Related
I am not the developer of this app neither I am a developer, however, I foundit to be very usefull and would like to share it.
The app is called SetXperia and can be downloaded for free from the Market.
This app is a modification made by another dev of an app called SetVsel so that it is optimized for Xperia Devices.
While it is not mentioned in the compatible devices list it works like a charm in my X10i with FreeKernel.
The main purpose of the app is to control CPU speed and voltages. Some of the features don't work, but hopefully our devs will take advantage of this app while overclocking our devices.
If you find this post useful please click the "Thanks" button.
This must be in 'themes and apps section'...
sahibunlimited said:
This must be in 'themes and apps section'...
Click to expand...
Click to collapse
I posted it here since its an app to help us with Overclocking which relates directly to development. However, I wouldn't mind if the thread is moved to the Themes and Apps section but I think it will not get attention from the devs if not posted here.
Did you get to try the app? what do you think about it?
---- removed ----
It's from Inteks made for Xperia Arc!
Thread can be found here:
http://forum.xda-developers.com/showthread.php?t=1242133
Oh, and i've had a little problem, this app set Max and Min Speed to 128mhz when screen is off. Some1 else has this problem? (WB4.0.4 DKv4a)
This apps function similar setcpu, but it is downgrade version.
Haldi4803 said:
It's from Inteks made for Xperia Arc!
Thread can be found here:
http://forum.xda-developers.com/showthread.php?t=1242133
Oh, and i've had a little problem, this app set Max and Min Speed to 128mhz when screen is off. Some1 else has this problem? (WB4.0.4 DKv4a)
Click to expand...
Click to collapse
I had the same problem...so i advice not to use it..its hell to remove the app @ 128 mhz
Haldi4803 said:
It's from Inteks made for Xperia Arc!
Thread can be found here:
http://forum.xda-developers.com/showthread.php?t=1242133
Oh, and I've had a little problem, this app set Max and Min Speed to 128mhz when screen is off. Some1 else has this problem? (WB4.0.4 DKv4a)
Click to expand...
Click to collapse
Just make sure you create a profile with the appropriate speed before applying the new settings.
I find this app to be very useful since it lets me set the voltages for each supported processor speed.
Sorry to read it didn't work for you.
it should run smooth now check the updated version in the market
http://forum.xda-developers.com/showthread.php?t=1269698
This app allows you to control your CPU voltages with an easy to use interface. You can increase or decrease voltages (undervolt or overvolt) for all frequencies or fine tune voltages for each individual frequency.
! HTC DEVICES !
! ROOT is Required !
! Kernel that supports HAVS or SVS voltage adjustment REQUIRED !
In addition, if you are an Incredikernel user, the app may also be used to toggle Incredikernel specific features on and off, namely USB fast charging and audio boost.
Get it over at http://www.incredikernel.com
IncrediControl is now also available in the market:
IncrediControl (If you have a dual core CPU do not use the market version until v1.5 final is released)
IncrediControl - Ad Free
Additionally, all donators are eligible to receive the Ad Free version. It doesn't matter how much or how little you donate or have donated. If you don't want to purchase the app from the market, you may donate using the button on this page. Please register on the site first and include your username in the comments box.
All previous donators, please register on the site if you have not done so and contact me with your username!
NOTE: It is a requirement of the HAVS adjustment that the kernel you are using has the HAVS sysfs interface implemented. If it does not, it will not work.
NOTE2: Before using, please delete any boot scripts you may have in /etc/init.d that toggle any of the settings this app controls.
