Got the Galaxy S3 on the 3 network in the UK, all was fine & dandy then found out about how the phone was updated & basically 3 sit twiddling their thumbs on it. Went looking for a solution, found a nice simple flash the phone with Odin, use proper Samsung firmware, thought that will do the trick for me.
Unfortunately I did exactly as I was told (didn't go down the root, well, route as there were too many options and I was lost as to wether I was using the right stuff) People swore by the flash to samsung firmware, did that last night, was perfect. Only thing left was the change csc thing, to select BTU but the option wasnt there...was told to download another firmware.......the phone returned with a "unfortunately, the process android.acore has stopped" message, was told to to a reset.......then got "unfortunately, messaging has stopped". Have flashed a few times now to no avail, I can no longer text, is my phone basically broken beyond repair?
Not ruined, but it sounds like you have clobbered some system files. Read up on rooting. Hopefully you can Root and then install a custom recovery like CWM then install a custom ROM.
It would have been better to have made a backup via recovery before you started flashing stuff.
Flash stock ROM and start again
Sent from my GT-I9300 using xda app-developers app
Or even factory reset .
But its a bad flash probably could be a corrupt download or wrong firmware .
jje
seems like u didnt follow the instructions and u could have even bricked your device all that i can say is factory reset or flash a new rom
SilvFlashProd said:
Not ruined, but it sounds like you have clobbered some system files. Read up on rooting. Hopefully you can Root and then install a custom recovery like CWM then install a custom ROM.
It would have been better to have made a backup via recovery before you started flashing stuff.
Click to expand...
Click to collapse
(s)he is having issues just fixing a stock rom misflash and you recommend a custom ROM? Even root was too complicated
I've flashed past phones to death and even still following instructions exactly, they don't always work as they should. Yeah they have cool features and yeah me or you can probably manage to fix any issues they throw up, but they are definitely not for everyone.
Sent from my GT-I9300 using xda app-developers app
bkr32 said:
seems like u didnt follow the instructions and u could have even bricked your device all that i can say is factory reset or flash a new rom
Click to expand...
Click to collapse
Bull****...his problems have nothing to do with a brick. Don't scare him.
i'd defo try a factory, cache and dalvik reset first before flashing again, you'l loose all your data but it may fix the problems you are experiencing.. Boot into recovery mode to do that.
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong? I tried following the rooting stuff but found so many variations & in my head (technology challenged when it comes to this) it was all going over my head. I did do the factory reset & reflash with a stock software (the latest I believe) but I don't know if it is a network thing which knackerec me, in CSC I have sales code saying H3G with no options to select BTU. If I post a screenshot of my settings (about device) would that help someone steer me in the right direction as a possible starting point.
My phone appears to be no longer 3 branded, but it should be locked to the 3 network in the uk.
I had the same issue with my Three branded phone. What i did was flash the rom with the PDA button ticked in Odin and then flashed it again with the same file but ticked the CSC icon instead of the PDA and it worked and then let me select BTU from the menu. Give it a try and report back, i'm 99% sure it'll work.
BTW you'll lose the HD voice by flashing it. I still havent found and easy way to get it back working.
bonzai1888 said:
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong?
No very unlikely i still use 1.30
I tried following the rooting stuff but found so many variations & in my head
One method works and is easy .
http://forum.xda-developers.com/showthread.php?t=1695238
Stock UK
http://forum.xda-developers.com/showthread.php?t=1646610
jje
Click to expand...
Click to collapse
JJEgan said:
bonzai1888 said:
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong?
No very unlikely i still use 1.30
I tried following the rooting stuff but found so many variations & in my head
One method works and is easy .
http://forum.xda-developers.com/showthread.php?t=1695238
Stock UK
http://forum.xda-developers.com/showthread.php?t=1646610
jje
Click to expand...
Click to collapse
The link for the stock you posted is what I used....didn't root as I said, but appeared to work perfectly. Then I lost access to kies & was told I needed to use csc to tick the BTU option & that would work, except I didnt & still don't have that option. Was given another link to apparently the same stock that had "multi csc options" & that when I got the Samsung acore error & I did a factory reset after about 30 minutes of trying to get into the options, then the messaging stopped working & I found out how to do te factory reset using te vol button home power thing. Is there a specific 3 firmware where I can get my phone branded again & take it from there?
Click to expand...
Click to collapse
djstevie said:
I had the same issue with my Three branded phone. What i did was flash the rom with the PDA button ticked in Odin and then flashed it again with the same file but ticked the CSC icon instead of the PDA and it worked and then let me select BTU from the menu. Give it a try and report back, i'm 99% sure it'll work.
