Simply Honey 3.8 Revolution questions - Vibrant Q&A, Help & Troubleshooting

So I just flashed this ROM VIA Odin and I'm a bit worried.
Here is what I'm noticing:
When I first booted the phone everything was very glitchy looking which didn't worry me too much because it was the first boot. I rebooted it after 15min or so and is was still glitchy. It was just a bunch of different pixels. I went into my camera and it looked the exact same. Every once in a while I'll do something and then it will look really glitchy and not show anything, and then it will subside. Is anyone experiencing this? Was it a bad flash or is this normal with a freshly installed ROM?

Flash a gingerbread bootloader. That will fix the rainbow effect, as it is called on these boards.
http://forum.xda-developers.com/showthread.php?t=1117990

Dragonkai said:
So I just flashed this ROM VIA Odin and I'm a bit worried.
Here is what I'm noticing:
When I first booted the phone everything was very glitchy looking which didn't worry me too much because it was the first boot. I rebooted it after 15min or so and is was still glitchy. It was just a bunch of different pixels. I went into my camera and it looked the exact same. Every once in a while I'll do something and then it will look really glitchy and not show anything, and then it will subside. Is anyone experiencing this? Was it a bad flash or is this normal with a freshly installed ROM?
Click to expand...
Click to collapse
pepperbreath said:
Flash a gingerbread bootloader. That will fix the rainbow effect, as it is called on these boards.
http://forum.xda-developers.com/showthread.php?t=1117990
Click to expand...
Click to collapse
i was experiencing the same problems as you and most of them were solved by flashing the bootloader and the sgs2 camera needs to be flashed sepratly (i think)

Turn off the screen and turn it back again and it will all clear up.
Sent from my Transformer TF101 using Tapatalk

Hopefully they can start making flashing the bootloader flash by default. It would calm a lot of nerves.

i dont have rainbow apart from on boot up and i dont have the bootloaders

Related

Screen Issues After Flashing Rom via Odin

I attempted to flash Simple Honey 4.0 (was using Bionix prevoiusly) via Odin and once the phone rebooted I saw a strange screen issue after it rebooted.
Uploaded with ImageShack.us
The screen looks like this before the boot animation kicks in. It also appears like this if I attempt to go into CWM. It also happens with RevolutionRom. Other than that the roms "seem" to work fine but I can't navigate through CWM because the screen is wonky. I tried searching for this issue but I'm not even sure what search terms to use. Any help would be greatly appreciate.
Longsh0t said:
I attempted to flash Simple Honey 4.0 (was using Bionix prevoiusly) via Odin and once the phone rebooted I saw a strange screen issue after it rebooted.
Uploaded with ImageShack.us
The screen looks like this before the boot animation kicks in. It also appears like this if I attempt to go into CWM. It also happens with RevolutionRom. Other than that the roms "seem" to work fine but I can't navigate through CWM because the screen is wonky. I tried searching for this issue but I'm not even sure what search terms to use. Any help would be greatly appreciate.
Click to expand...
Click to collapse
U need to flash GB loader...here is a link http://forum.xda-developers.com/showthread.php?t=1117990
..good luck..
What he said
Can always use rom manager to flash things, I do and works fine for me
Sent from my SGH-T959 using XDA App
Longsh0t said:
I attempted to flash Simple Honey 4.0 (was using Bionix prevoiusly) via Odin and once the phone rebooted I saw a strange screen issue after it rebooted.
Uploaded with ImageShack.us
The screen looks like this before the boot animation kicks in. It also appears like this if I attempt to go into CWM. It also happens with RevolutionRom. Other than that the roms "seem" to work fine but I can't navigate through CWM because the screen is wonky. I tried searching for this issue but I'm not even sure what search terms to use. Any help would be greatly appreciate.
Click to expand...
Click to collapse
Yeah..use GB bootloaders...you will be fine.
Sent from my GT-I9000 using XDA App

