Related
I keep trying to uninstall hspl3 but it wont let me
i download the rom from the htc website and get the nbh file out of it, chance the name and then pu it on my formatted fat32 8gb sd card. but when i put it on my hd2 it gets stuck at the muliti coloured screen with serial on it.
PLEASE HELP
try smaller sd card. fair few people reported 8gb not working.
alternatively run hspl and choose your stock spl from there.
That worked
samsamuel said:
alternatively run hspl and choose your stock spl from there.
Click to expand...
Click to collapse
Reran the setup for HSPL3 and was able to uninstall as suggested.
How to get SPL 1.42
samsamuel said:
try smaller sd card. fair few people reported 8gb not working.
alternatively run hspl and choose your stock spl from there.
Click to expand...
Click to collapse
When I run HSPL3 again I can only choose 2.08 spl and I wanted to get back to the original 1.42 spl - any hints?
The reason is because I want to install the new official 3.14 rom from HTC and I've read that this is not so good with HSPL3 on the phone.
dan_p said:
When I run HSPL3 again I can only choose 2.08 spl and I wanted to get back to the original 1.42 spl - any hints?
The reason is because I want to install the new official 3.14 rom from HTC and I've read that this is not so good with HSPL3 on the phone.
Click to expand...
Click to collapse
The 2.08 SPL is also an official/original SPL version (don't choose SPL2.08 HSPL!!).
If you have 2.08 SPL, you can also upgrade safely to the new 3.14 ROM.
Grtz,
Degake
degake said:
The 2.08 SPL is also an official/original SPL version (don't choose SPL2.08 HSPL!!).
If you have 2.08 SPL, you can also upgrade safely to the new 3.14 ROM.
Grtz,
Degake
Click to expand...
Click to collapse
Thanks.
But can I, after I've used HSPL3 to install SPL 2.08, install an old official 1.66 rom with SPL 1.42? and will this remove HSPL3 and return my phone to SPL 1.42?
I asking because I've read on this great site, that the new rom 3.14 uses spl 3.03 and it's incompatible with spl 2.08 as well as with HSPL3?
dan_p said:
Thanks.
But can I, after I've used HSPL3 to install SPL 2.08, install an old official 1.66 rom with SPL 1.42? and will this remove HSPL3 and return my phone to SPL 1.42?
Click to expand...
Click to collapse
depends how you flash it, , over usb, hspl will remain, via sd card, hspl will be removed. You can also do it by running hspl2 and choosing 1.42.0000, no need to flash anything
I asking because I've read on this great site, that the new rom 3.14 uses spl 3.03 and it's incompatible with spl 2.08 as well as with HSPL3?
Click to expand...
Click to collapse
correct, you would show only 50 meg ram (I believe, i havent tried it yet, gonna wait till hspl or my carier version of 3.x comes out)
samsamuel said:
depends how you flash it, , over usb, hspl will remain, via sd card, hspl will be removed. You can also do it by running hspl2 and choosing 1.42.0000, no need to flash anything
Click to expand...
Click to collapse
Already tried to flash official 1.66 rom via sd card, but was unsuccesfull - no errors but nothing happened - didn't remove hspl3.
Can I use hspl2 on the phone eventhough I already used HSPL3?
sorry for all the noob questions!
dan_p said:
Already tried to flash official 1.66 rom via sd card, but was unsuccesfull - no errors but nothing happened - didn't remove hspl3.
Click to expand...
Click to collapse
strange, , freshly formatted fat32 sd card smaller than 8gb, correct?
Can I use hspl2 on the phone eventhough I already used HSPL3?
Click to expand...
Click to collapse
sure, the actual 2.08 spl/hspl contained in hspl3 is exactly the same as in hspl2, only difference is that hspl2 is more versatile (more spl/hspl options) and hspl3 supports telstra and tmous phones.
For regular hd2 users, hspl2 is the better option.
(Plus hspl2 detects what you currently have running, and offers you the opposite, so if it detects spl 1.66.0000 it defaults to offering you 1.66.hspl.
hspl3 on the other hand always offers you 2.08.0000 and many MANY noobs have just simply hit 'go' without changing the dropdown and then think they now have hspl installed, and they dont, causing much confusion and hundreds of 'oh my god it doesnt work' posts.)
samsamuel said:
strange, , freshly formatted fat32 sd card smaller than 8gb, correct?
