Related
Ok, it's a question a little bit silly and i did not know where to place it, I would like to know how to kill my phone, it has been not working well a lot and when I take the service technician never fails xD. I haven't found another solution, I'd read somewhere that when they tried to install Gingerbread, the cellphone was left without a signal, this can may be an option, but i not how to do it .. (Yes, I am a noob xD).
Ok sorry for my bad english, I'll write in spanish too, because I also know many people speak Spanish around here. Sorry
ok, es una pregunta un poco tonta y no sabia donde colocarla, me gustaria saber como matar a mi movil, es que ha estado fallando mucho y cuando lo llevo al servicio tecnico nunca falla xD, no he encontrado otra solucion, por ahi lei que cuando trataron de instalar Gingerbread, el celular se quedo sin señal, puede ser una opcion, pero no se como hacerlo.. ( si, soy un noob xD)
Click to expand...
Click to collapse
gilberthcordova said:
I'd read somewhere that when they tried to install Gingerbread, the cellphone was left without a signal, this can may be an option, but i not how to do it .. (Yes, I am a noob xD).
Click to expand...
Click to collapse
Yeah, that will work nicely. Flash stock 2.2, make nandroid backup, flash the Russian leak via the EXE (uncheck recovery), now go to recovery, wipe everything and restore the backup. No GSM. To finish the job, flash the stock recovery via ZIP.
(Chances are you will brick your phone before reaching that stage, which would be fine as well )
Flash your phone with kdz and during update, remove usb cable xd
Phone killed xd
doktornotor said:
Yeah, that will work nicely. Flash stock 2.2, make nandroid backup, flash the Russian leak via the EXE (uncheck recovery), now go to recovery, wipe everything and restore the backup. No GSM. To finish the job, flash the stock recovery via ZIP.
(Chances are you will brick your phone before reaching that stage, which would be fine as well )
Click to expand...
Click to collapse
lol, i'll try this, thank you xD
ccdreadcc said:
Flash your phone with kdz and during update, remove usb cable xd
Phone killed xd
Click to expand...
Click to collapse
Unlikely. Usually easily fixable via emergency mode. (Did quite a couple of times). The "broken" GSM method with no SIM detected plus no IMEI usually makes the service guys to change PCB or give you a new phone. Lot better.
Flash your phone with kdz and during update, remove usb cable xd
Phone killed xd
Click to expand...
Click to collapse
Unlikely. Usually easily fixable via emergency mode. (Did quite a couple of times). The "broken" GSM method with no SIM detected plus no IMEI usually makes the service guys to change PCB or give you a new phone. Lot better.
Click to expand...
Click to collapse
I don't think so coz u can just flash stock rom via kdz and the problem will be solved..!!
Sent from my LG-P500 using XDA App
digkong said:
I don't think so coz u can just flash stock rom via kdz and the problem will be solved..!!
Click to expand...
Click to collapse
1/ There is no reason for the service guys to flash since the phone (SW) is working just "fine", except that it is no longer a phone (no GSM).
2/ Even KDZ will not save it when you skip the NV2 file restore (also tested by a couple of brick-makers here.)
3/ Everyone here who screwed the phone by messing it up with the Russian leak (no GSM) had no trouble getting a PCB changed or getting a replacement phone. So, I think that makes the method quite plausible.
i dont know what else to do to flash my tg01 with wp7. i tried every guide that i found in this forum but looks like notthing work for me. also jonnyhall1bmx1 helped me to fix it but there is no way. so i made a video maybe someone can help me to find what is wrong.
http://www.youtube.com/user/odino10?feature=guide
Invalid CheckSum!
Nand have bad blocks！！No way!!!
qinwengui said:
Invalid CheckSum!
Nand have bad blocks！！No way!!!
Click to expand...
Click to collapse
what u mean?
0dino said:
what u mean?
Click to expand...
Click to collapse
Nand, the flash memory on which you write your rom is corrupt, possibly permanently damaged.
Bad blocks cannot be written to.
My suggestion, try and get back to windows mobile, if thats not possible, and that wouldn't surpise me, i dunno what you should do, do you have a riff box handy?
The physical bad blocks can not erase used riff jtag box .
NO way！ You understand?
qinwengui said:
The physical bad blocks can not erase used riff jtag box .
NO way！ You understand?
Click to expand...
Click to collapse
Yes i understand, but what if? Has the OP tried? I know what bad blocks are
wait wait, u guys r confusing me.
i saw in the guides that when u get "invalid checksum" at 99% its a regular error when u flash the wp7boot.bin. why should be different for me?
