Hello all,
I was using this rom: http://forum.xda-developers.com/showthread.php?t=1002836
for a few weeks and all was working fine until today. All just worked fine until some moment that all stoped to work. Now i dont have any service anymore and when i try to reboot it and it starts again i get:
-No widgets load
-"Process system is not responding" Force close or wait.
-Cant boot into xRecovery
-Flashtool wont recognize the phone
-phone keeps making notification sounds for no reason
-i get no service
-cant connect to wifi
-wont recognize SD card
-randomly freezes
I found on this forum that this problem causes because i install a new busybox thats what created this error. But i cant get back in to xrecovery again or back to my SD card since my pc doeosnt connect to my phone. So also SEUS doesnt connect, what can i do to reset it all or atleast to get back into xrecovery?
Yours,
anyone have any solutions? i'm in the same exact boat.
Try reinstalling xrecovery from flashtool. You should be able to even with force closes.
Sent from my X10i using XDA App
Go to Application -> Dev Tools -> Bad Behavior -> Crash the system server then reboot. Give it a few minutes to settle then if that doesn't work, download xrec v0.3 from below. If xrec installs then wipe cache & clear Dalvik cache. If none of those work you have no choice but to reflash.
http://www.mediafire.com/?eyihuzn4h96xw4c
Hi I had this exact same problem so I reflashed but now I can't get rooted. Can anybody help me root?
06bgoggin said:
Hi I had this exact same problem so I reflashed but now I can't get rooted. Can anybody help me root?
Click to expand...
Click to collapse
How exactly are you trying to root? Have you tried the flashtool, z4root or super one click?
Sent from my X10i using XDA App
Lockon Stratos said:
How exactly are you trying to root? Have you tried the flashtool, z4root or super one click?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I've tried all of them. Flashtool has always worked for me in the past but all I can do on it at the moment is flash the stock firmware it won't let me click the root option.
Z4root would go through everything but then when I donloaded busybox it said I wasn't rooted.
And with super one click it would spend for ever trying to find the device, never find it then the programme would freeze.
Do you have any other ideas?
06bgoggin said:
I've tried all of them. Flashtool has always worked for me in the past but all I can do on it at the moment is flash the stock firmware it won't let me click the root option.
Z4root would go through everything but then when I donloaded busybox it said I wasn't rooted.
And with super one click it would spend for ever trying to find the device, never find it then the programme would freeze.
Do you have any other ideas?
Click to expand...
Click to collapse
Z4root & Superclick are my backup procedure in case I'm not infront of a pc and I always use the flashtool to root.
Are you sure usb debugging is enabled? I know I've made that mistake before then realized that it wasn't enabled. Stock 2.1 does not enabled this function by default as far as I know.
Sent from my X10i using XDA App
Lockon Stratos said:
Z4root & Superclick are my backup procedure in case I'm not infront of a pc and I always use the flashtool to root.
Are you sure usb debugging is enabled? I know I've made that mistake before then realized that it wasn't enabled. Stock 2.1 does not enabled this function by default as far as I know.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Yeah I made sure I wasn't making that mistake I've tried turning usb debugging on the plugging in my phone, plugging in the phone then turning on usb debugging, I have no idea whats going on. It has really confused me :/
06bgoggin said:
Yeah I made sure I wasn't making that mistake I've tried turning usb debugging on the plugging in my phone, plugging in the phone then turning on usb debugging, I have no idea whats going on. It has really confused me :/
Click to expand...
Click to collapse
BTW what firmware are you using? If you are still on the branded firmware that might be the reason why so flash a generic 2.1 firmware then try rooting again. Here's an example:
http://forum.xda-developers.com/showthread.php?p=15711725#post15711725
If you look at the last few posts Uberlight25 was using branded firmware and had the same problem as yours. After flashing generic 2.1, he/she was able to root again.
Good luck.
Lockon Stratos said:
BTW what firmware are you using? If you are still on the branded firmware that might be the reason why so flash a generic 2.1 firmware then try rooting again. Here's an example:
http://forum.xda-developers.com/showthread.php?p=15711725#post15711725
If you look at the last few posts Uberlight25 was using branded firmware and had the same problem as yours. After flashing generic 2.1, he/she was able to root again.
Good luck.
Click to expand...