Click to expand...
Click to collapse
Yes freshly formatted fat32 1gb card - and nothing. But I have the spl 2.08 hspl and not the spl 2.08 on the phone. Perhaps thats the reason?
I'll try and find the hspl 2 and see if I can change to spl 1.42 that way and then I'll install old stock rom 1.66 via sd to remove hspl and then upgrade to the new 3.14 rom.
Does this sound like an ok approach?
dan_p said:
I'll try and find the hspl 2 and see if I can change to spl 1.42 that way and then I'll install old stock rom 1.66 via sd to remove hspl and then upgrade to the new 3.14 rom.
Click to expand...
Click to collapse
if hspl has been removed you don't need to flash from sd card. the spl will be updated by normal usb flash. only need to use sd card if hspl is still installed.
just flashed mine.......great
I am having the same problem HSPL 2.08 and trying to flash from a FAT 32 2GB SD card with Stock rom 3.14 (LEOIMG.NBH) and I get to the grey screen saying loading and it just stays there.
Any advice?
I put on HSPL 2.08 (though Bootloader just reads 2.08).
Will try tnad flash to 1.42 using HSPL and see if I have any luck.
it doesn't "just read 2.08" it reads either 2.08.0000 or 2.08.hspl, there's a huge difference.
also, if you need hspl because there isn't a stock 3.14 for your phone, you should know that
o sdcard i that nstall 3.14 it won't flash anyway. (step one of sd card flashing is the spl gets updated to 3.03, second it checks the cid and region, finds they don't match, and you get rom upgrade code error.
if you use hspl to customruu install 3.14 it will install and run but be very buggy and only 60mb free ram because spl isn't 3.03.
Ok so I flashed my device to 2.08.hspl - 3.14 then installed happy days.
Not content I decided to run task29 then install 3.14 off the SD card. It got have way through and errored. It changed my SPL from 2.08.hspl to 3.03.0000 but gave a wrong ROM code error please try again.
I think I need to put on the stock rom (it's a stock HTC phone) but it wont accept the 3.14 I have nor the 1.48 I have downloaded.
I try to download 3.14 off the HTC software support site but it tells me that software is'nt for my phone?! it's a late 2010 model (got it mid nov 2010 already had 3.14 when I got it.)
I tried to revert it back to 2.08.hspl but HSPL3 wont recognise the SPL.
Any ideas?
YOU CANNOT INSTALL 3.14 USING HSPL - YOU GET LOW MEMORY AND UNSTABLE PHONE.
you now need to flash back to a correct stock rom. usb is fine, no need for sd card.
Thanks,
I've figured as much but when I try to install the correct stock rom (3.14.405.2 unbranded WWE) it wont load up!
Just does 1% then goes to the software update failed please try again.
so basically my question is what is the correct stock rom for me? because the Stock 3.14 and Stock 1.48 file I downloaded neither work!
Message on bootloader screen as follows -
RUUNBH
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP (LED) 0x05
MicroP(Touch) 0x05
Upgrade ROM Code Error
Please Try again
Just spoke with HTC informed I have a Swiss device!!!! so basically Exspansys sent me a swiss device with WWE 3.14 rom how the hell did they do that or why even?! any way i degress.
Installing the German 3.14 rom now seems to be working will then enternain thenotion of switching languages using goldcard....cherrs for your help.
no need for goldcard.
you already have spl 3.03.0000 from the german rom so just use SSPL to flash.
Tried 3.14 WWE using SSPL_RUU
It gives the usual 00028002 erorr (or 294 Invalid Vendor ID)
I was under the impression now I have a German HD2 with the correct German 3.14 rom with the correct 3.03 SPL I cant flash any other roms with out going down the HSPL route (which cannot be done correctly with 3.03 any way)
I want the stock WWE 3.14 rom and it looks like the only way is the goldcard method? Unless you have any ideas?!?!!?!?
Cheers
Hi i had my hd2 repaired by htc now the spl is spl3.03.0000
so the question is which hspl do i put on as i really am not sure thanks
anubis1126 said:
Hi i had my hd2 repaired by htc now the spl is spl3.03.0000
so the question is which hspl do i put on as i really am not sure thanks
Click to expand...
