Hi, all. Relative noob here. Fascinate, Stock ED04 OTA, Rooted, modified stock kernel to "stick" CWM, Bloat frozen using TB.
I want to take the next step of flashing a ROM, and am doing (I feel) due dilligence by reading everything possible in this forum. However, I think I'm starting to suffer from information overload, and confusion has set in.
I used Odin to flash CWM 3.0.2.8x.ti. Immediately after selecting backup and restore/backup, I get "Error while backing up boot image". I see a few posts with the same statement, but no resolution. Flashed back to CWM 2.5; and backup appears to complete successfully. However, the date of the backup is 2000-01-01; and this is consistent on repeated attempts. The time and date on my phone (when booted) is correct.
Am I missing something? Any help would be greatly appreciated.
dhartman977 said:
Hi, all. Relative noob here. Fascinate, Stock ED04 OTA, Rooted, modified stock kernel to "stick" CWM, Bloat frozen using TB.
I want to take the next step of flashing a ROM, and am doing (I feel) due dilligence by reading everything possible in this forum. However, I think I'm starting to suffer from information overload, and confusion has set in.
I used Odin to flash CWM 3.0.2.8x.ti. Immediately after selecting backup and restore/backup, I get "Error while backing up boot image". I see a few posts with the same statement, but no resolution. Flashed back to CWM 2.5; and backup appears to complete successfully. However, the date of the backup is 2000-01-01; and this is consistent on repeated attempts. The time and date on my phone (when booted) is correct.
Am I missing something? Any help would be greatly appreciated.
Click to expand...
Click to collapse
i have had the same thing happen every time i try and backup. I'm wondering if it has anything to do with the newer recovery b.c when i had 2.5 i had no issues with it. Anybody have an answer for this?
I was in the same boat as you: rooted and bloat frozen via TB since the first week, and just added the modified kernel with CWM 3 earlier this past week. Haven't had any problems with it. I used Heimdall to flash CWM and the kernel. Now I'm running Evil Fascination with the LG Alternate Launcher. Tried ComRom but didn't care for it, though the default wallpaper was very pretty.
Back to the point, after I flashed the kernel and CWM I restarted the phone, let it boot, then rebooted into recovery to backup, instead of unplugging it and immediately booting Recovery.
Honestly, you've made it this far, you want to get a new ROM, I say download one and follow the directions (read them three times top-to-bottom) before flashing, and you should be good.
Yeah - I think Evil is where I want to end up until CM7 is fully functional (just spent all morning reading the CM7 waiting room thread).
Unfortunately, I'm apprehensive about flashing a new ROM until I can get a good backup image. I'm not sure why I'm getting the erroneous date on the backups. I could certainly be doing something wrong; just not sure what (if anything).
Maybe I need to use a different CWM? 2.5.1 and 3.0.2.8. don't seem to have worked for me. Also, If I understand what eulipion2 said, I have already fully booted, then powered down and rebooted into CWM to do a backup. 3.0.2.8 fails and 2.5.1 gives be incorrect dates.
Going to do a few hours of reading on CWM, I guess!
I'm using the first kernel listed in this thread from times_infinity. I initially flashed ComRom, didn't like it, kept this recovery, and flashed EF. Works great so far.
Give the Nandroid a go with this Recovery and see if it works for you.
hey i figured out how to get the back up to work. you have to enable voodoo and then it will work
Hey guys. Thanks for the suggestions. Tried the CWM 3 link from above, still no dice. I suspect I may need to have a voodoo kernel installed to actually enable the voodoo and try the backup again. Makes sense I guess.
Getting frustrated.
Success! Flashed a voodoo kernel, and was able to get (what appears to be) a successful nandroid backup with 3.0.2.8 (red). Never did get 2.5.1 (yellow) working. Strange, but irrelevant. CM7 build 7 is looking like it's ready for a test drive.
Related
So i'm going to consolidate and give everyone a brief recap on how I fixed my phone since it required the use of SEVERAL posts. I figured someone will eventually get caught in the same situation I was.
This is by no means the best way, or the correct way to fix any phone, do this at your own pace and liability. I am, and no one mentioned in this thread is liable for your phone.
Please excuse any of my grammar mistakes, this is spewing out as I type.
History: Stock DI01 update w/ JT's Voodoo .2 OC Kernel.
Flashed JT's Super Clean ROM V.4 & Remix Incognito Theme.