Click to collapse
Thanks but I worked out that the problem was that I didn't have the debug driver installed, I fixed this by reinstalling PC Companion
Cannot flash x10, driver missing
Metalbuster said:
Hello all,
I was using this rom: http://forum.xda-developers.com/showthread.php?t=1002836
for a few weeks and all was working fine until today. All just worked fine until some moment that all stoped to work. Now i dont have any service anymore and when i try to reboot it and it starts again i get:
-No widgets load
-"Process system is not responding" Force close or wait.
-Cant boot into xRecovery
-Flashtool wont recognize the phone
-phone keeps making notification sounds for no reason
-i get no service
-cant connect to wifi
-wont recognize SD card
-randomly freezes
I found on this forum that this problem causes because i install a new busybox thats what created this error. But i cant get back in to xrecovery again or back to my SD card since my pc doeosnt connect to my phone. So also SEUS doesnt connect, what can i do to reset it all or atleast to get back into xrecovery?
Yours,
Click to expand...
Click to collapse
I have the exact same problem. Did you solve it?
I device maneger SEMC USB Flash show up with a yellow warning sign that indicate that drivers are missing. I have tried to install SE companion but that did not help. Also I cannot flash to a stock rom via SEUS.
Someone suggested to install xrecovery again ... but how?
/anders76
Related
I just flashed my x10 mini using flash tool (upgrade to 2.1), i followed the instruction until it say finished and unplug the usb conection.
But after i pushed turn on button, the LCD only shows light (about 5 second) and then off, and countinue on and off (no SE text / logo).
I have tried some solution with SEUS and PC Companion, even try to reflash, but none of them sucsesfull.
Any solution, thanks...
Sent from my GT-P1000 using XDA App
You could see if anything in this post helps you
http://forum.xda-developers.com/showpost.php?p=14814786&postcount=11
What ? A red or green led if its red your phone is flat ! But it couldn't be that
sent from this midget x10 mini pro using cm7.2.3.3 14.5
I think you can re-flash the phone... it could be the solution.
kormatoes said:
What ? A red or green led if its red your phone is flat ! But it couldn't be that
Click to expand...
Click to collapse
I mean the LCD, it only become bright-gray light (right before SE text appear), but stuck there about 5 second, then off, and on again, continuously.
thekindladies said:
You could see if anything in this post helps you
http://forum.xda-developers.com/showpost.php?p=14814786&postcount=11
Click to expand...
Click to collapse
I will try this, but FYI
I still can flash my phone, it detected in my PC while I press back button and plug the USB, and the flash successful and told to unplug the USB, but again when push the power I still got the some problem. I have tried this for 3-4 times.
Using SEUS, it still can detected my phone, and search for update, but told something like my phone have the last updated.
Is the SE text / logo appear while we charge it on power off? (coz while I charge it, the LCD only got bright-gray light)
I just brought this phone few days ago from my friend, haven't charge it while power off.
Pc companion and seus are not the same thing just start again with seus
zorro83 said:
I mean the LCD, it only become bright-gray light (right before SE text appear), but stuck there about 5 second, then off, and on again, continuously.
I will try this, but FYI
I still can flash my phone, it detected in my PC while I press back button and plug the USB, and the flash successful and told to unplug the USB, but again when push the power I still got the some problem. I have tried this for 3-4 times.
Using SEUS, it still can detected my phone, and search for update, but told something like my phone have the last updated.
Is the SE text / logo appear while we charge it on power off? (coz while I charge it, the LCD only got bright-gray light)
I just brought this phone few days ago from my friend, haven't charge it while power off.
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5 Oc by slade87
Download the latest version of SEUS,u said it detects the fone so that good, now when it says your up to date, there 'll be an option like update anyway....try this...
Problem solved.
Keep trying used SUES, more than 20 times, than tadaaa... it successful.
Thanks guys.
Really appreciated it...
Good stuff
zorro83 said:
Problem solved.
Keep trying used SUES, more than 20 times, than tadaaa... it successful.
Thanks guys.
Really appreciated it...
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5 Oc by slade87
well, download a new rom and flash it!
i've tried everything you say here on my phone and nothing worked.
i can't flash it because i can't use my phone to activate the debugging stuff.
SEUS just won't update it, tried many timesand always the same thing.
I'm desperate and i can't do nothing.
Please someone help me cause i've ruined my phone.
lucascb said:
i've tried everything you say here on my phone and nothing worked.
i can't flash it because i can't use my phone to activate the debugging stuff.
SEUS just won't update it, tried many timesand always the same thing.
I'm desperate and i can't do nothing.
Please someone help me cause i've ruined my phone.
Click to expand...
Click to collapse
Why not
lucascb said:
i've tried everything you say here on my phone and nothing worked.
i can't flash it because i can't use my phone to activate the debugging stuff.