Click to collapse
There is no HSPL version present yet who is compatible with SPL 3.03
We need to wait sir
Ow Ps, do you have a Branded UK Orange device?
no its unbranded
Any updates on hspl for this yet
if its unbranded just flash a stock 1.66 to downgrade the spl then hspl as before.
Hi. I am on 3.14, i would need to downgrade too...
would this file i found online be good? :
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.0 ¶
7U_2.06.51.07_Ship
Its 1.66.404.1 but not 1.66.0000.. is this a problem?
I need to find a stock rom on NLD (dutch) to downgrade before putting my HSPL... Why is it so hard to find an original file from factory, say 1.42 in everylanguage?
And what is the difference by downgrading to 1.42 or 1.66?
Thank you kind sirs
1.66.404.1 is rom version,,, 1.66.0000 is the spl version.
yes that rom should be fine assuming you have an unbranded hd2. doesn't matter which you downgrade to, they both will allow hspl.
its not at all difficult to find them.
look for "leo official roms" thread, in rom development section, and in there, first post first link takes you to most of the roms.
Samsamuel, thx a lot for that positive answer HD2 is indeed unbranded.
makes me feel better, been in despair with my dutch HD2...
So its finally clearer to me, 0000 is SPL and XXX is rom version
But to Downgrade, a non SPL version is ok then?
But to install HSPL, i need an SPL version?
And one last thing, can i install all of this stuff without booting from SDmini?
Those were the old procedures, no?
Thx!
all stock roms come with a version of spl, but it doesn't say which spl in the filename.
1.43 and 1.48 roms come with spl 1.42.0000
1.66 and 1.72 roms have spl 1.66.0000
3.14 comes with spl 3.03.0000 and hspl doesn't work with it.
the numbers you see in the filename are rom (1.66.404.1) and radio (2.06.51.07) versions, not spl.
when you look in bootloader at spl, it will always end either .0000 or .hspl where 0000 is stock.
it doesn't matter which spl you have, so long as it isn't spl 3.03 then hspl will work and allow you to flash roms andradios.
Thx! Even clearer now
Unfortunately, i am currently on 3.14.. i tried installing a lower version ROM (1.66, the link i put earlier) but it didnt work..
How can i downgrade to those versions who enable me to use HSPL? Once u have a higher rom, it detects lower and u cant downgrade?
Is the only method to flash with SDcard?
zewill said:
i tried installing a lower version ROM (1.66, the link i put earlier) but it didnt work..
Click to expand...
Click to collapse
Then that isn't your stock rom. (Although you didnt say why it didnt work, , ) if its teh right rom it will work
I think i managed to install my English pack allright!
I installed the earliest official pack from HTC, rom 1.48
Then installed HSPL3, then my official HTC WWE 3.14 rom!
Confirmed, it works!!!
Again, Thank you for your time and your explanations of roms!
See you around on the forums, mate!
dont smile too soon, if you flashed a 3.14 rom whilst spl is installed then you will have memory and stability issues.
Go to
settings menu all settings system memory, what does it show for free program memory? around 50meg? should be about 140.
Couldnt really find "memory settings" but what if ound was this:
Total storage: 176 mb
Used storage 56
Free storage 119 mb
TOtal programm 208 MB
Used program 163 mb
free programm 45 mb
NO SD CARD (must buy one tomorrow lol)
So, as u said, its around 40 mb.. What should have i done better?
Also, what is the difference in the SPL?
I mean, from factory settings, i upgraded to 3.14.
With HSPL, i upgraded to 3.14
What difference does it make, isnt it the same? Doesnt 3.03 spl install itself?
Anyways, will be glad to hear your comments on my new problem then haha
not through usb flash. If hspl is installed it remains installed.
3.14 roms must have spl 3.03.0000
Before the 3.14 roms it didnt matter, all roms worked on any version spl, but the 3.14 roms dont.
You should have removed hspl first, (so that your spl ends .0000) then flashed the 3.14 rom, , this allows it to upgrade spl to 3.03.0000
Hhm, i really dont wanna brick my HD2 with all those stability issues.. is there a risk if i leave it like that?