[Q] sgs2 wont boot, just black screen

Flashed CM9 to experiment with it and see how it ran, prior to doing so made a backup of current setup (unnamed 2.2.1 w/ siyah kernel). After flashing to CM9 and playing around a bit i was going to revert back to my original setup. Tried flashing back and now I am unable to even get to CWM Recovery, or Download Mode. It will boot to the SGS2 screen and then just go black no matter what I do. It is still recognized in Odin so I was thinking I'm going to have to revert back to stock and just flash it back afterwards. Any ideas before I proceed?
AK40Nine said:
Flashed CM9 to experiment with it and see how it ran, prior to doing so made a backup of current setup (unnamed 2.2.1 w/ siyah kernel). After flashing to CM9 and playing around a bit i was going to revert back to my original setup. Tried flashing back and now I am unable to even get to CWM Recovery, or Download Mode. It will boot to the SGS2 screen and then just go black no matter what I do. It is still recognized in Odin so I was thinking I'm going to have to revert back to stock and just flash it back afterwards. Any ideas before I proceed?
Click to expand...
Click to collapse
Flash back to stock. Strange - you say you can't get into download mode, but Odin recognizes it?
Ok, finally got into DL mode and flashed a stock kernel from Entropy's post. Now i'm faced with it booting to the ATT splash screen and it just loops that screen infinitely. I'm still unable to access recovery mode to wipe data/cache or anything like that. This is becoming frustrating and I'm not quite able to wrap my head around why after flashing stock that I'm unable to boot into the phone beyond the splash screen. Am I using the wrong stock fw or something? Here's the link to the one i used.
http://forum.xda-developers.com/showthread.php?t=1286432
From my experience it's the wrong SPL/radio combo.
No matter what I do, I'm stuck up to that point.....I've tried a few different stock flash packages through Odin to no avail, same result every time. I know i'm probably doing something wrong or I'm missing something here, its not bricked I do know that so its not like i'm dead in the water here. Any ideas would be better than where I'm at currently.
BeenAndroidized said:
From my experience it's the wrong SPL/radio combo.
Click to expand...
Click to collapse
There is no SPL on the GSII, and a bad radio will only screw up calls/cell data.
To the OP - exactly how did you flash CM9? CWM or some kanged-up Odin build?
Through CWM, everything worked fine but when I was using CM9 my back button and serach button weren't working, probably erroneous to this situation. this is just messing me all up that I'm able to boot up til the splash and then it just loops it over and over, its making me think that the FW is having issues loading or something.
Problem solved finally. Something must have changed after this last flash attempt because now I was able to get into CWM of all things and recover my old backups. Nice little adventure that was. Thanks guys for the help!
Entropy512 said:
There is no SPL on the GSII, and a bad radio will only screw up calls/cell data.
To the OP - exactly how did you flash CM9? CWM or some kanged-up Odin build?
Click to expand...
Click to collapse
Understood. Coming from G1 I know it's different.
Sent from my SAMSUNG-SGH-I777 using XDA App