BTW you'll lose the HD voice by flashing it. I still havent found and easy way to get it back working.
Click to expand...
Click to collapse
If I try this, what Rom did you use, was it the one in link after you?
What do you want .
Wait for updates via Kies and OTA or join XDA and flash Stock Samsung rom as released ???
Me no Kies and no OTA on my phone
Stock LG9 or leaked Jelly Bean .
jje
JJEgan said:
What do you want .
Wait for updates via Kies and OTA or join XDA and flash Stock Samsung rom as released ???
Me no Kies and no OTA on my phone
Stock LG9 or leaked Jelly Bean .
jje
Click to expand...
Click to collapse
I am happy flashing on release, please understand this is all new. If losing kies is not an issue coz I can just flash then cool. I thought kies was an essential part of the updating. I can use my phone fine just now (using go SMS Pro) but would like it back to fully working phone which would be sweet.
Nothing good is wrong with your phone. It's not even a brick yet. Flash a cwm recovery and then re trying using check rom.
Sent from my GT-I9300 using Tapatalk 2
None of these guys no what there talking about. You've bricked your phone and you won't be able to fix it. Best thing to do is cut your loss and sell it. I'll be generous and give you £50 pounds for it. That's right a fresh £50 note right now, hard cash delivered right to your door step, no questions asked!
Honestly though try flashing the original 3 firmware, it should be in the firmware thread I believe.
P.S You've not bricked your phone, no where near it so don't worry about it.
Sent from my GT-I9300 using xda premium
avocco said:
None of these guys no what there talking about. You've bricked your phone and you won't be able to fix it. Best thing to do is cut your loss and sell it. I'll be generous and give you £50 pounds for it. That's right a fresh £50 note right now, hard cash delivered right to your door step, no questions asked!
Honestly though try flashing the original 3 firmware, it should be in the firmware thread I believe.
P.S You've not bricked your phone, no where near it so don't worry about it.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks...I was giving up again to be honest as once again I was left not knowing what to do. I thought this would be the easiest place to ask but it was ending up in riddles, which is why I gave up on rooting it in the first place.
bonzai1888 said:
Thanks...I was giving up again to be honest as once again I was left not knowing what to do. I thought this would be the easiest place to ask but it was ending up in riddles, which is why I gave up on rooting it in the first place.
Click to expand...
Click to collapse
I'm on 3 UK same happened to me when I unbranded. Don't panic your phone is fine. Turn off phone then hold power + home + volume up. Let go when you see the Android man. Wipe factory reset and dalvik cache you will lose everything. Then reboot. Don't bother letting it boot back up, just hold power + home + volume down. Then flash unbranded rom via odin. Once done and booted type *#272*yourimei# and you should now have option of btu.
Sent from my GT-I9300 using xda premium
bonzai1888 said:
If I try this, what Rom did you use, was it the one in link after you?
Click to expand...
Click to collapse
Was the latest UK unbranded rom in the first page.
Related
I Downloaded and installed the ICS update last night and have been living in hell since. It doesn't have the soft buttons it is supposed to, so navigating through everything is an absolute nightmare! I want to go back to my standard rooted phone. But I have followed MANY, MANY guides, and it will not work. I have downloaded 10 different ROMS and FIRMWARES today and Flashed OVER AND OVER. I am completely stuck and NEED help please.
I have used Recovery to try and install new Roms, Used Odin as well, and I get problems EVERY time. It will reboot, load, and as soon as the "Touch the Android to Begin" logo comes up, It starts having process failures popping up over and over, preventing me from being able to do anything. Forcing me to reflash to ICS again.
Can someone please explain the process to take it back to stock so I can re-root it?
Did you wipe everything when you installed the roms? Data, cache, Dalvik?
Find stock roms here for odin:
http://forum.xda-developers.com/showthread.php?t=1075278
Just make sure to download and install the correct rom depending on which SGSII you have.
xfile102 said:
I Downloaded and installed the ICS update last night and have been living in hell since. It doesn't have the soft buttons it is supposed to, so navigating through everything is an absolute nightmare! I want to go back to my standard rooted phone. But I have followed MANY, MANY guides, and it will not work. I have downloaded 10 different ROMS and FIRMWARES today and Flashed OVER AND OVER. I am completely stuck and NEED help please.
I have used Recovery to try and install new Roms, Used Odin as well, and I get problems EVERY time. It will reboot, load, and as soon as the "Touch the Android to Begin" logo comes up, It starts having process failures popping up over and over, preventing me from being able to do anything. Forcing me to reflash to ICS again.
