i need to unroot my device to get it replaced under warranty as i am facing terrible heating and battery problems.
i have read a lot and tried all methods i could find... but i am unable to remove the Superuser and CWM apps.
i rooted with Chainfire's method.
PLease Help urgently.
flash a stock rom and you'll be unrooted , if the apps still there do factory reset
http://forum.xda-developers.com/showthread.php?t=1075278
nechmadi said:
flash a stock rom and you'll be unrooted , if the apps still there do factory reset
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
i have read that already and tried to flash the stock firmware back using odin.. but no luck.
flash rom?? please elaborate...!!
the firmware i flashed was like 7 mb.
i would not want to factory reset my phone as the problem i am facing might stop for a day or two, cause thats what happened when i did it earlier. and i am going to get the phone replaced today itself.
vinaymieux said:
i have read that already and tried to flash the stock firmware back using odin.. but no luck.
flash rom?? please elaborate...!!
the firmware i flashed was like 7 mb.
i would not want to factory reset my phone as the problem i am facing might stop for a day or two, cause thats what happened when i did it earlier. and i am going to get the phone replaced today itself.
Click to expand...
Click to collapse
Look for intratech's thread in development. He even gives directions.
Sent from my GT-P1000 using XDA Premium App
Firmwares are well over 200mb.To flash a new rom go to samfirmware.com choose the original firmware you had or one similar and then extract the folder downloaded. Put the phone.in download mode. For PDA use.the file with PDA in etc. Click repartition and use ext4 pit file.
vinaymieux said:
i have read that already and tried to flash the stock firmware back using odin.. but no luck.
flash rom?? please elaborate...!!
the firmware i flashed was like 7 mb.
i would not want to factory reset my phone as the problem i am facing might stop for a day or two, cause thats what happened when i did it earlier. and i am going to get the phone replaced today itself.
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
OMG OMG FIRE FIRE!!!!
First, stop panicking, and post in Q&A where this belongs.
You need to do a full ODIN flash of a stock ROM. You would do this by going to Intratech's thread, and selecting the suitable firmware for your region and carrier/unbranded device.
Unzip the self extracting exe etc, and you will have the stock ROM file. ODIN it as a PDA.
This won't factory reset the phone, but if it won't boot, that might give you another example of something wrong with it... You can factory reset via stock recovery, if needed, by holding volume up + home + power, and choosing to reset.
FIRST AND FOREMOST...SUCCESS ... UNROOTED!
I WAS FLASHING THE FIRMWARE (7MB) NOT THE ROM (200MB)
AND NOW DONE!!
pulser_g2 said:
OMG OMG FIRE FIRE!!!!
First, stop panicking, and post in Q&A where this belongs.
Click to expand...
Click to collapse
:-D , tell me about it...lol..sorry for posting here i thought it belonged here due to rooting.
THANKS... EVERYONE! NOW I JUST HOPE THEY REPLACE MY PHONE EASILY.. ALSO HOPE THE NEW ONE DOESN'T COME OUT TO BE SAME!!
uhgyjguyhihiuiojm
bboylost said:
uhgyjguyhihiuiojm
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA Premium App
just have a look on android development and find the flashing stock firmwares thread
Let us know if they replace your phone as I assume your binary count would be at least 1?
Got the phone replaced yesterday! No problems til now, fingers crossed.
Thanks for the help guys!
Sent from my GT-I9100 using XDA Premium App
Related
hey guys, before you say this is a repost ive had a look and was unable to find someone who done the same thing as me...
i have a brand new galaxy s2,
i tried to root it, but some how i stuffed it up and the phone got stuck on the boot screen after the root, i tried to reinstall the kernel but without being able to get into the phone i didnt know which kernel i needed, i DONT have clockworkmod installed so i couldnt boot via that either, so i tried downloading the stock kernel for Telstra my phone provider, i tried installing that, but now instead of being stuck on the screen with the boot logo and a yellow triangle, im stuck on the screen that has a little image of a phone and a computer and an orange triangle between then with a ! in it. any assistance in this would be greatly appreciated
slippery_gypsy said:
hey guys, before you say this is a repost ive had a look and was unable to find someone who done the same thing as me...
i have a brand new galaxy s2,
i tried to root it, but some how i stuffed it up and the phone got stuck on the boot screen after the root, i tried to reinstall the kernel but without being able to get into the phone i didnt know which kernel i needed, i DONT have clockworkmod installed so i couldnt boot via that either, so i tried downloading the stock kernel for Telstra my phone provider, i tried installing that, but now instead of being stuck on the screen with the boot logo and a yellow triangle, im stuck on the screen that has a little image of a phone and a computer and an orange triangle between then with a ! in it. any assistance in this would be greatly appreciated
Click to expand...