Get it at http://www.incredikernel.com
Restore script - use this if you went too low and find yourself in a boot loop. Flash through recovery:
http://www.incredikernel.com/?p=229
IncrediControl v1.5 beta1:
This is an open beta of the latest IncrediControl. Changes include:
Dual core snapdragon(msm8x60) support
CPU frequency adjustment
Ability to tweak various CPU governors
Numerous bug fixes
Please test and report any bugs in the forum. I have not yet implemented the ability to set governor settings or CPU frequencies on boot. This will be implemented before the final release so please do not report this as an issue.
http://www.incredikernel.com/?p=419
IncrediControl v1.5 beta2:
Fixed compatibility with some msm8x60 kernels
http://www.incredikernel.com/?p=422
IncrediControl v1.5 Beta3:
Ability to set cpu and governor settings on boot
Updated support for Incredikernel Rezound
http://www.incredikernel.com/?p=430
Any chances of a kernel to go along with this? Ziggy's didn't like my phone and I always liked your's on my old incredible
sent from my newly unlocked Rezound
Using Ziggy's kernel. App works good, but FCs on click of the SVS portion? hmm
Izeltokatl said:
Using Ziggy's kernel. App works good, but FCs on click of the SVS portion? hmm
Click to expand...
Click to collapse
It might be a permissions thing. I tested on my own internal build. I'll look into it.
New beta posted that fixes compatibility with ziggy's kernels.
Thanks
Thanks for releasing app so fast Chad.
I enjoyed your work on my Incredible and I look forward to your work on the Rezound.
The app makes my life easier, and I've been tweaking it down bit by bit to see how much I can get this phone to sip.
Do you have any plans to do kernels? I'm using Ziggy's which seems to be running fine now (although i had a reboot earlier, but who knows why that happened).
I ran just your kernels religiously on my Incredible and enjoyed the performance and stability.
Regardly, thanks again for all the work you do bro.
Works great!
I would recommend for the Rezound screen size to make the buttons a tad wider. They are rather tiny on this screen and sometimes when i click the voltage adjustment button I click on the value input and go into keyboard entry mode. I have rather smaller hands so i would imaging its more annoying for bigger people.
other than that, great job.
Awesome app. I didn't know you had incorporated cpu controls into it
sent from my newly unlocked Rezound
is the default setting the default setting for HTC Rezound without ANY modification?
dccoh said:
Thanks for releasing app so fast Chad.
I enjoyed your work on my Incredible and I look forward to your work on the Rezound.
The app makes my life easier, and I've been tweaking it down bit by bit to see how much I can get this phone to sip.
Do you have any plans to do kernels? I'm using Ziggy's which seems to be running fine now (although i had a reboot earlier, but who knows why that happened).
I ran just your kernels religiously on my Incredible and enjoyed the performance and stability.
Regardly, thanks again for all the work you do bro.
Click to expand...
Click to collapse
I get random reboots on Ziggy's no matter what governor and clock speed.
It wipes dalvik cache when it happens too.
If i do a set cpu stress test, and let it sit there, eventually the freeze/reboot happens.
Something about how it's written.
pkopalek said:
I get random reboots on Ziggy's no matter what governor and clock speed.
It wipes dalvik cache when it happens too.
If i do a set cpu stress test, and let it sit there, eventually the freeze/reboot happens.
Something about how it's written.
Click to expand...
Click to collapse
I get it random reboots too, I tried many ROMs out and i still get them. The conclusion I get from it is that we have bad chips.
Ziggy mentioned it had something to do with the cache getting corrupted. Im wondering if regularly clearing it would prevent bootloops from happening
sent from my newly unlocked Rezound
pagereborn said:
is the default setting the default setting for HTC Rezound without ANY modification?
Click to expand...
Click to collapse
The default voltages are whatever the kernel default voltages are.
Sent from my ADR6425LVW using XDA App
Hey Chad, I shot a pm your way.
Can I download these from my computer, transfer to my sd card and go, or do I have to boot it into recovery and go through another process, thanks in advance.
You install them side loaded. no flashing
Sent from my ADR6425LVW using XDA App
dccoh said:
Hey Chad, I shot a pm your way.
Click to expand...
Click to collapse
Back at you
Izeltokatl said:
You install them side loaded. no flashing
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Will they show as an app? I am running ziggys kernel, have installed this a couple of times and nothing ever shows up, what should I do?
Anyone know what's the default setting for rezound without any modifications?
