Related
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
soldiers33 said:
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
Click to expand...
Click to collapse
Repair using SEUS.
it wont work. just says I already have latest software
Even if you have "the lastest software installed" you can reinstall it.
soldiers33 said:
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
Click to expand...
Click to collapse
The new flash tool 0.2.5, will flash both 1.6 and 2.1. It works a little different, you will need to read through 1st.
ive tried the new flash tool and the old. neither work. The old one flashes but same problem but new one wont even let me select the firmware to flash so i cant even try it out properly. and sues just lets me exit it doesnt let me repair like usual
soldiers33 said:
ive tried the new flash tool and the old. neither work. The old one flashes but same problem but new one wont even let me select the firmware to flash so i cant even try it out properly. and sues just lets me exit it doesnt let me repair like usual
Click to expand...
Click to collapse
1. Try PC companion.
2. Read this guide.
You need to create the ftf file from the sin files, under advanced see bundle creation.
Read the how to.
pc companion wont work as I need to have usb storage but my phone wont even turn on. I have created the ftf files and now flashing, hopefuly it works.
still the same . could it be that the cable got disconnected half way through the process? sorry i forgot to mention this. My brother pulled it out. am i doomed?
soldiers33 said:
still the same . could it be that the cable got disconnected half way through the process? sorry i forgot to mention this. My brother pulled it out. am i doomed?
Click to expand...
Click to collapse
No you are not doomed. Calm down
1. Repair using SEUS (even if it says you have the latest software, reinstall it)
2. If that does not work, try PC companion.
3. If that does not work then use the flash tool. You can use the old version if the new one is not working out for you.
Before you do all of the above, take out the battery and wait 10 seconds. Then, reinstall the battery and try the SEUS. Good luck!
the thing is sues wont letme repair it just says exit. Normally you can repair but now it just says exit.
soldiers33 said:
the thing is sues wont letme repair it just says exit. Normally you can repair but now it just says exit.
Click to expand...
Click to collapse
OK. Then try the older version of the flash tool. You can find it here.
Does it also say install? If so, press that button. If that doesn't work install PC Companion and try that method.
thank you very much everyone for the help. Its finally working. I used the flash unbrick and its fixed im so happy i thought that my money went down the drain.
soldiers33 said:
thank you very much everyone for the help. Its finally working. I used the flash unbrick and its fixed im so happy i thought that my money went down the drain.
Click to expand...
Click to collapse
Glad it's sorted out. Take deep breaths now and enjoy your phone!
first of all let me say that i've don a lot of searching before posting this, and i know it seems pretty long but please try to help me.
i got an x10i from a friend few days a go. the reason i got it (for free) was because it's not working and he didnt want to mess with it anymore.
when i first got it, if i tried to turn it on, the led would flash red. once in a while it got turned on, the sony ericsson text appeared for a few seconds and went off again. now if i try to turn it on the led would flash green for a sec, there is a vibrate but thats it. screen wont turn on at all.
i'f i try to connect it in the SE PC suite it detects it, but fails installing it. i've managed to enter the repair tool, but it failed a few times. however, the last time i tried to repair it said that it was repaired succesfully. still, not turning on.
tried to flash a firmware via flashtool, seems like its going well all the way but in the end it says "error flashing. aborted".
i'm pretty much out of ideas now, so ill really be grateful if anyone could help me.
a little update:
i've manged to flash a firmware via flashtool and it finished without any error, but still it won't turn. only the quick green flash and vibration.
any help will be appreciated.
ok, big update:
the phone is starting, i get past the boot animation and see the main screen (!) but after a sec or 2 the screen freezes and the phone shut down and won't start again unless i replace the battery?
please? anyone? im feeling so close yet so far away. could be a battery issue? when the screen starts i see that the battery is almost empty (connecting it to the charger won't help)
Yesterday i had the same problem ... i had to flash the hole firmware with X10Flash-2.1 and then updating with seus.. after this it restarts and it boot correctly
Not sure if u tried this, try having the phone plugged into the charger and let it charge for a while and then try booting it up again. Firmware wise, I would try a stable 2.1 or the freex10 beta 2.2 for a start to ensure that the software installed are stable ones. Hope this help.
try to fix it with seus...
nothing else willing to work as it seems there is something wrong a little deeper than flashable files...
