Im sorry if this has been covered, ive spent the last 2 days reading the Vibrant bible thread and also over on Cyanogen site and Android spin and im really frustrated with how often my device soft bricks.
i have 5 roms on my internal SD card and Rom manager running. i was able to use the option to install form SD card no problem for 4 roms and the 5th one was one called Hybrid R4 and when it rebooted into the clockwork recovery and performed the format and update then it rebooted into the Vibrant logo for 5 min. i removed the battery and rebooted so many times and same thing.
this is the 3rd time this has happened and its so annoying even more so because i know i have a good ROM on the internal SD card i can load up again but i cant get to it because i cant get into clockwork because i keep getting the stock samsung recovery screen with limited options resulting in having to use ODIN to flash the stock firmware and start over.
when i had my Mytouch i had a permanent recovery flashed to the device so i neve rhad to do this. are the Vibrants not able to have a alternate recovery console flashed to it?
which rom are you flashing over? It sounds like you are going from a 2.2 froyo rom. Hybrid R4 is from the time before the Devs started including Kernels with their roms. If you want to flash a 2.1 rom thats doesn't include the kernel over a 2.2 rom you need to flash a 2.1 kernel first. Search the bible for kingklicks kernel or Justanothercrowds kernels. Good luck.
Edit: also when you flash clockworkmod recovery in rom manager, it places a special update.zip in your root directory. leave it there. when you soft brick all you need to do in the samsung stock recovery is reinstall packages (sometimes needs to be done twice) and it will load clockworkmod recovery.
and they can have clockwork permanently flashed but it sometimes causes other problems. Eugene373 has a few kernels for 2.2 that have it permanently flashed, but it caused me issues when trying to flash another rom over it where i had no recovery at all, not even samsungs.
'm running stock Froyo on a T-mobile Vibrant. I tried to get Rom Manager to backup the current rom. When it boots into recovery and I select reinstall packages it fails on signature. Apparently this is a 2E/3E Recovery issue.
So I went ahead and ran the 3e_recovery installer
http://forum.xda-developers.com/showthread.php?t=833423
which says it succeeded. Now when I run backup the current rom, it boots to recovery, and reinstall packages no longer complains about signature. instead it just reboots back into recovery so quickly that I can't really read the 4 lines of messages, though I can just make out a "replacing stock .. " as one of the last lines.
Reboot system still does work, so I can get back into normal operation, but I'm stuck as far as gettting a backup.
Help!
Well things have changed a bit.
I went ahead and did the KB5 upgrade, which got me back to stock recovery. So now I'm back to the case where CWM will fail on signature.
How are other Vibrant users dealing with this?
- what color is it?(lol, thats funny. I werk in parts)
- is there an update zip? what happens if you flash that?
kmandel said:
'm running stock Froyo on a T-mobile Vibrant. I tried to get Rom Manager to backup the current rom. When it boots into recovery and I select reinstall packages it fails on signature. Apparently this is a 2E/3E Recovery issue.
So I went ahead and ran the 3e_recovery installer
http://forum.xda-developers.com/showthread.php?t=833423
which says it succeeded. Now when I run backup the current rom, it boots to recovery, and reinstall packages no longer complains about signature. instead it just reboots back into recovery so quickly that I can't really read the 4 lines of messages, though I can just make out a "replacing stock .. " as one of the last lines.
Reboot system still does work, so I can get back into normal operation, but I'm stuck as far as gettting a backup.
Help!
Click to expand...
Click to collapse
i have exactly the same issue...i tried everything posted here but not working...last chance is to odin back i guess
If I were you I would do a back up then> odin back to stock then> root then> download Rom manager Then> Flash a new custom Rom. The Stock TMO one is sucky and does not run as smooth as the custom ones. Then you will an awesome phone
I have successfully been able to root and install everything on my Mytouch4G just fine, however, when I tried to install my wife's Vibrant, I am stuck. Here is what I have done:
1) I rooted successfully using superoneclickv1.9.1
2) I installed ROM Manager and also downloaded the Auxora ROM to get ready to install
3) When I flash CWM recovery, it says current and latest recover is 2.5.1.2 (concern here that my mytouch says 3.0.2.4 - do different phones install differently with CWM?). When I look at all CWM recoveries I also notice there is two seemingly more current versions available 2.5.1.3 and 2.5.1.4. I have left it at .2 but wondering why all the versions.
4) When I reboot into recovery, I always get the stock recovery and have not been able to get CWM recovery so I am unable to flash my Auxora ROM. I ran update packages numerous times, and get a signature verification error. I have tried a recovery 3e patch that does not work either. I also gave a try at downloading and SDK, but received temp root errors (phone is already rooted).
