Weird problem. When I get a call, I press to answer the call on my headset then it immediately goes to a female voice that says unknown caller press 1 to answer or 2 to send to voicemail.
Defeats the purpose of Bluetooth if I have to pull the phone out to answer.
Anyone else have this issue?
I called sprint and they said it was htc issue then transferred me to htc and they couldn't figure it out.
I am using a blue ant t1 device.
Thanks!
That would be happening because you synced with Google Voice. Google Voice is intercepting your call and is causing the additional requirement. I think that can be changed in your Google Voice settings if you log in to the actual web app, not the app on the phone. I had the same problem. It was intercepting voice and text. Haven't changed it to use just Google Voice for Voicemail yet.
Bingo!
Sprint couldn't answer...blamed on HTC...HTC couldn't answer said would get back to me in 5 business days...
Come here and BAM!
This site rocks...
Thanks again Skepticalmystic for your help!
Related
So my problem just started last night.
And that is when i answer a call i get a prompt after i hit answer, It tells me to press 1 to accept call or press 2 to send to voicemail.
It started after i installed Google voice. So i uninstalled but it's still doing it now.
s3nt from my 3D wond3rland
I had that problem with Google Voice too. When I uninstalled it, I had to log into Google Voice and edit the settings to remove the service from my phone. Been a while back, but log into Google and look it up...or just Google "disable or remove Google Voice" and see what it says. Hope this helps.
gilbydakid said:
So my problem just started last night.
And that is when i answer a call i get a prompt after i hit answer, It tells me to press 1 to accept call or press 2 to send to voicemail.
It started after i installed Google voice. So i uninstalled but it's still doing it now.
s3nt from my 3D wond3rland
Click to expand...
Click to collapse
This is a setting in Google Voice. There are two options:
1) Announces caller (Press 1 to accept, etc) and (if you miss the call) lets you listen as caller leaves a message
2) Directly connects calls when phones are answered (Standard for most phones w/o GV)
These settings are stored on the Google Voice web site under Settings -> Call -> Call Screening.
I keep Call Screening on because I like to be able to hit 1 to accept or 2 to send to voicemail, etc. I can see how it could be frustrating and some people would rather when they pick up have the call directly connected.
Hope that helps!
I have the rezound, as well as a Kindle Fire, and I installed Google Voice on them. I read through other threads, and no luck with my problem.
I have used Google Voice on my computer to call and text people, and with my upcoming trip to europe, it would be nice to use that to call people back home.
Problem, I have it installed on two devices, yet on both it doesn't give me the option to call, or even compose any sort of message at all. Any ideas on what I can do? The only options I get are refresh, settings, and search.
For me, when I'm in my inbox (or any other folder) I have a compose button on the bottom left. For calls, can you go into settings, Making calls, and change it to ask for all calls? Then use your dialer to place a call and it should prompt you.
Sent from my ADR6425LVW using XDA
Fontos said:
I have the rezound, as well as a Kindle Fire, and I installed Google Voice on them. I read through other threads, and no luck with my problem.
I have used Google Voice on my computer to call and text people, and with my upcoming trip to europe, it would be nice to use that to call people back home.
Problem, I have it installed on two devices, yet on both it doesn't give me the option to call, or even compose any sort of message at all. Any ideas on what I can do? The only options I get are refresh, settings, and search.
Click to expand...
Click to collapse
click settings. the second option in the settings menu controls the ability to make calls via google voice. it is however done by dialing a forwarding service and therefore uses your minutes. it is not voip.
Fontos said:
I have the rezound, as well as a Kindle Fire, and I installed Google Voice on them. I read through other threads, and no luck with my problem.
I have used Google Voice on my computer to call and text people, and with my upcoming trip to europe, it would be nice to use that to call people back home.
Problem, I have it installed on two devices, yet on both it doesn't give me the option to call, or even compose any sort of message at all. Any ideas on what I can do? The only options I get are refresh, settings, and search.
Click to expand...
Click to collapse
I pretty much use Google Voice as my primary mode of voice calling. You don't make a call through the app. Simply go to settings, and tell it to either use GV for every call, or ask it to prompt you at every call whether to call from your phone or to call from GV. Then when you simply dial as normal through the dialer app, it will either just use GV if you told it to, or ask you which to use.
