[Q] Background data issue - Thunderbolt Q&A, Help & Troubleshooting

First time poster, long time lurker. To start, I'd like to thank all the devs who work so hard on the roms so many of us enjoy. Now on to the issue...
I'm running dasBAMF 2.0.6, the mr2 radio, and the kernel I'm using is 2.6.35.13-imoseyon-3.0.1GBtest1-hg928417061161-dirty. Needed to tether for the first time since getting my tbolt yesterday and it all works fine until my screen shuts off (locks). At that point my 3G data drops off and my tether loses Internet access until I turn my screen back on. I've poked around in my settings and was unable to find anything that seemed relevant to the issue. Anybody else encounter this and come up with a fix?

Suboof said:
First time poster, long time lurker. To start, I'd like to thank all the devs who work so hard on the roms so many of us enjoy. Now on to the issue...
I'm running dasBAMF 2.0.6, the mr2 radio, and the kernel I'm using is 2.6.35.13-imoseyon-3.0.1GBtest1-hg928417061161-dirty. Needed to tether for the first time since getting my tbolt yesterday and it all works fine until my screen shuts off (locks). At that point my 3G data drops off and my tether loses Internet access until I turn my screen back on. I've poked around in my settings and was unable to find anything that seemed relevant to the issue. Anybody else encounter this and come up with a fix?
Click to expand...
Click to collapse
The problem is with the wifi sleep policy I believe, I think there is a fix for it in his kernel thread. Not totally sure about it because I never really tether, but I have seen other people post about a fix for that problem, either in the kernel thread, or the bamf thread.

Thanks for the reply. Was starting to think it might be kernel related. Cheers.

Looking around for the tether fix, but so far I'm finding nothing. If anybody has a link for the thread, I'd appreciate it.

Suboof said:
Thanks for the reply. Was starting to think it might be kernel related. Cheers.
Click to expand...
Click to collapse
That's what I'm saying, i believe it is, check for the wifi sleep fix in the kernel thread, I think that's where it is.
It's not a tether fix, I think the file is wifi_sleep_fix.zip

Still having trouble locating either the tether fix, or as you said, the more likely wifi sleep fix (or similar). About to try a different kernel entirely and see what kind of result that may have. Appreciate the effort all the same, but I'm starting to think I'm either blind or said fix is no longer listed.
*EDIT* Looks like the functionality is baked into the kernel....
v2.8.1test1 (6/3/11) - 2nd attempt at screen off sleep for 3g/4g without breaking 2g.
Thinking that very well may be the source of the issue.

Issue is still ongoing with BAMF 2.1 remix. Tried numerous kernels with the same result. If anybody has any ideas I'm still all ears (or eyes I suppose). Additionally, with the phone plugged in and charging, the screen can go off and continue tethering with no issues. Have my wifi sleep policy set to never. Would appreciate someone verifying the same behavior on their device (ie data stops while tethering when screen goes off) just to verify it's not just me encountering this.

Related

Wifi shows connected but not...

Anyone else seeing this? I flashed to a new radio and rom day one and now I notice that the tablet will frequently loose its data connection even though it shows full wifi bars. A quick disable and reenable of the wifi radio resolves the data issue, but it's fairly annoying and I would love to make it go away. I have set the wifi to never sleep... that hasn't changed the symptoms at all.
Posting from my grab now, will get Roman and radio info in a moment and ammend post.
Thanks
Sent from my UPC300-2.2 using Tapatalk
Me too.
Yeah,.. I'm getting the same thing. Running Vegan 5.1. I've read around, but there doesn't seem to be a definitive solution. One solution I've seen was to switch to "Perehoots 3/27 kernel", but I'm new to the whole modding the G-Tab thing, so I'm not sure what's involved with switching kernels. If you or anyone else can help, I'm all ears.
Xard said:
Anyone else seeing this? I flashed to a new radio and rom day one and now I notice that the tablet will frequently loose its data connection even though it shows full wifi bars. A quick disable and reenable of the wifi radio resolves the data issue, but it's fairly annoying and I would love to make it go away. I have set the wifi to never sleep... that hasn't changed the symptoms at all.
Posting from my grab now, will get Roman and radio info in a moment and ammend post.
Thanks
Sent from my UPC300-2.2 using Tapatalk
Click to expand...
Click to collapse
I was unaware of a radio update for the GTab....where did you find one?
bump. I'm seeing the same issue with my new gTab. Also, I'm not getting notifications when the screen is off. related?