Click to collapse
Hey,
first question:
You are able to get in download mode? (volume down + home button + power button)
If yes, be cool
So when u are able, flash a stock Rom with "re-partition".
This means also that you must have a stock Rom with 3 files (or sometimes more), but not the one .tar file.
If you've done this, your phone should work normal.
Then try to root again with the right "cf-root" for the android version, you flashed.
Good luck!
CHEERS
Sent from my GT-I9100 using XDA App
Hannibal226 said:
Hey,
first question:
You are able to get in download mode? (volume down + home button + power button)
If yes, be cool
So when u are able, flash a stock Rom with "re-partition".
This means also that you must have a stock Rom with 3 files (or sometimes more), but not the one .tar file.
If you've done this, your phone should work normal.
Then try to root again with the right "cf-root" for the android version, you flashed.
Good luck!
CHEERS
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
wow while i was waiting the 5 minutes to do another pist, i downloaded the jpkh1 rom and installed that... mate your my hero, it worked !!! now to follow some guides and and properly root this phone with the right rom
So you're stuck on the boot screen, and you haven't been able to find any other posts to help you out.... except the HUGE pinned one on the top of the forums
[READ THIS] Got a Boot Loop? Don't post a New Thread! ... yeah, okay, makes sense!
thanks thesaw. but the ones i were able to find assumed that people had ClockWorkMod which i didnt have
slippery_gypsy said:
wow while i was waiting the 5 minutes to do another pist, i downloaded the jpkh1 rom and installed that... mate your my hero, it worked !!! now to follow some guides and and properly root this phone with the right rom
Click to expand...
Click to collapse
Gr8 to hear
CHEERS
Sent from my GT-I9100 using XDA App
Hannibal226 said:
Hey,
first question:
You are able to get in download mode? (volume down + home button + power button)
If yes, be cool
So when u are able, flash a stock Rom with "re-partition".
This means also that you must have a stock Rom with 3 files (or sometimes more), but not the one .tar file.
If you've done this, your phone should work normal.
Then try to root again with the right "cf-root" for the android version, you flashed.
Good luck!
CHEERS
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Just out of curiosity: I always read, you should never select "re-partition".
Why do you suggest this here right now for a StockRom?
Thanks in advance.
System of a pWne!^ said:
Just out of curiosity: I always read, you should never select "re-partition".
Why do you suggest this here right now for a StockRom?
Thanks in advance.
Click to expand...
Click to collapse
Never when it's just a one part .tar file!
If you have three or more you can choose for odin (phone,modem,csc)
then u can select it
CHEERS
Sent from my GT-I9100 using XDA App
What I have read it only works if pit file is available, but even then re-partition should not be used. And a one-file tar generally contains the same files (phone,modem,csc) as the three-file-combo.
That's why I'm so confused.
Im honestly glad you guys know what your talking about
Sent from my GT-I9100 using xda premium
System of a pWne!^ said:
What I have read it only works if pit file is available, but even then re-partition should not be used. And a one-file tar generally contains the same files (phone,modem,csc) as the three-file-combo.
That's why I'm so confused.
Click to expand...
Click to collapse
The .pit file is only needed by three-file-combo.
Then you can check also the repartition.
If you have one file .tar, the .pit-file is senseless and never should check repartition.
Sure in one file you have nearly the same "files" like in three, but in three-file they can be written separatly on right partition.
Mates don't get me wrong but just accept it
I'm not a dev or scripter but but flashed a lot.
Never bricked my phone but often hanging in bootloop and so on.
And like you see the way with re-partition can help.
I Never flashed a stock Rom since I had my SGS II, but like I said I'm flashing a lot and I had the SGS before, too
Hope all question are answered.
If not pls ask devs for more info.
But that's the general things I can tell you
CHEERS
Sent from my GT-I9100 using XDA App
Hannibal226 said:
Never when it's just a one part .tar file!
If you have three or more you can choose for odin (phone,modem,csc)
then u can select it
CHEERS
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Wrong, you can use it with both single tarball archive or with the 3 component tarball. You don't need to repartition the device unless you need to change the partition layout for whatever reason or you've damaged your partition layout.
