Related
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Has anyone experienced this or am I the only one?
M5devil said:
Has anyone experienced this or am I the only one?
Click to expand...
Click to collapse
Sorry I have never heard of this or witnessed it while flashing anything to my device. Obviously the battery screen signifies that the phone is off but is in charging mode and hitting the power button will boot the device up. (I'm sure you already know of this). Never heard of it being stuck at that screen after flashing. Hopefully you can get this solved soon. Good luck
M5devil said:
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Click to expand...
Click to collapse
Slow down for a second. Your phone is definitely not bricked. Ive been over the edge, and been able to bring my phone back to life.
To clarify, you flashed vibrant6.zip through clockwork mod, and then the phone got stuck on the samsung S? How long did you let it sit there?
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
I flashed the stock ROM via Odin and then wanted to install Vibrant6.zip. For that I entered into a recovery mode via Clockwork and as someone in the other thread advised, I formatted system and also data, don't recall exactly. Then it looped to a standard recovery mode and I just rebooted the phone. This is where it got stuck... Vibrant in the center and Samsung at the bottom of the screen. To test it I left it like that from night till this morning. In the morning I woke up it was on the same boot screen.
Before that at night, after seeing it hand at the boot, I held both volume keys and power, waited for it to reboot, and immediately it showed a circular progress bar, but not moving just highlighted the 12 o'clock bar and second later I see the battery image all in gray and nothing else. It just sits on that grey static image without actually charging it (no green section or flashing dots)
Boot logo only appears if I am trying to reset without the USB cable. On the boot loop I plug in the cable and I hear the USB connecting it, I see the 2 Removable disks, but both inaccessible and adb commands don't recognize the device.
Very weird, as in turned off mode it's not charging at all.. just shows this grey battery image with a circle progress froze on 12 o'clock bar.
That's pretty much it.... I was never able to enter into recovery nor download via the buttons. It would just always reboot into this grey battery screen....
Completely helpless.... I did order a new battery from TMO, maybe the battery is fried and that's why it's not charging and just sits on this stupid static grey battery screen.
ArbitrageMan said:
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
Click to expand...
Click to collapse
Holding both volume keys and releasing power once screen goes blank, only show Vibrant logo again... I have tried this a million times
With USB cable it shows grey battery screen, without the cable just a Vibrant boot loop...
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
zephiK said:
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
Click to expand...
Click to collapse
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
M5devil said:
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
Click to expand...
Click to collapse
Are you sure that you're doing the right things to get to download? I've been in this situation and I wasn't able to get into recovery but I was able to get back into download mode.
I believe if you return it back and they find out it was rooted, they will charge you for it. If not, it'll appear on your bill.
I'm sure that you're doing the wrong things to get into download mode. If something is appearing on your screen it is a soft-brick and you're not bricked.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (powers on its own when plugged in)
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
Click to expand...
Click to collapse
A tip to get into download mode is to put the phone HORIZONTALLY (sideways) and it will make it a lot easier.
I am pretty much positive about it. I know a lot of people can easily enter into recovery or download modes, but I know many can't and I am one of them. It would just load the grey battery image instantly as I let go of the power button.
1. Take out battery, put it back in. (to turn the phone fully off) DONE
2. Don't turn it the phone on! DONE
3. Plug the phone into your PC, do not hit the power button! DONE
4. See if the phone shows anything on the screen (powers on its own when plugged in) FIRST THING THAT APPEARS IS A CIRCULAR PROGRESS BAR THAT CHANGES TO A GREY BATTERY IMAGE WITH A BAR IN THE MIDDLE OF IT. STATIC IMAGE, NOTHING ELSE.
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons. DONE
6. Hold the power button as well as the volume buttons until the screen goes black. DONE
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons! DONE
THE STUPID GREY COLOR BATTERY IMAGE APPEARS AS BEFORE....
I'm thinking maybe battery is fried and that's why the grey color screen appears and not the usual screen where you see the battery charging...
After reading this thread it's clear that my handset is one of the new ones that have recovery/download modes disabled via the volume+power buttons.
So that pretty much covers it... I hope TMO will not ***** about the files that are on the internal sd that I am unable to access and remove... unless anyone else has any fresh ideals how to gain access to the disk
I think I might have a similar problem.
I accidentally deleted the touchwiz framework so I can't do anything ON the phone. It boots up, and gets me to the lock screen. As soon as I unlock, I am greeted with dozens of unending force closes.
I can get into both download and recovery mode, however, I have not been able to get ADB to recognize the device. I am attempting to push the stock ROM to the internal memory to flash over everything.
I'm not sure what to do to get ADB to work but it's driving me nuts!