This is I believe 1000th thread about this.
1. run seus
2. run PCC
3. run flashtool
Done.
SEUS seems to be the most effective way of repairing this.. Although you might also want to try pulling the battery before it freezes, it can help to recalibrate the battery.
Sent from my X10 using XDA and Swype.
thanks to everyone who replied.
i've downloaded and installed on the phone the version by SEUS, but i still cant turn on the phone.
in PC companion nothing is happening. when i go to the support section to get the new version, it just connecting with the phone and then tells to disconnect the phone and turn it on (which of course don't happen).
i've tried to run a repair in PC suite but it fails.
i've also tried to flash a firmware in flashtool, but it also fails.
any ideas?
Davinciteam.com .they sell you the original 1.6
Sent from my X10i using XDA Premium App
simoking said:
Davinciteam.com .they sell you the original 1.6
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
and how the 1.6 will help me?
and another thing: i'm using the versions under x10i generic here:
http://forum.xda-developers.com/showthread.php?t=920746
with the first and the third ones i get an error, but with the second i don't. however the device still won't turn on.
is there any chance that because i'm using win 7 64 bit it causes problems?
please?...
Ace_co said:
is there any chance that because i'm using win 7 64 bit it causes problems?
Click to expand...
Click to collapse
If i am not wrong windows 32/64 bit does not affect how ur phone is gonna be installed since the installer that is downloaded is for the phone only and the installation process will only be done by the phone itself.
Not sure if u tried a different software such as xrecovery to install the OS into ur x10, since xrecovery with freex10beta4 works for almost all of the users in here, it should work for u if ur x10 has no hardware faults. If all still fails, it might be most probably your x10 hardware has failed or something along those lines.
It work for me, then with the 1.6 you can after that update with seus to 2.1update 1. If your phone doesn't work anymore you have nothing to lose.
Sent from my X10i using XDA Premium App
the original 1.6 is on this forum also... please make some commercials somewhere else... k thanks...
4 out of the 9 posts u made had something to do with this website... could you stop please?
@the win7 part... you could get problems if you dont got the right drivers but it would tell you or error out...
the only thing what you could do in my opinion that is is short the pins while battery has been removed
this should effect total emptied phone and hopefully also the memory.... maybe than you are capable to flash/start it...
now if this wont work.. im sorry but im out of ideas and u shud use it to make a new barn or house ;/ im sorry
Didn't know the 1.6 was on the forum, thanks for the cue. I won't talk about that anymore.
Sent from my X10i using XDA Premium App
@ACE_co : I got the same problem. Can't use any SEUS, SE PC because it always fails when repairing. I even tried XIOFUB.rar to unbrick it to back to 1.6. It runs well and finish but with the info message within those commands
INFO: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLASS" ;ERR_STATIC="UNVALID_COMMAND";ERR_DYNAMIC="";
my xperia has the same problem, when I try to turn it on, a green light flashs, vibrate but it does not turn on I tried SEUS and PCC to repair but did not work, when I try flasher programs I see the
INFO: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLAS S" ;ERR_STATIC="UNVALID_COMMAND";
İf you found a solution maybe you can help me
Hello all,
I was using this rom: http://forum.xda-developers.com/showthread.php?t=1002836
for a few weeks and all was working fine until today. All just worked fine until some moment that all stoped to work. Now i dont have any service anymore and when i try to reboot it and it starts again i get:
-No widgets load
-"Process system is not responding" Force close or wait.