Can someone please explain the process to take it back to stock so I can re-root it?
Click to expand...
Click to collapse
first install stock rom from this link
http://forum.xda-developers.com/showthread.php?t=1075278
then download this rom (i think this is best ICS Rom) and install it with CMW(you should copy the rom inside your internal SD) then full wipe your phone and install rom .
http://forum.xda-developers.com/showthread.php?t=1451346
it isn't hard to push thanks button
All you need to do, if having FCs is perform a factory reset (via recovery)...
Sent from my GT-I9100 using Tapatalk
xfile102 said:
I Downloaded and installed the ICS update last night and have been living in hell since. It doesn't have the soft buttons it is supposed to, so navigating through everything is an absolute nightmare! I want to go back to my standard rooted phone. But I have followed MANY, MANY guides, and it will not work. I have downloaded 10 different ROMS and FIRMWARES today and Flashed OVER AND OVER. I am completely stuck and NEED help please.
I have used Recovery to try and install new Roms, Used Odin as well, and I get problems EVERY time. It will reboot, load, and as soon as the "Touch the Android to Begin" logo comes up, It starts having process failures popping up over and over, preventing me from being able to do anything. Forcing me to reflash to ICS again.
Can someone please explain the process to take it back to stock so I can re-root it?
Click to expand...
Click to collapse
Why don't people search...?
http://forum.xda-developers.com/showthread.php?t=1449771
Kaze105 said:
Did you wipe everything when you installed the roms? Data, cache, Dalvik?
Find stock roms here for odin:
http://forum.xda-developers.com/showthread.php?t=1075278
Just make sure to download and install the correct rom depending on which SGSII you have.
Click to expand...
Click to collapse
@Kaze & @Medhi, I went to the Link you provide above, which is INCREDIBLY well laid out and helppful, If I lived anywhere in the world except The US. There arent any Firmwares provided for North America there. Any other suggestions? That was a great resource if they only had some North America Help
xfile102 said:
@Kaze & @Medhi, I went to the Link you provide above, which is INCREDIBLY well laid out and helppful, If I lived anywhere in the world except The US. There arent any Firmwares provided for North America there. Any other suggestions? That was a great resource if they only had some North America Help
Click to expand...
Click to collapse
Use any version... It is universal! Stop complaining and use search MORE OFTEN!
Sent from my GT-I9100 using xda premium
Phistachio said:
Why don't people search...?
http://forum.xda-developers.com/showthread.php?t=1449771
Click to expand...
Click to collapse
Phistachio!!! Thank You. And to reply, I most certainly DID search, MANY, MANY topics. I thought my phone was bricked but came across SOOOO many threads saying if your phone would load into a ROM it is most certainly NOT BRICKED, leading a n00b such as myself to believe I needed to search for a different issue. Always helps to know what you are looking FOR when searching. This looks awesome. I will try it right away and get back to you with an update as to whether this fixes it.
Phistachio said:
Why don't people search...?
http://forum.xda-developers.com/showthread.php?t=1449771
Click to expand...
Click to collapse
Phistachio - I followed your link, but when you get to the following step:
4) Download the necessary files : the Kernel, the Recovery Package and the Bootloader (it's the old one, which you can easily use a USB JIG to reset the counter and remove the yellow triangle when having a custom kernel or OS),
The link provided for the Recover Package is a Hotfile.com link, and the Archive that it downloads is PASSWORD PROTECTED, and there is no mention of a password anywhere on the page you provided, nor on the hotfile.com page.
Any Ideas?
zylor said:
Use any version... It is universal! Stop complaining and use search MORE OFTEN!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Zylor, Thanks for the overt Negativity in your post. I was making sure we were clear, not complaining. I wasn't aware that telling someone that they have provided a great resource was "complaining". And when the OP AND the page he sends you to VERY CLEARLY say ONLY USE THE CORRECT VERSION, far be it for me to magically know that I can grab any random version from CHINA or wherever and have it work on my US ATT GS2. Sorry for trying to follow instructions and avoid a potential brick. But thanks for being a hateful Troll.
xfile102 said:
Phistachio - I followed your link, but when you get to the following step:
4) Download the necessary files : the Kernel, the Recovery Package and the Bootloader (it's the old one, which you can easily use a USB JIG to reset the counter and remove the yellow triangle when having a custom kernel or OS),
The link provided for the Recover Package is a Hotfile.com link, and the Archive that it downloads is PASSWORD PROTECTED, and there is no mention of a password anywhere on the page you provided, nor on the hotfile.com page.
Any Ideas?
Click to expand...