Sent from my ADR6425LVW using xda premium
I'm pretty sure this has been answered before but I cannot find it ANYWHERE (Redirect me if I'm wrong. I've played FPS games like NOVA and modern combat perfectly unrooted. Suddenly the controls stopped working (Multi touch issue I suppose). I have the phone rooted now and it still doesn't work.
I've heard that GO locker EX messes with them but I've uninstalled it with no luck.
Here are my device specs in case it helps
-Amaze 4G
-Tmobile
-Rooted (ICS rom)
Post any other info you need and thanks in advance!
Darkflydra said:
I'm pretty sure this has been answered before but I cannot find it ANYWHERE (Redirect me if I'm wrong. I've played FPS games like NOVA and modern combat perfectly unrooted. Suddenly the controls stopped working (Multi touch issue I suppose). I have the phone rooted now and it still doesn't work.
I've heard that GO locker EX messes with them but I've uninstalled it with no luck.
Here are my device specs in case it helps
-Amaze 4G
-Tmobile
-Rooted (ICS rom)
Post any other info you need and thanks in advance!
Click to expand...
Click to collapse
This has been discuessed and seems to be a common problem on rooted phones. As soon as you go back to stock they start working again!! I'm rooted stock and have multitouch issues. My dad's amaze is complete stock locked and unrooted multitouch works perfectly. A developer should look into this.
As I've said, I've had the problem even before rooting my phone.
Sent from my HTC_Amaze_4G using XDA App
works here and I'm rooted
heyodee said:
works here and I'm rooted
Click to expand...
Click to collapse
It seems to a problem on some roms and not others If I remember correctly from older threads. I remember reading beastmod was working perfectly, I havn't heard anything about other roms, what rom are you running heyodee?
seansk said:
It seems to a problem on some roms and not others If I remember correctly from older threads. I remember reading beastmod was working perfectly, I havn't heard anything about other roms, what rom are you running heyodee?
Click to expand...
Click to collapse
Stock Deodex tmobile 1.43.531.3
heyodee said:
Stock Deodex tmobile 1.43.531.3
Click to expand...
Click to collapse
hmm odd...I notice when I restart my phone I run multitouch app to test the multitouch and all 4 points (maximum for amaze) register perfectly, after about a minute or so the 4th point does not register correctly anymore...if I play around with it too much all points but 1 stop registering!!...could be a rogue app or part of the rom!! I will have to investigate more
seansk said:
hmm odd...I notice when I restart my phone I run multitouch app to test the multitouch and all 4 points (maximum for amaze) register perfectly, after about a minute or so the 4th point does not register correctly anymore...if I play around with it too much all points but 1 stop registering!!...could be a rogue app or part of the rom!! I will have to investigate more
Click to expand...
Click to collapse
Probabaly a ROM or kernel... MC3 is hot
Did you restart the phone after disabling Go Locker? That did the trick for me.
craigtut said:
Did you restart the phone after disabling Go Locker? That did the trick for me.
Click to expand...
Click to collapse
hmm...could be the launcher...I run ADW ex...and widget locker, i'm going to disable and see if i get the 4 points...btw heyodee have you actually tested to see if you get 4 solid points with a multitouch app?
update: yep widget locker is the culprit!!!
seansk said:
hmm...could be the launcher...I run ADW ex...and widget locker, i'm going to disable and see if i get the 4 points...btw heyodee have you actually tested to see if you get 4 solid points with a multitouch app?
Click to expand...
Click to collapse
link me the app
heyodee said:
link me the app
Click to expand...
Click to collapse
https://market.android.com/details?id=com.the511plus.MultiTouchTester&hl=en
Tried it, all four points working
heyodee said:
Tried it, all four points working
Click to expand...
Click to collapse
awesome thanks...running any launchers or lockscreen apps??? I think i've narrowed mine down to lockscreen widget....but I have to see...
I did a bit of research and any lock screen replacement app causes these multi touch issues on at least a few if not all phones. I don't think the launchers mess it up at all.