Stuck at vibrant? I have a fix
Check out android Dev Section... I figured out how to access download mode or stock recovery mode when you are stuck at the vibrant screen!!!! BACK IN BUSINESS VIBRANT OWNERS!!!
i got the same problem and nothing seems to work
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
eduardo_reflex said:
i got the same problem and nothing seems to work
Click to expand...
Click to collapse
... do i even have to say it?
droyd666 said:
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Click to expand...
Click to collapse
this problem is most likely solved. After 2 years!
mylostlonelysoul said:
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
Click to expand...
Click to collapse
Try asking another question. But I suggest using a USB jig. They usually work. Then odin
Sent from Mount Olympus via Hermes
Did you ever get it fixed man? I literally did the very same to mine a while back and It works like butter as we speak. It is fixable with a mini-usb jig or dongle. You can make your own with about $3 worth of parts from radio shack but I recommend buying one, it will be easier. I for the record made mine simply twisting together the resistors and though it was tough to touch the right pins it did eventually work and get me back into download mode.
Hopefully you already got it fixed though. If not I can help you out.
I'm trying to load the Unofficial 2.2 ROM onto my phone and I'm using the Odin method. I got into Download mode, got the pit and the ROM and put it all in place, the process starts but it just keeps getting stuck at "Do not turn off the Target." Now if I restart it, it won't even go into my phone.
Any suggestions why it keeps stopping at that point?
Q and A section
ferhanmm said:
I'm trying to load the Unofficial 2.2 ROM onto my phone and I'm using the Odin method. I got into Download mode, got the pit and the ROM and put it all in place, the process starts but it just keeps getting stuck at "Do not turn off the Target." Now if I restart it, it won't even go into my phone.
Any suggestions why it keeps stopping at that point?
Click to expand...
Click to collapse
My advice is to repost this question in the Q and A section and then edit your OP, to indicate you've done as much... Add a link in THIS OP to your Q and A thread. You should get some help after that i'm sure.
does you phone just sit at a black screen? mine did the same thing black screen to where i doesnt look like its on but if you turn the lights off in the room your in you will see the screen is actually lit! no idea on how to fix this myself... on mine if you press and hold the vol up, vol down, and power buttons for a while, (until your fingers hurt) you will eventually see a black screen with red writing with some stuff i was unable to understand! but thats all i could get out of the phone... called t-mobile and they sent a replacement... but i would like to know what i did wrong because i will be flashing froyo alot and i dont want to run into this problem again... btw can get odin to recognize the phone at all!
If your phone is not Hardkey locked.
1) Remove battery from phone and put it back in again
2) Plug your USB into your computer (and make sure it is not in your phone yet)
3) Push and hold down your two volume keys (DO NOT HOLD DOWN THE POWER BUTTON)
4) Plug in the USB cable into your phone
This takes me into Download every time. I did what you did. I had problem with Odin my phone and it just got stuck. I unplugged the phone and rebooted it. Or I should say I tried. It was dead to the world. Black screen. Power button did not start etc. Ran into a note from Kazer and he suggested the above procedure and it worked every time for me. Holding down the power button did not work for me.
Try it out and let me know if it worked.
So I was trying to get one of the simply honey roms onto my phone and long story short I accidentally formatted the internal storage of my phone with my computer therefore deleting ALL the files and folders of the android operating system! When I plug my phone into my computer i see the charging battery but non of the button combinations will allow me to get into download mode to flash it back to normal with odin. Just seeing if my phone is a lost cause or if there is a way to get the phone into download mode.
Take out battery, plug back into computer, plug back into phone, hold volume up and volume down at same time, place battery back into phone, make sure odin is up and waiting, try until it works.
Sent from my GT-I9000 using XDA App
tried that as well and no luck. just keeps going to the battery charging screen. When i try and turn my phone on normally it just shows Samsung Galaxy S i9000 not Vibrant and just sits there till it dies. could that be the problem?
did you try the steps while holding down just the volume down & the power button?
Just tried that same thing. Is download mode something that any android phone should go to no matter what or do the system files for th phone have to be there?
Should...how about recovery..can you get there??
unplug usb cable ..power off the phone.. hold all three buttons down...Vibrant screen will pop up & go off...then it will pop up again..release only the power button..keep both volume keys down and it should go into recovery.
you might be able to factory reset from there.
ok, got it to go into downloading mode. forgot that my phone thinks its an i9000, the volume up and down buttons are reversed! thanks so much for the help though!
Hi All,
So, I tried to flash Cyanogen mod last night using the instructions here: http://wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide. I was coming from a BIONIX ROM that flashed fine.
Anyways, the phone went into a reboot loop in the recovery screen and I foolishly just held the power button until it stopped. When I turned it back on it was broken. That is, now all it does is display the white Vibrant logo in the middle of the screen with the smaller Samsung logo below it. If I hold the power button for about 8 seconds the screen goes black for about 2 seconds and then comes right back up to where it was. I can't seem to even turn the phone off any more. It just stays on that screen permanently unless I hold the power button, in which case the screen is off for 2 out of every 10 seconds. Yanking the battery of course turns it off, but putting it back in immediately returns it to the state I've described.