[Q] going back to stock from ICS (CM9) doesn't work

This is the second phone this has happened to, so I'm inclined to believe the problem resides in either the recovery package or there is no way to go from ICS to stock. Here's what I did and what the result was.
1. Initial phone was having hardware issues. I needed to return it to the warranty exchange depot, so I went to flash the no BL file that you can download from the recovery thread. Everything indicated that it flashed just fine. Phone reboots after the process and it gets the the "rethink Everything" splash screen and just sits there. After a minute, it reboots the phone again. Does the same thing. I take the phone in and get it swapped out under warranty.
2. Load CM9 on new phone and notice that GPS doesn't work. Everyone else says theirs works for the same nightly (5/22), so obviously it's my phone that's the problem or a bad flash. Flash a new nightly (5/29) and GPS still doesn't work. I want to flash back to stock to ensure that it's the hardware that's the problem, not the software. I download the most current recovery NO BL file from the recovery thread to ensure I have a good one. Flash it and the exact same thing happens. I get the splash screen then a reboot.
So now the question is, does flashing ICS permanently make it so you can't flash back? Does ICS work fine, but for some reason CM9 doesnt? Has anyone else done this without a problem? If so, what did you do because 2 phones 'bricking' like this isn't convinsing me that it can be done.
stalked_r/t said:
This is the second phone this has happened to, so I'm inclined to believe the problem resides in either the recovery package or there is no way to go from ICS to stock. Here's what I did and what the result was.
1. Initial phone was having hardware issues. I needed to return it to the warranty exchange depot, so I went to flash the no BL file that you can download from the recovery thread. Everything indicated that it flashed just fine. Phone reboots after the process and it gets the the "rethink Everything" splash screen and just sits there. After a minute, it reboots the phone again. Does the same thing. I take the phone in and get it swapped out under warranty.
2. Load CM9 on new phone and notice that GPS doesn't work. Everyone else says theirs works for the same nightly (5/22), so obviously it's my phone that's the problem or a bad flash. Flash a new nightly (5/29) and GPS still doesn't work. I want to flash back to stock to ensure that it's the hardware that's the problem, not the software. I download the most current recovery NO BL file from the recovery thread to ensure I have a good one. Flash it and the exact same thing happens. I get the splash screen then a reboot.
So now the question is, does flashing ICS permanently make it so you can't flash back? Does ICS work fine, but for some reason CM9 doesnt? Has anyone else done this without a problem? If so, what did you do because 2 phones 'bricking' like this isn't convinsing me that it can be done.
Click to expand...
Click to collapse
I know it works, I just used it the other day to go from ics to gb. Did you do a factory reset after flashing? Make sure you have your sdcard backed up before you use stock recovery.
Sent from my SGH-I777 using xda premium
nakedninja42 said:
I know it works, I just used it the other day to go from ics to gb. Did you do a factory reset after flashing? Make sure you have your sdcard backed up before you use stock recovery.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
by factory reset, you mean from the recovery console?
nakedninja42 said:
I know it works, I just used it the other day to go from ics to gb. Did you do a factory reset after flashing? Make sure you have your sdcard backed up before you use stock recovery.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Ok. You may now mock me. I did a factory reset and it worked. Feel like such a noob.
nothing to see here folks. Move along. Red, you can shut 'er down.
stalked_r/t said:
Ok. You may now mock me. I did a factory reset and it worked. Feel like such a noob.
nothing to see here folks. Move along. Red, you can shut 'er down.
Click to expand...
Click to collapse
No one would mock you over this. It is your experience.
Next time, when somebody hit the same or similar problem, do help them.
Friendly reminder.. If you can start your title with [q], it probably belongs in QA...
Mock mock mock!
Great to know, this may not be posted and is only available as "common knowledge". You sir have made this solution available to anyone searching for it. Thank you!
Clay
Sent from my SGH-I777 using XDA

