Hello, I'm using stock 2.1 ROM and tryed to overclock with x8oc.ko module, but what I get is just placebo. In SetCPU I can raise freq. above 800Mhz. I set 728mhz, but when run quadrant bechmark there is no increase in score, It's about 550. It doesn't matter what freq. I set I still get score like with stock speeds. Whats wrong? When flashed to slade87_MiniCM6 everything works just fine, I easily get 1000 in quadrant. Please help, I'm really want to have overclock in stock ROM, because I like it
So, any ideas? Why I can't speed up my x10mp with 2.1 android?
http://forum.xda-developers.com/attachment.php?attachmentid=634261&stc=1&d=1308833600
here 768mhz on slade87 2.2 rom
http://forum.xda-developers.com/attachment.php?attachmentid=634262&stc=1&d=1308833600
here 768mhz on stock 2.1 rom
Why there is no increse in quadrant? :/
Because stock 2.1 doesn't recognise all of the ko file's components
Thanks for at least one reply So, it's impossible to overclock on stock 2.1 or just need to add some files?
i didn't know if you did something wrong or not.. but i already test overclocking with my 2.1 stock rom.. and it's going fine with no error or something like u said.. i got 745 in quadrant.. i didn't think that the eclair 2.1 will get around 1000 because that is an eclair you know.. it's different from froyo..
of course the analogy is like this
eclair < froyo < gingerbread
CMIIW
It's only for 2.1.1.A.0.6 with xxx15 baseband. Check the requirements.
fyudha said:
i didn't know if you did something wrong or not.. but i already test overclocking with my 2.1 stock rom.. and it's going fine with no error or something like u said.. i got 745 in quadrant.. i didn't think that the eclair 2.1 will get around 1000 because that is an eclair you know.. it's different from froyo..
of course the analogy is like this
eclair < froyo < gingerbread
CMIIW
Click to expand...
Click to collapse
Well i have 2.1.1.A.0.6 with xxx15 baseband stock rom rooted and the overclock works
However if i have the cpu set at 600MHz i get like 295 on quadrant and if i change cpu set to 710MHz i get 480 something.
how on earth did you get 745 ?
doixanh said:
It's only for 2.1.1.A.0.6 with xxx15 baseband. Check the requirements.
Click to expand...
Click to collapse
Yes, I know that. I have right rom version and baseband.. But overclocking is not working. I can set higher mhz in setCpu, but that's all.. no performance increase anywhere.. tried to play angry birds, but there still is some laggy levels. On slades87 roms overclocking totaly works. No lag in angry birds. In stock 2.1 rom what I get is just biger numbers and no performance increase. Sorry, for bad english.
ecb116 said:
Well i have 2.1.1.A.0.6 with xxx15 baseband stock rom rooted and the overclock works
However if i have the cpu set at 600MHz i get like 295 on quadrant and if i change cpu set to 710MHz i get 480 something.
how on earth did you get 745 ?
Click to expand...
Click to collapse
hmm.. that's weird buddy.. before i have an overclock, just have JIT and link2sd and dalvik cache has been moved to sdcard i have around 500-600 in quadrant.. i thinks that weird if you have an overclock but just have 295..
what quadrant app did u used? have u use quadrant advanced? or standart?
maybe doixanh can help you.. all i do to make it works rightly is just follow the instruction step by step..
maybe this can be help : i tried to reflashing before i used this module..
I used quadrant standard... weird indeed. Anyway maybe ill try slade's ROM or sth
ecb116 said:
I used quadrant standard... weird indeed. Anyway maybe ill try slade's ROM or sth
Click to expand...
Click to collapse
Hi, I would love to know your findings since I too am getting low result from quadrant.
Thanks
Related
Guys, i have updated my u20i to version 2.1.1.A.0.6. At a glance, it looks ok to me, but when i run benchmark like Neocore or Quadrant Advanced, it definitely shows that the graphic performance is lower in comparison with previous 2.0.0.A.2.4 one.