After reading many posts, I cannot seem to get a direct answer on what I should do to get CWM to actually boot properly, so I can flash a ROM. Someone said to flash the stock JDK rom, but if I can't boot into recovery, how can I flash anything.
Any help would be greatly appreciated.
You need to get a program for your pc called odin to get back to stock. you can find that and instructions on how to use it if you search for the daily updated vibrant bible its GREAT
http://forum.xda-developers.com/showthread.php?t=849028
going to stock eclair heres a a great guide
So going back to stock eclair will then allow me to install CWM recovery then load roms?
Every once n a while I haft do the install packages thing twice before it gives me clockwork green
. Hope this helps.. o n btw u should look at some of the other roms in the bible before u try auxora
yes u should go back to stock eclair for every rom, in my opinion. Then after that do the 3 button combo and install packages and u will have to do it twice and then the green screen will kick in and ready to rock a new rom.
i hope this helps
What is your current firmware?
I see you posted over in the "NOOB GUIDE" thread, you should really try to root using the method posted there and not any one click root apps.
This should be the root method everyone uses:http://forum.xda-developers.com/showthread.php?t=723479
After root your phone recovery should be blue. Choose "reinstall packages" gives you green recovery(this may need to be repeated multiple times to work possibly including flashing CwMRecovery with ROM manager. I recently did it 5 times b4 i got green recovery)Once you access green recovery chose "apply sdcard:update.zip" go into advanced and choose "reboot recovery" This should give you red recovery. Do a nandroid backup and flash away. Good luck!
Another option you could do is to download SGS kernel flasher from the market and flash a voodoo injected kernel with that app. Then when you boot into recovery you will have red voodoo recovery and you can flash away.
Odin to stock the best way to flash a new rom
Sent from my SGH-T959 using XDA Premium App
jman531 said:
So going back to stock eclair will then allow me to install CWM recovery then load roms?
Click to expand...
Click to collapse
The stock 2.2 that Samsung distributed with their Kies tool has a recovery that checks signatures. Everything earlier does not check signatures. So either use something earlier to get CWM running, or use a ROM that doesn't have the stock 2.2 recovery in the first place, or mod your recovery using the method described in http://forum.xda-developers.com/showthread.php?t=833423
Using Odin to go back to stock Eclair between your flashes of modded roms has the benefit of taking care of this, and also can clear up left over bits and pieces that may interfere with the proper function of your new ROM.
ok, i followed the instructions and am back to eclair, however, whenever I install packages, it just reboots the phone, not even back into stock recovery. I use the 3 key method and get into recovery, run install packages, and the phone just boots back up...its like it isn't running the update.zip file...
UPD: When i load rom manager and try to reboot into recovery, it says the application superuser permissions has stopped unexpectedly and keeps force closing now....titanium backup wont run now either, my root permissions seem whacked after going back to eclair?
UPD2: I followed instructions to unroot and reroot here: http://forum.xda-developers.com/showthread.php?t=739300
It removed superuser, then added it back again, but I still get the unexpected error and it appears my root is not in place. I am back to eclair, and now need a certain way to get my root fixed, so I can try and flash CWM recovery. Without root working, it is not letting me. My wife hates me now for doing this to her phone, so those of you that are married, I would appreciate your assistance to get back on her good side...before Mother's day...please? =)
Ok, thanks for all the help, however, I am really back where I started. I can only get stock recovery, and for the life of me, cannot get CW recovery to load. I used ODIN to go back to eclair on the vibrant, have a good root on the phone now, and no matter how many times i reinstall packages i cannot get clockworkmod recovery to load, ever. Any more thoughts out there?
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
starkiller86 said:
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
Click to expand...
Click to collapse
thanks...It is rooted, but not sure about busybox...the stock recovery is 2e now since I went back to eclair, so not sure i should follow that link as it talks about modifying 3e and making it backwards compatable. I did use that process before I went back to eclair, and it didn't work for me. I have uninstalled rom manager, and reinstalled...and it is different in that it shows a flashed recovery 2.5.1.2, and never asks me for my phone type anymore...it used to ask me and i had to select vibrant....is the recovery supposed to be 2.5.1.2? when I show all recoveries it lists .1, .2, .3, .4 so wondering if I should use .3 or .4...why does it stay at .2?
starkiller86 said:
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
Click to expand...
Click to collapse
OK>>> I GOT IT... Thanks to everyone who helped...Here is what was needed:
1) Install ODIN, install back to eclair
2) uninstall ROM Manager, reinstall
3) I needed to select the 2.5.1.2 recovery from the list again (this was important as it somehow knew of the previous load, but files were missing, or something was just wrong.) It finally loaded properly, and asked for phone type again, so selected vibrant
4) I rebooted into recovery, and instead of install packages, i rebooted once, as starkiller suggested
5) After reboot, went back into recovery from rom manager, and this time installed updates, and it showed that it replaced the recovery with CWM.