[Q] Maybe a potential fix for SOD(sleep of death)?!?!

Hi Guys,
Im no Genius when it comes to android, but I have done my fair share of programming before, but my SOD are killing me and a last resort is a warranty exchange as I cannot be without a phone.
So far I have been getting SOD about 5 times a day if not more, and I am one for tinkering with gadgets until i break or crash it, fix it and doing it all over again.
But anyway back on topic
I have noticed this in the build.prop
" persist.ril.mux.sleep=2 "
And so I wondered if this is causing my SOD, does anyone have any ideas regarding its uses?
Findings (as of 2155)
In my testing thus far I have changed it to "persist.ril.mux.sleep=1" using phone leaving it for an hour doing it over just for fun, And I have been SOD for 5 hours straight and haven't had any SOD or adverse battery drain
I mean this may not be the cause of the SOD for me, or anybody but I am up for trying just about anything
What is SOD?
Sent from my Motorola Atrix 4G using Tapatalk on AT&T, the company that disappoints me so much that I have to use my tapatalk signature to tell everyone
Sorry, Sleep Of Death
I have SOD here too. To me it's only happens when I turned off a data connection (3G or wifi).
I use LoadMonitor app as a workaround for a while, with success.
At now I'm using Neutrino 2.5 CM7 ROM with success too. I think it's more a blur rom problem than cm7 one.
Let us know about your progress.
So if you disable load manager you would get SOD?
I am making a script to update a few things so far no SOD for me, after a few tweaks
What settings are you using on load manager ?
Any info you can give me will help in me tracking down some of the errors and temporary fixes people are using to avoid the dreaded issue
Oh, THAT's what that was!
I forgot to turn the wifi back on a few nights ago when I said "Hey, let's watch some movies on netflix with my super-duper mirroring-abled phone!" So an hour into it, LBE Privacy warns me I'm about to max out my data, and I go turn the damn wifi back on but turned OFF the 3G.
Then last night I go to wake up my phone and the screen is "black but on", & took a couple of tries to wake it. I'm on Nottachtrix.
Harrison85 said:
So if you disable load manager you would get SOD?
I am making a script to update a few things so far no SOD for me, after a few tweaks
What settings are you using on load manager ?
Any info you can give me will help in me tracking down some of the errors and temporary fixes people are using to avoid the dreaded issue
Click to expand...
Click to collapse
I'm a bit confused here. I don't know what "load manager" is.
What a sad is I used LoadMonitor app (from market) as a workaround.
LoadMonitor just monitor taks that are running in your device. But it have an option that claims to prevent device deep sleep. So, when I checked this option my device don't get SOD.
It's a workaround, as I sad, and I don't know how LoadMonitor do that.
What is load manager?
Thanks
I had a similar issue, I installed SetCPU and set my minimum speed to ~456(faux 1.45 Kernel).
Never had the problem since.
cldot said:
I had a similar issue, I installed SetCPU and set my minimum speed to ~456(faux 1.45 Kernel).
Never had the problem since.
Click to expand...
Click to collapse
cldot do you use blur rom or cm7 one?
Thanks
My bad meant load monitor
Sent from my MB860 using xda premium
I tried some roms and the only one I hadn't random reboots was jokersax11 alpha7 (ICI), now I'm on beta 0.2.0 and had reboots.