Previous:
Neocore :47.8FPS
Quadrant: 500-530 (60fps on 3D Planet)
Now:
Neocore: 37.8 FPS
Quadrant: 470-510 (42fps on 3D Planet)
Anybody feels the same issue? Or should i reflash it again? It's still vanilla install, just Link2SD and Rooted like before, and already reset to Factory Data Reset. No JIT though, and i don't wanna use JIT because of the Wifi problem.. Any suggestion would be great
Same with my x10mini... Hope someone can solve this
Yep, same with my E10i on 2.1.1.A.0.6, Quadrant scores are way down (fresh install with JIT enabled and multiple tries I can barely get over 545 in quadrant, most down around 500)... WTF? Stupid SE.. might have to switch back to .24
Anyone have idea why this might be?
Kiwi
kiwiBratwurst said:
Yep, same with my E10i on 2.1.1.A.0.6, Quadrant scores are way down (fresh install with JIT enabled and multiple tries I can barely get over 545 in quadrant, most down around 500)... WTF? Stupid SE.. might have to switch back to .24
Anyone have idea why this might be?
Kiwi
Click to expand...
Click to collapse
hello, how did u do with JIT? it is for the version .6?
can give me a TUT?
thx.....
Had the same issue.
For me changing heapsize to 32 helped.
Results with heapsize 30: 490 - 510
Results with heapsize 32: 530-590
serge327 said:
hello, how did u do with JIT? it is for the version .6?
can give me a TUT?
thx.....
Click to expand...
Click to collapse
Here we go dude, have a look here (Page 9 post #86)
Kiwi
illi4 said:
Had the same issue.
For me changing heapsize to 32 helped.
Results with heapsize 30: 490 - 510
Results with heapsize 32: 530-590
Click to expand...
Click to collapse
Thanks for that.. still not as fast as .24 but better than it was on heapsize 30
Kiwi
hmmm same here.. experienced major slow down on my device after updating... and my touch screen keeps hanging for some reason.. reverted to .24 at the moment.. found any solutions yet?
Slow7u said:
hmmm same here.. experienced major slow down on my device after updating... and my touch screen keeps hanging for some reason.. reverted to .24 at the moment.. found any solutions yet?
Click to expand...
Click to collapse
hello, may i ask how to go back to .24 from .6?
I thought this thread already gone down to the grave lol
small update: JIT is definitely more stable with .06 firmware, Wifi keep working for a long time. But still hangs when i rebooted and accessed the device too fast, but it's no big deal compared to the much more fluid gameplay of Angry Birds..
illi4 said:
Had the same issue.
For me changing heapsize to 32 helped.
Results with heapsize 30: 490 - 510
Results with heapsize 32: 530-590
Click to expand...
Click to collapse
Cool finding there bro, will try it now
Besides of slowdown, it seems that the graphics got stuttered.. Not bad, but disturbing.. :/
So I think we have gathered from this that 2.1.1.A.0.6 definately has some graphics and speed issues, the question is.. do we switch back to .24 or do we wait for SE to release another update?
perhaps people need to contact Sony Ericsson, play dumb and ask how to switch back to the old firmware because their phones are slower now... at least they would be awear of the problem then..
What to do.. what to do.. hrm.. (I really want to keep playing with 2.2 ports so might have to stick with 2.1.1.A.0.6 for a bit)
Kiwi
ummm there are alot of .24 roms available here in the forum just download whichever you think is best haha.. for me i just did a backup with xrecovery prior to updating my phone to .6, so just did a restore.. works good for me ^^
Hope this gets resolved.
Me, I am staying on .24 for now!
Slow7u said:
ummm there are alot of .24 roms available here in the forum just download whichever you think is best haha.. for me i just did a backup with xrecovery prior to updating my phone to .6, so just did a restore.. works good for me ^^
Click to expand...
Click to collapse
Well.. as .6 makes some kernel changes which are not touched by xrecovery, just switching back and forth with xrecovery backups isn't really changing from .6 - .24 etc.. and .24 frameworks will cause bootloop on .6 (perhaps not the other way round if you are running .24 backup on the .6 kernel.. you are still running .6 tho.. despite what you might think )
The only real way to switch between firmware is by flashing with Flashtool. (then you can restore your data and themes with xrecovery)
I'm only interested in testing Cyanogen mod which is unfortunately based on .6 firmware, so I will stick with it for now.
Kiwi
Slow7u said:
ummm there are alot of .24 roms available here in the forum just download whichever you think is best haha.. for me i just did a backup with xrecovery prior to updating my phone to .6, so just did a restore.. works good for me ^^
Click to expand...
