I was at Fry's today and decided to look at cases. They had none for the Asus but they had one for the Toshiba 10.1 Tablet. I did not have the EEE with me but I went ahead and got it. List was $59.99 but they matched online price so I got it for about $42. Here it is:
http://www.amazon.com/Toshiba-Thriv...?s=electronics&ie=UTF8&qid=1309054174&sr=1-11
So far I love it - it fits well and has access to all the important stuff (except camera). I don't know if I will keep it. I also love the quality and the fact that it rotates 90 degrees from Portrait to Landscape.
It does say TOSHIBA on it but that is also a good thing - if it said ASUS there would be a much bigger chance that it would get stolen.....
Anybody else have this?
i bought a case for the Toshiba too from best buy, $40...lil different from yours but made for the same tablet...i am happy with it...it works just fine...excellent build quality too...no camera access without sum modifying but overall just wat i needed...
http://www.toshibadirect.com/td/b2c/adet.to?poid=512069
MasterJack said:
http://www.amazon.com/Toshiba-Thriv...?s=electronics&ie=UTF8&qid=1309054174&sr=1-11
So far I love it - it fits well and has access to all the important stuff (except camera). I don't know if I will keep it. I also love the quality and the fact that it rotates 90 degrees from Portrait to Landscape.
Click to expand...
Click to collapse
I really like that! been looking for a case which uses bumpers to hold the tablet. How well does it actually fit (is it slightly loose, too tight that it bends the clips slightly or just right?) and are the lengths good?
Any chance you could post pictures because I would really love to get this if it fits good!
I also forgot to ask if the holes for docking the keyboard are unobstructed?
masterjack said:
it does say toshiba on it but that is also a good thing - if it said asus there would be a much bigger chance that it would get stolen.....
Click to expand...
Click to collapse
lol lol lol lol
Definitely interested in seeing pictures of this. I bought the case that Staples has, but I'm not satisfied with it at all.
Bumping this thread. Has anyone else tried this case? Have any pics to share?
Looking at the specs, the Toshiba is 6mm taller (in landscape mode). Do the clips hold the TF securely? Thanks.
I just received it...very disappointing.
Hey everyone. I just wanted to let you know that I ordered this from Amazon thinking it would be a good fit. It was somewhat close, but it does not hold the TF securely. I could easily see the tablet sliding all the way out and hitting the floor if you were not paying attention. In fact, when in portrait mode the tab slides out on most of the angles. There are some fairly big gaps.
I have uploaded some pictures, so hopefully they will illustrate some of the issues.
It is also poorly put together. The tab that snaps in place was loose. I barely pulled on it and it came out somewhat such that now it is off angle and no longer lines up naturally to secure the tab.
On the plus side, it would leave openings for accessing anything you needed to and also folds down flat so you could just use it in your hands.
Bottom line, I am sending it back.
Hope this helps others who where/are interested.
^^^
Feel bad for you man, never understood the attraction with the clip type cases, those things are made of plastic, one involuntary quick movement and this thing could send the Tf flying. The wrap around cases are much better at overall protection.
It's not a big deal. I know that I am picky and was fairly sure I would be sending it back. I didn't have enough experience with these to even know about the clip type cases, so I am glad that I now know to avoid them in the future. I mostly just wanted to let the few people that had bumped this post know that the product was maybe not so good and provide the pictures that had been requested.
I actually like the clip style. I just wish there were options similar to those that the iPad has, where the back is basically a plastic shell that clips. My wife has a Targus case for her iPad2 that does this. Personal preference, I guess. I wouldn't be against a non-clip case if it was very well implemented. I picked up the Solo case from Staples as a temporary measure until some more options are available. Works OK, but I really don't like the corner-cover means of securing the tablet.
Related
As my attempt to organize a group buy was closed I might try the tegratab forum to start one there.
The case is still in the mail but I hope to have it soon.
I will post pictures of the original dock later today because I have to run out for a bit. The dock I hope will be in the mail soon but as I mentioned before.. it's expensive.
Here are the pictures of the official malata dock.
Sorry, forgot to post them yesterday.
I like the looks of the dock. What types of connections does it have on he back?
it's the same connections as the copy version on taobao.