Click to collapse
Password is probably samfirmware.com or [email protected]
Are you sure you've got an I9100 and not an I9100G or whatever?
Sent from my Samsung Galaxy S II using Tapatalk.
mbutandola said:
Are you sure you've got an I9100 and not an I9100G or whatever?
Click to expand...
Click to collapse
Actually, you may be able to help me there. Most site reference only the I9100 or the I9100G. My Phone Hardware has a sticker saying SGH-I777, but the boot screen has always said GT-I9100. So which would it be?
xfile102 said:
Actually, you may be able to help me there. Most site reference only the I9100 or the I9100G. My Phone Hardware has a sticker saying SGH-I777, but the boot screen has always said GT-I9100. So which would it be?
Click to expand...
Click to collapse
You have the AT&T device.
Your correct forum is at http://forum.xda-developers.com/forumdisplay.php?f=1301
Not sure from the details supplied, but have youtried AT&T specific Roms?
Over at this site http://galaxys2root.com/category/att-galaxy-s2-roms/ (Thanks to Max) they have quite a few to try. And make sure you do a complete wipe before you flash one of them ie, factory reset, clear cache then advanced delvik cache and battery stats and then install from zip.
Hope this helps.
I followed all the instructions, and my phone rebooted into the ROM. But it is not stock. My Back and Search buttons still do not work, and the Recovery is 3e, so I cant use the Recovery function because my model (US AT&T) doesn't have the OK button. Since I cant get it to take a screenshot, i'll list the info below:
Android Version: 2.3.5
Baseband Version: I9100XXKI3
Kernel Version: 2.6.35.7-I9100XXKI3-CL577579 [email protected] #2
Build Number: GINGERBREAD.XXKI3
I just want to get it back to AT&T Stock, or a WORKING 2.3.6. But as it stands, It doesnt work properly, because my Back Button does not work, nor my Search button.
All Guidance is appreciated. I want to get back to the Stock Bootloader, not the ICS Bootloader
P.S. - I DID SEARCH FOR THIS INFO. When I did, I came up with threads like:
http://forum.xda-developers.com/showthread.php?t=1317372
- Turns out it only works on the CHINESE SGS2.
Bobgnarley said:
Not sure from the details supplied, but have youtried AT&T specific Roms?
Over at this site http://galaxys2root.com/category/att-galaxy-s2-roms/ (Thanks to Max) they have quite a few to try. And make sure you do a complete wipe before you flash one of them ie, factory reset, clear cache then advanced delvik cache and battery stats and then install from zip
Click to expand...
Click to collapse
Bob!! Thats exactly what I want to do. But I cant, because the Recovery installed on my phone wont let me do anything because I dont have the OK button on my phone. I tried the power button and everything else, I cannot make selections in Recovery 3e, so the only way to get out of it is to pull the battery.
Xfile if your sticker says at&t sgh-i777 theres a complete forum dedicated to that model here in xda. Better pop in there and find more help.
They also have model specific roms over there and surely they should work. Wannit to post the link but not sure how to from the xda app yet.
Good luck.
Sent from my GT-I9100 using xda premium
xfile102 said:
Phistachio - I followed your link, but when you get to the following step:
4) Download the necessary files : the Kernel, the Recovery Package and the Bootloader (it's the old one, which you can easily use a USB JIG to reset the counter and remove the yellow triangle when having a custom kernel or OS),
The link provided for the Recover Package is a Hotfile.com link, and the Archive that it downloads is PASSWORD PROTECTED, and there is no mention of a password anywhere on the page you provided, nor on the hotfile.com page.
Any Ideas?
Click to expand...
Click to collapse
No problem I'm glad I can help
The password is samfirmware.com
BTW, to replace the ICS bootloader flash the BL in the thread
Also, I would like to apologize for my first reply (the "Why didn't you search" one)... It was a bit rude...
Phistachio said:
No problem I'm glad I can help
The password is samfirmware.com
BTW, to replace the ICS bootloader flash the BL in the thread
Also, I would like to apologize for my first reply (the "Why didn't you search" one)... It was a bit rude...
Click to expand...
Click to collapse
No Sweat. I'm just trying to follow instructions and get this fixed ASAP. I did flash the bootloader mentioned, with no errors in Odin, but it still loads with the new galaxy S logo animation instead of the old GT-I9100 Logo with the Yellow Exclamation point. AND, I still have no use of the Back and Search buttons, functionality that is removed in the new ICS. What am I doing wrong? I cannot seem to get my phone back to Stock Android.
Hi,
Just "upgraded" from an old Cyanogen ICS (didn't use the phone for more then a month) to the LPQ Samsung ICS through Odin.