6) It rebooted into stock recovery however, so I once again selected install updates, and it went right into CWM recovery, and now I am flashing happy!!!
Thanks again everyone...this was soooooo different than my mytouch4g!
If you have the Kies update of Froyo, the 3e mod will sometimes not work. I've gotten to CWM though , but its best to downgrade then flash a ROM from there.
I just wanted to bump this thread because it really helped me.
I've messed around with numerous android phones, and I've never had thie issues I've had with this phone getting into recovery to flash ROMs
Thank you!
I am new to modding my vibrant (phone is rooted but that's all) but looking to flash a new ROM. I dl'd rom manager and installed cwr. When I reboot into recovery mode via rommanager or manually doing it,I do not get the prompt to backup. Only options I get are to reboot system, reinstall packages, delete all user data, delete cache data, and format internal sd-card. Anyone know how to fix this? I just updated to 2.2 froyo UVKB5 kernel 2.6.32.9 if that helps.
looks like you have stock recovery.
try reinstall packages, might take a couple times..
or install CWM via replacing update.zip
What he said, yeah.
So just delete the current update.zip file on my phone and replace it with a new one? Any links to download the update.zip file?
Sometimes you have to Reinstall Packages twice for it to go from regular recovery to CWR. If you flash a custom ROM though, most have a custom recovery built in.
If you have to replace the update.zip (which I don't think that you do), this worked for me the first time I rooted.
http://forum.xda-developers.com/showthread.php?t=849028
How to Root.
I am rooted, but I want to back everything up so that way if I do not like the new custom rom I can go back. I tried reinstalling the update.zip file from the link but s till have the same issue. Any other solutions besides going back to stock and going from there? And if I did go back to stock, would I lose everything?
I backed up using Titanium Backup, is that the same as going into recovery mode and backing up?
Re-download recovery using ROM Manager, then repeat. Worked when I had a similar issue.
Tried that several times. I also reuploaded the update file and reinstalled the package several times. Still no luck so I think I might go back to stock using Odin.
Then DL Eugenes froyo don't brick ROM with the 2e recovery update in it, then re-install packages, maybe twice and you'll have the green recovery menu your seeking
Googled Eugene's DL and I do not feel to confident with it. Is it supposed to fix the issue with getting into recovery mode?
So I went back to stock last night using Odin, upgraded to 2.2, and rooted using Superoneclick. Phone's back up and running but faster than the first time I upgraded to 2.2. I still have the issue getting into the proper recover to install the zip file. I've read that deleting Slacker helped some people, assuming it freed up space on the System ROM. My system ROM was full until I started to delete some apps. I now have 20.7 MB free. Could not enough System ROM space be the issue?
I am now also getting a "Fail" attempt when I try and update su saying that it failed to find currently installed su binary. Any advice on fixing this?
TIA!!!
it would probably be easier to just odin back to stock jfd and then flash a deodexed kb5 build thats rooted with SU already in it from here in the forums.
http://forum.xda-developers.com/showthread.php?t=1036193&highlight=deodexed
If you flashed kb5 from kies or odin and don't want to reinstall the rom then you will need to flash a modified 3e recovery because you probably are not quite rooted and won't be able to use CWM until you flash the modified 3e recovery...
http://forum.xda-developers.com/showthread.php?t=833423
You might want to check out the AIO vibrant toolbox (pinned topic in the development thread) it will give you big easy buttons and instructions to flash back to jfd and root and flash a new rom if you need to... It comes with Odin so you can wander into the install folder and fire up Odin to flash the modified 3e recovery if you decide to go that route too.
If I flash a deodexed kb5 will i still be able to flash a custom rom?
Ok so i had ICS passion installed then one day the rom gave me an error telling me encryption unsuccessful. So i followed the instructions to fix it, by putting the partition on the micro sd card (8gb). I then decided to flash back to stock gingerbread with odin. I thought that if I put a galaxy s international rom on the US vibrant it would work, but i was wrong so dont try that. I was stuck on a bootloop and was able to get to download mode. Then i used Odin to flash JFD for vibrant it said i passed but when i booted it did the same. Now im on KB5 and it gave me android system recovery <3e> but i have an error dev/block/mmcblk0p1.
I cannot go to menu, i can access download mode and android system recovery, i also tried to install update zip but it gave me the signature fail.
Please help me back to stock firmware or any stable version. Thank You
http://forum.xda-developers.com/showthread.php?t=1278683 follow the instructions in the thread and remember to flash the bootloaders
You should just Odin back to JFD and go from there. Flashing bootloaders is dangerous, shouldn't be done lightly, but can be done with caution if needed, usually isn't.
try the 1click root method. see if that helps.