1 x ethernet (10/100)
1 x HDMI 1.2
1 x USB
1 x Power
I hope to have more info on this soon.
looks nice....i am about to buy the tab from Sears, would love to know the price of the dock, is this the official dock ? how much did it cost and from where?
It's the official malata zpad dock but I don't have it yet. Unfortunately the pricing is like $65 so I don't know if I will order it because that's a but on the high side for me too.
The sample case will be arriving Thursday (Dec 2nd) if customs doesn't slow it down any more.
I'm sorry..
Sorry my friend, maybe my mistakes Caused your post has been closed.
You will be get the sample tomorrow?please give me a
information.
The case was just delivered but UPS!
All the work has paid off!! It's a perfect fit for the g-tablet.
Will get some pictures online tonight and start a group buy at a different place.
Here are the pictures with the g-tablet in the case.
Case is made out of real leather (smells better then chemicals) and the inside is a soft suede to protect the tablet.
The viewing angle works perfect for me and when I am looking at the screen I don't have any problems with the bad viewing angles of the g-tablet which is a big plus.
It's very sturdy and even sitting it on books or an uneven surface won't make it tip over.
apx_ said:
Here are the pictures with the g-tablet in the case.
Case is made out of real leather (smells better then chemicals) and the inside is a soft suede to protect the tablet.
The viewing angle works perfect for me and when I am looking at the screen I don't have any problems with the bad viewing angles of the g-tablet which is a big plus.
It's very sturdy and even sitting it on books or an uneven surface won't make it tip over.
Click to expand...
Click to collapse
Is there a version of this without that click flap/strap thing? I'm looking for something really simple like the apple made one for the ipad which is similar in design but doesn't have that clumsy clasp thing. Thanks.
If you want one without the strap then I think that would be possible yes.
It's a fairly custom product.
I'd also prefer without the clasp. Since you have one, can you see whether it is easily removed or unstitched?
3pod said:
Is there a version of this without that click flap/strap thing? I'm looking for something really simple like the apple made one for the ipad which is similar in design but doesn't have that clumsy clasp thing. Thanks.
Click to expand...
Click to collapse
It's the sample..maybe have the one without click flap/strap.instead of Built-in magnets.and,the part of the standing can also be changed into scaffolding. cut into the bottom bracket from the case.
I would love to get one which is custom made for the tablet? How much is it to get it delivered in Florida/USA?
It's not allowed to sell here but send me a PM and I can give you more info.
Case looks great Agreed. Smaller clasp with magnet instead of snaps would be ideal.
How long would it take to get a batch made in such a way?
I'll arrange for one without the clasp/strap.
I would like one without the clasp/strap also
I'm curious to see what it looks like without that clasp/strap. I'm very intrigued by this case, it looks really good.
I'll try to get more info on the options and if without is actually possible.
To give my 2 cents. I wasn't crazy about the clasp either from the first pictures and that it sticks out when sitting down. Now that I actually have the case I wouldn't want it without it. It feels solid when closed and looks very nice. Everyone their own choice
I'll see what info I can get.
I'm trying to get a place together to organize the group buy so hang in there.
For more info just PM me and I will try to get back to you as soon as possible.
Thanks!
I've been looking for a solution that would offer an easier way to hold the TF with one hand and still allow full 360 rotation. I came across these two on Amazon and I was wondering if anyone here has tried them. Here's the quick pros & cons that I can see:
Hand-e-holder: http://amzn.to/jQ5jzc
+ Hold with one hand / 360 rotation
+ Comfortable wide neoprene backing for your hand
+ Size doesn't matter Uses an adhesive disc to mount one side of the holder to the back of your tablet - so it should work with any tablet out there
- I see the adhesive as a con also - not sure I want to stick anything on the back of my TF. Plus, once it's stuck on there it's semi-permanent in that you can't take it off one day and then stick it back on the next (you'll need to buy a new disc for $6)
- Price is kinda high IMO at $40
Video (47 seconds in): http://video.foxnews.com/v/966135816001/gadget-gift-guide-for-dads/
HeloStrap: http://amzn.to/jKnO39
+ Hold with one hand / 360 rotation
+ Comes in multiple colors (red, green, blue, black)
+ Price: Only $25, so $15 cheaper than the Hand-e-holder above
+ Attaches to your tablet via elastic bands or grips so you can easily attach or remove it. Also will work while your table is in a sleeve.
