its showing
TRICOLOR SCREEN
ONBL...............
SPL 1.28.0000
N ON THE TRICOLOR SCREEN
THIS MESG
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
AND IN THE WHITE BAND RE-FORMATTING OK!
PLZ HELP ME WHAT CAN I DO NOW PLZ PLZ HELP ME..............
10492 said:
its showing
TRICOLOR SCREEN
ONBL...............
SPL 1.28.0000
N ON THE TRICOLOR SCREEN
THIS MESG
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
AND IN THE WHITE BAND RE-FORMATTING OK!
PLZ HELP ME WHAT CAN I DO NOW PLZ PLZ HELP ME..............
Click to expand...
Click to collapse
Tricolor
ONBL 1.07.0000
spl 1.10.olip
Start formating and then ERROR ?????
pLEASE HELP ME
HLCMAD said:
Tricolor
ONBL 1.07.0000
spl 1.10.olip
Start formating and then ERROR ?????
pLEASE HELP ME
Click to expand...
Click to collapse
cntc me...9226491934
hey i cant able 2 contact u bcoz i was hvng one phone only.......n that is dead u hv hv an email id den u can help me yaar via email
this is my email address u can cantact me here its [email protected]
plz plz help me........
thanx in advance
10492 said:
hey i cant able 2 contact u bcoz i was hvng one phone only.......n that is dead u hv hv an email id den u can help me yaar via email
this is my email address u can cantact me here its [email protected]
plz plz help me........
thanx in advance
Click to expand...
Click to collapse
hey i cant able 2 contact u bcoz i was hvng one phone only.......n that is dead u hv hv an email id den u can help me yaar via email
this is my email address u can cantact me here its [email protected]
plz plz help me........
thanx in advance
sumeet922 said:
cntc me...9226491934
Click to expand...
Click to collapse
Please can you contact me by mail??
[email protected]
Thanks a lot.
gene is dead
my gene is not starting at all..
just the red light flashes when i press power button for long
charged the battery from outside so no problems there also..
What you were trying to do?
ex, flashin ROM , nlocking etc.
Related
help me plz after i instal the new windoes by using ppc kichen it stock befor i do align plz help me plz plz plz help
ramses77 said:
help me plz after i instal the new windoes by using ppc kichen it stock befor i do align plz help me plz plz plz help
Click to expand...
Click to collapse
when you first do a soft - reset... what do the red letters read at the bottom of the screen for R: and D: ?
my p3400 old gene is dead i dont know wht to do plz help me guys i need to unbrick it fast can any one help .. i tryed that mtty thing but all times error and tryed SD way and invalid cerificated wht to do plzzzzz
pls give details
hi
pls take ur time calm down and give full details
and why waste a thread for ur help why not PM some one or ask in one of the threads kindly don't was a thread
my advise pls read Krazys stiky do it word for word and u cant fail his tut is so good even a child can do it but and ur comp is not XP os u need to do some additional things(sorry i don't remember) on ur comp read the stiky it has all req tools and detail explanation save it on ur comp and read it u will succeed
and again give more details what is happening and wat is the errors only when u give such details can u get help chill man ur at the rite place ur problem will be solved
good luck
spysawy said:
my p3400 old gene is dead i dont know wht to do plz help me guys i need to unbrick it fast can any one help .. i tryed that mtty thing but all times error and tryed SD way and invalid cerificated wht to do plzzzzz
Click to expand...
Click to collapse
LOL sry for wasting thread
sry for wasting thread but i just dont know whr to post .. look i tryed to upgrade my phone but i didnt upgraded my SPL i forgot so it brick it and its old gene so i dont know wht to do i tryed mtty way but its always make errors
can u plz help me i cant live without my ppc lol
@spysawy: Please read the sticky as how to upgrade. I understand you should upgrade your HTC Gene (OLD) with Krazy's ROM v2R3
sry for that
can u plz send me a link coz i dont know whr to read it
how you kill youre gene ?
did u flash any rom ? before gene got dead if yes provide link of that rom or thread
plz answer me
can u say to me wht post to go or thread and give me link can u plz
its SPL not ROM Problem
ankit360 said:
how you kill youre gene ?
did u flash any rom ? before gene got dead if yes provide link of that rom or thread
Click to expand...
Click to collapse
lol i just forgot to use the olip spl so i bricked my phone thats the problem not the rom is the problem
man tell us which rom u use to flash
there is no solution to unbrick old gene
Shiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiit
ankit360 said:
man tell us which rom u use to flash
there is no solution to unbrick old gene
Click to expand...