Help, Vibrant does not boot

I've been using the euphoria ROM for a few months now with no incident. The phone has never given me problems of any sort, well the bad GPS, but that's a known issue.
Anyhow the other night went to bed without charging my phone. In the middle of the night I woke up and realized it was not charging, so I connected the charger and went back to bed. However by that time my phone has fully discharged so I got the battery graphics.
In the morning when I tried to turn the phone on I got the spiral boot icon and then a black screen.
I've tried to get the recovery mode but to no avail. I know the phone is somewhat working because i get the spiral boot animation and the charging graphics but i cannot get the phone to turn on. Did anybody know a fix, any advice will help.
Thanks in advance
=X=
I like your name, X (thats my nickname around here )
Anyways, when you plug it in, does the charging stuff come up? (if yes, how much battery do you suppose its at?)
Have you tried download mode? (take out battery, plug in USB, put battery back in while holding... I think its vol up and down + power, after it says VIBRANT let power go)
I'm not sure if your phone even goes that far.
Likewise I like your nickname.
My battery is close to 100%. I tried the sequence you mentioned with no luck. I get the same behavior, I get the spiral boot graphics and the phone good black. With the cable connected I get the charging battery graphics. The graphics does work properly. When the battery gets to 100% it vibrates too
=X=
Sent from my SGH-T889 using Tapatalk 2
=X= said:
Likewise I like your nickname.
My battery is close to 100%. I tried the sequence you mentioned with no luck. I get the same behavior, I get the spiral boot graphics and the phone good black. With the cable connected I get the charging battery graphics. The graphics does work properly. When the battery gets to 100% it vibrates too
=X=
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Just curious, what ROM/kernel were you on?
Also, by the spiral graphics are you talking about the bootanimation?
Are you on Froyo bootloaders or Gingerbread bootloaders?(if you don't know and have never messed with bootloaders its froyo)
I'm running Chimera v2.2. It's an ICS ROM made by team passion. The kernel is 3.1.10
Yes by the spiral I mean the boot animation. You only ever see it from a cold boot.
I don't know what boot loader I'm running.I think team passion is using the same one as Cyanogen. It's that common boot loader with a GUI.
=X= said:
I'm running Chimera v2.2. It's an ICS ROM made by team passion. The kernel is 3.1.10
Yes by the spiral I mean the boot animation. You only ever see it from a cold boot.
I don't know what boot loader I'm running.I think team passion is using the same one as Cyanogen. It's that common boot loader with a GUI.
Click to expand...
Click to collapse
Well the bootloader doesn't really use a GUI. You might be talking about the recovery, the one with "reboot system" and "install zip from sdcard"
What i was referring to was when i was installing the Chimera ROM I hadn't use a GUI app to install the ROM l. I thought the instructions mentioned it was installing a bootloader, but I could have miss read it.
Okay, X, I tried the steps again. I realize I did not follow all of your steps so I repeated them again. This time in tried the three finger salute with the USB plugged in and it worked. I get the recovery menu by choosing reboot it boots up properly.
However when I shutdown and turn on the phone I'm back to square one
=X=
=X= said:
What i was referring to was when i was installing the Chimera ROM I hadn't use a GUI app to install the ROM l. I thought the instructions mentioned it was installing a bootloader, but I could have miss read it.
Okay, X, I tried the steps again. I realize I did not follow all of your steps so I repeated them again. This time in tried the three finger salute with the USB plugged in and it worked. I get the recovery menu by choosing reboot it boots up properly.
However when I shutdown and turn on the phone I'm back to square one
=X=
Click to expand...
Click to collapse
Wait.. so when you tried my method your phone actually booted all the way up??
I was planning for you to go to Download mode and ODIN, but err..
Next time you go to recovery
*make sure you have a ROM in your sd card that is safe to flash, even if its chimera*
wipe data/factory reset
mount/storage > format system
flash your ROM in sd, then reboot
Yeah I wasn't expecting it to work. But now that that worked I am a bit nervous about installing a ROM incase the bootloader is corrupted.
Sent from my SGH-T889 using Tapatalk 2
=X= said:
Yeah I wasn't expecting it to work. But now that that worked I am a bit nervous about installing a ROM incase the bootloader is corrupted.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
:l, pretty sure you're confused, and the bootloader is not corrupted. If bootloader was corrupted, your phone would never start without a JTAG again.
Anyways, get into recovery, and flash chimera or any other safe rom you have, and see if it boots up. I think it may be something with Chimera.
xriderx66 said:
:l, pretty sure you're confused
Click to expand...
Click to collapse
Wouldn't be the first time
I'll reinstall the ROM thx
Sent from my SGH-T889 using Tapatalk 2
Just a suggestion, don't re-install Chimera... Or at the very least, don't use it as a daily driver. I stand by that for two reasons. For one, Chimera may have been the reason you got into this problem in the first place. The second reason being... Well... Er... Chimera v2.2 isn't the best ROM out there, and it's kinda dated... I'm sure there's others that would agree. I mean there's plenty of other ICS ROMs available that run much better. Jellybean ROMs have also reached a point of stability, so there's some good Jellybean flavored options to choose from as well. Personally, I'm running ParanoidAndroid (JB) and I'm lovin' it.
Just my two cents... But if you like Chimera, then stick with it. It's definitely a usable ROM.
Sent from my SGH-T959
I'm not dead set on Chimera, it was the best ROM at the time.
I'll give the ROM you mentioned a try,thanks
=X= said:
I'm not dead set on Chimera, it was the best ROM at the time.
I'll give the ROM you mentioned a try,thanks
Click to expand...
Click to collapse
Just curious, is your phone working fine now?
=X= said:
I'm not dead set on Chimera, it was the best ROM at the time.
I'll give the ROM you mentioned a try,thanks
Click to expand...
Click to collapse
Awesome. If you're like me -- a big fan of customization -- then I'm sure you'll love ParanoidAndroid (LINK).
Otherwise there are ten other JB ROMs to choose from, and about seventeen different ICS ROMs to choose from (excluding Chimera v2.2). Links to said ROMs can be found in the "ROM" section of the Vibrant Bible thread (LINK).
EDIT: Sorry if I kinda' veered this thread off topic... Have you gotten you're phone running fine now =X=?
xriderx66 said:
Just curious, is your phone working fine now?
Click to expand...
Click to collapse
No it did not work. I thought all was good. It seemed to work when I performed a soft shutdown. Then I tried a cold boot: shutdown the phone, pulled the battery and on startup the phone would not work.
N00B_IN_N33D said:
Awesome. If you're like me -- a big fan of customization -- then I'm sure you'll love ParanoidAndroid (LINK).
Otherwise there are ten other JB ROMs to choose from, and about seventeen different ICS ROMs to choose from (excluding Chimera v2.2). Links to said ROMs can be found in the "ROM" section of the Vibrant Bible thread (LINK).
EDIT: Sorry if I kinda' veered this thread off topic... Have you gotten you're phone running fine now =X=?
Click to expand...
Click to collapse
Awesome thanks for the links. It sounds like paranoid android will for my likes. I'm going to update my phone with that rom.
I'm still having problems with my phone however.
So I've upgraded my phone to the latest ParanoidAndroid but I'm still getting the same problem.
All works fine once it's running but I have to use the USB and three finger boot to get the phone to start, once I'm in the recovery mode selecting her restart launches the OS .
However trying to start the phone from a cold boot does not seem to work...any ideas anyone?
Sent from my SGH-T889 using Tapatalk 2
May be you need a new battery how long you have the current battery.
Sent from my SGH-T959 using xda app-developers app
It's probably not bootloader-related, but for what it's worth, froyo bootloaders don't work well with ICS Roms.
Chances are it's just a ROM issue, but if that fails just ODIN to default, re-root, install GB bootloaders, etc. (Basically, start over)
I have run many ICS and JB ROMs without issue running froyo boots. It was mostly GB ROMs that had issue and needs GB boots. I don't suspect that to be the issue however, it won't hurt to try it.
I am Jack's smirking revenge.

