Hello,
I need help here. Everytime I flash ANY new rom then when I connect my usb it won't do anything,it doesn't ask if I want to mount,charge or whatever and my pc does not recognize it asking for a driver, but when I am on SE stock rom it works fine and it's pure annoying me.
[The only way it detects my phone is on xrecovery and pressing mount usb storage]
I reinstalled PC companion and nothing.it just says there is an update and asks me to do it and it takes ages..
you should shutdown your phone and press back button and connect your phone to computer...
zjhjack123 said:
you should shutdown your phone and press back button and connect your phone to computer...
Click to expand...
Click to collapse
No, that is not the problem even if I do that it will just boot normally.I tried connecting it to another pc and it recognizes it OK also installs the drivers.
The other pc is W7 32 bit, mine is 64.I think I have a problem with the usb's drivers but I can't figure it out yet how to solve it apart from reinstall the drivers.
Any help will be appreciated!!
Install SE Update Service, and it'll install the drivers for you.
I got it installed, but I had enough by having several BSOD when I reinstalled all the usb drivers,(wtf), almost lost the OS, don't know why, I managed to boot, so i'm going to format my pc and install windows again. Thanks
nanodroid said:
I got it installed, but I had enough by having several BSOD when I reinstalled all the usb drivers,(wtf), almost lost the OS, don't know why, I managed to boot, so i'm going to format my pc and install windows again. Thanks
Click to expand...
Click to collapse
Uninstall SE Updated, reboot PC, install SE Update... No need for formatting.
I had to do it, all my USB drivers were just F**d,no matter what I connect to the pc, it won't recognise it and ask for a driver..I don't know the cause of this, maybe I pushed it too much.everything is working now.
Is it possible for the OP's to close their own thread? I just don't need it opened,it would be good if you could do it to help admins.
Related
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
fizzle101 said:
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
Click to expand...
Click to collapse
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Can you try booting in fastboot and tell me if that is recognized?
it still doesnt recognize it in fastboot
fc_Kuro said:
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Click to expand...
Click to collapse
i have tried that and it doesnt help
fizzle101 said:
i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message
Click to expand...
Click to collapse
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
ok i will give that a try
crk23 said:
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
Click to expand...
Click to collapse
that didnt work. o well i guess i am stock with the rom i have there.
fizzle101 said:
that didnt work. o well i guess i am stock with the rom i have there.
Click to expand...
Click to collapse
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
robocik said:
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
Click to expand...
Click to collapse
i have tried everything. changed the cable, used different pc but nothing works. i think is a hardware problem, something might be broken inside or something like that
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
baklap said:
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
Click to expand...
Click to collapse
No i havent and i gave up trying because i dnt think there is a fix for it. if yours is unrooted and the warranty is still valid you should consider returning it to HTC maybe they might replace it
got the same problem. Any solution so far ??
ddotpatel said:
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
Click to expand...
Click to collapse
Did you try that?..... You need to do the reboot PC/Laptop after uninstalling ALL HTC drivers! Then when you reboot PC, plug phone back in, should say "not recognised" again,... then follow BTDAG's guide. T'is definitely a driver issue!
tried flashing 3 roms, modaco, radug and now kimera... none working.
can connect in fastboot, it shows up in device manager as android 1.0
ive tried 3 different usb cables and 4 differet pcs, still there is no response on my phone !!!
using villian rom 10.0 rite now.
okay it boots up into fastboot and fastboot usb shows up on the screen in red,
BUT when i use the "adb devices" command in adb it doesnt show the device,
it is showing as android 1.0 in devices and printers (windows 7)
You need to use....
fastboot devices
....when your are in fastboot.
What happens when you go into your recovery, select "Toggle MS/USB" with USB connected to PC?
okay
fastboot devices command shows some serial number.
then i tried adb remount, it gave an error....
enabling usb-ms with cable attached gives no response
ok i think it might be USB driver like ddotpatel said but i am not sure.
i reinstalled my whole windows 7 to 32bit now instead of the 64bit version i was using before and today i just connected my hero to my PC and windows 7 did its thing and installed the drivers and finally my hero can mount the SD card in my PC again although i kept getting this can perform faster in USB 2.0 port or something like that i didn’t care as long as i can mount my SD card again.
now went into fastboot and used the fastboot device command and i could see my hero serial no. but when i try to flash the amonra recovery i got the permission error (i cant really remember). i tried flashing using the adb method but still no luck.
so i went to market and downloaded rom manager and used it to flash clockwork recovery and now i could boot to clockwork recovery.
from this recovery i can now flash any rom i want and although there are still a few more problems i am glad now that i can flash custom roms again.
the problem i can see so far but i can deal with is
1. i don’t think fastboot commands work even if the phone is detected.