-Cant boot into xRecovery
-Flashtool wont recognize the phone
-phone keeps making notification sounds for no reason
-i get no service
-cant connect to wifi
-wont recognize SD card
-randomly freezes
I found on this forum that this problem causes because i install a new busybox thats what created this error. But i cant get back in to xrecovery again or back to my SD card since my pc doeosnt connect to my phone. So also SEUS doesnt connect, what can i do to reset it all or atleast to get back into xrecovery?
Yours,
anyone have any solutions? i'm in the same exact boat.
Try reinstalling xrecovery from flashtool. You should be able to even with force closes.
Sent from my X10i using XDA App
Go to Application -> Dev Tools -> Bad Behavior -> Crash the system server then reboot. Give it a few minutes to settle then if that doesn't work, download xrec v0.3 from below. If xrec installs then wipe cache & clear Dalvik cache. If none of those work you have no choice but to reflash.
http://www.mediafire.com/?eyihuzn4h96xw4c
Hi I had this exact same problem so I reflashed but now I can't get rooted. Can anybody help me root?
06bgoggin said:
Hi I had this exact same problem so I reflashed but now I can't get rooted. Can anybody help me root?
Click to expand...
Click to collapse
How exactly are you trying to root? Have you tried the flashtool, z4root or super one click?
Sent from my X10i using XDA App
Lockon Stratos said:
How exactly are you trying to root? Have you tried the flashtool, z4root or super one click?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I've tried all of them. Flashtool has always worked for me in the past but all I can do on it at the moment is flash the stock firmware it won't let me click the root option.
Z4root would go through everything but then when I donloaded busybox it said I wasn't rooted.
And with super one click it would spend for ever trying to find the device, never find it then the programme would freeze.
Do you have any other ideas?
06bgoggin said:
I've tried all of them. Flashtool has always worked for me in the past but all I can do on it at the moment is flash the stock firmware it won't let me click the root option.
Z4root would go through everything but then when I donloaded busybox it said I wasn't rooted.
And with super one click it would spend for ever trying to find the device, never find it then the programme would freeze.
Do you have any other ideas?
Click to expand...
Click to collapse
Z4root & Superclick are my backup procedure in case I'm not infront of a pc and I always use the flashtool to root.
Are you sure usb debugging is enabled? I know I've made that mistake before then realized that it wasn't enabled. Stock 2.1 does not enabled this function by default as far as I know.
Sent from my X10i using XDA App
Lockon Stratos said:
Z4root & Superclick are my backup procedure in case I'm not infront of a pc and I always use the flashtool to root.
Are you sure usb debugging is enabled? I know I've made that mistake before then realized that it wasn't enabled. Stock 2.1 does not enabled this function by default as far as I know.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Yeah I made sure I wasn't making that mistake I've tried turning usb debugging on the plugging in my phone, plugging in the phone then turning on usb debugging, I have no idea whats going on. It has really confused me :/
06bgoggin said:
Yeah I made sure I wasn't making that mistake I've tried turning usb debugging on the plugging in my phone, plugging in the phone then turning on usb debugging, I have no idea whats going on. It has really confused me :/
Click to expand...
Click to collapse
BTW what firmware are you using? If you are still on the branded firmware that might be the reason why so flash a generic 2.1 firmware then try rooting again. Here's an example:
http://forum.xda-developers.com/showthread.php?p=15711725#post15711725
If you look at the last few posts Uberlight25 was using branded firmware and had the same problem as yours. After flashing generic 2.1, he/she was able to root again.
Good luck.
Lockon Stratos said:
BTW what firmware are you using? If you are still on the branded firmware that might be the reason why so flash a generic 2.1 firmware then try rooting again. Here's an example:
http://forum.xda-developers.com/showthread.php?p=15711725#post15711725
If you look at the last few posts Uberlight25 was using branded firmware and had the same problem as yours. After flashing generic 2.1, he/she was able to root again.
Good luck.
Click to expand...