Sent from my HTC_Amaze_4G using XDA App
craigtut said:
I did a bit of research and any lock screen replacement app causes these multi touch issues on at least a few if not all phones. I don't think the launchers mess it up at all.
Sent from my HTC_Amaze_4G using XDA App
Click to expand...
Click to collapse
I think so too...as soon as i lock my phone and unlock the points gets messed up...but if I don't lock my phone via widgetlocker, the four points stay solid...I'm disabling widgetlocker and restarting, i will post my results, if that doesn't work I will uninstall and restart then post my results!!
seansk said:
awesome thanks...running any launchers or lockscreen apps??? I think i've narrowed mine down to lockscreen widget....but I have to see...
Click to expand...
Click to collapse
Using default sense launcher and lock screen
yes definitely widgetlocker. 100 percent sure now, been testing since...I will post this in my stickie!!! seems people have problems with this a lot!!
Okay, I'm uninstalling ALL traces of lock screen apps and I'll post the results before and after.
BEFORE: Unresponsive as usual. Frequent jerking motions. Strange enough, with one finger it works fine but with two it starts to ignore my input
Darkflydra said:
Okay, I'm uninstalling ALL traces of lock screen apps and I'll post the results before and after.
BEFORE: Unresponsive as usual. Frequent jerking motions. Strange enough, with one finger it works fine but with two it starts to ignore my input
Click to expand...
Click to collapse
restart your phone!
Just wondering what apps I can use to improve the performance of my YPG1 US version without installing a ROM. I have installed a couple roms before but was a bit frustrated by losing certain functions and one of them actually made it slower.
Device is rooted atm but only rooted apps I think are SetCPU, AdFree, and Superuser.
I use it mainly for video and reading so I would love to be able to change the brightness from the dropdown menu. I also have a problem with XBMC crashing when I use the Navi-X program most of the time or going very very slowly when running Navi-X so would love to be able to use that, I think it has to do with ram usage even though I don't have that many background apps running.
Sportfreunde said:
Just wondering what apps I can use to improve the performance of my YPG1 US version without installing a ROM. I have installed a couple roms before but was a bit frustrated by losing certain functions and one of them actually made it slower.
Device is rooted atm but only rooted apps I think are SetCPU, AdFree, and Superuser.
I use it mainly for video and reading so I would love to be able to change the brightness from the dropdown menu. I also have a problem with XBMC crashing when I use the Navi-X program most of the time or going very very slowly when running Navi-X so would love to be able to use that, I think it has to do with ram usage even though I don't have that many background apps running.
Click to expand...
Click to collapse
Just a heads up, but have you tried REDD? It is literally a modified version of our stock rom, and you don't lose any functions.
Firstly, you can install a custom kernel if you want. It does help with performance (you get a boost in available ram), and will give you more options with setCPU. Now if you don't want to install anything then you can still setup your min frequency to at least 400 mhz, and keep max at 1000mhz on setCPU. This should keep things zippy.
Another thing you can do is change out the launcher. Many people don't realize this, but using a different launcher can vastly increase the performance of pretty much any android device. I recommend using Holo Launcher, since it is light on ram, and gives a pretty decent performance boost. However, many people love ADW Launcher https://play.google.com/store/apps/details?id=org.adw.launcher&hl=en, or Launcher Pro https://play.google.com/store/apps/details?id=com.fede.launcher&hl=en so if you haven't changed out your launcher then try that as well.
Our players have a knack for using too much ram. For some reason, it may say you don't have that many background apps running but you actually do (you just can't see them in the task manager). For me, I found an app called auto memory manager https://play.google.com/store/apps/details?id=com.lim.android.automemman&hl=en. This app is really simple to use. Basically you set a threshold for each category of apps, and once the available ram goes under that threshold it automatically frees up ram. When I was running it on REDD I almost always had 100mb-150mb free. It kept my device very smooth. I still use it on the JB roms. I had mine set like this 40, 70, 100, 120, 140, 160.