2. SD card mounts at USB 1.1 speed. (i have tried different ports and cable but still the same thing and this is the ports i use for my N1, Desire and my other android phones with USB 2.0 speed)
PS: adb commands for pushing and removing apps is working.
Hope this can be helpful to those experiencing the same problem.
Instead of re-installing your entire OS just use usbdeview to remove the failing drivers.
Also remove any old HTC Sync installs and install the latest version.
i downloaded SE PC companion, but i cant connect to my PC to updrage Android 2.1,
PC notice: USB device not recognized
you have to mount it.
a2ha said:
you have to mount it.
Click to expand...
Click to collapse
how can i mount it? my X10i doesn't show that.
a2ha said:
you have to mount it.
Click to expand...
Click to collapse
Incorrect. You shouldn't mount the Phone for flashing. There you need to be in Flash Mode (Pressing the back button while powering on the device).
I'll go for the obvious, have you tried reinstalling PC companion? If is says device not recognised it could either be damaged (phone or usb port) or the drivers haven't installed properly (more likely).
So try a different usb port and go though the steps on PC companion and connect the phone only when it tells you to and it should install the drivers correctly or try going though the repair phone procedure without the phone connected (gives instructions). Think it installed different drivers for flashing.
same problem do you find solution
try this
try to download a driver named SEMC_Signed on your pc
after that connect your mobile
before you install this driver go to Mycomputer right click choose Manage then from the new screen choose device manager after that choose Universal Serial Bus, Uninstall any driver related to SE
Hope it works with you as it works with me
i dont know hoe to upload the file SEMC_Signed here
I've got the very same problem, although a bit more advanced. It started out this way then the phone stopped being able to charge too.
It's the USB port and something to do with the solder joints not being very good/strong enough to the main board and pulling off, especially on earlier models of the phone.
It seems to be a very common problem too with the only options being repair to the port and mainboard or replacement of the phone.
I'm awaiting my new phone right now.
Hi Guys!
My original x10a was sold to a close friend of mine, whom accidently accessed the xRecovery menu, and select to delete the SYSTEM and DATA partition.
Now he is stuck on a endless loop of being on the Sony Ericsson boot logo text screen.
Only way to power off the phone is to physically remove the battery.
Anyways, I am trying to complete a factory reset with the 2.1 firmware, so far, I am out of luck.
I have WIN 7 x64 running, with both 32-bit 64-bit JAVA SE and development
I also have installed Android SDK, wit all the possible packages, including USB Driver Revision 4
I also have Flashtool downloaded from this website, which included the SEMC drivers.
Problem is...I cant get the computer to recognize the phone at all.
I tried even Sony Update Software as well as Companion software, with no luck.
I am physically in flash mode ... solid green LED, but the computer is not detecting the phone at all.
Flashtool is advising to connect my Xperia phone, when clearly my phone has the solid green LED with black screen (hold down back button and connecting the USB)
First I thought it was the cable, which I replaced with a OEM one, still no luck.
I removed the SD card, 16gb from the phone, and connected through my computer for flash memory sticks drive (all in one), and the card was blank.
I am presuming my friend would have deleted SDCARD data as well
So, now I am stuck in a limbo, how do I fix this?
just to give you hope, if you see the se logo that means that your phone isn't bricked.
it's probably some driver that's not installed properly. I'll let someone with real knowledge explain whatto do.
Something like this happened to me. I know it sounds stupid, but have you tried rebooting your computer?? I did that, and it worked again.
Uninstall SEUS,PC Companion and then reboot the PC.
Then download SEUS and install it. Start SEUS , go through the process. It should detect it now.
Can you access xrecovery? If you Can, download a custom ROM, follow the instructions to install.
Don't forget to extract your ROM to sdcard.
Sent from my X10 using XDA App
Hi All!
Thanks for the input, I do appreciate it.
I am at work right now, but will try it this evening and let you know how it proceeds.
Just as an FYI, I did restart my computer once the Java, SE Companion, SEUS, and Google SDK were installed, still had no luck, but I will try again
To access the xRecovery, it is pressing back button couple of times right?
But the SD is blank, should I use a PC to initialize the SDcard with Xrecovery and everything?
Try this steps...
1-Download a custom ROM to your sdcard and extract. (Use your PC)
2-Reboot your x10 and press a back buton many times.
3-Make following in Xrecovery
*Factory reset
*Wipe cache partition
*Wipe dalvik cache
*Wipe Battery stats
*Install custom ZIP
*Reboot
*Let the phone 5 minutes alone please...