- "Officially" only supports ipad, ipad2, & Xoom. I did a comparison and while the TF is longer on one side, it's shorter on the other. So I jumped into my wayback machine (and google) to figure out the "hypotenuse" and it looks like the TF is ~20mm longer. From what *I* can see of the HeloStrap in the images it certainly looks like the elasticity could accommodate that extra 20mm.
- The part of the HeloStrap that your hand fits into doesn't look as comfortable as the Hand-e-holder. Actually, that was the only con mentioned for it on the Amazon reviews - that it could be a tad more comfortable. But it also wasn't bad enough for folks to warrant it any less than 4 stars.
Video: http://www.youtube.com/watch?v=IpZ4-pdq3ag
I put in an order for the HeloStrap (black) because I like that I can pop it on and off easily - with or without my TF in the sleeve. I'll post back here when it shows up and let folks know how it works out.
I'd still like to hear from anyone else that's tried one of these - OR that has found another option that allows for the 360 rotation.
Please post up how you like it when you get it.
I smell a broken Transformer...
frosty5689 said:
I smell a broken Transformer...
Click to expand...
Click to collapse
LOL
Ya thing so?? Why? The HeloStrap seems to hold fine on the iPads - and it will be a bit more snug on the TF.
Even on the other one, the adhesive seems pretty tight.
I'm not going to be doing any BMXing with it - I'm just looking for easier one-handed holding while couch surfing and swyping with the other..
Unfortunately neither one was Amazon Prime so it may take a several days to get here. Hopefully before the weekend though and I'll be sure to report back!
Never even knew anything like these existed. Of the two I like the HeloStrap more... really tempted to buy one, but I've wasted too much money lately so ill wait for a review.
pogul said:
I'm not going to be doing any BMXing with it - I'm just looking for easier one-handed holding while couch surfing and swyping with the other..
Click to expand...
Click to collapse
Exactly. Worst case scenario for me would be it falls onto me lol.
Hmmmm...imagine what happens when one swipes at some annoying flying bug....methinks major fail?
Unique but pass.
I look forward to impressions
skeeterpro said:
Hmmmm...imagine what happens when one swipes at some annoying flying bug....methinks major fail?
Unique but pass.
Click to expand...
Click to collapse
What? You'd likely shatter your pad doing that no matter what.
I went a similar but slightly different route with the Padlette (padlette.com) which I bought off of Amazon. It's not as fancy as the other options, but it's pretty heavy duty and I have little to no fear about it breaking or slipping off. You can either hold it in one hand or you can slip you hand in behind.
In either case, an option worth looking at.
How comfortable is the padlette on your hand? Does it feel tight after an hour or two holding the Transformer? Is it equally comfortable in portrait and landscape? Also, how is the fit on the tablet?
Also, a question about the Helo, Do the straps at the corners mark/scratch the tablet trim or screen?
Excellent FIND...and I think I am tending towards ordering one too....
I will do more research as well and keep you'al updated...
Good luck with yours.
Regards,
Misfitz
nv88 said:
How comfortable is the padlette on your hand? Does it feel tight after an hour or two holding the Transformer? Is it equally comfortable in portrait and landscape? Also, how is the fit on the tablet?
Click to expand...
Click to collapse
I find it very comfortable. I was participating in an event this weekend that required that I hold the pad for roughly four hours and I did so with no problems. You can either grab it with your fingers (my preferred method) by hooking them around the straps, or you can simply slide your hand in behind.
Because it's at the same angle in either portrait or landscape it's equally easy to hold it in either configuration. I also like that it's removable without leaving any evidence that it was there. The only (minor) problem I've seen is that I have to have it oriented in SW to NE because in the NW to SE direction it covers up the volume rocker.
Thanks. I'm very interested in the padlette... sounds like it may be worth $20.
Sorry for the delay in following-up. I wanted to put a short video up, but my Sony Vegas just hasn't been cooperating with me.
I received the HeloStrap last Thursday and finally had a chance to play with it last night.