Intratech said:
Wrong, you can use it with both single tarball archive or with the 3 component tarball. You don't need to repartition the device unless you need to change the partition layout for whatever reason or you've damaged your partition layout.
Click to expand...
Click to collapse
1) Right, he damaged it so he needed it.
2) No you shouldn't use it by one file flash!
Read threads and experiences from users which have probs after flashing like this if at all possible to flash.
But however I don't wanna say anybody how to flash.
That's my and also a lot of other user experience
CHEERS
Sent from my GT-I9100 using XDA App
I was trying to update my phone from gingerbread 2.3.3 to ice cream sandwich. but for some reason it did not go well, so i am all stuck. I tried so many things people suggested in here. Last thing i tried is to flash it with gingerbread firmware as explained in adroiddevicesdotcom. sorry its not letting me paste the full link of any third party website.
now i can see startup screen where it reaches up to big "S" sign with samsung galaxy 2 written at the bottom but its just looping at same screen.
Could anybody please suggest me what else i can try to install its original OS again.
Thanks,
If you need any other info please let me know
Use odin
I have tried odin to flash gingerbread firmware but still did't help, could you please send me the link where i can download the required files
i know how to use odin just looking for right file
Thanks for your reply
bindudhindsa said:
I have tried odin to flash gingerbread firmware but still did't help, could you please send me the link where i can download the required files
i know how to use odin just looking for right file
Thanks for your reply
Click to expand...
Click to collapse
You can find firmware here:www.sammobile.com
*coughs* Or funnily enough, you can find firmware here and here
Why are you even messing with ICS if you reallly have no idea what you are doing? Didn't you read?
Simple solution to boot loop is a factory reset. I have done this numerous times after flashing a new ROM. Works all the time.
Sent from my ThinkPad Tablet using XDA App
mattyh77 said:
Simple solution to boot loop is a factory reset. I have done this numerous times after flashing a new ROM. Works all the time.
Sent from my ThinkPad Tablet using XDA App
Click to expand...
Click to collapse
Works for many rom flashes and is always worth trying some just wont boot first time .
jje
I will try the firmware you guys provided and let you know. Any special instructions before i try this please let me know
I have already tried factory reset so many times but for some reason factory reset is not working.
Thanks a lot to all of you guys..
So you have a bootloop.... did you try the bootloop thread? lol
Want to make my SGS2 so that i can send it to Samsung
hello my problem is that i need a firmware and kernel version that i can send my SGS2 back to Samsung.
i want to set my SGS2 back to the moment when i bought it.
can me anyone send links etc. whit the firmware version and the other stuff(tutorials...)
thx
afura86 said:
hello my problem is that i need a firmware and kernel version that i can send my SGS2 back to Samsung.
i want to set my SGS2 back to the moment when i bought it.
can me anyone send links etc. whit the firmware version and the other stuff(tutorials...)
flash stock rom via Odin and how on earth can we tell what your firmware version is you pick one .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
it is my first flash in my life and on my SGS2 sorry.
hello as other members suggested i tried both files in the link thru odin to flash my samsung galaxy 2 . my network is bell canada so i installed both .tar files from the link. As per odin instructions i added first file in PDA section and second file in Phone section. but after pressing start its giving me fail error in odin after complete process. please suggest if i can try anything else
Sent from my GT-I9100M using XDA App
bindudhindsa said:
hello as other members suggested i tried both files in the link thru odin to flash my samsung galaxy 2 . my network is bell canada so i installed both .tar files from the link. As per odin instructions i added first file in PDA section and second file in Phone section. but after pressing start its giving me fail error in odin after complete process. please suggest if i can try anything else
Sent from my GT-I9100M using XDA App
Click to expand...
Click to collapse
Was the com box yellow and does ur pc recognise ur phone?
Sent from my GT-I9100
Yes the ComBOx turned yellow when i connected my phone with odin and yes my pc recognize my samsung , i was able to do it full process but only at end it showed FAIL.
Got the Galaxy S3 on the 3 network in the UK, all was fine & dandy then found out about how the phone was updated & basically 3 sit twiddling their thumbs on it. Went looking for a solution, found a nice simple flash the phone with Odin, use proper Samsung firmware, thought that will do the trick for me.