I'm having the same problem. I've tried 3 different ROMs. I used Nottachtrix, following the directions to the letter with reboots and hard locks. Recently I flashed back to 4.5.91 (w/pudding) and I was having the same issues. I noticed that on the hard locks, my phone appeared to be warm, so I used SetCPU at 216MHz and still had hard locks and random reboots. I've not set the lowest setting at 301 and so far I haven't had any reboots, but its only been about 5 hours. But I was having them at least once every few hours.
BTW - I also noticed that I only had the freezes and hard locks when the phone was running on the battery. I rarely had problems when the phone was on the dock or USB charger, however, I did have reboots when it was on the wall charger.
Another program you can try is call 'Wake Lock' available from the marketplace. I haven't used it yet, I'm still experimenting with load monitor.
Wake lock has a few different options and has some really good review.
I confirmed that Neutrino 2.5 CM7 Rom works great without reboots.
That's a patch you need to apply to correct a battery drain problem of the original version. Notorious544d are working in a 2.6 version including that patch.
To me it's working like a charm. I'm testing for two days but, of course, everyone needs to test it in your own device.
PS: Follow this instructions to install a battery drain patch in Neutrino 2.5 (or wait for a 2.6 version):
http://forum.xda-developers.com/showpost.php?p=23179486&postcount=4258
Update 13/03/2012: Notorious544d released Neutrino ROM 2.5p with battery patch and some other things.
See you!
what patch?
marcosvafg said:
I confirmed that Neutrino 2.5 CM7 Rom works great without reboots.
That's a patch you need to apply to correct a battery drain problem of the original version. Notorious544d are working in a 2.6 version including the patch.
To me it's working like a charm. I'm testing for two days but, of course, everyone needs to test in your own device.
See you!
Click to expand...
Click to collapse
Could you point me to that patch? I can't seem to find it. Thank you
Sleep Of DEATH!!!
I was encountering that problem for a while but then I figured that something went wrong when I was flashing CM7 Beta. So I flashed Aura's ROM, and then Reflashed CM7 Beta and only experienced it once a month at most after that, Hope it helps
eNorby said:
Could you point me to that patch? I can't seem to find it. Thank you
Click to expand...
Click to collapse
Follow this instructions (or wait for a 2.6 version):
http://forum.xda-developers.com/showpost.php?p=23179486&postcount=4258
Update 13/03/2012: Notorious544d released Neutrino ROM 2.5p with battery patch and some other things.
Atrix SOD & Random reboots related to Wifi?
Does anyone know if the Atrix SOD & Random reboots are related to WiFi. I've had my wifi off all day and I've had no crashes.
I'm going to run it for a few more days without Wifi and see what happens.
I don't know about other guys, but wifi and 3G was the cause of my Atrix SOD and reboot problems.
Solved it using Neutrino Rom CM7 based.
See you!
Still working on my SOD issue, but recently, I disabled most power options, turned off wifi, rebooted and I've been running for 2 days with no crashes. After day 3, I'm going to turn wifi back on reboot and see what happens.
Update 1
After 3 days with wifi disabled, I've had no crashes, no freezes or random reboots. I'm going to enable wifi again and see what happens.
Update 2
After turning enabling my wifi and using it briefly then turning it back off, I had a random reboot later that evening.
The more I used my wifi, the more frequent my crashes became.
Interesting side note
I can enable all my radios when plugged into the desktop charger and I won't experience any crashes, however, if plugged into to the AC charger, I've had reboots and freezes.