I did wipe cache and dalvik.
Samsung ICS seems to work just fine, however the camera fails. Flashed back a recent Cyanogen rom (cm-9-20120318) and also here the Camera fails.
Camera worked fine when still on unrooted GB 2.3.6 last time I checked about 2 months ago, and I haven't dropped the device afaik.
My guess is that while flashing roms about 2 months ago I did something wrong somewhere... Maybe overwrote the camera firmware with something stupid?
Is there a way to get the camera to work again?
Thanks for listening..
Im not that technically minded but isnt there a firmware update for the camera on the "samsung apps"..er..bit of the phone? maybe installing that will fix it?
Thanks, installed it (on ICS) ...
But the update program crashes...
I think I am going to follow the bricked phone procedure....
Unless someone has a better idea
Well, unfortunately I can't find a original rom package with pit file and the lot (seems to me this comes most close to a very fresh install)
Thought to do this:
http://forum.xda-developers.com/showthread.php?t=1449771
But the rom has been deleted from hotfile
Do not use PIT file .
#
jje
Did you try to flash the kernel cf kernel again?
Sent from my GT-I9100 using XDA
JJEgan said:
Do not use PIT file .
#
jje
Click to expand...
Click to collapse
Why not ?, this seems the way to unbrick a phone, and the instructions to use the pit file are all over the net... I was thinking this could also unbrick my camera as part of the unbricking process...???
DaKiii said:
Did you try to flash the kernel cf kernel again?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I flashed the root kernel, didn't help (if that's what you meant)
Gede said:
Why not ?, this seems the way to unbrick a phone, and the instructions to use the pit file are all over the net...
Often copied from other sites i prefer to use the FAQS and Guides on this site rather than bits and pieces from all over the place .
I would .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Click to expand...
Click to collapse
JJEgan said:
Gede said:
Why not ?, this seems the way to unbrick a phone, and the instructions to use the pit file are all over the net...
Click to expand...
Click to collapse
Often copied from other sites i prefer to use the FAQS and Guides on this site rather than bits and pieces from all over the place .
Click to expand...
Click to collapse
Yes, so do I. And actually the instruction to flash with a pit file is from a guide from this site:
http://forum.xda-developers.com/showthread.php?t=1449771
JJEgan said:
I would .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem . etc
Click to expand...
Click to collapse
Like I said, I am afraid I messed something up while flashing some time ago. (got a Gnote, so didn't bother so much) Flashing a recovery won't hurt (if I can find the damned I9100XXKI3.rar with the pit and such) and I already flashed an official fw, with clean caches and so.
Do note that bricking and firmware aren't even remotely connected. What you're describing sounds like a camera firmware problem and flashing won't help you.
Call *#34971539# and check your Phone/Cam Fw version. What do you see?
Use a stock rom for your phone and try to flash new firmware via Samsung apps or take it to a service center.
bpivk said:
Do note that bricking and firmware aren't even remotely connected. What you're describing sounds like a camera firmware problem and flashing won't help you.
Click to expand...
Click to collapse
Ok, Got back to official 2.3.5 (flashed with pit), Camera still doesn't work "Camera Failed".
bpivk said:
Call *#34971539# and check your Phone/Cam Fw version. What do you see?
Click to expand...
Click to collapse
The Factory Test Program force closes. No info, just a crash
bpivk said:
Use a stock rom for your phone and try to flash new firmware via Samsung apps or take it to a service center.
Click to expand...
Click to collapse
Installed 2.3.5, and the Camera firmware update program. This program also force closes.
Now, I'll try to flash kernel and bootloader, as in the recovery post.
Flashed Kernel and Bootloader as in the recovery post, did not help. still "camera failed", *#34971539# still crashes Factory info, Camera FW Update program still force closes.
What more can I do to get the camera working again??
(I must have messed up something while flashing some time ago, I remember also seeing a "dead" android character with his belly open while rebooting in recovery few times...)
Oh, btw, even with non rooted official firmware and kernels, Kies says it cannot update the firmware (2.3.5 and 4.0.3)
Is this because my flash counter is at 4 now, or is there another reason?
Sent from my GT-N7000 using xda premium
Please anyone?
How can I get my S2 in original state again with working camera, please?
What can I flash?
Sent from my GT-N7000 using xda premium
I have the same problem, and bad news is that it is not the software issue, it is a problem with hardware. I just discovered (just now ) when i press the phone hard (around simcard area) the camera works fine! Hope this is just loose connection. Going to get my screwdrivers right now...