BTW, All GV calling functionality is disabled on wifi tablets. I honestly have no experience with 3G/4G tablets, but on my Wifi Transformers I have to install a SIP client on the tablet and route GV calls to another VOIP service I use.
a.mcdear said:
I pretty much use Google Voice as my primary mode of voice calling. You don't make a call through the app. Simply go to settings, and tell it to either use GV for every call, or ask it to prompt you at every call whether to call from your phone or to call from GV. Then when you simply dial as normal through the dialer app, it will either just use GV if you told it to, or ask you which to use.
BTW, All GV calling functionality is disabled on wifi tablets. I honestly have no experience with 3G/4G tablets, but on my Wifi Transformers I have to install a SIP client on the tablet and route GV calls to another VOIP service I use.
Click to expand...
Click to collapse
I'm a bit confused. I thought the only Google Voice calling solution was GrooveIP if you want to send and receive calls properly for your Google Voice phone number. GrooveIP does not use your minutes and is definitely VOIP.
On every device I tried it on, there is a bit of delay with GrooveIP, but the quality is good (good internet connection required, whether its 4G or strong 3G or WiFi.)
Can you please elaborate a bit? Are you just using Google Voice app, but its using your minutes?
xdadevnube said:
I'm a bit confused. I thought the only Google Voice calling solution was GrooveIP if you want to send and receive calls properly for your Google Voice phone number. GrooveIP does not use your minutes and is definitely VOIP.
On every device I tried it on, there is a bit of delay with GrooveIP, but the quality is good (good internet connection required, whether its 4G or strong 3G or WiFi.)
Can you please elaborate a bit? Are you just using Google Voice app, but its using your minutes?
Click to expand...
Click to collapse
When you use the google voice app, it dials into the google voice services which then forwards the call to the number you dialed. You get charged for the minutes during the call as a result. This also breaks free mobile to mobile calling.
GrooveIP is a 3rd party app that lets you connect to GV via VOIP so you don't have that forwarding call.
Use sipdroid with pbxs function. Tie it to Google voice, download Google voice callback, and presto. Have it on an old evo for my 8 year old daughter. She loves texting with Google voice. Makes her feel like a teenager. There is sometimes a slight echo, but completely usable.
Sent from my ADR6425LVW using Tapatalk 2
JeramyEggs said:
Use sipdroid with pbxs function. Tie it to Google voice, download Google voice callback, and presto. Have it on an old evo for my 8 year old daughter. She loves texting with Google voice. Makes her feel like a teenager. There is sometimes a slight echo, but completely usable.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
This is exactly how I made voice calling possible with my GV number on my wifi tablet.
Anybody else having this issue? I'm getting an app crash when trying to switch carriers for voice mail from AT&T's to Google's. It was working perfectly fine with my S II.
contentryder said:
Anybody else having this issue? I'm getting an app crash when trying to switch carriers for voice mail from AT&T's to Google's. It was working perfectly fine with my S II.
Click to expand...
Click to collapse
On my Sprint SGS3, I wasn't able to set Google Voice as my voicemail on the phone itself. However, I went through the process as far as I could (within the Google Voice app), and then logged on to Google.com/Voice > Settings > click on "Deactivate Google voicemail on this phone". After that, re-enable Google Voicemail and you should be good to go.
Soon after that, the settings on the phone were greyed out and voicemails came in as expected.
Sorry if this isn't so clear! Time for bed and my brain isn't firing on all cylinders. Good luck.
It's not working for me either. Seems there's issues on Sprint and T-Mo too with the SGSIII and Google Voice. I hate using stock voicemail. Hope the next Google Voice update cures this.
mercado79 said:
On my Sprint SGS3, I wasn't able to set Google Voice as my voicemail on the phone itself. However, I went through the process as far as I could (within the Google Voice app), and then logged on to Google.com/Voice > Settings > click on "Deactivate Google voicemail on this phone". After that, re-enable Google Voicemail and you should be good to go.
Soon after that, the settings on the phone were greyed out and voicemails came in as expected.
Sorry if this isn't so clear! Time for bed and my brain isn't firing on all cylinders. Good luck.
Click to expand...
Click to collapse
everyone! this works!
just did it.
disabled it using the browser like he said. and then re-activated it on the same page by following the instructions. just checked to see if it works, and it does
yay
Thanks! Was having the same problem til I came across your post. Now I'll know what to do in the future.