Click to collapse
can give me the link of .24 world version???
thx in advance
Don't quite understand how could they make it so it slowers the phone down,updates are supposed to be bringing good things...hope they repair this soon.
me2 hope so ;D
What is the value debug.sf.hw in the file build.prop?
Should be =1
Me result in Quadrant, without kill any app, 563.
serge327 said:
hello, may i ask how to go back to .24 from .6?
Click to expand...
Click to collapse
Though I never done it but I think using xrecovery would do the job. Provided you install it in .6 as well.
Camogyp said:
What is the value debug.sf.hw in the file build.prop?
Should be =1
Me result in Quadrant, without kill any app, 563.
Click to expand...
Click to collapse
still same result, cantget 563, maximum around 540...
Today a tried ogo2's beta3 ROM. In SetCPU I can't change the frequency. There are min 480-max 600 Mhz, if I change the value, nothing happens. That's wrong because it drains my battery.
Yeah, same problem here... such a pity because other than that its a great ROM!
Not really an 'issue' - the kernel isn't set up to allow overclocking, so why would it?
Not just overclocking. I can't go under 480 Mhz. That's a bigger problem for me.
cserepg said:
Not just overclocking. I can't go under 480 Mhz. That's a bigger problem for me.
Click to expand...
Click to collapse
I don't think the kernel allows you to change clock speeds from the MAX600 MIN480 HTC set as the default. Not an issue, but that feature will be added sometime (ogo2 said it would eventually I think)
OK, I thought that the default min clock speed is 245 Mhz.
Oh ok, didn't know it depended on the kernel, thanks.. This may be a totally noob question, but this is the Q&A section so, can I not just flash another kernel that does enable overclocking...?
Guys, cannot start neither beta3 nor beta4. When flash beta3 (through Clockworkmod 3), the system doesn't load, green 'HTC' letters tend to reboot. After beta4 installation the same screen, but static - without any reboots. I have S-ON. Wiping doesn't help.
Please, advise what to do.
Cheers!
cserepg said:
Today a tried ogo2's beta3 ROM. In SetCPU I can't change the frequency. There are min 480-max 600 Mhz, if I change the value, nothing happens. That's wrong because it drains my battery.
Click to expand...
Click to collapse
I eventually answered my own question.. You can just flash another kernel.. Look under the Overclocking tutorial in the Dev section...
It's ok now, I am using B-ROM. In this I've got too much reboot, battery drain, GPS issues, etc. Maybe beta 5-6-7 will get a chance...
cserepg said:
It's ok now, I am using B-ROM. In this I've got too much reboot, battery drain, GPS issues, etc. Maybe beta 5-6-7 will get a chance...
Click to expand...
Click to collapse
I'm using Blay0's ROM as well, haven't had any issues so far... are u doing a full wipe before you flash the ROM...?
If I installing a different ROM I always do a full wipe sure. I did not do full wipe, if I installing a newer version of a same ROM. Btw the most stable ROM is Blayo's, next Cyanogen, but there are no new sense...
Well currently I'm using MiniCm7 pro V21 rom and using stock kernel.
I go to setting>CM settings>Performance>CPU setting and ticked OverClock.
Whenever I try to overclock my phone over 600mhz,for example: I set the phone to overclock to 652mhz, return to home, and then I go to setting again, it revert back to 600mhz itself
Why is that? Is it because I'm using stock kernel?
Can't overclock in MiniCm7 v20 pro rom
I have the same problem, when i choose more than 600mhz, then it will ben chosen automaticly 600mhz, could anyone help us ?
i'm using cm7 v20
I had the same problem, I don't remember what I did but you can try maybe installing SetCPU? Or you can go bottom on Settings>...>CPU Settings and tick "Set on Boot", then turning off the decive just after that.
Just an advice, don't OC it to 748+, just leave it at 748. Why? Because, if more than that, my phone gets unstable and it reboots after a few minutes. Just happens to me, I don't know about others.
nico444164 said:
I had the same problem, I don't remember what I did but you can try maybe installing SetCPU? Or you can go bottom on Settings>...>CPU Settings and tick "Set on Boot", then turning off the decive just after that.
