Related
Hi, i've just bricked my x10 mini (wanted to edit framework-res.apk and did something wrong)
I still can see it under adb, but if i try to enter su mode to recover old file, i'm getting errors stopped(signa), segmentation fault.
If i try to recover it via seus, i can't connect the phone, coz i need to have "back" button pressed when connecting usb, but i can't turn device off. Only restart with "home" plus "power" buttons...
What am i to do?
[SOLVED]
I've managed to recover it via PC - Companion. When it says, that you have to power off the phone, then hold "back" button and connect usb, you have to hold both the "back" and "home" buttons, then press the "power" button and in the momen, when screen goes black, immediatley connect usb. Then slide your finger to hold only the "back" button.
dopeless said:
[SOLVED]
I've managed to recover it via PC - Companion. When it says, that you have to power off the phone, then hold "back" button and connect usb, you have to hold both the "back" and "home" buttons, then press the "power" button and in the momen, when screen goes black, immediatley connect usb. Then slide your finger to hold only the "back" button.
Click to expand...
Click to collapse
I thank you sooo very very much ...
I am also trying to recover my phone using pc companion but get download error.
I tried what u said but when i hold back + home and press power the screen does not go black but the menu to switch off or silent or plane mode come up. I hit power off and connected the usb and slid my hand to the back button but still got same download error... any siggestions would be greatly appreciated...rooted u20i 1.1.a.0.12 software i have got
You can use UpdateService : sonyericsson.com/cws/support/phones/topic/updateserviceapplication, is better than PCCompanion.
Make sure u turn off firewall before dwnlding update.
Sent from my E10i using XDA App
Thanks
onetwothree
Thanks mate,just tried your tip using SEUS and it worked (after many tries).
my phone turns on...no black screen as you said
SEUS says my mini is up-to-date and PC Companion says that there's no update available for my mini
thanks
thanks man!!! you're my hero!!!!!!
Mini Pro
albertine said:
You can use UpdateService : sonyericsson.com/cws/support/phones/topic/updateserviceapplication, is better than PCCompanion.
Click to expand...
Click to collapse
Hi,
would this be any different in Mini Pro? I tried to update the FW via SEUS, but its still bricked.
i dunno what 2 do !! =S my phone is bricked already ... and stuck @ Sony ericsson logo .. the 1st one .. when i press on the power button .. the LED the red one goes up 3 times .. am confused what 2 do =S ...
am i the only one who has done everything i could find in this forum and yet can't fix my phone?
I've tried to access xrecovery --> not possible
I've tried re-flashin with x10flash tools --> no can do without the usb debugging activated
I've tried using SEUS --> Only gives me a screen saying my phone is up-to-date but won't let me reinstall it
I can go on flash mode but it's just uselesss since no program can do anything.
App2sd / adb shell/ wi-fi problem
I've rooted my phone and also did the process of put the adb archive in the C:\ to execute by the cmd the program to set up the phone for app2sd.
The problem is: after this i doesn't have the root permissions to change the name of things in the root of the memory, neither access to wi-fi... i tried to undo the app2sd process unninstalling it, but there always a problem to access this file:
/system/bin/sh
Could someone please help me?
Thanks by now.
How i did it
Thank you!
I had big problems with this at first, but then i realised that i had to plug in usb right after i pressed the power button and also right before the vibration. This is in about 2 seconds so i plugged the usb half way at first so that i could insert it the whole way fast, before the vibration.
It's working but after many tries
Thanks again!
hi can someone please help i tried to flash my xperia x10 mini and failed badly and now when i turn on my phone the logo screen comes up and then just stays on... ive left it for about 20 minutes but still nothing its like its bricked on the logo screen i can restart it but it just does the same again. Ive also tried taking the battery out putting it back in then using the update service to lock it in flash mode while i use binarys flash kit but that doesnt work either. Also the update service just says no software update is available it thinks i already have the latest one please help i will be truely greatful x
Edit :
Ive already tried SEUS, PC Companion, Binary's Flash Kit.