I've scoured these forums and tried every button press + battery state + cable state + SD card/SIM state combo suggested, but the phone won't go to download or recovery mode. I found one thread describing the exact same problem. The OP said he'd try a jig and then disappeared without any further updates. I'm going to try to get my friend to make a jig using one of these sets of instructions
http://forum.xda-developers.com/showthread.php?t=819551
http://factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
but until then my questions is: does anyone have any experience with this problem (can't even turn the phone off)? If so, do you have any recommendations? Did a Jig work?
keep trying to get to download mode, pull battery, plug usb in to computer and to the phone, while holding both volume up and volume down pop in the battery. People have tried hundreds of times with it not working and then all of a sudden *bam* download mode.
So... my friend made me a jig and it works in that I can see the shoveling droid indicating download mode. However Heimdall/Odin won't recognize my phone. Heimdall's zadig utility won't locate the phone either, even with the cable plugged in. I'm, once again, stumped.
Just an update; I've tried Odin on three different computers, two Windows 7 (64 bit) and a Mac (with Heimdall). None of them seem to recognize the phone. Device manager on the Windows 7 machine does not update when I plug the phone in (in Download mode via the jig or not) and I can't find anything about Samsung in it anywhere. However I have installed the Samsung drivers; a few different sets I've found around the forums. I've also tried a couple utilities like the Vibrant toolbox and one click unbrick. Nothing seems to have any effect. I was so hopeful when the jig worked and got me to download mode, but now it's seeming I'm actually bricked. Has anyone seen a phone that could get to download mode but still be bricked? Oh, and I checked the cable using a friend's phone; her Mac recognized her phone using the cable. Haven't tried her phone on my Window's machines though.
Once again, any help is more than appreciated.
Have you tried to see if adb is working? If it does then try adb reboot recovery? If it works there is a file I can post for you later (is in my pc) that can restore your sbl.bin and fix your download mode problems.
Thanks for your help everyone, the problem was apparently resolved by a new cable; which is strange because the old one works for data transfers... just not for flashing apaprently. :S
Sometimes my I5500 won't turn on.
This has already happened 2 times (with two different firmwares I5500XWJPL and I5503TTLPJP9). The phone shows absolutely no signs of life - screen is black, no sounds, nothing.
I tried everything: pressing VolumeDown+Center+Power, VolumeDown+Home+Power, with or without battery/SIM/charger/SD. Tried removing battery for 30 minutes, charging battery in external charger.
Sometimes when charger is connected, it shows green battery on the screen, but still won't boot.
Last times I spent several hours fiddling with it until it finally turned on..
Can someone tell my if there is a fast way to revive the phone next time this happens?
Maybe your arm11boot is damaged, but still partly working. You need replace that partition. I saw arm11boot partition image in one Russian FW. I can't remember actual name. You can try that, but caution. You might brick your phone compleatly!
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Rigardi said:
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Click to expand...
Click to collapse
Take your battery out, put it back in and turn your phone on, then it will boot up into recovery mode. I also have this problem from time to time, sometimes it boots into recovery, sometimes not and i have to remove/replace the battery.
I actually thought that this might be a useful feature for say - if you wanted to upgrade a friends phone to cyanogenmod in the pub, for example.
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Rigardi said:
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Click to expand...
Click to collapse
In that case then this also happened to me - While exploring the rom manager application after first ever flashing my phone i accidentally selected the wrong phone model from the 'flash clockworkmod recovery' option and my phone was gone forever. Perhaps your problem is similar.
(Luckily it was under warranty and they replaced it. The method worked so well in fact it happened 'accidentally' a second time i acquired a 3rd i5500 out of the box )
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Rigardi said:
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Click to expand...
Click to collapse
what about the Emergency DLoad Mode, which is not the Download Mode? Did you try it?
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
how do I access emergency d/l mode?
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
ops, sorry: I miss your previous message!!
Now I got it and read this last post.. let some time to think about it, I'll replay soon.. but, generally speaking, at this point there's not so much you can do..
If you can get it into Download or Recovery mode, then you should be fine.
Sent from my GT-I5500 using XDA App
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
download mode is Vol - / Central Button / Power..
Im aware of that. However, Vol- + Menu + Power is the only key combination that the phone will react upon.
Anyway. Brought it to a mobile phone shop on friday, called them on monday and according to them, the phone should be fixed by tomorrow, wednesday. Seems like ROM manager has done damage that cant be undone without knowing how to handle a JTAG device. But at least its not completely broken. Learning that will cost me 25 Euros, though.
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Rigardi said:
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Click to expand...
Click to collapse
... for only 25 €!!!
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }