Does anyone else experience that the folio won't wake up after standby, when using the CM7 ROM? The power led is just blinking orange, but it won't respond to anything.
I had this problem too. With mblaster last compilation,
Related
Hi there,
since a couple of days it happens often to me that my screen won't turn off in standby, sometimes even when the screen is locked, though i´ve already disabled led notification both in the cyano options and in the single apps, like skype. It happens more often when the phone is plugged to the recharger. Has anyone else experienced this problem? any suggestion? ty in advance
Hi, I'm running neutrino rom and I'm trying to find a way for the notification LED to blink even if the screen is on. How can I accomplish this? I've tried lightflow but the LED still only blinks when the screen is off.
I would like this function, since if I have my phone in the dock and the screen has gone to screensaver mode I can't look in the satusbar to see if I have a notification. And since the LED only blinks if the screen is off I have to touch the screen to check and I find that silly to have to do. Sometimes I forget and then hours later I find out a have had missed calls and texts.
t.Lancer said:
Hi, I'm running neutrino rom and I'm trying to find a way for the notification LED to blink even if the screen is on. How can I accomplish this? I've tried lightflow but the LED still only blinks when the screen is off.
I would like this function, since if I have my phone in the dock and the screen has gone to screensaver mode I can't look in the satusbar to see if I have a notification. And since the LED only blinks if the screen is off I have to touch the screen to check and I find that silly to have to do. Sometimes I forget and then hours later I find out a have had missed calls and texts.
Click to expand...
Click to collapse
I believe our phone is one of those that doesn't blink led with screen on. I know lightflow warns of this as does my handcent. Don't think its possible unless someone else proves me wrong.
that's strange. if I mess with the LED notifaction settings under Cyanogenmod setting I can test the LED notification while the screen is on. Somehow it must be possible.
t.Lancer said:
that's strange. if I mess with the LED notifaction settings under Cyanogenmod setting I can test the LED notification while the screen is on. Somehow it must be possible.
Click to expand...
Click to collapse
Is that cm7 or 9? I noticed in 7 the settings just aren't there (for me anyway) to use led for anything other than system default. With 9 I noticed led functions totally different like the charging led working (love that!) So maybe its rom dependent.
I'm running Neutrino CM7. the LED notifcationsettigns are definetly there. maybe it is rom dependant. Does the LED work for you if the screen in on running CM9?
t.Lancer said:
I'm running Neutrino CM7. the LED notifcationsettigns are definetly there. maybe it is rom dependant. Does the LED work for you if the screen in on running CM9?
Click to expand...
Click to collapse
I honestly haven't had a chance to test that with cm9. I load the rom and test the things that I use most in order, wifi, camera. I don't get passed the camera issue on most. That's a bug I can't live with since I take tons of pics. I will try to remember to test it out next time I flash. Im on rc1 of 7 now getting ready to update to rc2, maybe there will be something there. Where did you find the settings for it in neutrino?
Just upgraded to cm7.2 rc2 and found the screen on led setting. Works great for me. Just wish I could get a charging solid led that goes off at 100% I got spoiled from my flipside I guess but its just so much nicer to not have to turn the screen on to verify full charge. Lightflow didn't work for me.
Hello everyone.
My Folio with CM9 alpha 5 have a strange problem.
Sometimes (it seems to be random) the screen stays awake after turning off the device. The red LED also stays on. It seems like it doesn't want to turn off. Then I have to hold the power button for 10 sec to hard-turn-off it.
Also I got the screen flickering problem after waking up the device. I wonder if there's something common in the problems.
Anyone knows a solution?
In general the CM9 a5 is a nearly PERFECT rom. I mean it's like not a Folio. Almost every problems gone. I used foliomod 1.4 before and there were so much SOD which was a horror. Sometimes my images and videos from the SD card were deleted randomly.
All I miss about the CM9 a5 is the bluetooth. I hope they'll fix it soon or release an alpha 6.
Sorry if I have any grammar mistakes.
I have foliomod installed and when I lock it, randomly turns on too, each 10 minutes or so... the only way to fix it is to turn it off, but it's annoying because I use it as an ebook sometimes. I was going to try CM but if you have the same problem...
I have the same problem. seems to be a bug in the rom
LED works but after reading the messages LED won't go off it still blinks.
anyone know any workaround on this?
PS: I loved lightflow but it's a huge battery hog
i have a strange problem. i have used all previous versions of dragon jb till 1.8.
In last 3 roms ( dragon. JB 1.6, 1.7& 1.8) whenever i connect the charger red LED light is on showing carging but when i disconnect it the light remains on as red light for long time.
When there is full charging the light turns green during connecting to charger but after disconnecting, it remain on as green light. when i use mobile this LED turns off but afer locking again LED red or green depending upon the charging status agains turns on.
i considered it as hardware problem initially but when i changed rom. (flashed Turkbey rom V7) for testing it, the problem resolved.
now when i remove charger the LED notification light turns off immediately which was not with dragon rom. its strage thing for me. if it would be a hardware problem then after changing the rom , it should persist
Is this a rom problem?
Does anyone else had this problem?
please suggest me a solution if you can
Thanks and regards
Sent from my GT-I9300 using xda premium
why don't you go back to stock Rom and check
My advice is to ask in the thread of the Rom you downloaded. Maybe someone in there can help
Also why not try Light Manager-LED Settings from the Google Play Store https://play.google.com/store/apps/...anager&feature=nav_result#?t=W251bGwsMSwyLDNd
Hope This Helps
donsimmi said:
My advice is to ask in the thread of the Rom you downloaded. Maybe someone in there can help
Also why not try Light Manager-LED Settings from the Google Play Store https://play.google.com/store/apps/...anager&feature=nav_result#?t=W251bGwsMSwyLDNd
Hope This Helps
Click to expand...
Click to collapse
i have asked in the rom thread but no one else has this issue.
the point which i want to ask is that either it is a software problem or hardware problem? most of people say it is hardware problem but then why this is solved while changing rom? if it is a software problem then is there any solution for it or not?
oxidil said:
i have a strange problem. i have used all previous versions of dragon jb till 1.8.
In last 3 roms ( dragon. JB 1.6, 1.7& 1.8) whenever i connect the charger red LED light is on showing carging but when i disconnect it the light remains on as red light for long time.
When there is full charging the light turns green during connecting to charger but after disconnecting, it remain on as green light. when i use mobile this LED turns off but afer locking again LED red or green depending upon the charging status agains turns on.
i considered it as hardware problem initially but when i changed rom. (flashed Turkbey rom V7) for testing it, the problem resolved.
now when i remove charger the LED notification light turns off immediately which was not with dragon rom. its strage thing for me. if it would be a hardware problem then after changing the rom , it should persist
Is this a rom problem?
Does anyone else had this problem?
please suggest me a solution if you can
Thanks and regards
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
U should try LED notification cust. software like lightflow. Try that and check if it solves ur problem.
Thanks
Jitu