Got my new UK flyer today, it stated there was an update 23mb's that fixed speed ...
I installed it and now the update is stuck at the installing update screen (been there for about 15 mins...)
anyone else had this happen to them?
Will re-boot if it's still like this for another 5 or so... and pray it still works
Kris
On another note... how do i reset the thing? - since i have no other option? cant hit the power...
Kris
i00 said:
On another note... how do i reset the thing? - since i have no other option? cant hit the power...
Kris
Click to expand...
Click to collapse
I had the same problem after updating .....don't worry! It will take some times...for me was more than 10 minutes....
Related
Ok im not new to this flashing rom thing and ive been doing it for a while now but as of last night my phone randomly is rebooting i turn it on it works for a second and then reboots and then doesnt even get into the today screen just shows htc and reboots and reboots again i flashed to new rom did hard reset went back to original stock verizon rom and nothing any input would be awesome
bryanw17 said:
Ok im not new to this flashing rom thing and ive been doing it for a while now but as of last night my phone randomly is rebooting i turn it on it works for a second and then reboots and then doesnt even get into the today screen just shows htc and reboots and reboots again i flashed to new rom did hard reset went back to original stock verizon rom and nothing any input would be awesome
Click to expand...
Click to collapse
Try re-doing the bootloader. Sounds like a bad one. I've had that happen as well.
so should ijust reload hardspl 2.4 ? and then flash rom and what not ? cuz remember i cant get an active sync to run anything i can only get to the spl screen with the 3 colors it doesnt reboot there
bryanw17 said:
so should ijust reload hardspl 2.4 ? and then flash rom and what not ? cuz remember i cant get an active sync to run anything i can only get to the spl screen with the 3 colors it doesnt reboot there
Click to expand...
Click to collapse
hmm.... does it at least attempt an activesync connection? Does it stay in long enough? What I've done... is gotten RomUpdateUtility all the way to the last screen... and clicked next as soon as activesync sees it.
so.. i updated the hard spl and nothing it still restarts
bryanw17 said:
so.. i updated the hard spl and nothing it still restarts
Click to expand...
Click to collapse
Only suggestion left is to start over.... flash a different radio / rom... and then flash back.
did it twice i called verizon im getting a new one ty for the help tho
bryanw17 said:
did it twice i called verizon im getting a new one ty for the help tho
Click to expand...
Click to collapse
I take it you did a Lost / stolen phone? Or is it a replacement from verizon because it isn't working?
its under warranty so its free
Gotcha. I'm guessing they are making you send the old one back.
Dear all
Hi
Two days ago i connect my mozart in the zune. It was asking for update (latest release). I done the update from zune. It was installed succesfully, then zune restart my mozart and it never start again. It showing only the HTC logo and it vibrates 7-8 times. nothing else.
I can not used bootloading menu (no USB) because i already bricked my mozart..
Any ideas?
I beleive i can not do anything for the moment!!!!!!
Hello.
Have you try a simple Hard Reset?
I do it after a "7740 cab update failed" and it worked.
But don't know with a zune update.
Yes. but still its not working.
thanks
shutdown phone
press hold + volumn and - volumn then press power
your phone will to go page
"This operation will 1.delete all your personal data...."
press - volumn to restore manufacturer default
Yes. but still its not working.
thanks
savvasn said:
Yes. but still its not working.
thanks
Click to expand...
Click to collapse
it's still not working because OS is not complete.
One way solution is find fix store with have jtac to flash new bootloader in your phone again.
mozart
cyclonemon said:
it's still not working because OS is not complete.
One way solution is find fix store with have jtac to flash new bootloader in your phone again.
Click to expand...
Click to collapse
i have done all with riff box but not succsess ,i thing there is any hardware problem ?
hemmobile said:
i have done all with riff box but not succsess ,i thing there is any hardware problem ?
Click to expand...
Click to collapse
I have the same problem, have you fixed your mozart? Can you tell me how or where to go to find solution? Please
Hey there, I have the exactly same problem at one of my phones.
Is there no help? I hope there is.
I have two HTC 7 Mozarts at home, the one with a broken display and the one with the broken whatever (vibrates 7-8 times, too).
So today I swapped the display from the one with the broken rom (I guess) to the other one and:
a) it worked!
b) I saw the SD card slot!
So my question is: can't you do anything with the sd card against that problem?
It would be nice if we could!
Greetings!
htc 7 mozart vibrates 7 times
savvasn said:
Dear all
Hi
Two days ago i connect my mozart in the zune. It was asking for update (latest release). I done the update from zune. It was installed succesfully, then zune restart my mozart and it never start again. It showing only the HTC logo and it vibrates 7-8 times. nothing else.
I can not used bootloading menu (no USB) because i already bricked my mozart..
Any ideas?
I beleive i can not do anything for the moment!!!!!!
Click to expand...
