problem with CM7 Rom that's why i reinstalled stock rom.
But few days ago everything worked ok.
Usb-debug on?
0815simon said:
Usb-debug on?
Click to expand...
Click to collapse
yes, everything is ok but somehow my ( and other ) computer cannot detect the phone
You need to turn off the usb debugging if you want to connect the phone to the Kies on PC. If it won't connect, check if you have windows media player 11 installed? It looks like Kies uses something from that program - I was able to fix the connection by installing the WMP11 for XP...
I am using windows 7.
New issue, even when removing usb cable, the battery status is "Charging"
hmmm, USB completely not working anymore ( hard to charge, remove battery for some time then boot, USB only charging no MTP )