Ok, it's a question a little bit silly and i did not know where to place it, I would like to know how to kill my phone, it has been not working well a lot and when I take the service technician never fails xD. I haven't found another solution, I'd read somewhere that when they tried to install Gingerbread, the cellphone was left without a signal, this can may be an option, but i not how to do it .. (Yes, I am a noob xD).
Ok sorry for my bad english, I'll write in spanish too, because I also know many people speak Spanish around here. Sorry
ok, es una pregunta un poco tonta y no sabia donde colocarla, me gustaria saber como matar a mi movil, es que ha estado fallando mucho y cuando lo llevo al servicio tecnico nunca falla xD, no he encontrado otra solucion, por ahi lei que cuando trataron de instalar Gingerbread, el celular se quedo sin señal, puede ser una opcion, pero no se como hacerlo.. ( si, soy un noob xD)
Click to expand...
Click to collapse
gilberthcordova said:
I'd read somewhere that when they tried to install Gingerbread, the cellphone was left without a signal, this can may be an option, but i not how to do it .. (Yes, I am a noob xD).
Click to expand...
Click to collapse
Yeah, that will work nicely. Flash stock 2.2, make nandroid backup, flash the Russian leak via the EXE (uncheck recovery), now go to recovery, wipe everything and restore the backup. No GSM. To finish the job, flash the stock recovery via ZIP.
(Chances are you will brick your phone before reaching that stage, which would be fine as well )
Flash your phone with kdz and during update, remove usb cable xd
Phone killed xd
doktornotor said:
Yeah, that will work nicely. Flash stock 2.2, make nandroid backup, flash the Russian leak via the EXE (uncheck recovery), now go to recovery, wipe everything and restore the backup. No GSM. To finish the job, flash the stock recovery via ZIP.
(Chances are you will brick your phone before reaching that stage, which would be fine as well )
Click to expand...
Click to collapse
lol, i'll try this, thank you xD
ccdreadcc said:
Flash your phone with kdz and during update, remove usb cable xd
Phone killed xd
Click to expand...
Click to collapse
Unlikely. Usually easily fixable via emergency mode. (Did quite a couple of times). The "broken" GSM method with no SIM detected plus no IMEI usually makes the service guys to change PCB or give you a new phone. Lot better.
Flash your phone with kdz and during update, remove usb cable xd
Phone killed xd
Click to expand...
Click to collapse
Unlikely. Usually easily fixable via emergency mode. (Did quite a couple of times). The "broken" GSM method with no SIM detected plus no IMEI usually makes the service guys to change PCB or give you a new phone. Lot better.
Click to expand...
Click to collapse
I don't think so coz u can just flash stock rom via kdz and the problem will be solved..!!
Sent from my LG-P500 using XDA App
digkong said:
I don't think so coz u can just flash stock rom via kdz and the problem will be solved..!!
Click to expand...
Click to collapse
1/ There is no reason for the service guys to flash since the phone (SW) is working just "fine", except that it is no longer a phone (no GSM).
2/ Even KDZ will not save it when you skip the NV2 file restore (also tested by a couple of brick-makers here.)
3/ Everyone here who screwed the phone by messing it up with the Russian leak (no GSM) had no trouble getting a PCB changed or getting a replacement phone. So, I think that makes the method quite plausible.
Related
Hi,
I have a great problem with my device.
Some days ago my device turned off and I could not to use because it freezed in samsung logo screen and I could only use download mode because did not work recovery mode.
I spoke with a technical departmente at 'El corte Inglés' because they works with Samsung and the guy that saw my device told me that the eeprom memory is died and I can't send it to official service technical because they will see that the device has been modified by me (roms, kernel, etc) ...
Well this is my great problem.
Do you know what can I do for delete the counters in download mode or do anything with eeprom memory ?
Thanks!!!
Well...you could always flash another ROM.....
what is eeprom memory anyway? sounds made up.
gastonw said:
Well...you could always flash another ROM.....
what is eeprom memory anyway? sounds made up.
Click to expand...
Click to collapse
Yes, I thought about it.. hehe
I think eeprom memory is the place where the device store his data (rom, kernel, IMEI, etc).
Thanks
PS: You know a rom that it has '.tar' archive for flash it with Odin ?
yeah, try jb leak:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
Don't ever trust a guy from a placed called after a meat cut. (El corte Inglés es también conocido como "Bife americano")
gastonw said:
yeah, try jb leak:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
Don't ever trust a guy from a placed called after a meat cut. (El corte Inglés es también conocido como "Bife americano")
Click to expand...
Click to collapse
Hahahaha I did not know it !!
Thanks for your help
np. Report back if it worked tho, so I can start printing the "go eeprom yourself" t-shirts.
First sorry for my ingles.Espero that I understand.
The samsung s2 has the problem that the off and on always restarts with the same settings. I have restored from the recovery does not work. I recognized the odin, kies ... I updated anyway. Apparently all ok. But again on restart the same configuration (same app, photo files ....).
I even tried formatting from cmd. According windows all ok .... to restart the same as if he had not done anything.
That do not.
It is orange and I'm working without sim card.
Application is one that has not is "SIM TOOL KIT".
I always start to appear the following notifications:
* -Preparing USB storage.
-Preparing Sd card
Energy-saving enabled.
Multimedia-media search.
Scan-media
Whatsapp-error.
Please help. Thank you
orbayo said:
First sorry for my ingles.Espero that I understand.
The samsung s2 has the problem that the off and on always restarts with the same settings. I have restored from the recovery does not work. I recognized the odin, kies ... I updated anyway. Apparently all ok. But again on restart the same configuration (same app, photo files ....).
I even tried formatting from cmd. According windows all ok .... to restart the same as if he had not done anything.
That do not.
It is orange and I'm working without sim card.
Application is one that has not is "SIM TOOL KIT".
I always start to appear the following notifications:
* -Preparing USB storage.
-Preparing Sd card
Energy-saving enabled.
Multimedia-media search.
Scan-media
Whatsapp-error.
Please help. Thank you
Click to expand...
Click to collapse
i am sorry but i cant understand ur english buddy
sorry.
s2 always restarts at the same settings
I made the recovery wippe with nothing ....... same as before
with ODIN I updated the rom ....... nothing all equal
I updated with KIES ekl ............. nothing all equal
in windows with cmd (msd 2) I formatted the memory ......... nothing all equal
to restart the same settings
I hope you understand me a little more.
thanks.
Wipe data
Dalvik cache
And any new rom
Sent from my GT-I9100 using XDA Premium 4 mobile app
orbayo prueba a instalar otra rom y luego instalar la que estes usando, pero primero desde CWM formatea /system espero haberte ayudado
Un saludo
Sent from my TF101 using XDA Premium 4 mobile app
byZuga said:
orbayo prueba a instalar otra rom y luego instalar la que estes usando, pero primero desde CWM formatea /system espero haberte ayudado
Un saludo
Sent from my TF101 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think I've done but the old settings ..... restart, same everything.
Aclarame what you want to do.
thanks
khalidr said:
Wipe data
Dalvik cache
And any new rom
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I like that. please tell me more clear.
thanks
Prueba
orbayo said:
I like that. please tell me more clear.
thanks
Click to expand...
Click to collapse
Veo que eres español jejeje Por lo de "Aclarar" Mira tienes que entrar en el recovery (al encender mantienes volumen arriba+home+apagar)
cuando estes dentro moviendote con las teclas de volumen tienes que formatear /system y instalar otra rom. (necesitas CWM si no lo tienes busca por este increible foro espero haberte ayudado
has aterncc
From the way you write your post, I can see and pretty sure you came from a stock ROM although it is very hard to understand what you are trying to say. May I know if your phone rooted? If not, you can use the search button on XDA to find out more on how to root and flash a new custom ROM for your phone. From there, you can do a full wipe, dalvik cache, etc. through the recovery mode. If you prefer, you can opt to flash a stock one. If you are still on warranty, I suggest you send your phone for repair. Always remember to do a backup!
Some keywords that might help you are "Clockworkmod", "TWRP recovery", and "NeatROM".
Hope that helps.
Not under warranty.
Nothing I do is valid. Restarting the phone loads the previous configuration. Not root or can. I can not find solution ... Help
Q&A for [GB] Advanced Xperia X10i ROM /FINAL/ [15.06.13]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GB] Advanced Xperia X10i ROM /FINAL/ [15.06.13]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
get into xrecovery problem!
Hi, I have a serious problem. Due to WIFI ERROR problem, I decide flash this rom again. I flashed AX_x10i_part_1.zip, AX_x10i_part_2.zip and all updates in one time. Now my phone wont boot up neither wont get into Xrecovery. How Can I do to restoure my phone, Please help!!!!!
Yuxing said:
Hi, I have a serious problem. Due to WIFI ERROR problem, I decide flash this rom again. I flashed AX_x10i_part_1.zip, AX_x10i_part_2.zip and all updates in one time. Now my phone wont boot up neither wont get into Xrecovery. How Can I do to restoure my phone, Please help!!!!!
Click to expand...
Click to collapse
Hi, this is a bug that appears only to a few phones, really rear. Make sure that you bootloader is unlocked before you do anything else. From here on there are two options: either preinstall the phone or flash new firmware (ftf). This will fix your phone. The only thing that you need to do after is to flash doomkernel that will give you recovery. If you still want to flash my rom you need to install wifi modules as the kernel has some problems with it. So the installation will look like this - flash part 1 then 2, the other fixes and finally flash the wifi modules. Peace
Denie46 said:
Hi, this is a bug that appears only to a few phones, really rear. Make sure that you bootloader is unlocked before you do anything else. From here on there are two options: either preinstall the phone or flash new firmware (ftf). This will fix your phone. The only thing that you need to do after is to flash doomkernel that will give you recovery. If you still want to flash my rom you need to install wifi modules as the kernel has some problems with it. So the installation will look like this - flash part 1 then 2, the other fixes and finally flash the wifi modules. Peace
Click to expand...
Click to collapse
Thanks for your replying Denie, My phone was unlocked, and it had feralab rom (I dont remember what name exactly was). Due to feralab was very slow so I decided to change ROM.
I installed xrecovery according to the right procedure, and followed the step that you mentioned in the beginning of this post to install advance xperia x10i rom, and it worked for me. I very liked this rom because it´s what I looking for, except the WIFI bug. Then I tryed to flash again but I forgot to do the first boot after flashing the first .zip. Finally, I couldnt bootup neither get into xrecovery again.
Can you send me some recovering procedure and link to download the new firmware? also please indicates the link to download the stable version of doomkernel.
Appreciated very much your help, thank you!
Tethering is not working
Yuxing said:
Thanks for your replying Denie, My phone was unlocked, and it had feralab rom (I dont remember what name exactly was). Due to feralab was very slow so I decided to change ROM.
I installed xrecovery according to the right procedure, and followed the step that you mentioned in the beginning of this post to install advance xperia x10i rom, and it worked for me. I very liked this rom because it´s what I looking for, except the WIFI bug. Then I tryed to flash again but I forgot to do the first boot after flashing the first .zip. Finally, I couldnt bootup neither get into xrecovery again.
Can you send me some recovering procedure and link to download the new firmware? also please indicates the link to download the stable version of doomkernel.
Appreciated very much your help, thank you!
Click to expand...
Click to collapse
I see, so here is what you have to do:
1. make sure you have flashtool as you're going to need it
2. download the two attached files, one is the kernel itself ( it is .ftf just unrar it) which you have to flash using flashtool, the other is to be flashed using xrecovery (wifi modules)
3. download the firmware from the link : http://www.mediafire.com/download/v...3.0.1.G.0.75_GLOBAL-GGL_GENERIC_1232-9897.rar it is a rar file, just pull the ftf file out from it.
4. start flashtool and flash the firmware, as you should know everyhing from your phone will be deleted
5. after the firmware is flashed, flash the kernel (the ftf file) the absolutely same way the firmware is flashed
6. start the phone, when you see the blue light on the phone start pressing the back button in order to get into xrecovery, from there flash the wifi modules and you're done. You'll have a stock rom with fully customized kernel so you can start from the beggining and flash any rom you wish.
NOTICE: the two attached files are property of DoomLord, thank him if you like the kernel
As for the tethering i'm aware that this bug can appear but usually hard reset or preinstalling the rom will clean it out.
Thanks for help!
Denie46 said:
I see, so here is what you have to do:
1. make sure you have flashtool as you're going to need it
2. download the two attached files, one is the kernel itself ( it is .ftf just unrar it) which you have to flash using flashtool, the other is to be flashed using xrecovery (wifi modules)
3. download the firmware from the link : it is a rar file, just pull the ftf file out from it.
4. start flashtool and flash the firmware, as you should know everyhing from your phone will be deleted
5. after the firmware is flashed, flash the kernel (the ftf file) the absolutely same way the firmware is flashed
6. start the phone, when you see the blue light on the phone start pressing the back button in order to get into xrecovery, from there flash the wifi modules and you're done. You'll have a stock rom with fully customized kernel so you can start from the beggining and flash any rom you wish.
NOTICE: the two attached files are property of DoomLord, thank him if you like the kernel
As for the tethering i'm aware that this bug can appear but usually hard reset or preinstalling the rom will clean it out.
Click to expand...
Click to collapse
Dear Denie,
Many thanks for your procedure, right now my phone is working at least. However after the step 4, I was trying to flash Doomkernel ftf file with flashtool and I found the following error message:
15/004/2014 15:04:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
15/004/2014 15:04:20 - ERROR - Error flashing. Aborted
What is the problem?
Appreciated very much your help thank you!
Yuxing said:
Dear Denie,
Many thanks for your procedure, right now my phone is working at least. However after the step 4, I was trying to flash Doomkernel ftf file with flashtool and I found the following error message:
15/004/2014 15:04:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
15/004/2014 15:04:20 - ERROR - Error flashing. Aborted
What is the problem?
Appreciated very much your help thank you!
Click to expand...
Click to collapse
Glad you made progress! Not really sure what actually causes this error, it may be flashtool or the ftf file. This had happened to me several times. Here's what to do:
when you choose the ftf file to flash check the NO FINAL VERIFICATION box, this should do. Keep in mind that this is risky because if you choose to flash ftf file that is not made for your phone, flashtool will not cancel the flashing operation and that will brick your phone. That's why make sure that you flash the right file , other than that this so called fix, is safe to use.
You better download the kernel from attachment again, sometimes files mess up when downloadin, no idea why. Be sure to notify me for any progress you do so that i can help.
Denie46 said:
Glad you made progress! Not really sure what actually causes this error, it may be flashtool or the ftf file. This had happened to me several times. Here's what to do:
when you choose the ftf file to flash check the NO FINAL VERIFICATION box, this should do. Keep in mind that this is risky because if you choose to flash ftf file that is not made for your phone, flashtool will not cancel the flashing operation and that will brick your phone. That's why make sure that you flash the right file , other than that this so called fix, is safe to use.
You better download the kernel from attachment again, sometimes files mess up when downloadin, no idea why. Be sure to notify me for any progress you do so that i can help.
Click to expand...
Click to collapse
Thanks for your soon replying!
I downloaded .ftf more than 2 time, but still no luck... Is it possible that I flash the kernel in recovery mode?
I checked my actual android kernel version: 2.6.29-00054-g5f01537 [email protected] #1.
Thank you again!
Please ,help me!
I installed this rom, but when I install it does not get the wifi.
so I tried to fix the first part I replaced all the files that had the wifi name and files from my old rom that took the wifi and got dressed.
But when I try to install the second part 2 of the wifi to catch.
Could someone help me?
since already, thank you.
Note: Ja tried installing kernel Doomlord alert by FlashTool, but I can not, error appears.
Yuxing said:
Thanks for your soon replying!
I downloaded .ftf more than 2 time, but still no luck... Is it possible that I flash the kernel in recovery mode?
I checked my actual android kernel version: 2.6.29-00054-g5f01537 [email protected] #1.
Thank you again!
Click to expand...
Click to collapse
Then the only way you can flash it is to check no final verification on flashtool, this should do, check the attached screenshot if you don't understand what to do.
hitireyes said:
I installed this rom, but when I install it does not get the wifi.
so I tried to fix the first part I replaced all the files that had the wifi name and files from my old rom that took the wifi and got dressed.
But when I try to install the second part 2 of the wifi to catch.
Could someone help me?
since already, thank you.
Note: Ja tried installing kernel Doomlord alert by FlashTool, but I can not, error appears.
Click to expand...
Click to collapse
You need the wifi modules for Doomlord's kernel in order for the wifi to work. check this post and download the attached files, only the attached files. Flash the kernel via flashtool, flash the modules via xrecovery. http://forum.xda-developers.com/showpost.php?p=56549160&postcount=6
I did not see the post above, but the problem and the same as mine.
That does not happen because the kernel version is not the X10i?
Error: h t t p : / / tinypic.com/r/2vsln2t/8
You could not upload the modules to your wifi?
Because no module that I downloaded works.
or could tell me what are the files of parte2 that interfere with wifi, so I delete.
Thank you in advance!
Denie46 said:
Then the only way you can flash it is to check no final verification on flashtool, this should do, check the attached screenshot if you don't understand what to do.
You need the wifi modules for Doomlord's kernel in order for the wifi to work. check this post and download the attached files, only the attached files. Flash the kernel via flashtool, flash the modules via xrecovery. http://forum.xda-developers.com/showpost.php?p=56549160&postcount=6
Click to expand...
Click to collapse
Dear Denie,
I tryed to activate the option you show me last time, however, still no luck... the error mesage still there. Any ideal?
thank you!
Yuxing said:
Dear Denie,
I tryed to activate the option you show me last time, however, still no luck... the error mesage still there. Any ideal?
thank you!
Click to expand...
Click to collapse
This is strange, i'll flash these files myself, another thing that comes to my mind is to look for a new version of flashtool or at least different version. Will write back as soon as i test the files.
Greetings!
Hi Denie46:
I have in my E10i , the ROM Android 4.1.2 JB Mini Project , which recently installed. The situation is behaving very slow sometimes and data use for navigation or some messaging by WHATTSAP not work.
I have decided to change ROM , and looking , I liked developed by you. I would like to know:
Is your ROM working yet ?
Data usage, is working?
Errors that are discussed in this post have been corrected ?
Can you provide me the link to download the appropriate kernel?
Can you tell me which files (.zip ) to install and in what order are they?
In advance , thank you for your attention.
Carlos RD
*********************************
Hola Denie46:
Tengo en mi E10i una ROM con Android 4.1.2 JB Mini Project, que instale recientemente. La situación es que se comporta en ocasiones muy lento y el uso de datos para navegar o mensajear por WHATTSAP no funciona.
Tengo decidido cambiar de ROM, y buscando, me ha gustado la desarrollada por Usted. Me gustaría saber lo siguiente:
Aún está vigente?
Funciona el uso de datos?
Los errores que se comentan en este post, han sido corregidos?
Me puede proporcionar el vínculo para descargar el kernel más adecuado?
Me puede decir cuáles son los archivos (.zip) a instalar y en qué orden?
De antemano, mil gracias por su atención.
Carlos RD.
salut wifi ne marche pas !!!!
salut wifi ne marche pas !!!!
good job
[GB] Advanced Xperia X10i ROM /FINAL/ [15.06.13]
Dear Denie
I have installed Part 1, part 2, n2-v3, last udate & second last update; All is working very fine but wifi is not working.
Then i installed wifi module "x10_gb_DooMKernel-v06-1113_wifi.zip "
but still wifi is showing "Error"
Plz help.
thanks in advance...
Dude, got a bug. Wi fi ain't turning on . Display an error
I have an Sky Devices Fuego 4.0d, one of the free ones from a cell phone carrier i got. I loaded the wrong rom and now phone wil not turn on. I have tried all the Nand roms I can find, none which work. Seems I can download nand roms to phone and it says pass using sp flash tool 3.1344 but phone when turned on will only flash white screen and camera flash will stay on solid. It seems I believe I have a 512 rom and 256 ram. I remember it said it only had a little over 200mb available space left on phone when first turned on. All the roms I found in sp tool say the phone is 4096 + 2056mb something like that. Tried emmc roms and will not load error out saying emmc chip not found only nand on phone. So what I think I need is a rom for the 512mb 256mb phone. I did take a readback of rom but it did not backup correctly and cannot reload to phone. Any help pls Thanks
Any one of you have a rom dump that can upload...
Any one of you have a rom dump that can upload here for my fuego 4.0d
Fuego has about 127 MB of free ROM Thanks
here
https://drive.google.com/drive/folders/0B6Qoy7ud5Vh1dVc5NmtuWkpZWVE
puntoazul said:
here
https://drive.google.com/drive/folders/0B6Qoy7ud5Vh1dVc5NmtuWkpZWVE
Click to expand...
Click to collapse
Good morning my friend. I've tryed to access the link, but google says the file is in recycle folder. Can you give me access to the file? Advanced thanks....
puntoazul said:
here
https://drive.google.com/drive/folders/0B6Qoy7ud5Vh1dVc5NmtuWkpZWVE
Click to expand...
Click to collapse
Buenos días hermano. Tendrás aún disponible esa ROM? Tengo un Sky 4.0D bricked y según he leído esa lo trae de la muerte.
Gracias de antemano.
Hi to all of you guys,I´m just sharing my TWRP recovery after being modified to read hardware partition, and the backup of my Hw partition,so you´ll be able to enable dual sim feature on your Z2p...
Instructions:
1.- Unlock bootloader,there are many guides for this thing.
2.-Flash a TWRP recovery for your phone
3.-Make any backup of your choice,a folder will be created in your internal memory.
4.-Open that carpet in your pc and copy my 2 files to your TWRP folder.
5.-Restore my recovery and reboot to recovery.
6.-In this point,go to restore and you will see,Hw partition to restore.
7.-Restore it and reboot to system.
We changed the recovery,so,to avoid bootloops you will have to root,I used Magisk for that o flash any dm verity disabler available on internet.
If you need some help,message me on [email protected]
Files needed in the first comment below...Thanks
Here it is guys,here yoy will find my backup,just rename it to rar and that´s it.
You will find my modified recovery and the hw partition backup.
Thanks to all of you !!
it works
This actually works, but must be done with recovery that its provided on the recovery, wont work with any other.
also it stays with SIM 2 IMEI: 0, that will work in some countries.
but for Mexico we must find a way to write an IMEI on to SIM 2.
but excellent way to make SIM 2
Question
jovart said:
This actually works, but must be done with recovery that its provided on the recovery, wont work with any other.
also it stays with SIM 2 IMEI: 0, that will work in some countries.
but for Mexico we must find a way to write an IMEI on to SIM 2.
but excellent way to make SIM 2
Click to expand...
Click to collapse
friend, you discovered how to write the IMEI on to SIM 2, thank you very much in advance since I have a xt1710-06 that you have for lso two sim but only shows me one and in the system does not show me the options of sim 2
adsolon sorry I haven't found a way to write an IMEI to SIM2, but still checking for different apps, I'm sure their its one out there
AT&T Mexico Dual SIM Working
OK guys, Found a way to make it work on AT&T mexico, phone must be Factory Unlocked
1.- save your data, since all will be lost, so also back up EFS.
2.- Follow steps provided by riesgon3 on this 1st post.
3.- Load into recovery from riesgon3 one more time and start from step 5 from riesgon3 instructions, it will successfully load with riesgon3 recovery,
4.- load into initial screen of your moto z2 play, you must remove the AT&T mexico Sim card.
5.- now follow steps from here https://forum.xda-developers.com/z2-play/how-to/stock-stock-firmware-t3630997
**but you must load the following Retail rom RETAIL/ALBUS_RETAIL_7.1.1_NPSS26.118-19-1-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip.
** don't know if works with others, but this one works**
6.-Load Initial Setup of your Moto Z2 play ( With out At&T Sim Card), load all updates, this will update the dual Sim App, restart phone with 2 sims.
**This time it will load the dual sim app automatic an your all set
Very especial Thanks to riesgon3 who was able to create a way to load dual SIM.
Thanks to all of you for the help, in fact I made this change just to satisfy my needs, but I'm to be able to help other crazy guys like me.. Hahaha..
Another way to make it work is put your phone in fastboot mode.
In fastboot, we have to type:
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
And that is it, we can see the new baseband called with dsds for dual sim on it.
ayuda por favor
jovart said:
adsolon sorry I haven't found a way to write an IMEI to SIM2, but still checking for different apps, I'm sure their its one out there
Click to expand...
Click to collapse
apologize friend, you could help me still can not make me recognize the two sim, I do not see the folder to restore or let me copy the recovery of the companion to my folder could you give me step by step as you did
I can help
adsolon said:
apologize friend, you could help me still can not make me recognize the two sim, I do not see the folder to restore or let me copy the recovery of the companion to my folder could you give me step by step as you did
Click to expand...
Click to collapse
Friend,find me on whatsapp.. +5213317914884
jovart said:
OK guys, Found a way to make it work on AT&T mexico, phone must be Factory Unlocked
1.- save your data, since all will be lost, so also back up EFS.
2.- Follow steps provided by riesgon3 on this 1st post.
3.- Load into recovery from riesgon3 one more time and start from step 5 from riesgon3 instructions, it will successfully load with riesgon3 recovery,
4.- load into initial screen of your moto z2 play, you must remove the AT&T mexico Sim card.
5.- now follow steps from here https://forum.xda-developers.com/z2-play/how-to/stock-stock-firmware-t3630997
**but you must load the following Retail rom RETAIL/ALBUS_RETAIL_7.1.1_NPSS26.118-19-1-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip.
** don't know if works with others, but this one works**
6.-Load Initial Setup of your Moto Z2 play ( With out At&T Sim Card), load all updates, this will update the dual Sim App, restart phone with 2 sims.
**This time it will load the dual sim app automatic an your all set
Very especial Thanks to riesgon3 who was able to create a way to load dual SIM.
Click to expand...
Click to collapse
Hey! Which model do you used? Since the model described in that thread is the XT1710-07 and the version I have is the 06 I just wanted to be sure.
Thanks
riesgon3 said:
Here it is guys,here yoy will find my backup,just rename it to rar and that´s it.
You will find my modified recovery and the hw partition backup.
Thanks to all of you !!
Click to expand...
Click to collapse
Disculpa amigo pero le cambio de .watch a .rar y no reconoce el twrp como si fuera un recovery guardado como puedo hacer ayuda por favor ..
Will this work on verizon's moto z2 play ??
how did u revert this? i have the at&t mexico version and doesnt work second one, so i want to disable it
works in xt1710-06
Mexico IMEI 0 solution.....
In most of the countries the IMEI 0 doesn't work, but in some EU carriers it does.
If you are using an at&t mz2p with a second SIM with a 0 IMEI just flash the Verizon firmware and voilà!!! I'm gonna still have the null IMEI but u gonna have a fully functional second SIM.
Enviado desde mi XT1710-02 mediante Tapatalk
It works..
Khanov said:
how did u revert this? i have the at&t mexico version and doesnt work second one, so i want to disable it
Click to expand...
Click to collapse
the second sim works fine...Just use it on Telcel or Unefon carrier and you will be fine
Yes !
sasuke2656 said:
works in xt1710-06
Click to expand...
Click to collapse
As fas as we know...Yes
riesgon3 said:
the second sim works fine...Just use it on Telcel or Unefon carrier and you will be fine
Click to expand...
Click to collapse
Hi, i've a xt1710-06 , i not trying but if i unlock the bootloader i can relock bootloader and Still works the mod??
Are you sure if IMEI 0 works on Telcel, Unefon (Maybe freedompop)? i'm from México. Thnks
Yes, you can..
dozel said:
Hi, i've a xt1710-06 , i not trying but if i unlock the bootloader i can relock bootloader and Still works the mod??
Are you sure if IMEI 0 works on Telcel, Unefon (Maybe freedompop)? i'm from México. Thnks
Click to expand...
Click to collapse
Yes.. You can relock the bootloader and the mod will remain.
I am sure it works with Telcel and Unefon, i used it.. MOVISTAR does not work, maybe a few months before, but not now.. If freedompop uses Telcel signal, it will work, if it uses Movistar signal, it does not..
Saludos!!
riesgon3 said:
Thanks to all of you for the help, in fact I made this change just to satisfy my needs, but I'm to be able to help other crazy guys like me.. Hahaha..
Another way to make it work is put your phone in fastboot mode.
In fastboot, we have to type:
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
And that is it, we can see the new baseband called with dsds for dual sim on it.
Click to expand...
Click to collapse
That's work fine ??