** Market would no longer work. I had this issue before updating to the 2.2 market after the DI01 update, so I uninstalled and worked again, however, that option wasn't available with the ROM Flash.
I couldn't find a single fix that would work to get the market to work, even ADB pushing older market apk's to the system wouldn't fix it. I decided to do a flash of JT's Super Clean ROM V.2, that didn't fix the issue either.
**I was clearing data and wiping dalvik after each flash**
With nothing seeming to work, I decided to try Deodexe's Zinc ROM, and this is where **** hit the fan. After doing this, I sent my phone into FC boot loop hell. I was getting the process.acore FC everytime I pressed a key. I rebooted back into Clockwork, tried to recover from an old ROM I had backed up the previous day, notta. Damage was done. I was getting FC bootloop hell with a very crappy performance.
I decided it was time to Odin restore and start over. These aren't the exact steps I took, but if I had to do it over again, this is how I would do it. If at any point you're getting a process.media FC, remove your SD Card, and leave it out until you need it for CWM.
STEP ONE:
If you installed Voodoo (at any point, removed or not, do this step)
Thanks to adrynalyne
http://forum.xda-developers.com/showthread.php?t=804784
This was the main culprit behind my phone not working correctly after a complete restore. I moved this to the top of the list, because after that, it's downhill.
STEP TWO:
Completely Restore with Odin Restore Files
Thanks to fallingup
http://forum.xda-developers.com/showthread.php?t=782204
The instructions are a little un-clear, but do this. First, Only use the PDA option, and flash each backup one at a time along with the PIT file. You're not out of the clear yet. Read on.
STEP THREE:
Flash CWM Recovery (read my notes below)
Thanks to fallingup
http://forum.xda-developers.com/showthread.php?t=788099
After you've flashed CWM. Boot into CWM Recovery, Boot back in Stock Recovery and wipe data and cache. Boot back to CWM (select sd:update.zip) and do the exact same thing there. Reboot phone.
STEP FOUR:
Do a data factory reset
Even though you have just restored the **** out of your phone, you're still not there. Get through all the account setup fields and go to Settings > Privacy > Factory Data Reset.
After a reboot, you should be on your way to a completely 100% stock fixed phone. At this point, I would suggest making a ROM back up of this point before moving ahead with flashing again.
LAST STEP (for me anyway):
Restore apps via Titanium Backup
This restored most my apps and settings that I had already saved, including LauncherPro and the backups I had for that. If you haven't used Ti, then use whatever app backup app you do have, if you do indeed have one.
I decided to re-flash JT's Super Clean ROM V.4 found here. Thanks to JT
http://forum.xda-developers.com/showthread.php?t=796171
I am also running the Remix Incognito Theme here: Thanks to frostman89
http://forum.xda-developers.com/showthread.php?t=801867
Right now I'm mixed on updating a new Voodoo Kernel, I haven't decided if I want to do that again or wait for something else.
Thanks again for all the DEV support, hopefully someone searching will find this thread useful.
Pretty much my standard routine when trying new kernels.
I have a nandroid with my basic rooted setup (apps and data intact), so this doesn't set me back by a huge amount.
Just a few differences...
I use:
Odin (System, then kernel) (step only needed if things are *really* messed up...won't boot)
Boot into Recovery
flash update.zip to get into CWM
Wipe Data/Cache/Davlik
Reboot into recovery
run jt's voodoo_uninstall (flashes stock.zip and replaces mbr with stock mbr)
reboot into recovery
restore nandroid image.
This has yet to fail me and usually takes under 10 minutes. The nandroid image is key. Most of the time, I can skip the Odin step completely if I am not seeing anything truly, staggeringly horrific going on.
Again, jt's voodoo-uninstall seems to solve a lot more than just voodoo issues. This thing should get it's own topic/forum/entry in ROM Manager/zip code/nobel award...you get the picture.
PhoenixPath said:
Again, jt's voodoo-uninstall seems to solve a lot more than just voodoo issues. This thing should get it's own topic/forum/entry in ROM Manager/zip code/nobel award...you get the picture.
Click to expand...
Click to collapse
+1 I agree
Nice write up! I'm sure this will help many people.
Thanks
This along with several other threads allowed me to recover from my own mental retardation.
Gotta remember to remove voodoo before doing stuff. I should know better.
Thanks again.