My E4GT has been acting identical!! I also tried reinstalling EVERYTHING. After reading your posts I starting pressing around on the back of my phone with the back cover off and the camera starting working. Thanks for pointing me in the right direction...
same problem
Black screen again
Same problem again!
My phone accidentally spent some time in a bucket full of water (over a minute!). Took me almost an hour to get it working, but unfortunately the camera wasn't working again (black screen). As I have had some bad experience with the camera before, disassembled my phone, disconnected the camera, carefully cleaned everything and I put it all back together. Camera working again!
The whole process is very easy and took me about 20 minutes!
Same problem!
My phone after falling down the camera stopped working (black screen). I changed the camera did not work.
can you help me?
thanks
Hi, I just followed the instructions here - http://forum.xda-developers.com/showpost.php?p=32235061&postcount=1
and now i've got no signal, no baseband no imei on my phone. i didn't backup either which is my big mistake.
anyway to fix it?
i have the i9305 LTE
tauran said:
Hi, I just followed the instructions here - http://forum.xda-developers.com/showpost.php?p=32235061&postcount=1
and now i've got no signal, no baseband no imei on my phone. i didn't backup either which is my big mistake.
anyway to fix it?
i have the i9305 LTE
Click to expand...
Click to collapse
Have you tried flashing a stock firmware using Odin?
Nope, I wasn't sure what to do, didn't want to make it worst so i came here for help.
Should I do that?
Can i use one of these roms? http://forum.xda-developers.com/showthread.php?t=1935570
how do i know if i should use odex or de-odex?
tauran said:
Nope, I wasn't sure what to do, didn't want to make it worst so i came here for help.
Should I do that?
Can i use one of these roms? http://forum.xda-developers.com/showthread.php?t=1935570
how do i know if i should use odex or de-odex?
Click to expand...
Click to collapse
With the state of your phone now, if you were to reflash a rom between the two, you would have to flash the odex version because it will have everything stock, while the other deodexed one might have one or two things taken out, I believe.
How on earth do these things happen if you followed the steps, i dont get it
btemtd said:
How on earth do these things happen if you followed the steps, i dont get it
Click to expand...
Click to collapse
Could be a bug somewhere, development in this device is still very small and new.
@OP, reflash stock as suggested, might be lucky and get your details back.
i just flashed a stock rom, no luck.
still no imei. is there anything else I could do?
Not sure if this is possible but use someones efs img and inject your own imei inside it. i wonder if this would work
Sent from my GT-I9305 using xda app-developers app
I tried doing that on my old device with no luck, but it may work for him.
I had the exact same issue, unfortunately I had no success, I ended up sending my phone back to Telstra and getting a replacement
I have the i9305T from Telstra and I made the mistake of trying to install CF-Root 6.4 for the standard i9300. Once I did that I soft bricked the phone. I have been able to download the Telstra ROM from SamFirmware and install it and be able to get the ROM up and running again. I have lost the ability to connect to the mobile network. I can still use the phone to full capacity and even connect to wifi. I haven't be able to work out a way to repair the mobile network connection.
Can you suggest any ideas?
Guys I have thought about something go into the Hidden Menu *#197328640# Option 5 says EFS sync... Click on this and see what happens, there are also other options all over the place go through the whole menu and see if you can manage to do something and let us know
btemtd said:
Guys I have thought about something go into the Hidden Menu *#197328640# Option 5 says EFS sync... Click on this and see what happens, there are also other options all over the place go through the whole menu and see if you can manage to do something and let us know
Click to expand...
Click to collapse
i can get into said menu but just see a black screen with no options available.
tauran said:
i can get into said menu but just see a black screen with no options available.
Click to expand...
Click to collapse
Flash a stock rom back through Odin . Go on to Sammobile and download official rom and if it still no reception then try what I said
btemtd said:
Flash a stock rom back through Odin . Go on to Sammobile and download official rom and if it still no reception then try what I said
Click to expand...
Click to collapse
cool, i'm just waiting to get hold of original Everything Everywhere UK ROM before I do that.
OK, i've triangleaway'd my flash counter.
so now my phone in download mode reads:
Odin mode
Product Name: GT-I9305
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
Now, it says samsung official as i used a foreign (to me) firmware from sammobile, i still want to change this to the everything everywhere ROM.
Why does system status still say custom? is it because i still have root? how do i remove it after i install the EE ROM?
The EE rom shouldn't add to the flash counter so i'll be OK to remove root then install it.
tauran said:
OK, i've triangleaway'd my flash counter.
so now my phone in download mode reads:
Odin mode
Product Name: GT-I9305
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
Now, it says samsung official as i used a foreign (to me) firmware from sammobile, i still want to change this to the everything everywhere ROM.