Nand, the flash memory on which you write your rom is corrupt, possibly permanently damaged.
Bad blocks cannot be written to.
My suggestion, try and get back to windows mobile, if thats not possible, and that wouldn't surpise me, i dunno what you should do, do you have a riff box handy?
Click to expand...
Click to collapse
i can flash back to wm6.5 but it wont start. the phone after i flash back just run a green led for like 3 sec then go off. no i dont have riff box handy.
0dino said:
wait wait, u guys r confusing me.
i saw in the guides that when u get "invalid checksum" at 99% its a regular error when u flash the wp7boot.bin. why should be different for me?
Click to expand...
Click to collapse
NO, is not regular error at 99%- you have to wait 100 % or to flash agai- but you go to next step, to flash wp7 rom ...
mirolg said:
NO, is not regular error at 99%- you have to wait 100 % or to flash agai- but you go to next step, to flash wp7 rom ...
Click to expand...
Click to collapse
ok then, how to fix it? i tried to flash the wp7.bin again and again... but always the same error.
0dino said:
ok then, how to fix it? i tried to flash the wp7.bin again and again... but always the same error.
Click to expand...
Click to collapse
Yes, i think you have a bricked TG01 i am afraid
Unfortunately that is the risk of playing with putting WP7 on your TG01, i should imagine tens of phones have been bricked trying to do this. Its not a safe procedure, and anybody who says otherwise is not telling the truth.
its funny how i have said plenty of times not to try and flash wp7 if you are an unexperienced flasher. but yet people choose to ignore my message then i get pm messages from people telling me to fix there tg01 as they have broke it. ive helped a few people out but i do not have the time to help everyone !! so if you try to flash wp7 and you are not 100% on what you are doing and you are unexperienced etc and you brick your device and come running to me asking to fix your tg01 i will just laugh at you
jonnyhall1bmx1 said:
its funny how i have said plenty of times not to try and flash wp7 if you are an unexperienced flasher. but yet people choose to ignore my message then i get pm messages from people telling me to fix there tg01 as they have broke it. ive helped a few people out but i do not have the time to help everyone !! so if you try to flash wp7 and you are not 100% on what you are doing and you are unexperienced etc and you brick your device and come running to me asking to fix your tg01 i will just laugh at you
Click to expand...
Click to collapse
im wondering how u become so pro without testing....
im no pro sometimes some one has to take a leap of faith i think i was the second or 3rd to flash. i bricked my tg01 several times flashing wp7 because i didnt know any 1 that flashed it that could give me tips. because I risked my tg01 flashing wp7 i can now report back to unexperienced people that, wp7 is too buggy and is not worth the risk
The same experience......
I have the same ERROR!
I guess the NAND is bad.
I tried to use RIFF BOX,but cannot be restored...
I'll find a new method...
That's really a tragedy!
Hello,
I have a Lenovo A706. I mistakenly formatted the boot partition and now I cant even go to droidboot. Is there any hope that my phone can be recovered. I will be taking it to the service centre on Friday, but... can someone assure me that it will be repaired. I just brought it it's only seven days into the purchase and I don't even feel that it can be repaired. So, can someone say if it can be repaired by the service centre, or can I attempt a repair?
It would help if you detailed ALL the steps you took to arrive at this stage. And I mean ALL details.
You think when it's this important to you that you'd at least give some details, tools used, rooted, etc
CtrlAltDelIrl said:
It would help if you detailed ALL the steps you took to arrive at this stage. And I mean ALL details.
You think when it's this important to you that you'd at least give some details, tools used, rooted, etc
Click to expand...
Click to collapse
Yes sir,
Here's what I did:
I flashed my phone with CWM, then rooted my phone using the methods described in this thread: http://forum.xda-developers.com/showthread.php?t=2391801
Then I went into CWM using vol up+vol down+power and instead of erasing /cache I erased /sys_boot or something and then my phone doesn't even start into DroidBoot or CWM. Even if you tell me that the phone can be repaired by service centre I would be happy. Ask me if you want any more information!
simbaadw said:
Yes sir,
Here's what I did:
I flashed my phone with CWM, then rooted my phone using the methods described in this thread: http://forum.xda-developers.com/showthread.php?t=2391801
Then I went into CWM using vol up+vol down+power and instead of erasing /cache I erased /sys_boot or something and then my phone doesn't even start into DroidBoot or CWM. Even if you tell me that the phone can be repaired by service centre I would be happy. Ask me if you want any more information!