Anyways, i'll restart the instalations then. I checked on bootloader, currently this is what i have: SPL-2.08 HSPL 8G XE
How should i proceed? Should i flash from SD card a 3.14 directly WWE? I have nothing yet on my HD2, (using 3.14 WWE official rom from HTC website) so i dont really care about flashing, reinstalling, hard resets
Just give me advice on how to proceed to have the perfect installation
Is a flash from SD card obligatory? But that would get rid of HSPL, no? and if i get rid of HSPL, my HD2 is going to go back to its original language (DUTCH), right? I want to avoid putting my HD2 in that language...
Say, if i SDFLASH the latest rom WWE (even though my HD2 previously to HSPL only accepted NLD (hence dutch) roms), will it work?
Sorry for taking up so much of ur time, but ur comments are so helpful
connect to usb, put the phone in bootloader.
then
run hspl2
choose 1.66.0000
when phone reboots, quickly hold voldown to reenter bootloader
run the 3.14.exe
Thx for the quick reply.
Why would i use HSPL 2 now, i was using the HSPL 3 before? Isnt it the latest most stable one tu use?
Can i still run HSPL3 and choose 1.66? (i think not actually i only had choice of 2.08)..
So can i run HSPL3 and then re run with HSPL2??? It wont have compatibility issues?
And how to install the exe while in bootloader? Is it a flash from SD Card?
What will happen if i leave my 3.14 in the 2.08 SPL? only stability issues? No risk of bricking, or long term affecting negatively the phone?
So many questions.. hope u can answer all of them..
Also, one last big question: Now that HSPL is installed, isnt it easier to simply, when i recieve my SD card, to flash a WWE official rom 3.14? wouldnt that do the trick? Or i need to go through HSPL2 for sure?
Thx again!
the .exe's are just installers, the spl/hspl inside is the same. So, the 2.08.hspl in hspl3, the actual code that gets flashed to your bootloader, is IDENTICAL to 2.08.hspl in hspl2.
But, hspl3 only has 2.08.0000 and 2.08.hspl as options, but since spl 2.08 isn't stock for your phone, if you ever needed to get back to stock, you can do that with hspl2, but not hspl3, so since the one version of spl/hspl that they both contain (2.08) is teh same, and hspl2 has extra options for a non tmous user, why use hspl3? there is no reason.
Oh, and whilst we're at it, hspl2 detects which spl you currently have and offers you the opposite (so if it finds 1.42.0000 it sets the dropdown to 1.42.hspl)
HSPL3 doesnt do this, it always offers you 2.08.0000 until you manually change it, and many a newb has just clicked OK and thinks they have installed hspl, when in fact they haven't.
Lol, i be one of the many noobs.. But in my bootloader, it says i have installed HSPL, so.. i guess its installed!
Will follow your recommendations, but just one last thing
How to remove this current HSPL3 then and restart the steps with HSPL2? You said that
"But, hspl3 only has 2.08.0000 and 2.08.hspl as options, but since spl 2.08 isn't stock for your phone, if you ever needed to get back to stock, you can do that with hspl2, but not hspl3, so since the one version of spl/hspl that they both contain (2.08) is teh same, and hspl2 has extra options for a non tmous user, why use hspl3? there is no reason"
I used HSPL3 because i read on forums thats its better to use the latest HSPL as the previous versions usually are out of date.. seems i was mistaken then... Also, i used HSPL3 because it was compatible with any 1.XX rom, and i could only downgrade as low as 1.48. Would HSPL2 be able to be installed on 1.48 official rom? I thought highest HSPL2 could work on was 1.42?
So you say that now that i have installed HSPL3, i cannot go back to stock? Im sure there would be a way, but what should i do then?
Should i just flash some stock rom from SD card, hoping it takes HSPL3 away, and restart procedure with HSPL2?
Or with USB sync i can restart the procedure, by just openiong HSPL2 without touching any rom?
i am a noob to all this..please help..All i wanted is to install android on my htc hd2..
what i did is installed spl 2.08 after that i am upgrading radio to Leo_RADIO_2.15.50.14** tried a lot but always stuck at 0 % then an error came 276..
please help me to install the radio so that i can install android..
you failed to install hspl, i'd bet a weeks wages you didnt change the dropdown from 2.08.0000 to 2.08.hspl, , you have successfully installed stock spl.
earlier i was SPL 1.42.0000 but now my device has..SPL 2.08.0000...now what to do..
cybertron_001 said:
earlier i was SPL 1.42.0000 but now my device has..SPL 2.08.0000...now what to do..