Unfortunately I did exactly as I was told (didn't go down the root, well, route as there were too many options and I was lost as to wether I was using the right stuff) People swore by the flash to samsung firmware, did that last night, was perfect. Only thing left was the change csc thing, to select BTU but the option wasnt there...was told to download another firmware.......the phone returned with a "unfortunately, the process android.acore has stopped" message, was told to to a reset.......then got "unfortunately, messaging has stopped". Have flashed a few times now to no avail, I can no longer text, is my phone basically broken beyond repair?
Not ruined, but it sounds like you have clobbered some system files. Read up on rooting. Hopefully you can Root and then install a custom recovery like CWM then install a custom ROM.
It would have been better to have made a backup via recovery before you started flashing stuff.
Flash stock ROM and start again
Sent from my GT-I9300 using xda app-developers app
Or even factory reset .
But its a bad flash probably could be a corrupt download or wrong firmware .
jje
seems like u didnt follow the instructions and u could have even bricked your device all that i can say is factory reset or flash a new rom
SilvFlashProd said:
Not ruined, but it sounds like you have clobbered some system files. Read up on rooting. Hopefully you can Root and then install a custom recovery like CWM then install a custom ROM.
It would have been better to have made a backup via recovery before you started flashing stuff.
Click to expand...
Click to collapse
(s)he is having issues just fixing a stock rom misflash and you recommend a custom ROM? Even root was too complicated
I've flashed past phones to death and even still following instructions exactly, they don't always work as they should. Yeah they have cool features and yeah me or you can probably manage to fix any issues they throw up, but they are definitely not for everyone.
Sent from my GT-I9300 using xda app-developers app
bkr32 said:
seems like u didnt follow the instructions and u could have even bricked your device all that i can say is factory reset or flash a new rom
Click to expand...
Click to collapse
Bull****...his problems have nothing to do with a brick. Don't scare him.
i'd defo try a factory, cache and dalvik reset first before flashing again, you'l loose all your data but it may fix the problems you are experiencing.. Boot into recovery mode to do that.
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong? I tried following the rooting stuff but found so many variations & in my head (technology challenged when it comes to this) it was all going over my head. I did do the factory reset & reflash with a stock software (the latest I believe) but I don't know if it is a network thing which knackerec me, in CSC I have sales code saying H3G with no options to select BTU. If I post a screenshot of my settings (about device) would that help someone steer me in the right direction as a possible starting point.
My phone appears to be no longer 3 branded, but it should be locked to the 3 network in the uk.
I had the same issue with my Three branded phone. What i did was flash the rom with the PDA button ticked in Odin and then flashed it again with the same file but ticked the CSC icon instead of the PDA and it worked and then let me select BTU from the menu. Give it a try and report back, i'm 99% sure it'll work.
BTW you'll lose the HD voice by flashing it. I still havent found and easy way to get it back working.
bonzai1888 said:
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong?
No very unlikely i still use 1.30
I tried following the rooting stuff but found so many variations & in my head
One method works and is easy .
http://forum.xda-developers.com/showthread.php?t=1695238
Stock UK
http://forum.xda-developers.com/showthread.php?t=1646610
jje
Click to expand...
Click to collapse
JJEgan said:
bonzai1888 said:
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong?
No very unlikely i still use 1.30
I tried following the rooting stuff but found so many variations & in my head
One method works and is easy .
http://forum.xda-developers.com/showthread.php?t=1695238
Stock UK
http://forum.xda-developers.com/showthread.php?t=1646610
jje
Click to expand...
Click to collapse
The link for the stock you posted is what I used....didn't root as I said, but appeared to work perfectly. Then I lost access to kies & was told I needed to use csc to tick the BTU option & that would work, except I didnt & still don't have that option. Was given another link to apparently the same stock that had "multi csc options" & that when I got the Samsung acore error & I did a factory reset after about 30 minutes of trying to get into the options, then the messaging stopped working & I found out how to do te factory reset using te vol button home power thing. Is there a specific 3 firmware where I can get my phone branded again & take it from there?
Click to expand...
Click to collapse
djstevie said:
I had the same issue with my Three branded phone. What i did was flash the rom with the PDA button ticked in Odin and then flashed it again with the same file but ticked the CSC icon instead of the PDA and it worked and then let me select BTU from the menu. Give it a try and report back, i'm 99% sure it'll work.
BTW you'll lose the HD voice by flashing it. I still havent found and easy way to get it back working.
Click to expand...
Click to collapse
If I try this, what Rom did you use, was it the one in link after you?
What do you want .