Click to expand...
Click to collapse
I don't have this phone but you should be able to repair this ok.
I'd start by trying to reflash CWM. Let us know how you get on with that first
Good luck!
CtrlAltDelIrl said:
I don't have this phone but you should be able to repair this ok.
I'd start by trying to reflash CWM. Let us know how you get on with that first
Good luck!
Click to expand...
Click to collapse
But I can't get into CWM or the recovery screen. So I am not able to flash anything and the only way to flash I think is through sd card and droidboot. So basically what I fear is I am not able to flash how will the sevice centre do it?
simbaadw said:
But I can't get into CWM or the recovery screen. So I am not able to flash anything and the only way to flash I think is through sd card and droidboot. So basically what I fear is I am not able to flash how will the sevice centre do it?
Click to expand...
Click to collapse
I mean that if I cannot get into recovery how will the service centre people do it?
Anyone having a Lenovo had this problem and was it resolved?
Erasing the bootloader is like breaking your device permanently unless you reflash the bootloader/ whole rom which comes with the bootloader or else it's gone.
Lim Wee Huat said:
Erasing the bootloader is like breaking your device permanently unless you reflash the bootloader/ whole rom which comes with the bootloader or else it's gone.
Click to expand...
Click to collapse
The service centre people will be able to do it? Because I am not able to enter into flash mode!
Someone may be able to help me or at least reassure me? :crying:
simbaadw said:
Hello,
I have a Lenovo A706. I mistakenly formatted the boot partition and now I cant even go to droidboot. Is there any hope that my phone can be recovered. I will be taking it to the service centre on Friday, but... can someone assure me that it will be repaired. I just brought it it's only seven days into the purchase and I don't even feel that it can be repaired. So, can someone say if it can be repaired by the service centre, or can I attempt a repair?
Click to expand...
Click to collapse
I don't see anyway to fix it... no bootloader=nothing. (U can go to the service centre and see what they do)
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Irwenzhao said:
I don't see anyway to fix it... no bootloader=nothing. (U can go to the service centre and see what they do)
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Click to expand...
Click to collapse
Oh! Definitely I will! So as I understand basically if there's any hope it's only the service centre. But, could you make up a tale that I can give to the service centre? Basically since everything has been erased, they won't be able to know I rooted.
simbaadw said:
Oh! Definitely I will! So as I understand basically if there's any hope it's only the service centre. But, could you make up a tale that I can give to the service centre? Basically since everything has been erased, they won't be able to know I rooted.
Click to expand...
Click to collapse
Tale? My only tale for u is: got a virus from a app online that it can whatsapp without internet but in the end it wiped my phone. (Act like a complete idiot about phones.)
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Irwenzhao said:
Tale? My only tale for u is: got a virus from a app online that it can whatsapp without internet but in the end it wiped my phone. (Act like a complete idiot about phones.)
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Click to expand...
Click to collapse
Oh! That's quite good. From my former experience with samsung phones, I have learned how to act stupid. :angel: But, I will be going on Friday, it's quite far from my house. Would it require the main board to be changed? Or, do they have something which can flash without the bootloader being there?
simbaadw said:
Oh! That's quite good. From my former experience with samsung phones, I have learned how to act stupid. :angel: But, I will be going on Friday, it's quite far from my house. Would it require the main board to be changed? Or, do they have something which can flash without the bootloader being there?
Click to expand...
Click to collapse
They may have to change the internal memory card. They should be replacing it with a card that has the bootloader on it.
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Irwenzhao said:
They may have to change the internal memory card. They should be replacing it with a card that has the bootloader on it.
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Click to expand...
Click to collapse
I hope they will do it for free. However device is not being detected by adb or else problem could be solved. And when connecting charger the soft keys flash!
simbaadw said:
I hope they will do it for free. However device is not being detected by adb or else problem could be solved. And when connecting charger the soft keys flash!
Click to expand...
Click to collapse
They should do it for free... they can't see if your phone is rooted or not. (Unless you're a complete nerd about phones)
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Irwenzhao said:
They should do it for free... they can't see if your phone is rooted or not. (Unless you're a complete nerd about phones)
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Click to expand...
Click to collapse
Thanks for the comforting news. Friday is not far anyway. Even if replacing the internal memory(worst case scenario-the main board) is not a choice, they might replace the phone.