[Q] Neutrino Wifi issue

Hi Guys,
i come from the Moto Stock Rom and have flashed Neutrino 2.6EE few days ago.
Now i've got a little issue with the Wifi Connection.
When I unlock the phone and a known wifi (home and work) is in reach, it takes about one minute until the connection is established.
With the stock rom ist takes only a couple of seconds.
When i go into the wifi settings while waiting, the connection will be established immediately.
Does anyone know a solution?
European Atrix
Wifi-Standby: off when display is off
Rom: Neutrino 2.6EE
Baseband: N_01.100.00R
I also have this issue with every CM7 ROM. I believe it is a bug present in all CM7 based ROM. Flashing a new radio or reflashing your old one may fix this issue, but I haven't tried it because I cannot find a working link to the N_01.77.30p radio for a backup in case of failure in the flashing of a more recent one. If anyone could provide a CWM flashable N_01.77.30p radio I could begin testing to fix this problem.
Sent from the Land of Multiple Cores.
try: http://forum.xda-developers.com/showthread.php?t=1339047
Me too, I used to experience the same problem with older versions of the Neutrino ROM but this new version is working flawlessly. Only one thing, when the screen is off for about 15-20minutes the wifi connection is lost so I keep a wifi settings icon handy on the desktop, but I noticed this issue on the CM7 roms too so it should be a bug there. On CM9 roms the wifi stays on during the whole time maybe try a cm9 rom?
Some reason when I click the download link nothing happens, if you could directly link the file that would be great.
Sent from the Land of Multiple Cores.
This has been discussed many times.
This is either a hardware fault or a CM7 bug. Therefore, I cannot fix it as Neutrino builds are based on CM7, and obviously, if it is a hardware issue, then there's nothing I can do at all.
For now, just pray that CM7 magically fixes it.
I am sorry, I mean no offense to your development, and since my previous post is incorrect or misinformed I am very sorry, and I will change my previous post to reflect this new information. Neutrino is an awesome ROM by the way.
Sent from the Land of Multiple Cores.
I will try a CM9 ROM to see if that fixes the issue. But I will not be able to flash for awhile since I am on a business trip. If someone else could try it out and report findings that would be great.
Sent from the Land of Multiple Cores.
I'm on Jokerz version 0.3ish and turning on wifi gives me an error report followed by random reboots. The problem did not originate with this ROM and I've flashed a handful of different ROMs with no fix.
I got smoked by Windows just for the free phone so I can sell it.
Notorious544d said:
This has been discussed many times.
This is either a hardware fault or a CM7 bug. Therefore, I cannot fix it as Neutrino builds are based on CM7, and obviously, if it is a hardware issue, then there's nothing I can do at all.
For now, just pray that CM7 magically fixes it.
Click to expand...
Click to collapse
So we have all this hardware problem?
Because I have the same issue with my Stock Rom 2.3.4.
What is your advice?Bring it to Motorola Support or wait in this "magical fix"?
This is most likely a hardware issue.
For the latest news regarding the issue check out this thread:
https://forums.motorola.com/posts/0c2f1387d6
If you are having this problem please post!
Cloudus91 said:
So we have all this hardware problem?
Because I have the same issue with my Stock Rom 2.3.4.
What is your advice?Bring it to Motorola Support or wait in this "magical fix"?
Click to expand...
Click to collapse
With the original rom version (45.31.1.MB860.NonEFIGSRetail.en.EU) that was on my phone, the Wifi connection was established much faster.
The second thing is, when I went into the wifi settings while waiting, the connection will be established immediately. It turns from searching to getting ip and then connected.
So I can't believe that this is a hardware problem. I think the phone is waiting for something before the connection will be made or so.
I've serarched a bit an found that:
Notorious544d said:
When your device is connected to Wi-Fi, then it will consume less battery as it needs less 'juice' to receive data from a Wi-Fi network than a cellular network.
However, if you are on 3G, but have Wi-Fi enabled, then your phone will consume more battery than with Wi-Fi disabled as the phone frequently scans for Wi-Fi networks. The scan time is configurable and stock ROM and CM7 scan every 30 seconds, whereas Neutrino ROM scans every 2 minutes. This means that Neutrino will have slightly better battery with Wi-Fi always enabled as it scans 4x less than normal.
To configure the scan time, you'll have to edit the build.prop.
...
Click to expand...
Click to collapse
I measured it again, how much time passes before the connection is available.
It takes about 2 minutes and 5 seconds, until the connection is there.
I think it is related to the scan-intervall.
Can you change the setting, that the phone will scan for wifi when it will be unlocked?