Ive already tried connecting it to the adb but cant get adb to recognise a connected device and all the drivers are installed.
i guess you have, but i've to ask, have you tried the repair option in SEUS/PC Companion?
yeh i have seus says i already have the latest software version installed and pc companion actually wants me to load my phone up to connect it :/ any ideas? x
me too!!
i had the same problem with you...
how to get shutdown this phone?
phone must be shutdown when i want to flashing from SEUS..
and i don't know how to shutdown this phone because the battery....
edit : just connect your phone and use restart (hold power button & middle button)
after reboot, press back button and you will connect with SEUS...
but, my phone already get latest update...and i can't flashing from SEUS...
sob..
ive been shutting down the phone by taking the back off and unscrewing the inside cover. Then you will see the battery cable where you can simply unplug it from the motherboard and then reinsert it.
Edit: I also have connected to SEUS but it says i already have the latest software
Ive taken it to a local phone repairs shop ive given up... they said it'll be fresh and working by tomorrow morning it cost me £20 but its just one of those things en it :/
hey guys
all you need is to follow the instructions on SEUS,
when it tells you that you have the latest software press repair.
and when it say that you should turn off your phone and then reconnect it while pressing the back buttom do the following:
1- connenct the phone to the computer
2- press the 3 buttoms (power + mid buttom + back buttom) then as your phone restarts and vibrate remove your fingers from the power and mid buttoms but maintain pressing on the vack buttom
i hope this will help
I was going to update my to latest firmware 2.1.1.A.0.6. When it says update completed i removed my data cable and tried to start the mobile but its not starting it gives only unlimited bootloops and im not also able to connect my data cable to reupdate it. Plz tell me what can i do?
download bin4ry flashtool and your firmware and flash it. this should work
Sent from my x10mini using XDA Premium App
I managed to do a similer thing to mine a while back and had multiple heart attacks.
All I did was connected the phone up and start sues.
Get sues to the point where it is asking you to hold the back button.
When at that point press and hold the home button (middle) and press and hold the power button till you feel your phone shake and restart.
Once that happens rapidly tap the back button and watch sues.
If your timings just right then sues will link and start the proper process for you and break the loop reboot problem.
I hope this helps you and any others out there that have this problem.
Thanx guys for ur sugns.but i got new way. I waited till the my battery goes down when that happens i connected my mobile to se updater by pressing back key and it works.
I also did that and also something similar to Zt3v0's method instead of tapping the back key, I held mine in after the phone reset itself that way the phone is in flash mode as soon as it boots. It works for me all time.
SE Xperia X10 Mini, Rooted, XRecovery loaded, Andread 2.2.1.
Now won’t boot properly. Can sometimes get past the swipe unlock screen to be confronted by:
“The application Home (process com.sonyericsson.home) has stopped unexpectedly. Please try again. Force Close”
And
“The process com.android.phone has stopped unexpectedly. Please try again. Force Close”
Is there anyway to do a proper hardware only hard reset on the mini as obviously can't select anything from the menu ?
All the information I’ve found so far just uses the Power and Home buttons to switch it off/on. No help.
SE PC companion won’t link to upgrade as I can’t press any buttons on the mini.
I don’t hold out much hope for the FlashTool if it also requires buttons to be pressed on the device.
On most other devices you can at least remove the battery but not with this.
Just so we are clear, there is no way to brick an x10 mini. now flashtool will always work unless there is a physical defect with the phone...in which case your done. basically download flashtool (use search function) and read instructions for it(use search function). it only requires you to turn off your phone and hold back as you plug it in so there is almost no way for a device not to be able to do this.
I followed the FlashTool instructions, held down the back button but no joy. No green LED on device, no recognition on FlashTool.
I don't think the mini is turning off properly.
The only way I can turn it off is to hold the home and power buttons for 3-4 sec, but usually it restarts immediatly.
Is there another way to properly switch off/on?
g.rommit said:
I followed the FlashTool instructions, held down the back button but no joy. No green LED on device, no recognition on FlashTool.
I don't think the mini is turning off properly.
The only way I can turn it off is to hold the home and power buttons for 3-4 sec, but usually it restarts immediatly.
Is there another way to properly switch off/on?
Click to expand...
Click to collapse
take a good look, the green LED should flash atleast ONCE....i had the problem when i was new to rooting and installing ROMS.....do this...