Sent from my SAMSUNG-SGH-I747 using xda premium
while we're here, when someone leaves me a voicemail, it goes to my old phone that has the google voice app (it's still connected to wifi). it doesn't show up on my new phone though.
do i have to do something with my old phone to make it stop? or do i change some other settings?
Lieu10ant said:
while we're here, when someone leaves me a voicemail, it goes to my old phone that has the google voice app (it's still connected to wifi). it doesn't show up on my new phone though.
do i have to do something with my old phone to make it stop? or do i change some other settings?
Click to expand...
Click to collapse
bump?
i couldn't get this to work. the post wasn't very clear. did you go to google.com/voice on your phone or via website? i did via phone and don't see anywhere to "Deactivate Google voicemail on this phone". didn't see it via computer, either.
edit: so i found this via browser on my computer finally. reactivated and still no dice
I was only able to switch my VoiceMail provider from AT&T to GoogleVoice by using the dialcode listed @ voice.google.com (*004*<insertyourGVnumberhere>#), and it works, even though Dialer app settings still shows "My carrier" instead of "Google Voice" as the provider, and attempting to change it in the Dialer still says "Forwarding number change failed".
My problem now is that I can't for the life of me figure out where to change the timeout before it forwards to VoiceMail. I test-called from another phone and it rings for at least 60 seconds(!) before forwarding to GoogleVoice, instead of the 15 or so it used to be. Where do you change this, or can you?
Me too - luckily I saved the activate/deactivate google voice in my contacts list so was able to change the forwarding ok. Not sure if there's anyone at google that takes feedback on these kind of issues or not - but I haven't seen many things responded to on their feedback forums (like DST / calendar sync issues for the last few years with no fixes). Get what you pay for I guess.
OK, I received the Mate 2 yesterday and am trying a data plan and Google Hangouts w/ dialer. Works well. I paired bluetooth to my car. Now here is the question: Is there any way to get the bluetooth commands to go to Hangouts dialer versus the phone dialer? I was able to speak fine but have to manually dial and hang up. Probably not, but I would like to be pleasantly surprised.
lightfire said:
OK, I received the Mate 2 yesterday and am trying a data plan and Google Hangouts w/ dialer. Works well. I paired bluetooth to my car. Now here is the question: Is there any way to get the bluetooth commands to go to Hangouts dialer versus the phone dialer? I was able to speak fine but have to manually dial and hang up. Probably not, but I would like to be pleasantly surprised.
Click to expand...
Click to collapse
I see the question now. No I don't think you can initiate a call via Bluetooth in hangouts but on mine I can end a call and answer via a button on my steering wheel or also on my plantronics bluetooth headset.
Sent from my MT2L03
Coffee Freak said:
I see the question now. No I don't think you can initiate a call via Bluetooth in hangouts but on mine I can end a call and answer via a button on my steering wheel or also on my plantronics bluetooth headset.
Sent from my MT2L03
Click to expand...
Click to collapse
My car bluetooth will not answer or end a call but I can talk. I just ran up several minutes cause I thought it ended the connection - whoops.
lightfire said:
My car bluetooth will not answer or end a call but I can talk. I just ran up several minutes cause I thought it ended the connection - whoops.
Click to expand...
Click to collapse
Hangouts doesn't use minutes, it uses data, so you ran up some data. ?
Sent from my MT2L03
Coffee Freak said:
Hangouts doesn't use minutes, it uses data, so you ran up some data. ?
Sent from my MT2L03
Click to expand...
Click to collapse
time is money is data. Do you honestly think you had to point that out and that I didn't know the difference?
What I am wondering is why the bluetooth will interface with the regular dialer and not the hangups dialer and if there is a way to point it to the hangups dialer.
lightfire said:
time is money is data. Do you honestly think you had to point that out and that I didn't know the difference?
What I am wondering is why the bluetooth will interface with the regular dialer and not the hangups dialer and if there is a way to point it to the hangups dialer.
Click to expand...
Click to collapse
I've tried a few things that don't work. Another thing I found out that doesn't work is sending a text from my gwatch. I can respond to texts and hangouts messages from my watch, hangouts is my default texting app, but if I try to send a text, it says it sends but doesn't. Nor does using Google now to send a message. It says no texting app installed. Very confused. Not sure if it's a problem with the phone, the watch, hangouts, Google now. I'll play with it more when I find the time.