Just an advice, don't OC it to 748+, just leave it at 748. Why? Because, if more than that, my phone gets unstable and it reboots after a few minutes. Just happens to me, I don't know about others.
Click to expand...
Click to collapse
Thanks for your method, but both of it doesn't work. So.... any other ideas?
Jericho4869 said:
Well currently I'm using MiniCm7 pro V21 rom and using stock kernel.
I go to setting>CM settings>Performance>CPU setting and ticked OverClock.
Whenever I try to overclock my phone over 600mhz,for example: I set the phone to overclock to 652mhz, return to home, and then I go to setting again, it revert back to 600mhz itself
Why is that? Is it because I'm using stock kernel?
Click to expand...
Click to collapse
Hi, Jericho4869
I tried many custom roms. almost all version of MiniCM7pro too.
And I'm not sure about which version, but early versions of MiniCM7pro was I can over clocked.
But I can't over clock on after v15 of MiniCM7pro.
What's the differences between the both ?
So I got some idea, it's a modules, specifically differences of x8oc.ko and x10minioc.ko I think...
>x8oc.ko is a can over clock without problems but if not set over clock to make device to slow down and lag coming up.
(So when I was not use over clock, I did delete or rename x8oc.ko fot the save performances of device)
>x10minioc.ko is a difficult to over clock on some device but if not use over clock but no adverse effects to processing speed.
It's can not o.c setting to enable or over 710 mhz to get unstable or shutdown or freeze and restart, it has many cases on my U20i
Anyway, I can't over clock over 710 mhz on MiniCM7pro v21 and MiniCM'9'Pro v1.2 (based on MiniCM7pro v21) both too, because the both use x10minioc.ko for over clocking.
My opinion is: If you want to try over clocking, you should to be choose another roms with custom kernels !!
However now I'm using ZombiePanic kernel and I choosing custom roms conditional on it's supported custom kernels. Because no problems for testing o.c.
IMPORTANT NOTES: (I know, maybe you already to know)
If you want to try to over clock, please you don't try on main device !!
If in case of under 710 mhz but it is get a alot of load on cpu of your device.
keep on over clock in long time is a serious risk of failure to your device !!
its not possible to overclock in minicm7pro. u can if u flash simple kernel. it has inbuilt oc modules. so try it!
i am trying for some time now to find a thread or post to help me overclock my mini at about 748 mhz . tha result : i found nothing..
please if someone knows how to do that help me..
i am using the latest minicm7 2.1.6 for mini and latest E10_nAa-08_2.6.29.6-nAa-08
kernel..
What exactly is your problem?
first thanx for replying
then.. what you cannot understand??
i said that i would like to overclock my x10 mini (E10i)
up to 748 mhz and if its not possible (i think it is)
i would like at least to OC it at 729 mhz..
now.. when i try to OC it , it freezes !!
(every time and if the OC is at 729 mhz or more..)
the most i have achieved is 691 mhz
edit:
also i saw your video and you had 729 mhz
the first time you tried putting cyanogenmod at 729 mhz
didnt it freeze?
salvinluckys said:
first thanx for replying
then.. what you cannot understand??
i said that i would like to overclock my x10 mini (E10i)
up to 748 mhz and if its not possible (i think it is)
i would like at least to OC it at 729 mhz..
now.. when i try to OC it , it freezes !!
(every time and if the OC is at 729 mhz or more..)
the most i have achieved is 691 mhz
Click to expand...
Click to collapse
this is what I did to my u20i.
go to cwm. do full wipe.
using nAa + cm7 you can:
OC= interactiveX gov + 768+
OC= ondemand gov +748
minimum OC should be 200+ to run smooth.
You can try these three variants of solving problem.
1.Reflash the rom, wiping battery stats, dalvik cache and factory reset.
2.Before setting maximum cpu, set minimal cpu up to 480 Mhz. Also uncheck Undervolt and set Perfomance mode.
3.Install another rom (not the good opinion ^_^)
Hope it helps.
P.S. My phone is now running 806 Mhz =), that means, that you had a mistake while installing firmware
Mrakoris/ said:
You can try these three variants of solving problem.
1.Reflash the rom, wiping battery stats, dalvik cache and factory reset.