Overall, I think it's great. I definitely agree with the 4/5 stars rating on Amazon. The only con being that the hand part of the strap could have been more comfortable. It's not horrible by any means. You just notice it when you first start using it, but then quickly forget about it.
It still looks like the Hand-e-holder would win in the comfort category, BUT - I prefer the HeloStrap because of the lower price and the fact that I can slip it on or off easily vs having to semi-permanently stick the Hand-e-holder on. If I didn't have the Asus sleeve for my TF that probably wouldn't be as much of a factor.
BTW, the HeloStrap gives a nice snug fit on the Transformer with or without the sleeve. It's snug, but not so tight that it would be a concern (this is what I wanted to show in the video). It definitely feels very secure - I don't see the TF "falling out" of it or anything.
It certainly made the couch surfing MUCH more enjoyable last night which was my primary goal!
If I didn't have the sleeve I would be much more tempted to try out the Hand-e-holder, but the HeloStrap is the one that gives me the option of using it easily with the sleeve or without. Now i just need to see if my wife can come up with some idea for making the hand part a lil cushier!
I'll take another crack and getting a video together and will post that as soon as I can.
I finally got around to shooting a quick video of the HeloStrap on my TF. Hopefully this will give you an idea of how it fits - with and without the sleeve.
http://sleeve360.com/
This looks great; wonder if it would fit the Transformer.
lost101 said:
http://sleeve360.com/
This looks great; wonder if it would fit the Transformer.
Click to expand...
Click to collapse
Not sure, but given that it's a full sleeve/case made to fit the ipad, I don't think it would work for the TF. The dimensions are too different.
The HeloStrap just needs to stretch diagonally from one corner to another - whereas that sleeve360 would have to fit all 4 corners.
Let us know if you give it a shot though!
That extra tension on the corners of my Transformer would amplify the screen bleed issue I'm having by 200%. Looks cool though.
Sent from my Transformer TF101 using Tapatalk
Know what - I think you can stick this to the outer part of your folio and use it. So that the TF remains pristine.
Even better - with the Techtree stand, you can create your own 360 degree rotating hand holder.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250789197947#ht_3153wt_1139
Seems like a great price. Not sure if it fits the GTablet exactly, but turns out this guy is based like 5min from my house, so I can always return it to him if its not good.
Anyone have any opinions on this?
you could always "ask a question" to get the dimensions. I'd be afraid that it will stick out the sides
Almost definitely not actual leather (I hate deceptive descriptions) and there doesn't seem to be any visible way to actually ATTACH the tablet to the thing. Horrible picture details, and it is highly unlikely a single case could hold (well) a 7/8/10 inch tablet PC like the seller says.
I would pass on that one. Just go to electroniccrap.com or look for listings here for the ones MADE for the G-tablet.
Dishe said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250789197947#ht_3153wt_1139
Seems like a great price. Not sure if it fits the GTablet exactly, but turns out this guy is based like 5min from my house, so I can always return it to him if its not good.
Anyone have any opinions on this?
Click to expand...
Click to collapse
There seem to be 2 clips on the bottom and 1 on the top to hold it. Most cases come with 1 (or 2 ) more clips on the side. Without this there is a chance of the tablet sliding out through the sides. Although once you have side tabs you have to be careful that they dont block the usb port.
Also you *have* to check the dimensions
I have a
http://witglobal.com/goods-2286-10i...for+Viewsonic+Gtablet+10+-+Free+Shipping.html
Build quality is not super, but it is functional.
It is $ 24.99 but will take 2 weeks or more to get to you.
don't waste your money
I've had one of these before. They are really cheap looking and are not leather but a shiny slippery plastic. It is not recommended for use in a professional setting unless you enjoy people laughing at you. There is a thread in this accessories section that covers this case at length. Search for USB keyboard case.
Also, the tablet does not stay firmly in the case and will slip around a lot and may even fall out.
Avoid this case like a dirty diaper.
sjmoreno said:
I've had one of these before. They are really cheap looking and are not leather but a shiny slippery plastic. It is not recommended for use in a professional setting unless you enjoy people laughing at you. There is a thread in this accessories section that covers this case at length. Search for USB keyboard case.
Also, the tablet does not stay firmly in the case and will slip around a lot and may even fall out.