1. make your deskie/lappy fully prepared to flash your phone by SEUS, only requiring you to connect the phone in flash mode (even keep your USB to phone cord inserted to the computer)
2. power off the phone by holding the home+power key (& keep holding them, now press the back button).
3.release the power key but KEEP HOLDING THE HOME KEY and the back key...(if you release the home key, the cell will restart).
4. now connect the phone to the computer and hopefully it will connect in flash mode
hope this helps in solving your problem
if i helped you, kindly press the "THANKS" button
In my case, I found that keeping the usb cable plugged into the phone was a problem. So I kept the usb cable plugged into the pc but uplugged from the phone end till flashtool asked me to start the phone in flash mode. Another problem I had was of the drivers when the phone started in flash mode even though I had PCCompanion installed. I had to install the flash mode drivers from the ggsetup-2.2.0.10.exe file which was in the drivers folder under the FlashTool install folder.
Use SEUS! Its better!
Solved! Now working back in SE Android 2.1 state. Rooting, new ROM etc tomorrow.
I found a reference online that described a small rubber panel to the left of the camera lens that gives access to the battery connector and allowed me to disconnect that battery. I could then keep it switched off until ready for the power/back button/connect USB juggling act that the SE Update Service application required in order to reload Android 2.1.
Thanks for all the replies and suggestions.
Yesterday I rooted my LG Optimus L9 using LGpwn tool, after that it worked just fine.
This morning I tried to install ClockworkMod Recovery. Using this post. It explains how to download and install CWM Recovery from app that you downloaded in form of APK.
This method did not work 100%, but I was able to reboot normally, so in post it said that sometimes it does not work and you need to download and use Busybox installer Link to busyboxx.
After this I managed to boot in too CWM using app from mentioned thread.
Then problem occurred. After I saw CWM was working I selected reboot device option.
Except now when it started to boot it stops right after Second LG logo (First is static one second one is animated).
I get white screen with "Encrypting" on top and gray line. And one Reset Phone button. IMG they are Dropbox links.
This is followed with Error : Unfortunately, the process com.android.phone has stopped. IMG
I am able to boot in too CWM and I have tried flashing something like Cyanogenmod but I get error Status 7. Tried removing line that checks model, no use.
Tried clearing every cache and fixing permissions, nothing. Formatted everything still no use.
Dear XDA community That you in advance.
I fixed my phone by going into SW upgrade mode, and using the Upgrade Recovery function of the LG Software Update tool or whatever. Be sure you don't have any http servers open
Sent from my LG-P769 using XDA Premium 4 mobile app
I got the same problem, but when I try to access to SW mode and connect to LG Software Update tool to restore my phone, the phone keep disconnect and the phone screen will turn off, so I fail to restore my phone, I have already re-install the USB driver and changed a several USB cable but the problem still, but I tried to restore my phone with SW upgrade method since last night and is was OK, can anyone help me?
---------------------------------------------------------------------------
The Problem Solve Finally, the solution is I plug the battery back to the phone after access to LGMobile Support Tool, and after finish the restore process, the phone will restart but keep boot loop, then I perform the hard reset (Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! ), then the phone begin work~~~
pigmich said:
I got the same problem, but when I try to access to SW mode and connect to LG Software Update tool to restore my phone, the phone keep disconnect and the phone screen will turn off, so I fail to restore my phone, I have already re-install the USB driver and changed a several USB cable but the problem still, but I tried to restore my phone with SW upgrade method since last night and is was OK, can anyone help me?
---------------------------------------------------------------------------
The Problem Solve Finally, the solution is I plug the battery back to the phone after access to LGMobile Support Tool, and after finish the restore process, the phone will restart but keep boot loop, then I perform the hard reset (Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! ), then the phone begin work~~~
Click to expand...
Click to collapse
I had this problem too...
You can also try, start upgrade tool, Remove battery -> press volume up + insert usb with upgrade tool open, it will detect, insert battery then go to extras and click upgrade-foutherstel (is in dutch for me)
Then it will all work, I can't even install a custom rom My bootloader is unlocked, rooted phone, installed recovery, see my thread about the error I get!! please!
help lg p768 encrypting error problem
can someone help me please.
i have the same problem from the starter of this thread..
installed recovery apk and goes to encrypting error.
i dont know what to do and how to begin to solve my phone problem.
thanks