This is not working for me. I removed voodoo (using the uninstaller). I then did odin and my phone boots but I cant do anything past the unlock bc of all the fcs I get. I wiped the cache and data. CWM is not working, when I try to do the update.zip I get a "failed to verify whole-file signiture". - I deleted the voodoo folder from the sd-card after uninstalling voodoo, dont know if that contributed to the problem. Any ideas?
Ke1evraTi said:
This is not working for me. I removed voodoo (using the uninstaller). I then did odin and my phone boots but I cant do anything past the unlock bc of all the fcs I get. I wiped the cache and data. CWM is not working, when I try to do the update.zip I get a "failed to verify whole-file signiture". - I deleted the voodoo folder from the sd-card after uninstalling voodoo, dont know if that contributed to the problem. Any ideas?
Click to expand...
Click to collapse
Sounds like you need to re-flash ClockworkMod through Odin. I'm guessing it got wiped out when you went back to stock.
So i factory reset my phone (on stock), made a nandroid backup, then flashed one of bionix's roms. a couple days later i want to try another rom so i went into rom manager and chose to restore and picked the backup that i made earlier while on stock. It completed the restore process and went back to the clockworkmod recovery screen, then i chose reboot. now the phone sticks at the vibrant screen, but makes the bootup sound. weird huh? do i have to use odin? or is there somehow i can still restore using clockworkmod. i am able to still get into recovery btw . if the only way to fix is thru odin, can someone link a current post with instructions? thanks peeps.
BTW i was on JI6 when backing up, and i read fusion 1.1 runs on JI2 so......help?
Feel free anyone to correct me since I'm also fairly new at this, but it sounds like you may have soft bricked your phone. The way I understand it is that you needed to flash back to a stock kernel before restoring your stock ROM backup.
Getting back to a stock kernel can be done by either flashing a ROM that uses/applies it (they usually state what kernel they're using), or just flashing the stock kernel yourself, which can be downloaded here: http://forum.xda-developers.com/showthread.php?t=733792
Anyway, here is a thread that explains ODIN: http://forum.xda-developers.com/showthread.php?t=810130
Good luck! I fear I'll be in your shoes at some point, so hopefully I helped a little.
I had zero problems when rooting and flashing my G1, but now with my Vibrant I am not sure what I did.
A few excellent stickies at the top but I seem to not be making any progress.
Here are the steps I took.
I had a stock Vibrant running 2.1
I downloaded ROM Manager, installed clockwork mod.
Did a backup of my current system ( was I supposed to do a clockwork AND nandroid?)
Downloaded and successfully installed a ROM called Blackhole 1.0
it runs ok but didn't give me the option to switch from 3G to EDGE data, and then I couldn't get internet access at all so i decided to restore my original stock vibrant system.
So I rebooted into recovery, selected restore (my phone won't go into recovery anymore for some reason) and waited, it took a while, then I rebooted (forgot to wipe), but it just got stuck on the Vibrant screen. So I booted into recovery mode again and wiped just user data not cache and rebooted, same thing stuck at Vibrant.
Now i keep hearing about something called ODIN, what I can tell it is some kind of flasher program for ROMS, nobody seems to give any kind of link or anything, is it greymarket or something?
So where am I now? I think the excellent noob guide needs to be updated a bit more.
My phone can get into download mode (whatever it is for i don't know) but it won't get into recovery mode anymore.
Everything you need is here: http://forum.xda-developers.com/showthread.php?t=771111
i think what happened to you is you flashed a 2.2 ROM then tried to revert back to 2.1 without doing the proper downgrading steps i.e. you did not flash a 2.1 kernel first.
but since you can get to download mode.. just flash stock JFD or JI6 through ODIN and you should be good.
good luck
Once you get back to stock don't give up on the 2.2 toms. Try axura or nero. They might have a few minor bugs but its way better then stock 2.1.
Powered by Axura with a dash of Voodoo
I have done the samething as you, coming from a nexus one it seemed easier to flash roms without worrying about downgrading kernels or what not. Recently I was on Nero froyo and flashed to a different rom, and tried to revert back but ended up stuck at the vibrant screen. Think it has something to do with voodoo lag.
Anyways I had to use Odin with the no brick froyo off ebproductions. Ran that and uploaded clockwork, reinstalled voodoo lag fix and was able to nandroid back to my Nero set up. Somewhat of a pain but once you've done it, no need to worry about bricking
xtone said:
Everything you need is here: http://forum.xda-developers.com/showthread.php?t=771111
i think what happened to you is you flashed a 2.2 ROM then tried to revert back to 2.1 without doing the proper downgrading steps i.e. you did not flash a 2.1 kernel first.
but since you can get to download mode.. just flash stock JFD or JI6 through ODIN and you should be good.
good luck
Click to expand...