Why does system status still say custom? is it because i still have root? how do i remove it after i install the EE ROM?
The EE rom shouldn't add to the flash counter so i'll be OK to remove root then install it.
Click to expand...
Click to collapse
I have the rooted stock rom flashed on my phone and the system status says official.
Try flashing the rom from this thread, then you can delete the super user apk.
AFuuuuuuuuuuuuuuuuuuuuu
was pwning some angry birds and phone froze restarted and now i got no data. no imei or imei sv
but i do have my efs backed up but for the life of me i can not get adb efs pro to install :/ so i can copy it back over. is there a way to do it via CWM?
or some other method of backing up my efs to the phone.
Whattttt ??? How why what the last thing you did how does that happen by itself
Sent from my GT-I9305 using xda app-developers app
btemtd said:
Whattttt ??? How why what the last thing you did how does that happen by itself
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
i got NFI i was laughing at peeps that had the issue cause i didnt and bam playing games with the missus and it messed up. last thing i installed was my custom SystemUI.apk with minor icon changes. besides that just everyday gaming.
anyhoo im off to bed i need sleep sort this efs stuff out in the morn.
also i read there is a simler problem with a motorola phone that says ....... low battery cant develop or such its a simler issue that samsung phones face! with the IMEI affected tho.
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
kakadu44 said:
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
Click to expand...
Click to collapse
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
SGH-i717 Home Keys not working
Bubbajoe40356 said:
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
Click to expand...
Click to collapse
Thanx for you reply..I did however flash stock 2.3.4 from oden..I deleted everything in recovery then went to oden and flashed the stock rom..Should i unroot/unbrick flash from oden?
That article about returning to original settings in Kies seems to make sense except for the fact that i cannot get Kies to recognise the phone...
Are we talking about Software ou Hardare issue in your opinion?
Cheers
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
SGH-i717 Home Keys not working
Bubbajoe40356 said:
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
kakadu44 said:
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
Click to expand...
Click to collapse
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Bubbajoe40356 said:
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
kakadu44 said:
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
Click to expand...
Click to collapse
Please can you advise me what is the best way to WIPE my phone of ALL my info to start over again, just like a complete wipe on my laptop..cheers
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
sp73smith said:
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
Click to expand...
Click to collapse
Hi there thanx for your answer..I have not tried at that site..this program will do what? COMPLETELY wipe my phone??cheers
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
SGH-i717 HOME keys are not working...
sp73smith said:
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yep i used it..very good..But my original and main problem..Continues..NONE of my HOME keys are working..I fear that it is a Hardware issue with the SGH-i717..I guess i have to take it to Samsung for repair..Until someone else can give me a solution..I have tried everything and nothing has worked..No HOME keys..Cheers
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
SGH-i717 HOME keys are not working...
Hammerfest said:
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
Click to expand...
Click to collapse
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
kakadu44 said:
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
Click to expand...
Click to collapse
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
SGH-i717 HOME keys are not working...
Hammerfest said:
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
Click to expand...
Click to collapse
READY AND WAITING..THANX
Okay thank you for reply..I am ready to go with the install/flash...
When you get time to direct me to the correct ROM and Kernel i would be much obliged..In the meantime enjoy your rest..Cheers Mick
I'm having real issues trying to get a stock ROM on my Virgin Mobile S3 (GT-I9300) and I'm hoping you guys can help me. I've looked absolutely everywhere for a solution but so far nothing has worked.
OK so a little history about the problem:
Using phone as normal, and then randomly turns off. Turn it back on and I get the two Samsung splash screens loop booting constantly. I boot into recovery mode and do a factory reset - same problem. Clear the cache - same problem. Send phone back to Virgin and they tell me I've rooted and installed a custom ROM which I absolutely have not but they have a screenshot with the custom counter showing '1'.
I've no idea how this is possible, but I would have remembered if I'd installed a custom ROM. Anyway, they send it back because I'm not going to fork out £100 for them to flash it.
So...lots of research later, I download the latest Odin (3.09), find the most likely stock ROM that will work with my phone (Carrier is Virgin Mobile UK). I find this ROM on SamMobile: I9300XXUGMK6_I9300OXAGMK6_BTU. Cannot for the life of me find an actual Virgin rom so this apparently should be fine as it's a generic EU build.
Fine, so I apply it using the AP selection in Odin, connect phone, it goes through and applies fine "PASS" etc.. and phone reboots automatically.