Click to collapse
Thanks but I worked out that the problem was that I didn't have the debug driver installed, I fixed this by reinstalling PC Companion
Cannot flash x10, driver missing
Metalbuster said:
Hello all,
I was using this rom: http://forum.xda-developers.com/showthread.php?t=1002836
for a few weeks and all was working fine until today. All just worked fine until some moment that all stoped to work. Now i dont have any service anymore and when i try to reboot it and it starts again i get:
-No widgets load
-"Process system is not responding" Force close or wait.
-Cant boot into xRecovery
-Flashtool wont recognize the phone
-phone keeps making notification sounds for no reason
-i get no service
-cant connect to wifi
-wont recognize SD card
-randomly freezes
I found on this forum that this problem causes because i install a new busybox thats what created this error. But i cant get back in to xrecovery again or back to my SD card since my pc doeosnt connect to my phone. So also SEUS doesnt connect, what can i do to reset it all or atleast to get back into xrecovery?
Yours,
Click to expand...
Click to collapse
I have the exact same problem. Did you solve it?
I device maneger SEMC USB Flash show up with a yellow warning sign that indicate that drivers are missing. I have tried to install SE companion but that did not help. Also I cannot flash to a stock rom via SEUS.
Someone suggested to install xrecovery again ... but how?
/anders76
I just flashed my x10 mini using flash tool (upgrade to 2.1), i followed the instruction until it say finished and unplug the usb conection.
But after i pushed turn on button, the LCD only shows light (about 5 second) and then off, and countinue on and off (no SE text / logo).
I have tried some solution with SEUS and PC Companion, even try to reflash, but none of them sucsesfull.
Any solution, thanks...
Sent from my GT-P1000 using XDA App
You could see if anything in this post helps you
http://forum.xda-developers.com/showpost.php?p=14814786&postcount=11
What ? A red or green led if its red your phone is flat ! But it couldn't be that
sent from this midget x10 mini pro using cm7.2.3.3 14.5
I think you can re-flash the phone... it could be the solution.
kormatoes said:
What ? A red or green led if its red your phone is flat ! But it couldn't be that
Click to expand...
Click to collapse
I mean the LCD, it only become bright-gray light (right before SE text appear), but stuck there about 5 second, then off, and on again, continuously.
thekindladies said:
You could see if anything in this post helps you
http://forum.xda-developers.com/showpost.php?p=14814786&postcount=11
Click to expand...
Click to collapse
I will try this, but FYI
I still can flash my phone, it detected in my PC while I press back button and plug the USB, and the flash successful and told to unplug the USB, but again when push the power I still got the some problem. I have tried this for 3-4 times.
Using SEUS, it still can detected my phone, and search for update, but told something like my phone have the last updated.
Is the SE text / logo appear while we charge it on power off? (coz while I charge it, the LCD only got bright-gray light)
I just brought this phone few days ago from my friend, haven't charge it while power off.
Pc companion and seus are not the same thing just start again with seus
zorro83 said:
I mean the LCD, it only become bright-gray light (right before SE text appear), but stuck there about 5 second, then off, and on again, continuously.
I will try this, but FYI
I still can flash my phone, it detected in my PC while I press back button and plug the USB, and the flash successful and told to unplug the USB, but again when push the power I still got the some problem. I have tried this for 3-4 times.
Using SEUS, it still can detected my phone, and search for update, but told something like my phone have the last updated.
Is the SE text / logo appear while we charge it on power off? (coz while I charge it, the LCD only got bright-gray light)
I just brought this phone few days ago from my friend, haven't charge it while power off.
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5 Oc by slade87
Download the latest version of SEUS,u said it detects the fone so that good, now when it says your up to date, there 'll be an option like update anyway....try this...
Problem solved.
Keep trying used SUES, more than 20 times, than tadaaa... it successful.
Thanks guys.
Really appreciated it...
Good stuff
zorro83 said:
Problem solved.
