Is there anything I can do with the OTKSL, SID, and MSID I got with my 3vo?
Related
I have a hero that has been flashed to cricket. talk & txt work perfectly... Was looking for programming phone codes... aka ##DATA#, ##DEBUG# and ##RTN#... is there any others? tryin to gain access to change setting under MMS Settings\ Connection Settings\ to be able to change the http://mms.sprintpcs.com to cricket settings... Any help would be great... thanks
Hopefully this is in the right place, but I cannot put it in a specific area since I am new to the forums. THANKS ALL!
HELP…
I need to enter my MSL to “fix” the SiriusXM app (or other streaming apps). Before I was able to use the instructions below. With this new rom (I am thinking any 2.3, but I am running Fresh EVO 2.3.3) , it takes the code, but nothing comes up. Does anyone have a work around???
1) Dial ##3282#
2) Choose Edit Mode
3) Enter MSL
4) Choose Advanced
5) Change HTTP PD Proxy Port to: 0 (old 8085)
6) Change HTTP PD Proxy Address to: 0.0.0.0 (old pd.vog.sprintpcs.com)
Same problem here. I've been looking for an alternate, but I haven't seen anything yet. Any one had any success getting into the MSL menu with 2.3???
Reading Msl
I saw the method for reading msl code via cdma workshop but the pics showed cdma ws 3.5 and i have 2.7 will that proccess still work
u can get the msl from programs like dfs tools cdma workshop and qpst as well as msl reader from the market but i always find it easier calling your carrier and telling them you want to do a data restore or something like that.
as for it not recognizing the ##codes the person who made the rom couldve taken the epst apk in order to save room.
Ok, I opened chat to sprint support and asked for msl code. They told me that my device doesn't have MSL but then gave me what they called a 6 digit security code to reprgram my phone. Is this security code the MSL and they just didn't want to tell me.
llcobbs said:
Ok, I opened chat to sprint support and asked for msl code. They told me that my device doesn't have MSL but then gave me what they called a 6 digit security code to reprgram my phone. Is this security code the MSL and they just didn't want to tell me.
Click to expand...
Click to collapse
yea thats probably it.
also, for anyone stuck in a 2.3 rom, try these codes
*#*#3282#*#* Data Restore
*#*#786#*#* Reverse Logistics Support (device wipe)
*#*#(your msl)#*#* reprogram phone # and msid
these are the codes we use at my store for the nexus s 4g. hope it helps
I have an issue. I have my msl and enter it. Using getprop (ril.MSL 123456) then use *#*#3282#*#* enter the msl. Always get invalid code. Using the number given to me by getprop.
Would being unrooted cause this?
Sent from my Nexus S 4G using XDA Premium App
Now it doesn't say invalid anymore after reboot. Now it just exits back out to menu to select what data setting I want to edit. I select wimax and it asks for msl again.type it back out to the menu I go.
Any suggestions?
Sent from my Nexus S 4G using XDA Premium App
hello any answers
Someone please read this!
Sent from my Nexus S 4G using xda premium
I have a 3vo flashed to metro and I'm having trouble getting it to connect to 3g. The place that flashed the phone did not repair the meid. But I'm not sure if they wrote a esn from a non 3g phone to mine when they houdinied it. When I read the nv items on qxdm the esn shows up but the checksum and eveywhere else is zeroed out. Di those need to match? Anyone familiar with this process please help I'm in a 3g area but cannot connect. And this 1x ia killing me. I just paid my bill and don't wanna go to boost if I don't have to. Thanks in advance
Shot from my Shoot3Rvo
Disclaimer, I'm not an expert and I have only done a handful of clones and conversions to other networks.
First does your phone make calls? If so meid/esn are ok. Since you have 1x that also shows your meid/esn are ok too.
You don't have 3G because they didn't enter the server information correctly or your HA Password or AAA pasword are wrong. Take the phone back and have them figure it out. I've always done it with a donor phone that worked completely on the network and I just copied over all the information with qpst or cdmaws to the new phone. Newer phones hide the HA and AAA passwords so using qpst/cdmaws cant retrieve them. If the donor phone is an android phone your can get the passwords using adb, logcat and go into ##data# and access the HA/aaa fields and the go back and search logcat for the passwords.
Start searching forums for retrieving HA/AAA passwords for the EVO 3D and also general activating on Boost/Cricket process. The process would be the same except with Metro you may not have to repair meid because their is houdini to insert the meid into the database. Find out what the programming settings are supposed to be and check them with qpst/service programming or go into ##data# check them there.
Good luck and happy reading.
Sweet thanks the the best feedback that I have recieved. The way the guides show is that for metro that the ha and spi are supposed to be the msl code but I have tried that among others. So maybe I need to be using the msl code that was used for the phone they houdini with. I don't know to much about using qxdm but the areas I do scan for meid and esn are all zeros or 0xFFFFFFF is that normal.
Shot from my Shoot3Rvo
I'm looking for the 21083 prl. Can someone point me in the right direction? Thanks.
Here you go. NOT flashable, extract the prl file.
http://db.tt/c717FNnb
sitlet said:
Here you go. NOT flashable, extract the prl file.
Click to expand...
Click to collapse
Sweet thanks.
Is there a tutorial to change this on the 3D?
1- Download the prl file and place it on the root of your sdcard
2- download Msl reader from the market
3- dial ##PRL# and enter your MSL password on a sense rom and make sure the EPST.apk app is present on the system/app with the right permission
4- on the list, Select the PRL/Press Menu/Commit.
5- reboot and enjoy..
im running 0001.prl and get great service..
I had my msl for my other 3D. Just got a new 1. MSL reader said my serial number wasn't present. And asked if my device was CDMA. Which it is.
I don't want to call Sprint for the MSL. But looks like I have to.
Anyone know of another way to get the MSL or about my error?
My PRL is 21085 in Sacramento CA
TrofeoSC said:
My PRL is 21085 in Sacramento CA
Click to expand...
Click to collapse
That's the new PRL. Which is what I have. And I'm getting awful data speeds.
Just got a new 3D. I was SOOO upset when the guy activated and upgraded everything right in front of me. I was like NOOO!
eyeisdasteve said:
I had my msl for my other 3D. Just got a new 1. MSL reader said my serial number wasn't present. And asked if my device was CDMA. Which it is.
I don't want to call Sprint for the MSL. But looks like I have to.
Anyone know of another way to get the MSL or about my error?
Click to expand...
Click to collapse
Do a chat with Sprint online. Their chat is outsourced to India, so it's fairly easy to just ask them for it, since they really have no clue what they are talking about.
eyeisdasteve said:
I had my msl for my other 3D. Just got a new 1. MSL reader said my serial number wasn't present. And asked if my device was CDMA. Which it is.
I don't want to call Sprint for the MSL. But looks like I have to.
Anyone know of another way to get the MSL or about my error?
Click to expand...
Click to collapse
MSL Reader requires root. You can also use cdma workshop to get your SPC.
louforgiveno said:
MSL Reader requires root. You can also use cdma workshop to get your SPC.
Click to expand...
Click to collapse
I am rooted.
Idk why but I just tried it again and it worked.
I'm trying to get around the sprint proxies and I have been able to change my RSTP address and port but cannot find the HTTPD settings in ##3282# to change those. I can see that it is installed to system/xbin but cannot view or edit. Any help will be greatly appreciated.
I am rooted with busybox installed and I have my msl/spc
Do you think sprint did away with the setting or found another way to throttle?
Dial ##3282#, edit, put msl code and then choose multimedia.
Only the rtsp settings are in there. That's the problem I've been having.