Avoid this case like a dirty diaper.
Click to expand...
Click to collapse
LOL, you and me have different priorities! I'm not buying this to wow people and I'm really not concerned about people laughing at me. I am concerned about the tablet not fitting tho. Either way, this case would only be for when I wanted a keyboard with me, which is not all the time (otherwise I'd stick to my netbook which is about the same size as the tab+keyboard case).
When I'm going on a trip, plane ride, camping, etc, and this will be the only thing I have access to when traveling light, I like the idea of a keyboard option. But that's another thing to carry, so I'd rather it be built into the case. But the rest of the time, a thinner classier case (like the Kindle DX ones) would be preferable to me, especially to sit and read in portrait orientation.
cbay said:
There seem to be 2 clips on the bottom and 1 on the top to hold it. Most cases come with 1 (or 2 ) more clips on the side. Without this there is a chance of the tablet sliding out through the sides. Although once you have side tabs you have to be careful that they dont block the usb port.
Also you *have* to check the dimensions
I have a
http://witglobal.com/goods-2286-10i...for+Viewsonic+Gtablet+10+-+Free+Shipping.html
Build quality is not super, but it is functional.
It is $ 24.99 but will take 2 weeks or more to get to you.
Click to expand...
Click to collapse
That's a really great find, and for $4 more than this ebay auction, you are vouching for the fit! Do you have any pictures of your G-tablet fitting into that case?
Dishe said:
That's a really great find, and for $4 more than this ebay auction, you are vouching for the fit! Do you have any pictures of your G-tablet fitting into that case?
Click to expand...
Click to collapse
Dont have pics, but it fits (it is made for the gtablet),
Some info/pics are at
http://forum.xda-developers.com/showthread.php?t=1015853
goodintentions had a video review for his, on that thread but the link does not seem to be working.
I need a keyboard rarely, when I am typing out a big email. It is functional for that purpose. Some minor cons as I see are
1. Even with tabs on 3 sides, it can slip out of the 4th side, so you have to hold it right. Am thinking of adding a Velcro strip on the 4th side.
2. The leather is suspect, and it stunk up my room for a few days after I opened it.
3. It adds quite some weight.
4. Have to reboot the gtablet after connecting the keyboard most times for it to work.
5. The keyboard connects to the big USB, the small USB is covered by the left tab. But I rarely use that when it is in the case.
But it is $25, the USB cable length is fine, and it does have a magnet for the USB cable !!!
I bought one of these cases off ebay, just waiting for it to arrive. I bought one "specifically" made for the gtablet, with the tabs not blocking the usb port. I know I could of had one for less, but would have had to mod the case to fully work with the gtablet. I was actually looking at the one OP posted to save a few bucks, but I didn't like the way the case was designed, with no tabs to hold the tablet in place on the sides.
I"m not sure what to make of this case for the transformer. Does not have that many picture to show how well it fits and covers the transformer without the dock or with the dock. Does anybody have this product?
http://www.amazon.com/Poetic-Ultra-...J6/ref=sr_1_16?ie=UTF8&qid=1314846049&sr=8-16
been waiting for this to come out and someone to get it!
its been on preorder status till today i think
narikki said:
been waiting for this to come out and someone to get it!
its been on preorder status till today i think
Click to expand...
Click to collapse
It's available now for 25 $ at Amazon. I am ordering one tonight.
manaskb said:
It's available now for 25 $ at Amazon. I am ordering one tonight.
Click to expand...
Click to collapse
when you get it can you post some pictures up of how it looks with the dock without the dock fully closed thank you
I pre-ordered one last month and it shipped friday. Should have it this week. I'll post some pics when it gets in.
According to tracking, mine should be arriving today. If so, I'll get some pictures up.
Pictures are attached.
sl0wd0wn said:
Pictures are attached.
Click to expand...
Click to collapse
wow that doesnt look like the pictures from the amazon page.
how is the quality? imho doesnt look to great!
What poor designing...they really need to make one of these but with something like hard silicon/TPU/Plastic, similar to the InCase products for Apple Macbooks. Those just snap on in two pieces to the exterier of the laptop and cover it nicely when its closed. This just looks like a bombardment of faux leather all over the place.
narikki said:
wow that doesnt look like the pictures from the amazon page.
how is the quality? imho doesnt look to great!
