Currently I'm running Com 2.1 with 5/31 -50v PBJT kernel. Which so far seems to be running fine. The phone charges fine, provided I have the phone already turned on. The problem occurs if I turn the phone off and plug in the cable. It doesn't matter whether its via the wall or computer.
The battery symbol will show up on the screen and I'll see the animation symbol that shows up in the battery. But the symbol freezes, no battery status will show up. Power button doesn't work. I can tap the bottom buttons and they'll light up. The only thing to do is pull the battery.
Anyone run across anything remotely similar?
thx
Related
Hi Guys n Galz =)
Im having a very unique Problem i.e when my cell is off for any reason (battery down, i turned it of etc) it wont start again normaly. There's just a circle-loading symbol, blinking the whole time. I can only activate download modus(pressing both volume buttons and inserting the battery in) or it will only start when there is battery loading symbol(wire in) Only then it quits showing the circle symbol and shows the battery loading symbol. From then i can start the cell normally. The funny thing is that it wont let it start like this with the wall charger, only PC!!!!! Can any1 help? It somehow reminds me my gf iphone she got, it would only start with a cable in it(tethered start...)
Im running a ICS Passion Rom. Help would be nice!
I m using an custom rom, from spike. It was working very nice. Recently a problem starts. Maybe it have nothing to do with the rom, anyway, just in case you know what rom i'm using. (Spike.Pure.ICS-v7.6)
So, the problem is, the display stops to block automatic. It only blocks if i press the power button. If non, the screen decreases the brightness and stay turned on without block and off.
The batterry icon keep blinking without show the percentage, warped, it looks like a square , sometimes it back to normal shape and sometimes its becomes a square blinking
When i plug the usb cable it back to normal, shows the percentage and recharge but It doesnt tell me when its 100% anymore, no message on status bar notification as it used to show.
When the usb is pluged the "block" seems to back to normal too, as the configuration says, 15 seconds and screen turns off.
I already tryed to reset battery stats... i let the S2 discharge completely and then i charge to 100%, wait 2 hours plus then i reseted the stats.
No deal. Reset darwin cache.. same...
Plus, it keep telling on notification bar that i'm connected as storage device even when the usb is disconected. But if i connect it to PC it works normal.
Anyone know what can it be?
1. try search function
2. faulty usb port try to clean it with a clean brush, look for more details, or it may need to be changed
this is caused by humidity (dropped in water/snow, rained in it, high humidity area where you live)
Hi, I have 2 problem here,
1) I'm using S2 i9100G and the baseband is I9100GDDLP7. i notice this few week when i start-up my phone the battery charge icon appear in the screen. in order for me to start-up the phone i need to long press the power button.
2) if I pulling out the USB cabel from my phone, the USB indicator still appear the top information screen,
is both problem related to battery or phone software ??
Hi i hope everyone is doing great today.
I brought this device a few weeks and worked pretty good. I havent used it for like 2 weeks it was always on sleep mode because i havent turn the tv on for 2 weeks. (it shows like a red light which is sleep mode on the device)
I switch the tv on and then the device with the remote control. It turn on blue indicating it is now on. But for a reason i cant seem to find it the android page on the screen.. it usually just click HDMI1 Or HDMI2 on the tv... like it worked all the times but now i cant see nothing no apps nothing. It has the device on and even if i tried to restart and unpluged and take out the HDMI cable off and back on the device will remain blue as in turn on at straight up even when i plug the cable back in.
So is there a way to fix this or a restart ? i dont no what happenend to the device or what is going on.
Not an issue with the tv...dvd player works... tv works... channels working. But the device shows a blank screen. i tru press the turn off button on the remote control but nothing does to it because there is a blank black screen on tv. I have the device unplug from the wall but even if i turn the power on the back wall the device will always show blue as in its on it is no longer sleep mode.... But still dont see anything on the tv screen for the device to the area which i normally watch. I checked the cables everything seems fine.
The small device has no reset or buttons.. you just have to relie on the remote control instead.
What happened to the device i have no idea... its just shows the device has a blue light at it. When its blue this means the device is turn on.
Since i haven't used the device for 2 weeks it was always on red colour on the device which means (the device is on sleep mode) because im not watching tv)
So what can i do? what do you think what is wrong? Nothing shows on the tv screen for it. But the device has now kept itself on blue light which means its always now ON if i plug the cables... it wont go to sleep mode or anything as in red light but nothing i can do because i dont see anything on the tv screen for this android device
Can you help? thank you
johnau014 said:
Hi i hope everyone si doing great today.
I brought this device a few weeks and worked pretty good. I havent used it for like 2 weeks it was always on sleep mode because i havent turn the tv on for 2 weeks. (it shows like a red light which is sleep mode on the device)
I switch the tv on and then the device with the remote control. It turn on blue indicating it is now on. But for a reason i cant seem to find it the android page on the screen.. it usually just click HDMI1 Or HDMI2 on the tv... like it worked all the times but now i cant see nothing no apps nothing. It has the device on and even if i tried to restart and unpluged and take out the HDMI cable off and back on the device will remain blue as in turn on at straight up even when i plug the cable back in.
So is there a way to fix this or a restart ? i dont no what happenend to the device or what is going on.
Not an issue with the tv...dvd player works... tv works... channels working. But the device shows a blank screen. i tru press the turn off button on the remote control but nothing does to it because there is a blank black screen on tv. I have the device unplug from the wall but even if i turn the power on the back wall the device will always show blue as in its on it is no longer sleep mode.... But still dont see anything on the tv screen for the device to the area which i normally watch. I checked the cables everything seems fine.
The small device has no reset or buttons.. you just have to relie on the remote control instead.
What happened to the device i have no idea... its just shows the device has a blue light at it. When its blue this means the device is turn on.
Since i haven't used the device for 2 weeks it was always on red colour on the device which means (the device is on sleep mode) because im not watching tv)
So what can i do? what do you think what is wrong? Nothing shows on the tv screen for it. But the device has now kept itself on blue light which means its always now ON if i plug the cables... it wont go to sleep mode or anything as in red light but nothing i can do because i dont see anything on the tv screen for this android device
Can you help? thank you
Click to expand...
Click to collapse
The devie was working pretty much fine and new and worked. When not watching the device went red color mode. But when i turn the device on with the remote control it went blue which emans i have just turn on the device. But i dont see nothing on screen no way for me to restart or anything because theres nothing on the screen on display. Just a blank screen. And no no one has touched the tv what so ever.
I have the same problem. Any solutions yet?
try this, it could be the power issue. unplug the power adapter cable from the device and use the USB port and USB cable for supplying power to the device.
Same issue second box now just frozen tried reset unplugging etc
Has anyone come across this issue, battery is fully charged but when i press the power button to check it shows quick charging like normally it shows when we plug in and just after that some weird timings ive attached the screenshot, I couldn't take the screenshot of when it says quick charging coz it happens very quickly and the status changes to this