Sent from my MT2L03
If the person on the other end of the call hung up, the call would end.
I've noticed that the proximity sensor doesn't respond in the hangouts dialer like it does in the stock dialer (ie making a call with the phone, finish call, take phone away from ear, screen automatically turns on and shows current call). Hangouts dialer is still pretty new, many minor things can be improved.
Also, the "voice dialer" app that comes stock on the Huawei Ascend Mate2 is only going to work with the stock dialer. I don't know if that is what you are trying to get to work with the hangouts dialer. If you are, it won't work.
isarebe said:
If the person on the other end of the call hung up, the call would end.
I've noticed that the proximity sensor doesn't respond in the hangouts dialer like it does in the stock dialer (ie making a call with the phone, finish call, take phone away from ear, screen automatically turns on and shows current call). Hangouts dialer is still pretty new, many minor things can be improved.
Also, the "voice dialer" app that comes stock on the Huawei Ascend Mate2 is only going to work with the stock dialer. I don't know if that is what you are trying to get to work with the hangouts dialer. If you are, it won't work.
Click to expand...
Click to collapse
The call I made where it didn't hand up was directed to voice mail on their end. Bluetooth "end call" didn't break the connection and it never hung up - It was several minutes later that I noticed it and it showed a connection still.
Yes, I agree that there probably will be improvements made to the hangouts dialer as time goes on. Maybe Googe will do a voice dialer add on. Or maybe a 3rd party voice dialer for hangups will appear.
I also have noticed odd behavior in the hangups app. Sometimes when I dial the person answers and yet it keeps on ringing on my end (called my wife while she was standing next to me).
So I have google voice set up for my voicemail. I noticed that this has not been working. I had to reset up my phone and then it stopped working again. It looks like when they phone is set to forward my calls to my watch, it disables google voice forwarding and my att voicemail program then pics up. I was wondering if any one knows how I can get this working again.
I went and removed my phone from google voice and then reactivated it but once my phone starts to forward me calls it no longer works.
Just wanted to see what other google voice users are doing.
They both use the same entry for your phone line: conditional forwarding. So, you can only have one at any time. When you setup auto-forwarding, it will change the conditional forwarding to Gear S number and when it no longer need forwarding, it resets which will be back to your network default that is your voice mail number.
I set up my gear s # as an additional phone in Google voice and had t-mobile turn off voice mail for it, that way I don't need to worry about calls forwarding.
I don't use my Google voice number as my main number so I like the forwarding set up. I wonder if I can have my voicemail number changed on my phone to my Google voice number.
rfs830 said:
I don't use my Google voice number as my main number so I like the forwarding set up. I wonder if I can have my voicemail number changed on my phone to my Google voice number.
Click to expand...
Click to collapse
Go to the google voice web site & look in settings under that number. It should say "activate voicemail" and it'll give you a code to dial on the phone. It's something like *444*YOURNUMBER*# or something like that. But the gear forwarding will always disable GV when it's enabled.
zoso28 said:
Go to the google voice web site & look in settings under that number. It should say "activate voicemail" and it'll give you a code to dial on the phone. It's something like *444*YOURNUMBER*# or something like that. But the gear forwarding will always disable GV when it's enabled.
Click to expand...
Click to collapse
Ya thats the problem im am running into. I may call att to see if there is something else we can do to fix this.
rfs830 said:
Ya thats the problem im am running into. I may call att to see if there is something else we can do to fix this.
Click to expand...
Click to collapse
The only other thing i can think of is using the short code to set your watch to use google voicemail so your phone would forward to the watch & the watch would forward to GV if you missed it on the watch. It's just a thought but I'm waiting to use gear forwarding for that reason so lemme know if you find a setup that works.
One option is to turn off all forwarding in the watch and phone, then set up both the watch and phone normally in Google Voice.
All calls will be sent to both the phone's number and the watch's number. For whatever reason, the phone tends to ring at least 3 or 4 seconds before the watch rings, so there's no problem with multiple ringing devices. If neither the phone or watch are answered, the call will go to Google Voice voicemail.
Also, within Google Voice Settings / Phone, click "Activate Google voicemail on this phone" and dial the number string indicated. You'll have to do this twice, once through the phone, and again through the watch. An important note is that the phone needs to be disconnected from the watch when you dial the code through the watch.
The easiest method is just to put the phone into airplane mode before dialing the number from the watch.