Click to expand...
Click to collapse
Received mine today. I can't send it back fast enough. It's fairly low quaility and does not fit well. The description says it is leather but I can't find any. Seems to be made of vinyl and fake suade. It was only $23 so I was not expecting much but the fit and quaility was poorer than I expected.
This looks like it could have promise for a similar pricepoint.
http://www.ebay.com/itm/Asus-Eee-Pa...?pt=US_Tablet_Accessories&hash=item3f0d4f8fa5
It's a shame that the Poetic case turned out to be such a disappointment.
I'm surprised, because I just got this Poetic case on eBay:
http://www.ebay.com/itm/280719327360?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
and it's great. It arrived in about 4 days from California.
It's a sturdy case that holds the Transformer using corner/side clips only,
which leaves all the ports easily accessible. It appears to be made of leather, or
at least a good quality plastic simulation. The case closes with a curved metal clip
which seems well-padded and doesn't damage the tablet.
The case has three positions. I use the highest for watching movies and the lowest for anything
that requires lots of typing. The front of the case folds completely flat behind the back,
and you can even dock the tablet, although the case isn't intended to hold the dock.
The best part: Even though the pictures don't show it, the flap connecting
the front and back has an opening for the dock/charging connector.
I can charge the tablet without removing (or even opening) the case!!!
I e-mailed the vendor and they assured me that the dock/charging connector
opening is standard and offered a refund if anyone gets one without it.
I've tried a bunch of cases - separate sleeves for the tablet, a "dual" sleeve with separate
pockets for the tablet and dock, etc., but this is the one I'm staying with.
If anyone is interested, I got the Diamond design one
Pics: http://imgur.com/a/ZXR7c
I just got mine! I actually paid 26something USD to ship it to The Netherlands (why are these rates so ridiculously high!?)...
In the end, it works fine for me. It fits my tablet, I don't have to take it off to attach the keyboard dock and it also closes with tablet + dock inside. Details are fine, fit is reasonably good (it seems to be a bit off at the front facing cam).
$24 makes a good buy.. at 50 (including shipping), I feel a bit dissapointed.
Then again;
to protect my phone, I bought www.pielframa.com last year they don't sell Asus eee cases (yet??). Cost me quite a bit. Great finishing, real craftsmenship! When I dropped the phone, the leather ripped and bit by bit fell of the casing. Now, there's a leather-less patch (about 1 cm) doesn't really bother me, but it made me wonder how much a phone case should actually cost.. knowing you're not that carefull and might drop it anyway
I received my MiniSuit Portfolio on Saturday.. It is a very nice case, very well made. Yes - it adds bulk but if you can't tell that when you ordered it then you didn't look at the pictures . It's a tri fold so of course it will add bulk, plus the leather. It is obviously very functional, and the side that holds a business card can probably hold a few pieces of paper but otherwise too much or it will just get entirely too fat..
OK, so the obvious things aside..... Here come the constructive criticisms. I'm a little concerned with the fit. The leather covers the bezel so when you dock it, it is really, really really tight.. I wonder if it puts "stress" on the fit of the dock and tablet.. The part that holds the dock snaps on.. It has little strap on the top corners, and when you add those it added and even tighter fit.. If you leave them off, and the dock slides down quite a bit when you are using it.
After only one day's use, the parts of the leather that go between the tablets and dock are pretty scuffed up.
Since the dock snaps off, I thought I'd be able to use the case for just the tablets if I didn't have the dock. Well I CAN, but the magnetic closer is part of the tri-fold that is on the dock portion, and so unless you have that part (even if it's empty), then the cover is very "flappy" (which is OK, so just fyi).
In all fairness, I am calling MiniSuit tomorrow. I need to get ask about another part of my order anyway (a different case, different purpose). This portfolio case is also ever so slightly "off" center enough that the camera is partially covered up (yes I've tried moving it several times but it still settles into the same place) I don't think that is normal, my friend's case is aligned perfectly.. So maybe this one is just a little warped overall.
I'm definitely giving MiniSuit benefit of doubt here, I am sure they will replace this one anyway since he camera hole is off center. Perhaps they can explain the width of the the leather between the tablets and dock. It's late and I can't remember ever seeing a "spec" for that. All I know is that it is really small.