Now, it just sits at the Samsung splash screen (the static white text) and doesn't go any further. I've left it upwards of 10 minutes but no dice. So look online and find threads that suggest booting to recovery and doing a factory reset will do the trick. So try that (Power+volume up+home) and same problem - static splash screen. Balls.
So now I don't know what to do. I either need to try an actual Virgin ROM which doesn't seem to exist(?!) or my phone is truely bricked and I'll finally have a good reason to destroy the thing.
Can anyone let me know what the next steps should be? I would be eternally grateful.
Thanks in advance.
I found the s3 to be a pain when doing a reset. Basically do it twice. Wipe, flash, wipe then boot. As far as I know btu is correct but virmin mobile used to rent their airspace from tmobile who are now half ee. Such a minefield..
Sent from my GT-I9300 using Tapatalk
shivadow said:
I found the s3 to be a pain when doing a reset. Basically do it twice. Wipe, flash, wipe then boot. As far as I know btu is correct but virmin mobile used to rent their airspace from tmobile who are now half ee. Such a minefield..
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
When you say 'wipe' do you mean factory reset via recovery mode? Because I'm not able to access that. All I can get to is Download Manager to use with Odin...
I thought you said you could access recovery and you had cleared cache. In that case you are buggered. If it goes through the flashing phase and reboots but you still cannot get into recovery then you have 3 options..
1. Flash another rom but no lower than 4.3. Carrier shouldn't matter.
2. Full on flash with pit file (dangerous and can perma brick).
3. Return the phone under warranty and state that the flash counter also clocks official flashes too, samsung should know this as they make the phone.. staff need training if they say otherwise.
Sent from my GT-I9300 using Tapatalk
Try the rescue firmware from general forum, follow the instructions exactly as it includes a pit.
It sounds like nand failure, so it's possible that you won't be able to fix it.
Sent from my GT-I9300 using Tapatalk
I thought you said you could access recovery and you had cleared cache.
Click to expand...
Click to collapse
Apologies for not being clearer, before sending it back to Virgin for the warranty repair I could access the recovery mode fine, when I got it back I couldn't - whether that was caused by the flashing of the firmware or something Virgin did I don't know unfortunately.
Try the rescue firmware from general forum, follow the instructions exactly as it includes a pit.
Click to expand...
Click to collapse
Thanks for the tip - I've flashed the stock recovery and I can now get into recovery mode! Looks slightly different but I can now access the factory reset/wipe cache options so that's some improvement.
I'm just downloading the stock international ROM as per this thread http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847 but it's going to take a few hours. Thanks so much for your advice so far i'll report back once the download completes.
No joy
I can however get into download mode and recovery mode now. Is there anything else I can try? Is it possible I can get a custom recovery image on there and flash it with something other than the stock rom?
I've got a feeling you're correct and it could be a hardware fault. Virgin say I can pay £100 to get it fixed, if they have to replace the entire phone that would prove it wasn't 'tampering' that caused it so I could potentially get my money back I guess, if I complained. I think that might be my only option now.
Ok I just booted into recovery mode and I was greeted with this error:
Any ideas what this could mean?
crispin85 said:
Ok I just booted into recovery mode and I was greeted with this error:
Any ideas what this could mean?
Click to expand...
Click to collapse
I say this to people who have this sort of problem but I mention the dreaded word and they tend to ignore it but will tell you what to try anyway.
Install Kies 3 for android 4.3 (there I said it Kies) on the top menu bar click Tools then Firmware Upgrade and Installation
Follow the on screen instructions, this process will wipe the phone and install the most up to date original carrier / phone firmware, after this the phone should work and you can then root, flash roms etc , it may work for you so try it, don't just dismiss it because it refers to the use of Kies
ag4751 said:
I say this to people who have this sort of problem but I mention the dreaded word and they tend to ignore it but will tell you what to try anyway.
Install Kies 3 for android 4.3 (there I said it Kies) on the top menu bar click Tools then Firmware Upgrade and Installation
Follow the on screen instructions, this process will wipe the phone and install the most up to date original carrier / phone firmware, after this the phone should work and you can then root, flash roms etc , it may work for you so try it, don't just dismiss it because it refers to the use of Kies
Click to expand...
Click to collapse
Unfortunately I've already tried Kies, and it doesn't recognise the device when in recovery mode.
crispin85 said:
Unfortunately I've already tried Kies, and it doesn't recognise the device when in recovery mode.
Click to expand...
Click to collapse
Make sure you are using the USB cable supplied with the phone and it is connected direct to your PC USB port, ideally the ones on the back but don't connect through any multi USB port connectors.
The USB cables and how you connect can make a difference