Click to expand...
Click to collapse
1.42.0000 = stock
2.08.0000 = stock, ,
forget about hspl3, its for tmous users really, , more options on hspl2 PLUS it doesn't do what hspl3 has done to you, hspl2 is better than hspl3
run hspl2 and choose either 1.42.hspl or 1.66.hspl or 2.08.hspl
cybertron_001 said:
earlier i was SPL 1.42.0000 but now my device has..SPL 2.08.0000...now what to do..
Click to expand...
Click to collapse
Use HSPL2_RUN.exe (here) and select 2.08.HSPL
Thank you for your help guys..
one more question...i just installed android on my storage card...bur whenever i restart it opens wm 6.5 not android then i hv to open android manually...is there a way to select android while starting the device..
Does anyone have this version, there is another thread, but the download link is not valid anymore.
Thanks in advance!
may i enquire why you need it?
If you think you need it so you can instal hspl, you don't. Just use hspl2 or 3 or 4. (See my sig)
Yes, that was my intention. Am i going to be able with HSPL 2,3,4 to install NAND Android?
Edit: I've tried earlier, but the current SPL is 3.14, and it's not supported by HSPL 4.
Yes it should, 3.14 roms come with spl 3.03.0000 which is supported by hspl4.
ordevski said:
Yes, that was my intention. Am i going to be able with HSPL 2,3,4 to install NAND Android?
Edit: I've tried earlier, but the current SPL is 3.14, and it's not supported by HSPL 4.
Click to expand...
Click to collapse
Just download hardspl4 and it would do the trick without a problem... you can download from " SamSamuel" sig ... its HSPL4
Thank you guys, I did it.
Long story short, i was working on a new bootloader for HD2 and was testing the functioning of smem and my memory binaries, they seem good but i chose the wrong address to test them on. The address i picked was 0x0000219 which is actually the SPL partition. Now call it my luck or whatever, the only thing i damaged was the HTC logo during flash. So i've decided to flash a stock ROM through sdcard to replace SPL and also fix bad blocks which have developed after countless hours of developing and testing and flashing on HD2, Before i go on and update to an official SPL (ofc im running 2.08HSPL to be able to include a custom compiled ARM binary)
As i've read in some posts, once i upgrade to an OSPL (official) > 2 i will never be able to downgrade, no matter what. The stock SPL which came in with my device was 1.66 and i flashed 2.08HSPL to it.
1) What SPL is included in the official 3.14 WM6.5 ROM ?
2) Will i be able to downgrade to like 1.66 (My Stock) or install 2.08HSPL with it ? and if yes then how ?
I write here cause, i don't want to join the "Bricked my phone" club
I'm not sure about downgrading to 1.66, since I use TMOUS, but returning to HSPL shouldn't be a problem. The newer HSPL4 installer reads as follows:
1) To install this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
I've repeatedly switched between 2.10.0000 and 2.08.HSPL with no problems.
BTW, I'm suffering from bad block problems and reverting to stock by SD method did nothing to fix mine. If you figure out a better way I'd love to hear it!
1) 2.08-2.10 for EU and 3.03 on TMOUS.
2) Yes, using HSPL4 you'll be able to downgrade and flash HSPL from official SPL's
Kefir.net said:
1) 2.08-2.10 for EU and 3.03 on TMOUS.
2) Yes, using HSPL4 you'll be able to downgrade and flash HSPL from official SPL's
Click to expand...
Click to collapse
Wrong, there are NO EU roms that use 2.x spl. The EU spl path jumped from 1.66.0000 to 3.03.0000
Only tmous stock roms use spl 2.x
@op, ,,
1 3.03.0000
2 yes
Yes, Sam is quite correct!
samsamuel said:
Wrong, there are NO EU roms that use 2.x spl. The EU spl path jumped from 1.66.0000 to 3.03.0000
Only tmous stock roms use spl 2.x
@op, ,,
1 3.03.0000
2 yes
Click to expand...
Click to collapse
Also, just to clarify, the current stock SPL for tmo is 3.03, so if you're flashing stock for RMA or something like that on you're on tmo you can flash the 3.14 ROM with 3.03 SPL and be fine.
For Android/WP7 to function, you must be on HSPL 2.08