Keep trying used SUES, more than 20 times, than tadaaa... it successful.
Thanks guys.
Really appreciated it...
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5 Oc by slade87
well, download a new rom and flash it!
i've tried everything you say here on my phone and nothing worked.
i can't flash it because i can't use my phone to activate the debugging stuff.
SEUS just won't update it, tried many timesand always the same thing.
I'm desperate and i can't do nothing.
Please someone help me cause i've ruined my phone.
lucascb said:
i've tried everything you say here on my phone and nothing worked.
i can't flash it because i can't use my phone to activate the debugging stuff.
SEUS just won't update it, tried many timesand always the same thing.
I'm desperate and i can't do nothing.
Please someone help me cause i've ruined my phone.
Click to expand...
Click to collapse
Why not
lucascb said:
i've tried everything you say here on my phone and nothing worked.
i can't flash it because i can't use my phone to activate the debugging stuff.
SEUS just won't update it, tried many timesand always the same thing.
I'm desperate and i can't do nothing.
Please someone help me cause i've ruined my phone.
Click to expand...
Click to collapse
Seus not need usb debug
kormatoes said:
Seus not need usb debug
Click to expand...
Click to collapse
x10flash tools does XD
Bricked?
Instead of creating a new thread, I'll just post this here.
I probably irreversibly bricked my phone last night. Used this script (http://forum.xda-developers.com/showthread.php?t=888250) to enable JIT, and that worked out fine. But When I tried to install App2SD, the terminal emulator displayed some “rm error” very briefly, before crashing, and all non-sony stock apps disappeared. Rebooting the phone, apps came back but root was broken, 3rd party apps run into errors, wifi cannot obtain IP addresses. After a user data wipe, cannot recognize SIM card
- Unfortunately, on a highly idiotic note, XRecovery was not working right before I attempted to install app2sd (I do have a backup).
- Sony Ericsson PC Companion cannot find software for the device, saying “no software available at this point”.
- SEUS says the phone already has the newest software version
- Flashtool says to check USB Debugging, Unknown application source, but they already are enabled.
- Flashtool (when trying to install busybox) and SuperOneClick 1.9.5 encounter the error: -exec ‘/system/bin/sh’ failed: Permission denied(13)-
Is there some way to install xrecovery through a computer? The SE backup and restore app is still there, but I don’t have a SE backup. Any other ideas, or am I totally screwed?
Thanks in advance.
Eric
lucascb said:
x10flash tools does XD
Click to expand...
Click to collapse
do it with seus then bit more work btw why cant you choose it then
try to check your battery....
jingz1010 said:
Instead of creating a new thread, I'll just post this here.
I probably irreversibly bricked my phone last night. Used this script (http://forum.xda-developers.com/showthread.php?t=888250) to enable JIT, and that worked out fine. But When I tried to install App2SD, the terminal emulator displayed some “rm error” very briefly, before crashing, and all non-sony stock apps disappeared. Rebooting the phone, apps came back but root was broken, 3rd party apps run into errors, wifi cannot obtain IP addresses. After a user data wipe, cannot recognize SIM card
- Unfortunately, on a highly idiotic note, XRecovery was not working right before I attempted to install app2sd (I do have a backup).
- Sony Ericsson PC Companion cannot find software for the device, saying “no software available at this point”.
- SEUS says the phone already has the newest software version
- Flashtool says to check USB Debugging, Unknown application source, but they already are enabled.
- Flashtool (when trying to install busybox) and SuperOneClick 1.9.5 encounter the error: -exec ‘/system/bin/sh’ failed: Permission denied(13)-
Is there some way to install xrecovery through a computer? The SE backup and restore app is still there, but I don’t have a SE backup. Any other ideas, or am I totally screwed?
Thanks in advance.
Eric
Click to expand...
Click to collapse
SOLVED! Using davinci teams services.
@lucascb: if you don't mind parting with $14, give them a try. Good luck!
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help