Wait for updates via Kies and OTA or join XDA and flash Stock Samsung rom as released ???
Me no Kies and no OTA on my phone
Stock LG9 or leaked Jelly Bean .
jje
JJEgan said:
What do you want .
Wait for updates via Kies and OTA or join XDA and flash Stock Samsung rom as released ???
Me no Kies and no OTA on my phone
Stock LG9 or leaked Jelly Bean .
jje
Click to expand...
Click to collapse
I am happy flashing on release, please understand this is all new. If losing kies is not an issue coz I can just flash then cool. I thought kies was an essential part of the updating. I can use my phone fine just now (using go SMS Pro) but would like it back to fully working phone which would be sweet.
Nothing good is wrong with your phone. It's not even a brick yet. Flash a cwm recovery and then re trying using check rom.
Sent from my GT-I9300 using Tapatalk 2
None of these guys no what there talking about. You've bricked your phone and you won't be able to fix it. Best thing to do is cut your loss and sell it. I'll be generous and give you £50 pounds for it. That's right a fresh £50 note right now, hard cash delivered right to your door step, no questions asked!
Honestly though try flashing the original 3 firmware, it should be in the firmware thread I believe.
P.S You've not bricked your phone, no where near it so don't worry about it.
Sent from my GT-I9300 using xda premium
avocco said:
None of these guys no what there talking about. You've bricked your phone and you won't be able to fix it. Best thing to do is cut your loss and sell it. I'll be generous and give you £50 pounds for it. That's right a fresh £50 note right now, hard cash delivered right to your door step, no questions asked!
Honestly though try flashing the original 3 firmware, it should be in the firmware thread I believe.
P.S You've not bricked your phone, no where near it so don't worry about it.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks...I was giving up again to be honest as once again I was left not knowing what to do. I thought this would be the easiest place to ask but it was ending up in riddles, which is why I gave up on rooting it in the first place.
bonzai1888 said:
Thanks...I was giving up again to be honest as once again I was left not knowing what to do. I thought this would be the easiest place to ask but it was ending up in riddles, which is why I gave up on rooting it in the first place.
Click to expand...
Click to collapse
I'm on 3 UK same happened to me when I unbranded. Don't panic your phone is fine. Turn off phone then hold power + home + volume up. Let go when you see the Android man. Wipe factory reset and dalvik cache you will lose everything. Then reboot. Don't bother letting it boot back up, just hold power + home + volume down. Then flash unbranded rom via odin. Once done and booted type *#272*yourimei# and you should now have option of btu.
Sent from my GT-I9300 using xda premium
bonzai1888 said:
If I try this, what Rom did you use, was it the one in link after you?
Click to expand...
Click to collapse
Was the latest UK unbranded rom in the first page.
I have the international edition of the S3 that a was messing around with, and I ended up installing some rom and now I can't even get into recovery. I've searched around and tried multiple methods of fixing it. The only thing I can access is download mode. Can anyone help?
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
speedman2202 said:
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
Click to expand...
Click to collapse
Do you know where I could find instructions on how to flash a PIT?
this is file come from sammobile.com website
providing u the right PIT file with flasher
http://www.mediafire.com/?ddfpfkk2pb8326k
connect ur mobile , open odin program and then press on PIT button and navigate PIT files then (as i think) choose the latest PIT file with name i9300 (ur mobile Model) and latest date and then hit start ..... good luck but i recommend u send it to ur Samsung repair center if warranty cover
good luck
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
Exactly this^^^^....pit file flashing is an absolute last resort, not a first solution
did you tried flashing 4.0.4 stock rom with odin?
same thing happened to me 2 weeks ago, flashing 4.0.4 and after that flashing 4.1.2 fixed it.
try to do not mess with pit especially if you didn't backup your efs folder. it is not needed.
redstreetwalker said:
it is not needed.
Click to expand...
Click to collapse
moreover, it can render your phone irreparable
Ganjasaur said:
now I can't even get into recovery. The only thing I can access is download mode.
Click to expand...
Click to collapse
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
I've already tried to flash a stock firmware, but I still couldn't get it into recovery. I'm not sure if it was the right one though. I have a regular unbranded SIII, is there a specific firmware I should flash?
speedman2202 said:
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Click to expand...
Click to collapse
okay? the first thing to do here is just flash a stock ROM, no need for pit files
Mine was stuck before than samsung logo, on the model number screen. Almost 1 second or less after opening the device.