Click to collapse
**** rly cant do anything wht to do then.. any way i was using wm5 stock rom btw plz try to get me any solution coz i need it
meet me on msn chat i m online till half hour i pm my id to u
ankit360 said:
meet me on msn chat i m online till half hour i pm my id to u
Click to expand...
Click to collapse
thats my mail add me coz i tryed to add u but u offline
thats my mail [email protected]
as far as I know, if you have flashed your Gene without uspl, you have to get it to service center. but before you do that, just download your original shipped ROM from xda ftp site and try sd card flashing.
next time be careful.
Addicted2xda said:
as far as I know, if you have flashed your Gene without uspl, you have to get it to service center. but before you do that, just download your original shipped ROM from xda ftp site and try sd card flashing.
next time be careful.
Click to expand...
Click to collapse
thnx but can u give me links
go to below link
hi
pls go to below link and do everything word for word save the details and the tools on ur comp and give details i think u have not done HSPL
do it , this link has a full explnation and clear guidance on how to do the HSPL
and give ur details as u see on my signature ie ur onbl,os and all otherdetails as given on my signature
good luck
give details like this these are my numbers wat is urs
SPL 1.10.Olip,ONBL 1.07.000,GSM 02.79.90,OS 1.17.0.0
http://forum.xda-developers.com/showthread.php?t=472169
svrhari said:
hi
pls go to below link and do everything word for word save the details and the tools on ur comp and give details i think u have not done HSPL
do it , this link has a full explnation and clear guidance on how to do the HSPL
and give ur details as u see on my signature ie ur onbl,os and all otherdetails as given on my signature
good luck
give details like this these are my numbers wat is urs
SPL 1.10.Olip,ONBL 1.07.000,GSM 02.79.90,OS 1.17.0.0
http://forum.xda-developers.com/showthread.php?t=472169
Click to expand...
Click to collapse
hey there is a problem that my ppc dont open at all and i cant do hard rest and i cant uplode any roms
SPL 1.17.000
ONBL 1.17.000
so wht to do plz help i need to unbrick it but its just OLD so i cant use
Orefkov and cant find that other thing JTAG Method by Orefkov
spysawy said:
hey there is a problem that my ppc dont open at all and i cant do hard rest and i cant uplode any roms
SPL 1.17.000
ONBL 1.17.000
so wht to do plz help i need to unbrick it but its just OLD so i cant use
Orefkov and cant find that other thing JTAG Method by Orefkov
Click to expand...
Click to collapse
just go to the stickey gene wiki where yu will find link for the wiki page. yoi will find there the jtag method and the link to roms.
Addicted2xda said:
just go to the stickey gene wiki where yu will find link for the wiki page. yoi will find there the jtag method and the link to roms.
Click to expand...
Click to collapse
hey
i found the method its just a picture but nothing written to know wht to do lol so can u say to me plz wht to do with that pic
Hey Guyz ..
i need help here ma phone is totally dead nuthing repond in it
i tried 2 setup an old WM5 source & after da installation finished ma ppc was dead & nuthing in it respond & it dont want 2 open
sooo if any1 can help i'll be pleased :X
i rlly need help so if there's any ideas
& btw i tried pressing the camera & power 2 log in the bot screen but i even cant do this ?
My Mistake....
u shdunt hav downgraded ur windows..i read smwhere downgrading rom can even make ur phone dead n in ur case i think is same..
so any1 knows how 2 fix it??????????????? i rlly need help
You can enter in bootloader? 3 color screen?
If not try the following:
Remove the battery from gene. Press the power button some times to discharge the residual energy. Now put back the battery and power on your device. The leds should blinks. Now hold the camera button and reset your Gene. This way I believe it will be in bootloader mode and you can flash another ROM.
saaaaaaaaaaaaaaaaaaaaaaaaaad
nothng happn just power lights in buttons on mine plzz help plz
try this
hi
try what ramersonw has mentioned in this post if u get the try color screen used usb cable and flash ROM also give more details how can people help u without any info
wakkasx said:
nothng happn just power lights in buttons on mine plzz help plz
Click to expand...
Click to collapse
OMG
I installed a rom to HTC P3400 now it give no respond for anything
surely i can help you....
call me @
sumeet922 said:
surely i can help you....
call me @ 9226491934
Click to expand...
Click to collapse
stop giving your private numbers,email ids publically.better is you PM the respective person.