Q&A for [GB] Advanced Xperia X10i ROM /FINAL/ [15.06.13]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GB] Advanced Xperia X10i ROM /FINAL/ [15.06.13]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
get into xrecovery problem!
Hi, I have a serious problem. Due to WIFI ERROR problem, I decide flash this rom again. I flashed AX_x10i_part_1.zip, AX_x10i_part_2.zip and all updates in one time. Now my phone wont boot up neither wont get into Xrecovery. How Can I do to restoure my phone, Please help!!!!!
Yuxing said:
Hi, I have a serious problem. Due to WIFI ERROR problem, I decide flash this rom again. I flashed AX_x10i_part_1.zip, AX_x10i_part_2.zip and all updates in one time. Now my phone wont boot up neither wont get into Xrecovery. How Can I do to restoure my phone, Please help!!!!!
Click to expand...
Click to collapse
Hi, this is a bug that appears only to a few phones, really rear. Make sure that you bootloader is unlocked before you do anything else. From here on there are two options: either preinstall the phone or flash new firmware (ftf). This will fix your phone. The only thing that you need to do after is to flash doomkernel that will give you recovery. If you still want to flash my rom you need to install wifi modules as the kernel has some problems with it. So the installation will look like this - flash part 1 then 2, the other fixes and finally flash the wifi modules. Peace
Denie46 said:
Hi, this is a bug that appears only to a few phones, really rear. Make sure that you bootloader is unlocked before you do anything else. From here on there are two options: either preinstall the phone or flash new firmware (ftf). This will fix your phone. The only thing that you need to do after is to flash doomkernel that will give you recovery. If you still want to flash my rom you need to install wifi modules as the kernel has some problems with it. So the installation will look like this - flash part 1 then 2, the other fixes and finally flash the wifi modules. Peace
Click to expand...
Click to collapse
Thanks for your replying Denie, My phone was unlocked, and it had feralab rom (I dont remember what name exactly was). Due to feralab was very slow so I decided to change ROM.
I installed xrecovery according to the right procedure, and followed the step that you mentioned in the beginning of this post to install advance xperia x10i rom, and it worked for me. I very liked this rom because it´s what I looking for, except the WIFI bug. Then I tryed to flash again but I forgot to do the first boot after flashing the first .zip. Finally, I couldnt bootup neither get into xrecovery again.
Can you send me some recovering procedure and link to download the new firmware? also please indicates the link to download the stable version of doomkernel.
Appreciated very much your help, thank you!
Tethering is not working
Yuxing said:
Thanks for your replying Denie, My phone was unlocked, and it had feralab rom (I dont remember what name exactly was). Due to feralab was very slow so I decided to change ROM.
I installed xrecovery according to the right procedure, and followed the step that you mentioned in the beginning of this post to install advance xperia x10i rom, and it worked for me. I very liked this rom because it´s what I looking for, except the WIFI bug. Then I tryed to flash again but I forgot to do the first boot after flashing the first .zip. Finally, I couldnt bootup neither get into xrecovery again.
Can you send me some recovering procedure and link to download the new firmware? also please indicates the link to download the stable version of doomkernel.
Appreciated very much your help, thank you!
Click to expand...
Click to collapse
I see, so here is what you have to do:
1. make sure you have flashtool as you're going to need it
2. download the two attached files, one is the kernel itself ( it is .ftf just unrar it) which you have to flash using flashtool, the other is to be flashed using xrecovery (wifi modules)
3. download the firmware from the link : http://www.mediafire.com/download/v...3.0.1.G.0.75_GLOBAL-GGL_GENERIC_1232-9897.rar it is a rar file, just pull the ftf file out from it.
4. start flashtool and flash the firmware, as you should know everyhing from your phone will be deleted
5. after the firmware is flashed, flash the kernel (the ftf file) the absolutely same way the firmware is flashed
6. start the phone, when you see the blue light on the phone start pressing the back button in order to get into xrecovery, from there flash the wifi modules and you're done. You'll have a stock rom with fully customized kernel so you can start from the beggining and flash any rom you wish.
NOTICE: the two attached files are property of DoomLord, thank him if you like the kernel
As for the tethering i'm aware that this bug can appear but usually hard reset or preinstalling the rom will clean it out.
Thanks for help!
Denie46 said:
I see, so here is what you have to do:
1. make sure you have flashtool as you're going to need it
2. download the two attached files, one is the kernel itself ( it is .ftf just unrar it) which you have to flash using flashtool, the other is to be flashed using xrecovery (wifi modules)
3. download the firmware from the link : it is a rar file, just pull the ftf file out from it.