SEUS just won't update it, tried many timesand always the same thing.
I'm desperate and i can't do nothing.
Please someone help me cause i've ruined my phone.
Click to expand...
Click to collapse
Seus not need usb debug
kormatoes said:
Seus not need usb debug
Click to expand...
Click to collapse
x10flash tools does XD
Bricked?
Instead of creating a new thread, I'll just post this here.
I probably irreversibly bricked my phone last night. Used this script (http://forum.xda-developers.com/showthread.php?t=888250) to enable JIT, and that worked out fine. But When I tried to install App2SD, the terminal emulator displayed some “rm error” very briefly, before crashing, and all non-sony stock apps disappeared. Rebooting the phone, apps came back but root was broken, 3rd party apps run into errors, wifi cannot obtain IP addresses. After a user data wipe, cannot recognize SIM card
- Unfortunately, on a highly idiotic note, XRecovery was not working right before I attempted to install app2sd (I do have a backup).
- Sony Ericsson PC Companion cannot find software for the device, saying “no software available at this point”.
- SEUS says the phone already has the newest software version
- Flashtool says to check USB Debugging, Unknown application source, but they already are enabled.
- Flashtool (when trying to install busybox) and SuperOneClick 1.9.5 encounter the error: -exec ‘/system/bin/sh’ failed: Permission denied(13)-
Is there some way to install xrecovery through a computer? The SE backup and restore app is still there, but I don’t have a SE backup. Any other ideas, or am I totally screwed?
Thanks in advance.
Eric
lucascb said:
x10flash tools does XD
Click to expand...
Click to collapse
do it with seus then bit more work btw why cant you choose it then
try to check your battery....
jingz1010 said:
Instead of creating a new thread, I'll just post this here.
I probably irreversibly bricked my phone last night. Used this script (http://forum.xda-developers.com/showthread.php?t=888250) to enable JIT, and that worked out fine. But When I tried to install App2SD, the terminal emulator displayed some “rm error” very briefly, before crashing, and all non-sony stock apps disappeared. Rebooting the phone, apps came back but root was broken, 3rd party apps run into errors, wifi cannot obtain IP addresses. After a user data wipe, cannot recognize SIM card
- Unfortunately, on a highly idiotic note, XRecovery was not working right before I attempted to install app2sd (I do have a backup).
- Sony Ericsson PC Companion cannot find software for the device, saying “no software available at this point”.
- SEUS says the phone already has the newest software version
- Flashtool says to check USB Debugging, Unknown application source, but they already are enabled.
- Flashtool (when trying to install busybox) and SuperOneClick 1.9.5 encounter the error: -exec ‘/system/bin/sh’ failed: Permission denied(13)-
Is there some way to install xrecovery through a computer? The SE backup and restore app is still there, but I don’t have a SE backup. Any other ideas, or am I totally screwed?
Thanks in advance.
Eric
Click to expand...
Click to collapse
SOLVED! Using davinci teams services.
@lucascb: if you don't mind parting with $14, give them a try. Good luck!
Hi everyone this is my first post. I have serious trouble. I bought a X10i few days back it was slow, I upgraded it using PCC. I was working fine but than i give it to my bro, it again slowed down and used to stuck so he restored it but dont know what happened it didnt complete. Now when i push the power button it vibrates and green light blinks but no response the screen remains black . I have no idea wat firmware it have and wat baseband it have. I used the flash tool 0.3.0, 0.2.9, 0.2.8 when i flash the firmware 2.1.A.045 global GGL, 3.0.1G.0.75 global ggl, 2.3_aro it goes into flash mode but at one stage or another it gives an error messsage "ABORT FLASHING" and somthing about turning on the debugging mode. I also used PCC and SEUS but it aborts in during installation, I than tried flash tool 0.2.5 and it flashed the X10i and give me message of flashing complete i did it with the firmware mentioned above but again. When i turn on the phone it just vibrates and green light blinks and nothing else even for two hours .