If you have so much knowledge(no offense), better is you start a new thread and spread the info.
this would help all us gene members.
karan999 said:
stop giving your private numbers,email ids publically.better is you PM the respective person.
If you have so much knowledge(no offense), better is you start a new thread and spread the info.
this would help all us gene members.
Click to expand...
Click to collapse
my english is poor......
1st try J-TAG METHOD
IF TRI-COLOUR SCREEN COMES, UPLOAD 614 kb's NBH FILE ON CELL VIA ROM UPDATE UTILITY
THEN FLASH ANY COOKED ROM.
tested 100%
Dear All,
My HTC P3400i is dead, show 3 color screen and can't open it.
On that screen is show the text to;
ONBL 1.17.0000
SPL 1.07.Oref
(on red color)
So please give me for your idea to recover rom or uprom ASAP.
Thank you very much for your kind cooperation in this matter.
[email protected]@b said:
Dear All,
My HTC P3400i is dead, show 3 color screen and can't open it.
On that screen is show the text to;
ONBL 1.17.0000
SPL 1.07.Oref
(on red color)
So please give me for your idea to recover rom or uprom ASAP.
Thank you very much for your kind cooperation in this matter.
Click to expand...
Click to collapse
Read the Rom upgrading guide forum carefully.See my signature.the links are given.
3 colours
Yes its in Bootloader mode, Now you can flash ROM
I can't flash rom now, the program was show the error message
"ERROR 300"
i have same set, same condition
Please some one help us...
Thanks in advance..
Arif Jamil
hi
guys if u can see the tricolor
1.connect ur phone to ur pc using ur usb cable
2.see if u get the USB text
if so good just use the customer ruu and flash a rom
i used to have a gene i did this once when i got this problem it worked for me
hope it helps
goodluck
[email protected]@b said:
I can't flash rom now, the program was show the error message
"ERROR 300"
Click to expand...
Click to collapse
Arif Jamil said:
Please some one help us...
Thanks in advance..
Arif Jamil
Click to expand...
Click to collapse
@karan999
hi
this is not a nice answer ur being very bullish remember all the questions u asked to many here and they answered right its like that u give what u take
nothing wrong in helping this is just my advise thats all
i did not expect this frum u buddy i feel very very sad
karan999 said:
Read the Rom upgrading guide forum carefully.See my signature.the links are given.
Click to expand...
Click to collapse
haree said:
hi
this is not a nice answer ur being very bullish remember all the questions u asked to many here and they answered right its like that u give what u take
nothing wrong in helping this is just my advise thats all
i did not expect this frum u buddy i feel very very sad
Click to expand...
Click to collapse
im really sorry....bt din understand a word.
follow dis steps if u r getting error 300
1.get ur bootloader mode (tricolor screen)
2.connect ur device to pc u wil see usb below
3.kill active sync process named wcescommm through task manager
4.run rom update utility
it should work if u hv new gene!! all the best
r u sure that yours is new gene and u have done the oref after knowing that?what happen when u just soft reset or power on the device?only red and green light blink?if yes then u have definately brick your device.if no then try rom for both old and new gene for flash.may be this will help.
hi
dont give the wrong idea one should find out if their mobile is old or new and them flash the right ROM for their phone u cant ask him to flash both old and new gene ROM and try
this is not a trial and error pls if u dont have the solution its fine kindly don't give the wrong idea this is just my sugestion to u that's all
saurabh88 said:
r u sure that yours is new gene and u have done the oref after knowing that?what happen when u just soft reset or power on the device?only red and green light blink?if yes then u have definately brick your device.if no then try rom for both old and new gene for flash.may be this will help.
Click to expand...
Click to collapse
hey bro m getting that tri color screen but when m going to use rom update utility at last its telling error 200...
plzz get newer update tool.. how to get this ??
plzz solve it
Can you plesase upload screenshot?
Try to read manual again and follow all steps carefully
mr.harsh said:
Can you plesase upload screenshot?
Try to read manual again and follow all steps carefully
Click to expand...
Click to collapse
I first tried wid olip rom.. but it didnt work.. and then tried for olipro.. that i think was working ..
then i went for mtty and after that i used rom update utility.. after clicking 2 times on next button its showing error 200 get newer update tool....
what to do not getting anything..
when i press that camera + power button i get that tricolor screen
and written there
ONBL 1,17,0000
SPL 1.10.Olip
plzz help bro...
even m not sure that mine is old or new gene....
plzz help bro..
thankss in advance...