4. start flashtool and flash the firmware, as you should know everyhing from your phone will be deleted
5. after the firmware is flashed, flash the kernel (the ftf file) the absolutely same way the firmware is flashed
6. start the phone, when you see the blue light on the phone start pressing the back button in order to get into xrecovery, from there flash the wifi modules and you're done. You'll have a stock rom with fully customized kernel so you can start from the beggining and flash any rom you wish.
NOTICE: the two attached files are property of DoomLord, thank him if you like the kernel
As for the tethering i'm aware that this bug can appear but usually hard reset or preinstalling the rom will clean it out.
Click to expand...
Click to collapse
Dear Denie,
Many thanks for your procedure, right now my phone is working at least. However after the step 4, I was trying to flash Doomkernel ftf file with flashtool and I found the following error message:
15/004/2014 15:04:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
15/004/2014 15:04:20 - ERROR - Error flashing. Aborted
What is the problem?
Appreciated very much your help thank you!
Yuxing said:
Dear Denie,
Many thanks for your procedure, right now my phone is working at least. However after the step 4, I was trying to flash Doomkernel ftf file with flashtool and I found the following error message:
15/004/2014 15:04:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
15/004/2014 15:04:20 - ERROR - Error flashing. Aborted
What is the problem?
Appreciated very much your help thank you!
Click to expand...
Click to collapse
Glad you made progress! Not really sure what actually causes this error, it may be flashtool or the ftf file. This had happened to me several times. Here's what to do:
when you choose the ftf file to flash check the NO FINAL VERIFICATION box, this should do. Keep in mind that this is risky because if you choose to flash ftf file that is not made for your phone, flashtool will not cancel the flashing operation and that will brick your phone. That's why make sure that you flash the right file , other than that this so called fix, is safe to use.
You better download the kernel from attachment again, sometimes files mess up when downloadin, no idea why. Be sure to notify me for any progress you do so that i can help.
Denie46 said:
Glad you made progress! Not really sure what actually causes this error, it may be flashtool or the ftf file. This had happened to me several times. Here's what to do:
when you choose the ftf file to flash check the NO FINAL VERIFICATION box, this should do. Keep in mind that this is risky because if you choose to flash ftf file that is not made for your phone, flashtool will not cancel the flashing operation and that will brick your phone. That's why make sure that you flash the right file , other than that this so called fix, is safe to use.
You better download the kernel from attachment again, sometimes files mess up when downloadin, no idea why. Be sure to notify me for any progress you do so that i can help.
Click to expand...
Click to collapse
Thanks for your soon replying!
I downloaded .ftf more than 2 time, but still no luck... Is it possible that I flash the kernel in recovery mode?
I checked my actual android kernel version: 2.6.29-00054-g5f01537 [email protected] #1.
Thank you again!
Please ,help me!
I installed this rom, but when I install it does not get the wifi.
so I tried to fix the first part I replaced all the files that had the wifi name and files from my old rom that took the wifi and got dressed.
But when I try to install the second part 2 of the wifi to catch.
Could someone help me?
since already, thank you.
Note: Ja tried installing kernel Doomlord alert by FlashTool, but I can not, error appears.
Yuxing said:
Thanks for your soon replying!
I downloaded .ftf more than 2 time, but still no luck... Is it possible that I flash the kernel in recovery mode?
I checked my actual android kernel version: 2.6.29-00054-g5f01537 [email protected] #1.
Thank you again!
Click to expand...
Click to collapse
Then the only way you can flash it is to check no final verification on flashtool, this should do, check the attached screenshot if you don't understand what to do.
hitireyes said:
I installed this rom, but when I install it does not get the wifi.
so I tried to fix the first part I replaced all the files that had the wifi name and files from my old rom that took the wifi and got dressed.
But when I try to install the second part 2 of the wifi to catch.
Could someone help me?
since already, thank you.
Note: Ja tried installing kernel Doomlord alert by FlashTool, but I can not, error appears.
Click to expand...
Click to collapse
You need the wifi modules for Doomlord's kernel in order for the wifi to work. check this post and download the attached files, only the attached files. Flash the kernel via flashtool, flash the modules via xrecovery. http://forum.xda-developers.com/showpost.php?p=56549160&postcount=6
I did not see the post above, but the problem and the same as mine.
That does not happen because the kernel version is not the X10i?
Error: h t t p : / / tinypic.com/r/2vsln2t/8
You could not upload the modules to your wifi?