2.Before setting maximum cpu, set minimal cpu up to 480 Mhz. Also uncheck Undervolt and set Perfomance mode.
3.Install another rom (not the good opinion ^_^)
Hope it helps.
P.S. My phone is now running 806 Mhz =), that means, that you had a mistake while installing firmware
Click to expand...
Click to collapse
is it running smoothly at 806? how did you do it? can you share your settings?
Mrakoris/ said:
You can try these three variants of solving problem.
1.Reflash the rom, wiping battery stats, dalvik cache and factory reset.
2.Before setting maximum cpu, set minimal cpu up to 480 Mhz. Also uncheck Undervolt and set Perfomance mode.
3.Install another rom (not the good opinion ^_^)
Hope it helps.
P.S. My phone is now running 806 Mhz =), that means, that you had a mistake while installing firmware
Click to expand...
Click to collapse
Ok... i have tried all these except for the last (third) option..
Unfortunately i didnt achive to make it work..
Do you think the problem is that i have flashed naa - 08 kernel instead of the naa -07
that it says it requires??
Also i ve thought about overvolting..
if you have any idea post..plzzz
again i thank all of u for the help you provide!!
EDIT:
I was playing around with higher freqs and when i tested 806 mhz
It froze instantly and the red led light came up..
I think this is a clue..
When red flashlight comes- that means your phone will reboot now, because it is freezed. It is normal. Try to install another rom, maybe your currently running firmware is not fully compatible with your phone, because it is custom :/
Hope It Helps.
Mrakoris/ said:
When red flashlight comes- that means your phone will reboot now, because it is freezed. It is normal. Try to install another rom, maybe your currently running firmware is not fully compatible with your phone, because it is custom :/
Hope It Helps.
Click to expand...
Click to collapse
Firstly, my phones red led comes up only when using 806 mhz.
With any other frequency it just freezes and reboot..
i have also noticed that when i apply 729 mhz
it doesnt freeze instantly even if i am using performance governor but only when i do something (ex. Press the home button or back button )..
shall i ask something?
Will this happen to all minicm future releases??
Hi all, sorry to interrupt but i have u20i and my cpu is only stable upto 729mhz. i think it is not the kernel and the rom but the chip and processor they have added in the phone. it is a hardware matter.
so guys, whatever rom you install it is the same result. no change.
i have installed numerous roms and i have the same oc 729mhz max. not more than that.
so stop fighting with how to get it to 800+mhz.
Thanks!
Tommylee567 said:
Hi all, sorry to interrupt but i have u20i and my cpu is only stable upto 729mhz. i think it is not the kernel and the rom but the chip and processor they have added in the phone. it is a hardware matter.
so guys, whatever rom you install it is the same result. no change.
i have installed numerous roms and i have the same oc 729mhz max. not more than that.
so stop fighting with how to get it to 800+mhz.
Thanks!
Click to expand...
Click to collapse
Are you trying to tell me that it will never work at such speeds (Over 691) ???
Thats a pity for such a good smartphone
yEAH he is right. its all about the chip you have some processor can go upto 800 Mhz and some remain only on lower frequencies even i remain on 691Mhz. We cant do nothing about it
@salvinluckys,
Yes, if you want a 800mhz phone then you have to have a luck to get one like you want.
It is hardware matter. you might consider looking at the scores after you do benchmarking, you will find some 800+ mhz doing just little near or above 2000 score. it doesnt matter if you have the highest score, all matters if your phone is capable to do whatever you need to do. that is what i am looking at.
Good day!
EDIT: Even people with the same frequency have 1800 (something) score. Dont feel bad about your phone. It is a good phone. and we are lucky to have awesome devs giving roms for us.
Thanks to all of you for helping me understand that its a hardware incapability..
Last question..
will this persist even if i overvolt and then OC my device?
(I dont know the way yet .. if you want to help me)
salvinluckys said:
overvolt and then OC
Click to expand...
Click to collapse
???
How is that?
Better you get a PC and try that. it is better so you will forget to do it for your phone
NEWS
Guys.. i have some news !!!
with the latest update of minicm 2.1.9 ( naa 11 kernel )
on 729 mhz my device is partially stable.. i will reboot either with hard use or
after a day or so..