Click to collapse
So the steps that are in this page?
http://forum.xda-developers.com/showthread.php?t=734475
GreggoryD502 said:
Once you get back to stock don't give up on the 2.2 toms. Try axura or nero. They might have a few minor bugs but its way better then stock 2.1.
Powered by Axura with a dash of Voodoo
Click to expand...
Click to collapse
Well as long as I can use Odin if I f-up royally like above then I might give it a shot.
Need to read about downgrading kernals or whatever. Might just wait for Cyanogen 6.1
Just so you know, the backup utility in Rom Manager (clockwork) is really just shortcut to a nandroid backup.
The way I have things set up for backups, and this is just for my personal convenience, is as follows...
I have a stock JFD ODIN rom to flash in case anything goes wrong. (A lot of people here will tell you to flash this whenever flashing a new rom. It is safer, and cleaner to do it this way, but not absolutely necessary)
I make a nandroid of my last stable rom (I only keep one at a time cause the files are huge) and keep a backup of that on my PC.
I backup all my apps and a few other things (call logs, bookmarks, sms) through Titanium backup. If you get the pro version, you can load it up after flashing a new rom and have it automatically restore all your apps in one click (system settings can be dangerous to restore when going from rom to rom, so be careful with those.) I also keep a backup of this on my PC.
I will also occasionally backup both of the sd cards to the PC.
Maybe overkill, but you probably wont ever lose anything forever.
thegreatcity said:
Just so you know, the backup utility in Rom Manager (clockwork) is really just shortcut to a nandroid backup.
The way I have things set up for backups, and this is just for my personal convenience, is as follows...
I have a stock JFD ODIN rom to flash in case anything goes wrong. (A lot of people here will tell you to flash this whenever flashing a new rom. It is safer, and cleaner to do it this way, but not absolutely necessary)
I make a nandroid of my last stable rom (I only keep one at a time cause the files are huge) and keep a backup of that on my PC.
I backup all my apps and a few other things (call logs, bookmarks, sms) through Titanium backup. If you get the pro version, you can load it up after flashing a new rom and have it automatically restore all your apps in one click (system settings can be dangerous to restore when going from rom to rom, so be careful with those.) I also keep a backup of this on my PC.
I will also occasionally backup both of the sd cards to the PC.
Maybe overkill, but you probably wont ever lose anything forever.
Click to expand...
Click to collapse
OK I will just do the long way from now on. I use this phone on AT&T, I was worried that I flushed $500 down the toilet but ever since i modded my first phone way back in the day i've been addicted.
Running Odin and my phone is in download mode, about to flash this b**ch.
wish me luck.
I flashed Odin on my phone to revert to stock. Re-Rooted it but now I can't flash Clockworkmod. Please help D:
use the update.zip posted here. You want B.
I think I'm one step from an expensive paperweight.
I Odined CWMRecovery_DJ05_DL09.tar.md5, flashed adrynalyne's update.zip, applied ChainDDs superuser, then flashed Superclean 2.9.
I got stuck in a bootloop between "SAMSUNG" and CWM's recovery.
I backed up, wiped Data and Cache then tried to reboot back to stock and have gotten only as far as the stock recovery.
I'm trying to download DI01package3.tar.md5 but the damn thing keeps getting stuck at 83.7mgs.
Anyone have any suggestions or am I SOL?
Also, which kernel should I use with which ROM bc I'm really lost there...especially after this.
UPDATE
I found DJ05.tar.md5, Odined it and repowered up the phone. It's back to basics, but it's ALIVE!!!
From what I've read, Adrynalyne's DI01package... is a safer bet, but this one works so far.
Noobs like me: I'm going to try to find and explain as best I can the CORRECT way to root your Fascinate and avoid a dumbass mistake like I made.
To the devs, mods and everyone who wrote on this earlier, THANK YOU!!
Hello all,
I have a question that has not been answered after many hours of searching. Hopefully I'm just dumb, and my buddy's stock firmware and data isn't hosed. I'm trying to get his stock firmware running again so I can back it up safely.