SO PLEASE I NEED HELP WHAT SHOULD I DO. NO SE Costumer Services here
civic_minded said:
Hi everyone this is my first post. I have serious trouble. I bought a X10i few days back it was slow, I upgraded it using PCC. I was working fine but than i give it to my bro, it again slowed down and used to stuck so he restored it but dont know what happened it didnt complete. Now when i push the power button it vibrates and green light blinks but no response the screen remains black . I have no idea wat firmware it have and wat baseband it have. I used the flash tool 0.3.0, 0.2.9, 0.2.8 when i flash the firmware 2.1.A.045 global GGL, 3.0.1G.0.75 global ggl, 2.3_aro it goes into flash mode but at one stage or another it gives an error messsage "ABORT FLASHING" and somthing about turning on the debugging mode. I also used PCC and SEUS but it aborts in during installation, I than tried flash tool 0.2.5 and it flashed the X10i and give me message of flashing complete i did it with the firmware mentioned above but again. When i turn on the phone it just vibrates and green light blinks and nothing else even for two hours .
SO PLEASE I NEED HELP WHAT SHOULD I DO. NO SE Costumer Services here
Click to expand...
Click to collapse
Could be a hardware LCD problem.
If it was lcd problem it must have sound and alerts but nothing
Try this: http://forum.xda-developers.com/showpost.php?p=17404856&postcount=4
thanks i will try any download links for the stock firmware
civic_minded said:
thanks i will try any download links for the stock firmware
Click to expand...
Click to collapse
Check the firmware or flash tool thread here or in the development forum.
I tried that too same result . What kind of forum is this no gurus or experts here who can give an expert advice or suggestion. Too much disappionted
only another "amateur" suggestion i'm afraid.
1) pull out battery (leave for 30 secs)
2) replace battery/DO NOT turn on
3) download a fresh install of SEUS.
4) run SEUS and follow instructions, complete as instructed.
5a) turn on phone, if fixed - yipee,
5b) if not - plug into usb and see if device shows in "computer"
6) (if 5b=yes) you know the phone is at least "contactable". good place to start for further troubleshooting.
7) post your results and be patient my friend, xda (x10) is currently up to its knees in new toys (unlocked bootloader) so people might take a moment to answer you.
hit thanks if i helped, seems my count is low no idea why, i think i'm helpful
Again I installed the fresh SEUS and did as instructed and no luck same result. It completely downloads the firmware but when it comes to installing the firmware its aborts. When i connect X10i to the pc it detects it as "SMEC Flash device" in device manager.
Further instruction needed
HELP!!!!!!!!!!!!!!!!!!!!
their is no firmware for so which fw should i use for flash and i dont know if the set came from other country so which fw should flash it with
If you plug in to your pc and open flashtool what does it (flashtool) say??
Sent from my X10i using XDA App
civic_minded said:
I am living in Pakistan and their is no firmware for so which fw should i use for flash and i dont know if the set came from other country so which fw should flash it with
Click to expand...
Click to collapse
Global generic
sounds silly, but charge the phone and make sure its not just really flat?
civic_minded said:
I am living in Pakistan and their is no firmware for so which fw should i use for flash and i dont know if the set came from other country so which fw should flash it with
Click to expand...
Click to collapse
I am no "Amateur or Noob", I gave you the reflashing options, as I said, if no reflashing option available here doesn't work, then it's probably a hardware issue or you're simply doing something wrong.
"[email protected] "
When i plug it into PC and flash tool is on, flash tool recognizes it and the phone can go into flash mode as well but if i go for root option than it say to connect the phone in usb and turn off the debugging
civic_minded said:
"[email protected] "
When i plug it into PC and flash tool is on, flash tool recognizes it and the phone can go into flash mode as well but if i go for root option than it say to connect the phone in usb and turn off the debugging
Click to expand...
Click to collapse
Debug mode has to be turned on in application settings in order for flash tool to be able to root the phone. Therefore all settings except flash option will be disabled.
+1, if flashing did not work then I'm afraid its out of my league! Good luck anyway, and remember, u catch more bees with honey.
Sent from my X10 using XDA App
[email protected] said:
+1, if flashing did not work then I'm afraid its out of my league! Good luck anyway, and remember, u catch more bees with honey.
Sent from my X10 using XDA App
Click to expand...
Click to collapse
thanks for the advice and i dont know why you guys are getting so much sentimental on what i said
So I am new here. Sorry if I am a noob or something. But I rooted my phone, installed busybox, installed xrecovery, which won't start . Tried all 0.1 ,0.2 , 0.3 versions, none works. so I thought I could do it manually. Copied lib and bin files, but didn't find the build file. So I did only this. And then installed a app which needed rebooting, and it stuck. Sometimes it doesn't start at all and sometimes it reboot on itself. Tried the PC companion help, but it can't even connect . Do I still have hope? What can I try? Can you give me a step by step guide, since I am noob
DId you try Flashtool? Download v0.2.9 from here (http://forum.xda-developers.com/showthread.php?t=826455) and then install the correct firmware, which I can find for you if you tell me if it's mini pro or only mini
I think I flashed it. I have mini, not pro. Sorry didn't say it at first.
P.S. GO pocket legends
Did you get it working?
Sent from my MZ605 using XDA App
well, no it wont start. when I try to turn it on, it flashes like the battery is empty, but it wont charge . Can I somehow reinstall it?
exitas said:
well, no it wont start. when I try to turn it on, it flashes like the battery is empty, but it wont charge . Can I somehow reinstall it?
Click to expand...
Click to collapse
It should "always" be reflashable with SEUS. Sony Ericsson Update Service.
Thanks to both of you. SEUS worked now the phone is OK.
glad you made it works
You must try AIO
So I did something, turned off my phone, and now when I turn it on, it will show the Sony Ericsson screen then half a second of the AT&T screen then it will shut off and restart everything and it does this over and over and over until I take out the battery. I have a x10a running on 2.1 update and I have no idea what to do.
Sony Ericsson companion wont do anything to help me out by doing the "hold back button and plug in".... it says "update not available". Also my phone won't let me hard reset I really don't know what to do so can you please tell me something to do? I've been trying to fix it since about 3:00pm yesterday and its about to drive me crazy!! So please write back, Thanks!
Do You have root, xRecovery etc.? You could try to flash new ROM using flashtool (USB Debugging must be enabled)
jakuburban said:
Do You have root, xRecovery etc.? You could try to flash new ROM using flashtool (USB Debugging must be enabled)
Click to expand...
Click to collapse
Well i got it to work again by flashing it but now when i plug it in to use on the flash tool, it says "device detected" I had the old tool now i have the new one and it use to say x10 on old one now it says device detected on the new one... I tried installing drives and everything and it still says the same thing.. I want to do xrecovery and install apk files but it wont let me. Any suggestions?
So do You have working ROM now? If so copy the files from xRecovery.apk manually to the destination folders
drake.whitten said:
Well i got it to work again by flashing it but now when i plug it in to use on the flash tool, it says "device detected" I had the old tool now i have the new one and it use to say x10 on old one now it says device detected on the new one... I tried installing drives and everything and it still says the same thing.. I want to do xrecovery and install apk files but it wont let me. Any suggestions?
Click to expand...
Click to collapse
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
Its "soft-brick" state.
Didnt you have some problems with usb before?
If not, try to charge up your phone once again.
Then read this topic, It will surely help you:
http://forum.xda-developers.com/showthread.php?t=1034997
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Make the phone root 1st.
Try read here http://forum.xda-developers.com/showthread.php?t=928343
Then u can flash other ROM u like to your device.
Sorry, i am also newbie. but i read a lot thread and follow senior guide ^_^
dello2002 said:
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Click to expand...
Click to collapse
Even if phone shows up error triangle you should be able to use standart flash mode.
About fastboot dont know, never used it.
hi,
Thanks both for your help, in the end i downloaded the lastest version of flash tool and its got a option of disable verification and worked spot on.
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
dello2002 said:
hi,
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
Click to expand...
Click to collapse
No problem, it could be done, but not so simply. I did rooting and xrecovery installation without Flashtool many times since Flashtool werent possible torun on Linux
Root could be done with exploit zergRush; but try SuperOneClick first. It will take some time root it completely manual.
Same with xrecovery, but its much more simple, pasting three or four files to root FS.
Try superoneclick first, if it wont help, will provide more step by step information.
EDIT:
Simpliest solution - almost forgotten
Download the zip provided underthis post.
Extract the zip file.
Connect your phone to computer (remember, that USB debugging must be on!!!)
Run file runme.bat (command line window will appear).
Enjoy !
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
RELAX first.
You will have to flash the stock SE firmware is by using the X10 Flashtool i .e. get your phone to stock and then root it again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
I used this firmware :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Happy Flashing !
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
dello2002 said:
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
Click to expand...
Click to collapse
do you have USB debugging and unknown sources turned on your phone? Because its really strange why adb cant connect.
What ROM and kernel you are currently running on?
@dello what does ur pc say when u type adb devices?
Sent from my X10S using XDA
hi,
running the official rom and kernal that the SEUS installed running 2.3.3
and yes debugging mode and allow are both on but still says cannot connect to deamon, could it be the boot loader? i put ICS on a xperia play and did that fine, do i need to unlock the bootloader like i did with the play?
i did try to but the se website wont unlock it
and ADB in dos wont pick it up list empty
cheers