Because no module that I downloaded works.
or could tell me what are the files of parte2 that interfere with wifi, so I delete.
Thank you in advance!
Denie46 said:
Then the only way you can flash it is to check no final verification on flashtool, this should do, check the attached screenshot if you don't understand what to do.
You need the wifi modules for Doomlord's kernel in order for the wifi to work. check this post and download the attached files, only the attached files. Flash the kernel via flashtool, flash the modules via xrecovery. http://forum.xda-developers.com/showpost.php?p=56549160&postcount=6
Click to expand...
Click to collapse
Dear Denie,
I tryed to activate the option you show me last time, however, still no luck... the error mesage still there. Any ideal?
thank you!
Yuxing said:
Dear Denie,
I tryed to activate the option you show me last time, however, still no luck... the error mesage still there. Any ideal?
thank you!
Click to expand...
Click to collapse
This is strange, i'll flash these files myself, another thing that comes to my mind is to look for a new version of flashtool or at least different version. Will write back as soon as i test the files.
Greetings!
Hi Denie46:
I have in my E10i , the ROM Android 4.1.2 JB Mini Project , which recently installed. The situation is behaving very slow sometimes and data use for navigation or some messaging by WHATTSAP not work.
I have decided to change ROM , and looking , I liked developed by you. I would like to know:
Is your ROM working yet ?
Data usage, is working?
Errors that are discussed in this post have been corrected ?
Can you provide me the link to download the appropriate kernel?
Can you tell me which files (.zip ) to install and in what order are they?
In advance , thank you for your attention.
Carlos RD
*********************************
Hola Denie46:
Tengo en mi E10i una ROM con Android 4.1.2 JB Mini Project, que instale recientemente. La situación es que se comporta en ocasiones muy lento y el uso de datos para navegar o mensajear por WHATTSAP no funciona.
Tengo decidido cambiar de ROM, y buscando, me ha gustado la desarrollada por Usted. Me gustaría saber lo siguiente:
Aún está vigente?
Funciona el uso de datos?
Los errores que se comentan en este post, han sido corregidos?
Me puede proporcionar el vínculo para descargar el kernel más adecuado?
Me puede decir cuáles son los archivos (.zip) a instalar y en qué orden?
De antemano, mil gracias por su atención.
Carlos RD.
salut wifi ne marche pas !!!!
salut wifi ne marche pas !!!!
good job
[GB] Advanced Xperia X10i ROM /FINAL/ [15.06.13]
Dear Denie
I have installed Part 1, part 2, n2-v3, last udate & second last update; All is working very fine but wifi is not working.
Then i installed wifi module "x10_gb_DooMKernel-v06-1113_wifi.zip "
but still wifi is showing "Error"
Plz help.
thanks in advance...
Dude, got a bug. Wi fi ain't turning on . Display an error
I have an Sky Devices Fuego 4.0d, one of the free ones from a cell phone carrier i got. I loaded the wrong rom and now phone wil not turn on. I have tried all the Nand roms I can find, none which work. Seems I can download nand roms to phone and it says pass using sp flash tool 3.1344 but phone when turned on will only flash white screen and camera flash will stay on solid. It seems I believe I have a 512 rom and 256 ram. I remember it said it only had a little over 200mb available space left on phone when first turned on. All the roms I found in sp tool say the phone is 4096 + 2056mb something like that. Tried emmc roms and will not load error out saying emmc chip not found only nand on phone. So what I think I need is a rom for the 512mb 256mb phone. I did take a readback of rom but it did not backup correctly and cannot reload to phone. Any help pls Thanks
Any one of you have a rom dump that can upload...
Any one of you have a rom dump that can upload here for my fuego 4.0d
Fuego has about 127 MB of free ROM Thanks
here
https://drive.google.com/drive/folders/0B6Qoy7ud5Vh1dVc5NmtuWkpZWVE
puntoazul said:
here
https://drive.google.com/drive/folders/0B6Qoy7ud5Vh1dVc5NmtuWkpZWVE
Click to expand...
Click to collapse
Good morning my friend. I've tryed to access the link, but google says the file is in recycle folder. Can you give me access to the file? Advanced thanks....
puntoazul said:
here
https://drive.google.com/drive/folders/0B6Qoy7ud5Vh1dVc5NmtuWkpZWVE
Click to expand...
Click to collapse
Buenos días hermano. Tendrás aún disponible esa ROM? Tengo un Sky 4.0D bricked y según he leído esa lo trae de la muerte.
Gracias de antemano.