Along with auto memory manager, you can also install clean master https://play.google.com/store/apps/details?id=com.cleanmaster.mguard&hl=en, it's pretty much the ccleaner of android. It cleans up junk files that clutter up your device, and you can also set it to free up ram along with auto memory manager. It works awesome.
You say you want to still be able to hange the brightness from the dropdown? There's an app for that lol. Notification Toggle https://play.google.com/store/apps/details?id=de.j4velin.notificationToggle&hl=en, is pretty much like power toggles on other roms. I have to say it doesn't look exactly like that on GB (that's what it looks like on ics+ roms). It looks like this; You can set this up almost anyway you like and add almost any toggles you want
Hope this helps.
I think you should try an app called Greenify that is available on the Play Store. It "hibernates" apps that are not running so those apps won't run in the background and take up valuable ram or drain your precious battery. (You can pick what apps you want to hibernate)
You should try it out
Sent from my YP-G1 using xda app-developers app
Think I'm gonna install that notification toggle along with a kernel. Can anyone recommend which kernel would improve performance the most (ignore battery life).
Sportfreunde said:
Think I'm gonna install that notification toggle along with a kernel. Can anyone recommend which kernel would improve performance the most (ignore battery life).
Click to expand...
Click to collapse
To be honest they are all about the same performance wise. I went with Klin's R3 kernel, because for me Terrasilent was giving me an issue where it would boot into recovery, and wipe all my data.
You do not need to install anything in order to be able to adjust the brightness from the dropdown menu. I only know for sure that this works on the yp-g1( stock rom), and that it does not work on yp-g70. Other models I do not know about.
All you have to do is when you put your finger on the top of the screen as if pulling down the menu, just press and hold until the shade that pops up dissapears, at wich point you can slide your finger left or right to decrease or increase the brightness. Hope this helps.
AEVAREX said:
You do not need to install anything in order to be able to adjust the brightness from the dropdown menu. I only know for sure that this works on the yp-g1( stock rom), and that it does not work on yp-g70. Other models I do not know about.
All you have to do is when you put your finger on the top of the screen as if pulling down the menu, just press and hold until the shade that pops up dissapears, at wich point you can slide your finger left or right to decrease or increase the brightness. Hope this helps.
Click to expand...
Click to collapse
Wow thanks that worked. It doesn't adjust it through the full range I think but that's nice and easy, I couldn't get the toggle thing working.
Think I am gonna put a kernel in though to try and avoid Dolphin or XBMC from crashing so often.
Awesome post
Sent from my YP-GI1 using xda app-developers app
This is a port (to Android Wear) of 'Kernel Audiutor' app by @Grarak
-- a kernel control app with many useful functions --
So all credits go to @Grarak
Informations for the source app in @Grarak 's xda-original-thread here
Download:
initial wear-version 0.9.4.2.2beta
on android file host
This APP wants to have busybox installed!
You can install 'Busybox on rails' from playstore... Works fine with wear!
(Install it via adb)
Installation:
atm only via adb(!):
Code:
./adb install -r ./KernelAudiutor4Wear.apk
an installer app for mobile devices is in the work...
attached screenshots:
reserved by OP
reserved by OP
Great work, really useful and the layout is ok on my G Watch with 5.1.1w but there's a small bug: if you don't have busybox installed (I forgot to flash the zip after I had to restore because I managed to mess something up) it will FC before starting and telling you that busybox is not installed.
You can install 'Busybox on rails' from playstore... Works fine with wear!
(Install it via adb)
No flashing a ZIP is needed that way...
bitstra said:
You can install 'Busybox on rails' from playstore... Works fine with wear!
(Install it via adb)
No flashing a ZIP is needed that way...
Click to expand...
Click to collapse
Well that is true but busybox on rails seems to be missing some commands (one of them being clear and I do use it in most of my scripts just to make it look clean) and I'm also not so sure if the busybox version it installs is compiled with SELinux support and I already have the zip on the watch so that's not a problem, I was just reporting about the app giving a FC, I can uninstall busybox and grab a log of the FC if you would like me to.
Great app thank you!