Click to collapse
i am too having the same problem but luckly it gt started 2 times...bt goes down again once when i opend the camera and 2nd time when i connect to wifi....
i can use bootloader
bt cnt flash the rom either....
have anyone found the solution...is it hardware problem or OS
please help me out with this..
thankyou
Niroj
did anyone find a solution to this? my mozart just decided to other day to do this,
Ive installed different bootloader and a custom rom, still stuck
Soo frustrating
cheers,
Cam
Updated to ICS last night and everything worked smoothly. I shut down the device and then started it an hour later and even though it started the touchscreen did not worked. So I forced it to restart by holding down power and vol + button. It restarted but now I just get a "gears screen" and nothing works. If I put the tablet in Portrait mode, I can see the wallpaper in the back but I still cannot get to it. I have already tried "reset" but nothing happens.
Any suggestion?
http://forum.xda-developers.com/showthread.php?t=1437607
vakbrain said:
http://forum.xda-developers.com/showthread.php?t=1437607
Click to expand...
Click to collapse
Saw that thread but it does not apply to me. I have never rooted TP. It was stock and I did not remove any bloatware/apps either.
vakbrain said:
http://forum.xda-developers.com/showthread.php?t=1437607
Click to expand...
Click to collapse
Different issue entirely.
Unfortunately I think you have a brick. There were other threads regarding this very same issue after the .33 update, don't know if it was resolved any other way than sending the unit back.
Try letting the battery completly drain, and then charge it and power on the tablet. This should hopefully solve your problem.
So what's the best way to drain the battery, without it even working?
Posted via the Samsung Galaxy S™ II Skyrocket™ using xda premium.
Once Asus release the zip update file, just download it and manually update.
place the update.zip on the root of your MicroSD card and turn the device off.
Power + Vol down .. then Vol up when the writing appears.
How long does that usually take Asus? I am running close to my return window at Best buy.
Posted via the Samsung Galaxy S™ II Skyrocket™.
No idea, but it will be listed here ftp://ftp.asus.com.tw/pub/ASUS/EeePAD/TF201
youll need the US version 4.0.3 ...when its available.
Failing that, someone has uploaded the OTA version (its in the dev section) but i dont know if you can just flash that .. ?
EDIT **
I would ignore the OTA update in the dev section as i've just read through it and it doesnt seem like itll be of any use ...
Can I just go back to HC and then do an OTA update to ICS.
Posted via the Samsung Galaxy S™ II Skyrocket™.
ajamils said:
Can I just go back to HC and then do an OTA update to ICS.
Posted via the Samsung Galaxy S™ II Skyrocket™.
Click to expand...
Click to collapse
Its worth a try ... but i dont think itll let you flash an older version. I could be wrong though..
8.8.3.33 -
ftp://ftp.asus.com.tw/pub/ASUS/EeePAD/TF201/UpdateLauncher_US_epaduser8_8_3_33.zip
Is there a way to drain the battery faster ?
Danny-B- said:
Its worth a try ... but i dont think itll let you flash an older version. I could be wrong though..
8.8.3.33 -
ftp://ftp.asus.com.tw/pub/ASUS/EeePAD/TF201/UpdateLauncher_US_epaduser8_8_3_33.zip
Click to expand...
Click to collapse
You can revert to .33
Sent from my Inspire 4G with ICS!
dsmitty166 said:
You can revert to .33
Sent from my Inspire 4G with ICS!
Click to expand...
Click to collapse
Is there a mirror for downloading that file? Asus servers are horrible, the download has been running for more than an hour and still shows that I have 2 more hours to go..... WTF !!
OK I did the following and still no luck.
- Downloaded 8.8.3.33 firmware
- Extracted and copied the zip to the root of SD
- Powered TP with Power Button + Vol-. Got the recovery message but after that I got an icon that looked like it was loading something but then I got another icon. (see pics)
Any suggestion?
ajamils said:
OK I did the following and still no luck.
- Downloaded 8.8.3.33 firmware
- Extracted and copied the zip to the root of SD
- Powered TP with Power Button + Vol-. Got the recovery message but after that I got an icon that looked like it was loading something but then I got another icon. (see pics)
Any suggestion?
Click to expand...
Click to collapse
Sorry i think your just gunna have to wait for the ICS zip ...
Danny-B- said:
Sorry i think your just gunna have to wait for the ICS zip ...
Click to expand...
Click to collapse
Talked with Asus tech and they just told me to send the Tablet back to service center for repair
My best guess is that you turn on with power+vol down and then from that menu select the factory reset option.
I believe it is:
PWR + VOL DWN
VOL DWN (to change from boot to system wipe)
VOL UP (to confirm system wipe)
I'll confirm shortly, I'm copying a file right now.
jfortier777 said:
My best guess is that you turn on with power+vol down and then from that menu select the factory reset option.
I believe it is:
PWR + VOL DWN
VOL DWN (to change from boot to system wipe)
VOL UP (to confirm system wipe)
I'll confirm shortly, I'm copying a file right now.
Click to expand...
Click to collapse
Yes, you are correct. I was not doing the correct button combination. I finally got it to wipe data but after the reboot, I still get the same screen (gears with exclamation mark).
After the wipe, I tried doing the the downgrade again but ended but with the same screen of downed android with an exclamation mark.
ajamils said:
Yes, you are correct. I was not doing the correct button combination. I finally got it to wipe data but after the reboot, I still get the same screen (gears with exclamation mark).