I've include some insanely detailed pictures for reference if anyone would like to see what I'm talking about
EDIT:.. Pics will have to come another time, gallery not cooperating
slugbug2010 said:
I received my MiniSuit Portfolio on Saturday..
I've include some insanely detailed pictures for reference if anyone would like to see what I'm talking about
EDIT:.. Pics will have to come another time, gallery not cooperating
Click to expand...
Click to collapse
I'm looking forward to the pics! Thanks!
I just installed one of these covers on my wife's Prime and the camera on the rear is way off to one side also. And there are a few blems and over glues on the cover. I am not happy with this product. Let us know what you find out. I bought mine through Amazon so I am not sure what is my next step.........Thanks......
Ok, I talked to them and they were really great. They are sending me a replacement (and a prepaid label to return the one I have). They offered me a choice of replace or partial refund but I want to try a replacement. I told them I had photos of the camera port and the way the pictures came out and they very nicely asked if I wouldn't mind sending those in and thanked me in email for doing so.
I didn't not ask them about the leather being a bit thick (for my liking) or it getting scuffed already. I've read the reviews on Amazon and I don't really see anyone else mentioning this or thinking it's a problem. I'm hoping some folks on here get theirs in so we can see if there is a "space" difference between the og and Prime and maybe that is why it's not mentioned?
I think that is going to have to be a judgement call on my part. Dangit - if they had just made the bottom part hold the tablet with nice straps it would be fine, but the fact that it scuffed leather after one day ... seems to me like it is too tight. On the other hand......my friend looked at it, said he thought it looked fine and that it was leather - it would "break in" and flex. If I thought I would ALWAYS have the dock with it, I might be tempted to cut the dang leather off the bottom, but you can't really do that or the tablet will fall out with the dock gone. If I keep it, I might end up rigging it after a while anyway
Like I said - it's a nice case, very functional, it does add bulk, but anything we get that carries both will do that.
Ok...pictures. I used a toothpick for reference, you all have one of those and can tell for yourselves how far on will go in the small space between tablet and dock
Yeah, the case didn't fit my tablet and dock perfectly either. But their customer support is nothing short of amazing. I just emailed them, showed them a photo of the problem and they are sending me a replacement (they shipped it the same day I contact them). Should be getting it soon. Best thing yet is they don't even need me to return my defective unit.
duclet said:
Yeah, the case didn't fit my tablet and dock perfectly either. But their customer support is nothing short of amazing. I just emailed them, showed them a photo of the problem and they are sending me a replacement (they shipped it the same day I contact them). Should be getting it soon. Best thing yet is they don't even need me to return my defective unit.
Click to expand...
Click to collapse
Same here - they shipped it out and I have a tracking number the same day I called.
I didn't think they wanted the defective one back either, but in their email they wrote " A prepaid label will be included with your shipment for the defect". So.....I guess they want it back. Which is fine of course. I'm just not sure what they will do with it cuz I really don't think they are going to use it to make any changes or anything.
Well, I got my replacement. They did not end up sending a pre-paid return label so they don't want the defective one back apparently.
However the new one is worse than the first one as far as the camera port hole goes. It is obviously cut VERY wrong. So now both have been off very far towards the flash, covering parts of the camera lens. I realize i wont be using my camera very often, but I have noticed that it's rarely "planned" when I DO want to use the camera.
I also still have a big concern about the leather being so think between the dock and tablet. If everything else were perfect, I would likely rig it. I'd probably just cut it off. This would really only present a problem if you were to have the tablet without the dock because the tablet could slip out of the case with the having that section secured, but I'd just not use that case without the dock then (I have several other cases)
This is the perfect case for the combo, but it is flawed
Funny thing is - I received my other Minisuite case and LOVE it!! The ports and camera holes are perfect. It's the 360 degree rotating one (does not accommodate dock). I think, obviously, all these cases that look the same are made by some company in China, and then stamped by companies here. But for some reason the template they used for the nice leather keyboard/tablet combo is just not right.
Pretty much my experience, I do not believe they had an actual Prime in hand when they designed this case. Not pleased overall and waiting for better options.