Wi-Fi issues

Hey guys, lately my wi-fi connection has been very slippery, as if it drops and then reconnects often, although it remains physically connected to my router. I don't know if it could be my router since every other device in my home is connecting to it fine. My phone is able to connect well to networks outside of my home, though, so I am unsure. Do you guys think it's the routers fault or maybe a kernel issue of some sort (I'm running stock kernel)? I've been having this issue on Tranquility and Viper ROM (maybe also on Mean) so it can't be A ROM issue. Any help would be appreciated. Thanks!
sounds like u have a gaf phone man.. if every other phone in ya house connects fine.. its not the stock kernel.. also the update we just had the OTA was supposed to fix wifi issues.. so u mite have something up with your phone.. alot of people had wifi issues that why they had a fix in the for it in the OTA we just got... my phone did the same ishh before the OTA now its fine..
I drop 3G like It's cool but that's sprints problem, never had that issue on WiFi. This phone has very powerful radios.
Sent from my EVO using xda app-developers app
Check your wifi settings and make sure that your wifi connection is set to never sleep. Also Check your wifi frequency band in "wifi advance settings" and make sure its set to 2.4 only. That might help.
#Root-Hack_Mod*Always\=LTE
I doubt my phone is bad since it can connect find everywhere else. I'll try those tips, thanks
Sent from my LTEVO
guih said:
Hey guys, lately my wi-fi connection has been very slippery, as if it drops and then reconnects often, although it remains physically connected to my router. I don't know if it could be my router since every other device in my home is connecting to it fine. My phone is able to connect well to networks outside of my home, though, so I am unsure. Do you guys think it's the routers fault or maybe a kernel issue of some sort (I'm running stock kernel)? I've been having this issue on Tranquility and Viper ROM (maybe also on Mean) so it can't be A ROM issue. Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
In wifi settings change the frequency from auto to 2.4 ghz. It fixed my wifi issues.
Sent from my EVO
guih said:
Hey guys, lately my wi-fi connection has been very slippery, as if it drops and then reconnects often, although it remains physically connected to my router. I don't know if it could be my router since every other device in my home is connecting to it fine. My phone is able to connect well to networks outside of my home, though, so I am unsure. Do you guys think it's the routers fault or maybe a kernel issue of some sort (I'm running stock kernel)? I've been having this issue on Tranquility and Viper ROM (maybe also on Mean) so it can't be A ROM issue. Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
There's an app in the Market called WiFi analyzer. U can use it to see what other wireless networks are operating in your area. It will also reccomend the best channel for your router to be on.
Sometimes there is a lot of interference on your channel and switching it will help or has helped quite a few people with your problem that I know of.
I had a problem at work with a linksys router not issuing an ip address to my phone consistently. What I did is take a screenshot of my ip address, subnet mask, DNS address defaults, etc. when u could connect. Then I made myself a static ip using that info. A good app that basically let's u run ipconfig and other network troubleshooting applications is an app called Fing.
I've worked on this issue far and wide. If the new ota didn't help and u still get random disconnects thru WiFi then u need to exchange your phone. It is actually a problem with the radio. My first EVO LTE did it and I could fix WiFi disconnects temporarily, but not permanently. This, my 3rd EVO LTE works great with no ota installed.
Good luck. Hope I was of some help. Pm me if u need more help.
Sent from my EVO using xda app-developers app
For me, I was on a different channel than my neighbors with no other wireless device ever had a problem in the 12 years I've been there.
What I do, Go into wifi advanced and click on the high-performance setting.
Only use it when needed as it burns battery.
Post back if it fixes the drop issue for you. Fixed it for me.
.,
Last night I flashed the awesome kernel and set the frequency to 2.4 seemed to go away. Today I flashed tranquility rls 1.a and I'm running it as is and having the issue again . I'll try out your suggestion throughout today and tomorrow, thanks for the tips guys!
Sent from my LTEVO
I've been hearing about people talking about the wifi issues since day one, but never actually run into them. The past few days though I've been trying to stream and download things (exporting through dropbox) over wifi, and OMG, what the hell is this? Every 2 or three minutes the connection just stops - the wifi bars at the top still show the wifi connected, but the the stream or download just stops. Sometimes it starts up again, sometimes I have to disconnect from the wifi and reconnect. And the whole time the wifi indicator doesn't indicate any loss of signal - once in a blue moon though you'll see it disconnect then reconnect. I don't want to hit that high-performance setting (although it seemed to help the in the limited time I used it), because it uses more battery. I thought the update was supposed to resolve these issues. I know I never had these issues before the update. None of the tricks mentioned in this thread seemed to help. Just wanted to report the issue in case some other people are having it also, and hoping an update will come out in the near future to resolve it. On Viper4G, btw. If have time at some point, I'll try to flash another rom to see if I get the same issue.
fachadick said:
I've been hearing about people talking about the wifi issues since day one, but never actually run into them. The past few days though I've been trying to stream and download things (exporting through dropbox) over wifi, and OMG, what the hell is this? Every 2 or three minutes the connection just stops - the wifi bars at the top still show the wifi connected, but the the stream or download just stops. Sometimes it starts up again, sometimes I have to disconnect from the wifi and reconnect. And the whole time the wifi indicator doesn't indicate any loss of signal - once in a blue moon though you'll see it disconnect then reconnect. I don't want to hit that high-performance setting (although it seemed to help the in the limited time I used it), because it uses more battery. I thought the update was supposed to resolve these issues. I know I never had these issues before the update. None of the tricks mentioned in this thread seemed to help. Just wanted to report the issue in case some other people are having it also, and hoping an update will come out in the near future to resolve it. On Viper4G, btw. If have time at some point, I'll try to flash another rom to see if I get the same issue.
Click to expand...
Click to collapse
It's kind of strange,mine has been dropping but the actual indicator in the status bar goes off when it does.I've seen it connect and disconnect 10-12 times per minute.I'm also running latest firmware/radios on the latest version of ViperRom.I'm also running Enoch's Kernel but not sure if I had the problem before the kernel flash or not.
im having the same issue. ive only really started noticing it because i was running chameleon pretty much since i got the phone and this never seemed to be an issue. now im on viper4g and my wifi will drop sporadically. it drops, i see the 3g icon for about half a second, and the the wifi reconnects. sometimes itll do it just once, sometimes itll do it continuously... the longest ive let it go before interfering is about 30 seconds. but my battery usage screen tells me that it goes on for way longer than that if left alone.
anyway, im on the lastest firmware, and i have the channel set to 2.4 (5 seems to knock everything in my apt, including my phone, off the router). i use the best wifi performance option sometimes, but as has been mentioned, it drains the battery. the phone wont sleep with that option checked. also, it seems to happen more frequently when im on the opposite side of my apt from the router.
ive read stuff about using a screwdriver to pull the antenna pins up a little, but that scares me. i dont really think that has anything to do with it anyway as ive tried that test where you squeeze the phone to see if your signal changes. it doesnt.
really, im kinda at a loss here. im thinking that i might try to exchange the phone if i cant get this figured out soon, but i dont want to do that if its something with my router or if the replacement is going to do the same thing.
I am using Viper 4G and have been having issues with my wifi connection dropping but more recently my phone has been restarting only while connected to Wifi. I haven't tried changing the wifi Frequency band to only 2.4GHz , but I will once I get home after work. I hope it works because its getting kinda annoying to have my phone restart so much while its just sitting idle.
I believe the rapid connect/disconnect issue some of us are having is also related to the phone not playing nice with particular routers. HTC referenced that fact when the 1.22 OTA came out. The changelog said the issue was fixed on how the phone communicated with certain routers and the disconnects should be eliminated. I can attest that the new update has made it a little better, but still not 100%.
The router at my work has been perfect, I've never disconnected from it once.
The router at my house is a whole different story. I have given up on downloading a ROM with my phone, directly to my phone. I will start the DL, sit the phone down and go do something, only to come back and find "download unsuccessful" every single time. I know it is because it is disconnecting. I can sit there and watch it happen.
The router at my friend's house is fine. Connect once, and never worry again the rest of the night. Obviously I need a new router. More obviously, HTC's software needs fixing. I shouldn't have to buy a new router just so one of my devices can stay connected to it.
Interesting seeing all these reports of dropped connnections with Viper4G. I've been running it for a few weeks and have never had a connection drop while it was in use on either the 2.4ghz or 5ghz bands of my d-link router. This thread over here suggests that replacing your Sense Settings.apk with an AOSP Settings.apk solves the problem for some people. I can't verify since I wasn't experiencing disconnects, but the AOSP menus are cool anyway
http://forum.xda-developers.com/showthread.php?t=1824465
My issues (detailed above) have apparently resolved themselves. I haven't lost connection once today, and I was streaming and downloading all day.
I don't see how this actually did anything but here's what I did. I decided to try another kernel instead of the stock one that comes in the viper rom. I knew the wifi fixes that HTC supposedly made were in the new kernel, and I knew I wasn't having any issues until I updated, so I thought I'd give a custom kernel (based off the old base) a shot, and play around with some new governors and overclocking while I'm at it. I did a nand backup and flashed awesome sauce. Wifi issues were gone, but I didn't like the kernel, stock seemed smoother. So i restored my backup, and for whatever reason, my wifi issues remained gone. Like I said, I can't explain it, but there you go.
Nice to know I'm not alone with this. My Wifi drops every so often, particularly at night time or with downloads. Hopefully HTC figured out a way to sort this out 100%.
Sent from my LTEVO
If you have a wireless router like myself that operates at two distinct bands, go into your Wi-Fi settings and choose the band that is at the higher range, and setting best performance is also a good idea, although this might result in greater battery drain. HTH!
Sent From My S-OFFed, R00ted, 100% Tricked-Out HTC Evo 4G LTE via XDA Premium!