What I've done:
Tried to flash CWM's update.zip via stock recovery (signature verification failed on the three different zip's I could find in the forums and various links)
Used Heimdall to push "cmenard-T959-CWM" zImage (this worked, and I get a different screen at boot)
The phone boots to the point of the T-Mobile splash screen with the annoying shriek sound, but goes to a black screen after. If i touch any of the soft buttons, they light up and remain lit. It'll stay like that for at least 20 minutes.
Is it possible to re-flash the system partition and not the data partitions using ODIN? Is that even feasible? Like I mentioned above, I'd like to get the stock firmware running such that I can make a good backup of it with all the user data intact. I haven't been able to because the CWM+root wouldn't flash.
Any suggestions or insight would be greatly appreciated.
thanks in advance!
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Toast6977 said:
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Click to expand...
Click to collapse
Thanks for the suggestion, Toast. I don't believe the internal SD has been messed with, and I don't plan to mess with it either. The thread you linked is not quite related to my issue, as far as I can tell.
I am able to get into Download Mode, and the Stock Recovery mode as well. However every time I try to flash an 'update.zip' with the Stock Recovery, I get an error about Signature Verification Failure.
After stepping back from it for a day, I think I've gained some clarity. Since all I've done is flash a different Kernel with Heimdall, I'm going to try to flash a stock kernel then see what happens.
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Toast6977 said:
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
Click to expand...
Click to collapse
Woodrube said:
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Click to expand...
Click to collapse
hahaha poltergeist!
Wow, so I'm glad I asked. I wouldn't have known about this issue, as I do not have any history with this device.
I know that the ROM is currently 2.2, and the Android System Recovery is showing "3e".
If I understand correctly, once I'm ready to flash up to ICS, I'll need to ODIN back to 2.1 to get Android System Recovery "2e", which will let me flash 'update.zip' packages freely. Then I flash an 'update.zip' to get CWM, then flash CM7, then CM9 (and CM9 is my intended destination).
The things mentioned in the thread you linked do appear to apply to my situation.
However I still want to get the stock OS booted and working, then do a Nandroid backup of it. (it's the computer tech/security pro in me. Since I'm new to this device, I -tried- to read up on everything first, and didn't want to make a change without being sure it would work.)
Does anyone happen to know if flashing a stock kernel over the 'cmenard' kernel will harm anything, and hopefully get a successful boot? Again, I'm trying to get the stock ROM booting again in order to verify I have everything I need off of it, then do a nandroid backup. Flashing to CM9 will come afterwards.
Ok, here are some things for you.
Here is a kernel pack that you can use. Read the OP because there are Froyo AND Gingerbread kernels in there.
[KERNELS] Moped_Ryder SGS Kernel Pack v2 [20+ Froyo/GB Kernels]
I really suggest using something like BaliX 1.2 or BaliUV kernels to make your back up. They are smooth, fast and OC/UV-able. To flash just Wipe /cache, /dalvik -> flash kernel -> Wipe /cache, /dalvik (I also fix permissions too bc that is the way that I learned and I just do it that way all the time). Reboot and Bam!! you should be able to get to the point that you can make a backup.
Look in my signature, there are downloads and flashables that are direct download linked. There is also an ICS install guide that can help your journey. Once you have your backup, then use Odin from the Toolbox in my signature and flash back to stock JFD. From there you will be able to follow my guide.
If you need any files, just let me know and I will upload them when I get home (won't be until late though, i have plans right after work).
Using HB, can I choose any theme? I am not so acquainted with the Theme chooser and boot animation of my phone. I flashed a boot animation zip yesterday and it was stuck in "ANDROID" screen. So I have to flash again. I never used any boot animation and themes in my phone yet. I want to know about them.
Sent from my SGH-T959 using xda app-developers app
Wrong thread. Put that question in the Jelly Bean Banter thread. No need to hijack this thread until we get OP up and running.
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
maxpeet said:
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
Click to expand...
Click to collapse
Wrong they are not the same. cwm can do the work without a PC beside you can erase, back up , restore and flash, which make our life easier, heimdall or Odin ," I prefer odin "are the last option when you can't fix it with cwm
To fix your phone use Odin or heimdall and go back to stock don't worry all your files, photo, music, will be safe. Then
1 get root on you , if you don't how ask
2 get cWm
3 do a nandroid back up
4 have fun flashing all roms you want lol
Sent from my SGH-T989 using xda app-developers app
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Toast6977 said:
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Click to expand...
Click to collapse
do no check de re-partition button and use a .pit file follow this tutorial and you will be fine
http://forum.xda-developers.com/showthread.php?t=848737