Sent from my X10 using XDA App
you gotta uninstall seus and pc companion, and uninstall all the x10 drivers, then reinstall seus and pc companion
Hi why don't you use flashtool to flash a new rom? I had read in somewhere else here about this tool and seems to work flawlessly to recover bricked xperia..
End of Life ....
Hi Guys!
Sorry for the late reply,
Been extremely busy with work.
Anyways, it seems I got myself a malfunctioning motherboard or broken/damaged usb connector.
Thus, I can't do anything, it is going to cost me $150 bucks to repair.
I cant get into flash mode, as soon as I do that (the green led), windows states that USB device has malfunctioned and my Xperia continuous to the boot logo screen and stuck there.
I tried just about everything, unless anyone else knows better way?
Just to prove the USB connector is damaged, the wall-charger is not even working when the USB is connected
This sounds really extreme. Can you charge the phone? Can you connect the phone to the computer and get a solid green light - ie - flash mode?
I've encountered a similar problem, the battery is completely drained, so much so that it can not connect to the wall charger, can not connect to anything at all.. just gives three flashes of red led then stops.
The only solution is to charge the battery for a few minutes in another X10 and then with enough power, get back into the phone for long enough to re-establish charge being sent to the battery.
IF you have charge and are able to get to the white SE logo, you just need to use the SEUS software to force restore of the stock firmware.
karthigan said:
Just as an FYI, I did restart my computer once the Java, SE Companion, SEUS, and Google SDK were installed, still had no luck, but I will try again
Click to expand...
Click to collapse
Just one more question, have you tried changing the USB port? Sometimes the device ID gets messed up and the only way is to switch to another USB port and make sure the phone connects to the computer with the USB cable and that you have a device id.
EDIT: Worth looking into these two threads;
http://forum.xda-developers.com/showthread.php?t=1034997
http://forum.xda-developers.com/showthread.php?t=1032864
Problem is I am not sure what your exact problem is as I would like to help more!
The newest version of Flash Tool has drivers package included, it worked for me without installing (or reinstalling) SEUS or PC Companion. Look for a 'drivers' subfolder inside the extracted files.
Can you charge the phone?
My USB port has completely died and I've not a working phone even, so I'm unable to work on custom kernels or anything - I don't have an X10 any-more until this USB port on the phone gets re-soldered
I really Need Help! My computer wont recognize my tablet in fastboot mode, and my tablet wont read my micro SD card, also when i turn it on normally it stays at splash screen and when its plugged in to the computer the computer starts installing the drivers and it fails to install each time. I go to troubleshooting options and it states code 10. which states device cannot start.
I Have looked for ways around this, like manually installing the drivers, and my computer wont let me. Also the tablet can go to both: bootloader, and Clockworkmod recovery.
I factory reset my tablet so I cannot install anything, untill i get it to connect to my computer.
I am running Windows 7 64-bit on my computer!
Any help is very much appreciated!
Thanks!
NewDev4IOS said:
I really Need Help! My computer wont recognize my tablet in fastboot mode, and my tablet wont read my micro SD card, also when i turn it on normally it stays at splash screen and when its plugged in to the computer the computer starts installing the drivers and it fails to install each time. I go to troubleshooting options and it states code 10. which states device cannot start.
I Have looked for ways around this, like manually installing the drivers, and my computer wont let me. Also the tablet can go to both: bootloader, and Clockworkmod recovery.
I factory reset my tablet so I cannot install anything, untill i get it to connect to my computer.
I am running Windows 7 64-bit on my computer!
Any help is very much appreciated!
Thanks!
Click to expand...
Click to collapse
Did you install the naked driver from here? http://forum.xda-developers.com/showthread.php?t=1426502 if not do that first once you get that working... then you should be able to fastboot to the pc... next thing I would concider is going to twrp recovery instead of cwm....either go for an older version or go the full gambit of nvflash then install the latest twrp... after that you should be set.....I can comment more on it if you need it....
Bricked Tablet Help
Gage_Hero said:
Did you install the naked driver from here? http://forum.xda-developers.com/showthread.php?t=1426502 if not do that first once you get that working... then you should be able to fastboot to the pc... next thing I would concider is going to twrp recovery instead of cwm....either go for an older version or go the full gambit of nvflash then install the latest twrp... after that you should be set.....I can comment more on it if you need it....
Click to expand...
Click to collapse
I tried installing those drivers but it didnt work
also i used WSG_Unbricker v.1.0.3
my system is wiped
is there any way to install the operating system on it
i need a link for an update.zip
thanks
i can now only go to fastboot mode and wipe data mode.
NewDev4IOS said:
I tried installing those drivers but it didnt work
also i used WSG_Unbricker v.1.0.3
my system is wiped
is there any way to install the operating system on it
i need a link for an update.zip
thanks
i can now only go to fastboot mode and wipe data mode.