[Q] Kernel boot black screen

I tried flashing the Droid DNA Cubed Kernel 2.4.2, but forgot to flash the modules before rebooting. When the phone loaded up, all I got was a black screen with a title bar that would restart when I tried to unlock. I then restarted, flashed the modules, and I continued to get the same black screen. I even tried flashing back to the stock kernel with no luck. The only thing that fixed it was doing a factory reset. I had rooted stock with an unlocked bootloader. I didn't see mention of a required factory reset, so what went wrong? Thanks.
I'm not sure what went wrong, and factory reset is not required.
How did you flash the kernel?
I flashed the boot.img from fastboot, then installed the modules in TWRP after the blackscreen.
StormChaser46 said:
I flashed the boot.img from fastboot, then installed the modules in TWRP after the blackscreen.
Click to expand...
Click to collapse
That's normally what I do but I flash the modules before booting, which is how it should be done.
Exact same thing happened to me. I did the factory reset and started from the beginning again. It really scared me but now I have actual root access with superSU having no issues. So much happier now.
Anyways, the point is. If you mess that step up, just factory restore and do it again... The right way lol
Sent from my HTC6435LVW using xda app-developers app
Just flashed back to stock kernel from Flash Image GUI because I kept getting crashes/restarts on cubed, and no black screen this time. Not sure what the problem was, just hope it doesn't happen again lol.
StormChaser46 said:
Just flashed back to stock kernel from Flash Image GUI because I kept getting crashes/restarts on cubed, and no black screen this time. Not sure what the problem was, just hope it doesn't happen again lol.
Click to expand...
Click to collapse
So you did a factory reset and tried cubed again but still didn't work?
It did work after a factory reset, but I got crashes/reboots out of nowhere. I saw other people were also reporting occasional crashing, so I'll stick with stock til it's a little more stable.
Understandable, I get a random hangups every other day or so and it restarts... But the pro's outweigh the cons imo. But I agree with you as well .
Coming from a DX, I got used to random reboots here and there after rooting hahah
Sent from my HTC6435LVW using xda app-developers app

Categories

Resources