After the wipe, I tried doing the the downgrade again but ended but with the same screen of downed android with an exclamation mark.
Click to expand...
Click to collapse
I'm at a loss, keep trying stuff until something sticks or resign yourself to a swap.
At this point there isnt really any harm you can do.
Hi all, I have just flashed my XS with the CH 4.0.4 .ftf file, and after about 10 minutes of use, the phone is VERY hot!
Has anyone else noticed this yet?
Sounds like something hung up, might be MediaScanner...
Try to reboot or even better, shutdown, wait a couple of seconds, then reboot.
Thank me later mate
Or do a factory reset.
Kh0rdan said:
Sounds like something hung up, might be MediaScanner...
Try to reboot or even better, shutdown, wait a couple of seconds, then reboot.
Thank me later mate
Click to expand...
Click to collapse
Thanks!
Schoolboy error....
Kindly discuss all general matters/issues/bugs regarding the new update here.
Thank you in advance!
I installed the black update for my 920 & afterwards it completely froze up at the lock screen. So I rebooted it using the held down power button & down volume key method & the same thing happened & kept happening no matter how many times I tried this. So I tried powering it off in small moment it was active & the same thing happened it froze on shutdown with the goodbye message now permanently stuck on the screen.
Anyone know how I can recover my 920 in these circumstances?
Super Chimp said:
I installed the black update for my 920 & afterwards it completely froze up at the lock screen. So I rebooted it using the held down power button & down volume key method & the same thing happened & kept happening no matter how many times I tried this. So I tried powering it off in small moment it was active & the same thing happened it froze on shutdown with the goodbye message now permanently stuck on the screen.
Anyone know how I can recover my 920 in these circumstances?
Click to expand...
Click to collapse
yes... flash it again...
easy way is with NSU
http://nds2.fds-fire.nokia.com/fds_fire/1310/0909/7297834135/NokiaSoftwareUpdaterForRetail_4.1.0.exe
hope you backup your data from phone before...
dxdy said:
yes... flash it again...
easy way is with NSU
http://nds2.fds-fire.nokia.com/fds_fire/1310/0909/7297834135/NokiaSoftwareUpdaterForRetail_4.1.0.exe
hope you backup your data from phone before...
Click to expand...
Click to collapse
Thanks for the link.
I wondered why it happened is the install corrupted?
maybe some error on memory or maybe battery is low and during flashing shut down phone... this happened to some people...
Super Chimp said:
I installed the black update for my 920 & afterwards it completely froze up at the lock screen. So I rebooted it using the held down power button & down volume key method & the same thing happened & kept happening no matter how many times I tried this. So I tried powering it off in small moment it was active & the same thing happened it froze on shutdown with the goodbye message now permanently stuck on the screen.
Anyone know how I can recover my 920 in these circumstances?
Click to expand...
Click to collapse
if you did the OTA update, after the first reboot, it then loads the initial lock screen, you should have been able to unlock it. At this point you'll get a screen that says "migrating data" This usually takes about 5-10 minutes depending on how much storage you have in use. Then it reboots again and you're up an running.
May have just been a bad / corrupt file, but the manual flash should fix everything.
I wonder if it was because I got a service message from my network at the same time as it saw it as a new handset.
Sorry for the double post but just to say NSU did the trick oddly it didn't install the latest software as afterwards it was still saying there was an update to install on the phone update on the phone itself. Would think this update would come from the same servers.
Guys can yo tell me what are the differences between plain custom ROM and Roger's ROM..
Well I tried to do the update twice more with the same result each time.
Anyone any ideas on this?
Super Chimp said:
Well I tried to do the update twice more with the same result each time.
Anyone any ideas on this?
Click to expand...
Click to collapse
Do you update the device while charging the phone?
Sent from my GT-I9500 using Tapatalk 4
milton.bain said:
Do you update the device while charging the phone?
Sent from my GT-I9500 using Tapatalk 4
Click to expand...
Click to collapse
No. Unless you count any slow trickle charge from the PC whilst flashing. TBH because of all the reboots I had lost track of the battery charge on the last flashing attempt.
Latest is on the latest flashing attempt it updated it to Black over NSU. Some of the apps seem OK, some open but freeze & others such as the camera & messaging seem to be missing. Also every time I turn it off it freezes up & has to be rebooted.
Just what is going on with it?
Is there anyway of getting the NSU to re-install the Amber software rather than keep trying to upgrade to the Black version?
Super Chimp said:
Sorry for the double post but just to say NSU did the trick oddly it didn't install the latest software as afterwards it was still saying there was an update to install on the phone update on the phone itself. Would think this update would come from the same servers.
Click to expand...
Click to collapse
Yes it may be that you were no outdated. NSU re-install the latest version available of your Hard Product Code of your device, since/from the Nokia Server. But that does not mean that you have the latest update as Lumia Black, for example.
Abhishek606 said:
Guys can yo tell me what are the differences between plain custom ROM and Roger's ROM..
Click to expand...
Click to collapse
Roger's is the official rom for devices sold by Roger's, custom is the rom developed by people unofficially authorized by Micro$soft or Nokia.