Click to expand...
Click to collapse
What do you see in device manager with the tablet plugged into the pc and running in fastboot?
Maybe this helps
I had a similar issue but my tablet couldn't be identified by windows, at first i thought it was my drivers so i tried to install new ones but windows wouldn't let me stating the same code 10. At the end it was a defective usb cable, i bought a new one and everything worked all right the first time i plugged it in. And by the way i was stucked at the CWM loop. Hope this helps and sorry for my bad english.
Bricked tablet
sj010489 said:
I had a similar issue but my tablet couldn't be identified by windows, at first i thought it was my drivers so i tried to install new ones but windows wouldn't let me stating the same code 10. At the end it was a defective usb cable, i bought a new one and everything worked all right the first time i plugged it in. And by the way i was stucked at the CWM loop. Hope this helps and sorry for my bad english.
Click to expand...
Click to collapse
Thanks
Im not sure if it is a bad usb cable, i think it is my computer because my computer doesnt even recognize my iphone and i have itunes installed,
i think it is partially due to a funky computer for me.
BRICKED
Gage_Hero said:
What do you see in device manager with the tablet plugged into the pc and running in fastboot?
Click to expand...
Click to collapse
It says fastboot
I sent my tablet in to asus
just waiting on them to reply
Well here's the problem which is quite awkward.
I installed CM9 on my Sony Xperia GO from freexperia project. It worked really great. :good:
the issues is, however, after 3rd time I installed CM9 (I was trying to get CM10 FXP on this device), my PC won't recognize the USB device( i.e. my phone). I am pretty sure I followed all the steps, I wiped the phone after installation everytime. I have MTP (setting>storage>MTP).
I have all the drivers re-installed on my laptop (running on Windows 7). I have tried another USB cable as well. tried all the USB ports.. but I can't make this machine recognize my phone.
and please considering my expertise level, start from level 0.
a big thanks in advance!!
dranzer_hunt said:
Well here's the problem which is quite awkward.
I installed CM9 on my Sony Xperia GO from freexperia project. It worked really great. :good:
the issues is, however, after 3rd time I installed CM9 (I was trying to get CM10 FXP on this device), my PC won't recognize the USB device( i.e. my phone). I am pretty sure I followed all the steps, I wiped the phone after installation everytime. I have MTP (setting>storage>MTP).
I have all the drivers re-installed on my laptop (running on Windows 7). I have tried another USB cable as well. tried all the USB ports.. but I can't make this machine recognize my phone.
and please considering my expertise level, start from level 0.
a big thanks in advance!!
Click to expand...
Click to collapse
Try with latest flashtool mate. Connect your phone with USB debugging activated and from flashtool go: Devices-> check drivers. Could work.
No, didn't work
DaRk-L0rD said:
Try with latest flashtool mate. Connect your phone with USB debugging activated and from flashtool go: Devices-> check drivers. Could work.
Click to expand...
Click to collapse
thank you, I am using flashtool ver 0.9.11.0 (I guess latest one). But, it didn't help.
dranzer_hunt said:
thank you, I am using flashtool ver 0.9.11.0 (I guess latest one). But, it didn't help.
Click to expand...
Click to collapse
Did you try connecting your phone on fastboot mode and install drivers from control panel?
Yes, but there is no prompt for missing drivers
DaRk-L0rD said:
Did you try connecting your phone on fastboot mode and install drivers from control panel?
Click to expand...
Click to collapse
I tried to connect phone in fastboot and flashboot mode, however, there was no notification for missing drivers. Only the blue light on phone turned to red after sometime ( and green for flashboot mode). I had similar problem earlier as well (not the same one), back then the PC used to show that driver was missing for fastboot. I simply used to go to flashtood>Driver folder and used to install the drivers. It worked earlier. Not anymore though.
Could there be possibility that I messed up (during installation somehow) some phone file which accounts for connectivity with the system?
do you or anyone know which files in phone are responsible for such functioning?
USB not responding
Have you tried using a different USB-port on your PC?
Under Windows XP i have to reinstall all drivers when connecting a device to a different USB jack.
sorry for later reply
_Agility_ said:
Have you tried using a different USB-port on your PC?
Under Windows XP i have to reinstall all drivers when connecting a device to a different USB jack.
Click to expand...
Click to collapse
I think I tried everything. The weird thing is that the same system with same USB with same port sometimes reads the USB driver. but, when I restart the phone in bootloader mode, it doesn't recognize the drivers again. However, this sometimes is very rare, since the last message, perhaps 2 or 3 times.
Could it be possible that there have been any hardware issue?