Then i flashed 4.0.4 and magically it opened without any loop or something. Its useless to flash 4.1.2 or any other jb stock rom, for some reason it seems not fixing the loop issue.
Again, there is no problem related with pit files.
Sent from my GT-I9300 using xda premium
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Ganjasaur said:
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Click to expand...
Click to collapse
Follow the steps to root and flash your custom ROM again as if you just got your phone. The same thing happened to my T999, and it took me 3 tries doing this to finally get back into Recovery.
try to flash in odin stock rom then root use cwm then try to go to recovery..
My cousin's having the same exact issue and we've been unable to find the proper rom. Can anyone please tell me where to get one? I've downloaded some "international" ones but when i try to upload it it keeps telling me failed, i've tried at least 4 or 5 different roms.
ANY help would be greatly appreciated!!
Phone is:
GT-i9300
using it in the US with StraightTalk in the US (been working like a charm for ~6 months, all of a suddent when into this weird limp mode)
Phone was running jellybean 4.1.1 (through kies) and not rooted
Try several times before giving up. Sometimes it works after when the device feels that you've had enough stress and fear.
I mean the problem is common but it's solved in different ways or different repeats.
But it seems that your problem is a software problem that can be solved.
Glebun said:
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
Click to expand...
Click to collapse
Sorry for the misunderstanding, i mean flashing jb was useless for me in that situation. Thanks for the correction
Sent from my GT-I9300 using xda premium
ok so i was trying to flash a new modem to my note and accidentally flashed the wrong file now it wont boot but odin still recognizes it. im in need of a stock odin tar to flash via odin to see if it will fix my brick but all the links im finding on the forum are dead.
if anyone has a copy of ANY ROM stock, non stock, rooted, unrooted whatever i would really appreciate the upload!!!!
thanks in advance
rookie407
Rookie407 said:
ok so i was trying to flash a new modem to my note and accidentally flashed the wrong file now it wont boot but odin still recognizes it. im in need of a stock odin tar to flash via odin to see if it will fix my brick but all the links im finding on the forum are dead.
if anyone has a copy of ANY ROM stock, non stock, rooted, unrooted whatever i would really appreciate the upload!!!!
thanks in advance
rookie407
Click to expand...
Click to collapse
On my phone at work and dont have file with me, check the Super Everything thread or run a search. Your not the first to need this.
Need to be careful
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
captemo said:
On my phone at work and dont have file with me, check the Super Everything thread or run a search. Your not the first to need this.
Need to be careful
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
if your refering to the "all in one stock root rom" thread i've checked that already and all the att links are dead.
Just plug it into KIES and restore to stock, root then install your custom rom.
Rookie407 said:
if your refering to the "all in one stock root rom" thread i've checked that already and all the att links are dead.
Click to expand...
Click to collapse
in General Forums / Super Everything Thread
you did not list your carrier or device in your post, but there is a whole list of options here. I have myself scanned through list and yes am aware many of links are dead, yet this was the 2nd one I checked.
if this is for your device and what you are looking for then you are ready to go.
here is the thread containing the file, first link is up
http://forum.xda-developers.com/showthread.php?t=2261598
if not, check the last post in this thread. you will find a link provided from "developweb", see if that is what you are looking for, be sure to hit his thanks button. I am not going to send one of my files, again simply, because you have not told anyone device or carrier. you have already flashed wrong file once and I don't know how, but I don't want to be responsible for anyone bricking their device.
you have been a member long enough to know what information folks need and long enough to know to read. if you can provide this information, then maybe I can help you further if needed.
good luck and keep us posted
jayinc11 said:
Just plug it into KIES and restore to stock, root then install your custom rom.
Click to expand...
Click to collapse
only problem with that is that the device wont turn on and KIES doesnt recognize it. just tryed to flash a recovery via odin and it failed also... guess im stuck with yet another paper weight.
Rookie407 said:
only problem with that is that the device wont turn on and KIES doesnt recognize it. just tryed to flash a recovery via odin and it failed also... guess im stuck with yet another paper weight.
Click to expand...
Click to collapse
Got you. Well there's a bunch of modems here but you will have to decide your own course. I can't offer any advice on them. Good luck!
Version: 4.1.2
Date: 2013-03-31
PDA: I717UCMD3
CSC: I717ATTMD3
PHONE:I717UCMD3
URL: http://terafile.co/71641c73615e/I717UCMD3_I717ATTMD3_ATT.zip