Wifi stuck at "Wifi Turning on"

Hi guys I'm a newly registered user but by no means new to the site. I'm having trouble with my Thunderbolt's Wifi getting hung up on "Wifi Turning On".
To give you a background, I was using Licquid ICS MR2 when this all started. It ran flawlessly since MR2 came out and I flashed it. I tried fixing permissions, that didn't work. I've tried multiple radios to see if that would help, that didn't work. I formatted data and wiped dalvik and cache using ext4. Installed MR2 over again, still the same. I followed the same process and upgraded to MR3, still the same. I also tried ICY-S thinking maybe that version of the ROM was causing it. Still doesn't work. So i'm back to MR3 at this point. I still get 3G and everything else seems to work great.
The only thing that I've noticed that has been different is recently I started receiving 4G service in my area (small town). I've tried turning data off, tried turning LTE off. All with no luck.
Is there a chance that my wifi adapter could be damaged or does this sound like more of a software issue? Any help would be great.
Thanks
Pat
Yeah I have this problem usually after a while it does turn on but I think it's a bug in the leaked ICS build just wait for the rooted OTA to be posted and that'll probably fix it.
Link_of_Hyrule said:
Yeah I have this problem usually after a while it does turn on but I think it's a bug in the leaked ICS build just wait for the rooted OTA to be posted and that'll probably fix it.
Click to expand...
Click to collapse
Its a new problem though for me. It always turned off and on when I asked it to. The normal data problem where you have to turn wifi off and on again always happened to me but I knew how to handle that. This just started happening, I guess I'm not understanding how all of a sudden this just starts happening. I hope that rooted OTA comes quick.
redalertcavy said:
Its a new problem though for me. It always turned off and on when I asked it to. The normal data problem where you have to turn wifi off and on again always happened to me but I knew how to handle that. This just started happening, I guess I'm not understanding how all of a sudden this just starts happening. I hope that rooted OTA comes quick.
Click to expand...
Click to collapse
Tried the radio that santod posted. It gets me 1X that's it, but its pretty fast so there's no way its only 1X. But that didn't help the wifi cause any.

Categories

Resources