Wooooow!!
If this app will be a donate only version I will surely buy it!
Awesome work! I've set my SWR50 5.1.1 to 1CPU - NOOP and it's lasting almost a day extra with one charge, that is up to 3 days full!
Keep up the amazing work!
Amazing, a must have. I was using "device control" from playstore, but this is sooo better
Curious if you have any input on using this with a rooted Moto 360. It seems to launch just fine, but there's a white bar that goes horizontally across the bottom and blocks about 1/4 of the screen, so when you select things such as the cpu speed, the top numbers on the scrollable list cannot be seen. One you swipe as if you're going to close the app, you can see what's behind it. Do you know if this app will allow the settings to stick with a Moto 360? Thanks for the help!
bitstra said:
reserved by OP
Click to expand...
Click to collapse
Is it normal that only 1 of the 4 cores is enabled by default? I see it on your screenshot as well. However, I don't understand why it would be disabled. Why put 4 core cpu into watch if they don't intend to use all cores?
Also, I recommend using smaller density. Mine is set to 200 on galaxy gear live.
Ad1982 said:
Curious if you have any input on using this with a rooted Moto 360. It seems to launch just fine, but there's a white bar that goes horizontally across the bottom and blocks about 1/4 of the screen, so when you select things such as the cpu speed, the top numbers on the scrollable list cannot be seen. One you swipe as if you're going to close the app, you can see what's behind it. Do you know if this app will allow the settings to stick with a Moto 360? Thanks for the help!
Click to expand...
Click to collapse
I'working in changes for round watches...
Can try it only in emulator, because I own a LG g watch only
aligatro2010 said:
Is it normal that only 1 of the 4 cores is enabled by default? I see it on your screenshot as well. However, I don't understand why it would be disabled. Why put 4 core cpu into watch if they don't intend to use all cores?
Also, I recommend using smaller density. Mine is set to 200 on galaxy gear live.
Click to expand...
Click to collapse
Thenonly one core thing depends on governor. Try another one if it will work with 2 vor more ...
bitstra said:
I'working in changes for round watches...
Can try it only in emulator, because I own a LG g watch only
Click to expand...
Click to collapse
No worries, if you need help testing on the Moto 360, let me know, I can side-load a beta version. It's strange, because that white bar goes away as soon as you start to swipe the app as if you were closing it...
bitstra said:
Thenonly one core thing depends on governor. Try another one if it will work with 2 vor more ...
Click to expand...
Click to collapse
I selected "performance" governor and it still only uses 1 cpu core unless I specifically click to enable other cores. Even pushed cpu to 100% cpu load using infinite loop script and it still only using one core. Which governor is supposed to activate other cores?
Ad1982 said:
No worries, if you need help testing on the Moto 360, let me know, I can side-load a beta version. It's strange, because that white bar goes away as soon as you start to swipe the app as if you were closing it...
Click to expand...
Click to collapse
Please do me a favour,
Try to disable Beta-Informations under KernelAudiutor-Menu->Settings->Beta-Information; and have a look if the white bar problem is gone...
I think it's a dimension problem with Beta User PopUp Panel...
aligatro2010 said:
I selected "performance" governor and it still only uses 1 cpu core unless I specifically click to enable other cores. Even pushed cpu to 100% cpu load using infinite loop script and it still only using one core. Which governor is supposed to activate other cores?
Click to expand...
Click to collapse
What watch model / ROM / kernel do you run?
bitstra said:
What watch model / ROM / kernel do you run?
Click to expand...
Click to collapse
Samsung Gear Live
ROM
Stock LDZ22J (5.1.1)
Kernel
bitstra said:
Please do me a favour,
Try to disable Beta-Informations under KernelAudiutor-Menu->Settings->Beta-Information; and have a look if the white bar problem is gone...
I think it's a dimension problem with Beta User PopUp Panel...
Click to expand...
Click to collapse
I did try that, but it is still there. I turned off most of the options on the settings page with no difference.
Hey! Would that work on our android wear Gear 2?