NOW the big part..
while i was playing around with benchmarking ( antutu ) at 729 mhz i saw that the device was freezing only during the read or write test of my SD card which is 8 gb
and splitted in 3 partitions [ fat32 , ext4 ( or ext3 i dont remember ), swap ].
what do you believe??
is there a chance that the problem with overclocking has to do with the SD card??
(748 mhz still reboots after a few clicks on the screen depending on the governor)
salvinluckys said:
Guys.. i have some news !!!
with the latest update of minicm 2.1.9 ( naa 11 kernel )
on 729 mhz my device is partially stable.. i will reboot either with hard use or
after a day or so..
NOW the big part..
while i was playing around with benchmarking ( antutu ) at 729 mhz i saw that the device was freezing only during the read or write test of my SD card which is 8 gb
and splitted in 3 partitions [ fat32 , ext4 ( or ext3 i dont remember ), swap ].
what do you believe??
is there a chance that the problem with overclocking has to do with the SD card??
(748 mhz still reboots after a few clicks on the screen depending on the governor)
Click to expand...
Click to collapse
sorry but i really think it has nothing to do with sd card but a hardware limitation as u were told before... im in ur same situation... my x10mini cant oc over 691... its as simple as some phones can, others not, maybe depending on the date it was made... but dont worry!! ive been using it with 691 since last update and runs btilliant
I can go up to 825mhz without problem i have an x10 mini (E10i) with minicm7 2.1.9 and nAa's 11 kernel, thank you very much
I could oc it to 787 mhz,it is mostly stable.
Each device is different, not every device is capable of overclocking above 691. The most stable all over those devices is 691. No more! I am stable ta 748 with nAa.
Hi X10 mini users, Does anyone know how to speed up my x10 mini phone??? my x10 mini phone is already rooted and updated to android 2.3.7
-Renz29
Full details please? What rom?
Just flash nAa's rom, I've been using it for a year and half and now Im on a S3 mini. Link to the rom: http://forum.xda-developers.com/showthread.php?t=1415026
Mod/Rom: MINICM7Pro V21
Recovery: Clockworkmod v3.2.0.0-r5 x10mini
kernel and baseband is same like 2.1 version(sony official update)
-renz29
If you are in nAa. Go to settings/cyanogenmod settings/performance/ you can speed up your phone there
My performance settings
I used smartassV2 governer with min CPU frequency at 245 Mhz. not 122 mhz. i left the maximum frequency at 691 Mhz. this is because i hav so many apps syncronizing that i need the little extra power but surprizingly, it didnt affect my battery life. i also have undervolting enabled. i noticed compcache can slow the system down so i disabled it as well as surface dithering. i also enabled allow purging of assets. if you still having problems, use memory manager from playstore and play around with the settings there or use V6 supercharger. search for that on this forum. also, use seeder. that made a huge difference with my phone.
thas911 said:
I used smartassV2 governer with min CPU frequency at 245 Mhz. not 122 mhz. i left the maximum frequency at 691 Mhz. this is because i hav so many apps syncronizing that i need the little extra power but surprizingly, it didnt affect my battery life. i also have undervolting enabled. i noticed compcache can slow the system down so i disabled it as well as surface dithering. i also enabled allow purging of assets. if you still having problems, use memory manager from playstore and play around with the settings there or use V6 supercharger. search for that on this forum. also, use seeder. that made a huge difference with my phone.
Click to expand...
Click to collapse
nice info, thanks :good:
Hashy said:
If you are in nAa. Go to settings/cyanogenmod settings/performance/ you can speed up your phone there
Click to expand...
Click to collapse
please give me the steps... thanks Hashy... -Renz29
Flash cook rom and nAa kernel
Renz29 said:
Hi X10 mini users, Does anyone know how to speed up my x10 mini phone??? my x10 mini phone is already rooted and updated to android 2.3.7
-Renz29
Click to expand...
Click to collapse
I have use many rom of X10 mini pro. And i think this is the best rom
http://forum.xda-developers.com/showthread.php?t=1937993
suicune221 said:
I have use many rom of X10 mini pro. And i think this is the best rom
http://forum.xda-developers.com/showthread.php?t=1937993
Click to expand...
Click to collapse
can u give me the link for x10 mini thanks