I ODIN'd my T959 last night and everything went fine. But now during boot I get the GT-I9000 splash screen... although the phone is listed in the About section as a T959. Worse, I no longer have the green or red recovery, it's blue (even after rooting). I can no longer get to recovery using the 3-button method, I had to root the phone and install ROM Manager in order to get to blue recovery.
I tried using AIO Vibrant Toolbox and still I'm having the same issue.
Any suggestion as to how I can fix this?
Next time you odin back stock, use http://www.multiupload.com/HRYJKFLKFQ instead of the original JFD file. You can probably use this now to get the Vibrant splash back anyway. Just odin like you normally would. And you're supposed to reinstall packages again...Odin resets your recovery.
Since you flashed the GB bootloader, the combos change.
vol up + power=download mode
vol down + power=recovery
read the op next time
Agreed. Reinstall packages in recovery. Sometimes reflash recovery with ROM manager and try again then in recovery choose reboot in recovery. Good luck!
Sent from my GT-I9000 using XDA Premium App
Thanks to both of you for the response. Trying now.
laylovj said:
read the op next time
Click to expand...
Click to collapse
BTW... I read the OP, I assure you. Perhaps I didn't understand it, and that's obvious. But I read the OP. Whenever I flash a ROM I read the entire thread beforehand. I'm still very much a danger to myself and my phone.
laylovj - that did the trick. The splash is back and more importantly, I have data again. I installed SH 3.8 Revolution and it's running great.
Thanks again.
Related
Installed the DoW kernel over Bionix-v and wound up in a boot loop, unable to get into recovery, but I was able to get into download mode. Tried using ODIN to flash back to stock, but it won't boot past the 1st Vibrant splash screen.
The ONLY rom I've been able to boot is Eugene's JK2+2e Froyo ROM, but it's not recognizing both the internal and external storage (shows unavailable). I'm assuming this is due to ODINing with voodoo enabled, so I tried flashing one of SuperCurio's voodoo kernels on top, but that seemed to have no effect.
I've tried using Eugene's Froyo that doesnt brick and then downgrading to stock JFD, but it still refuses to boot, same as if I negated the Froyo step. I'm fairly lost as to what my next step should be besides randomly changing settings, but I dont want to get to a state where I can't enter download mode.
ANY help anyone can provide would be amazing and greatly appreciated, and I can of course provide any additional information that would be helpful.
Odin needs time. Odin is your solution.
Sent from my SGH-T959 using XDA App
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
torturedsoul802 said:
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
Click to expand...
Click to collapse
Sure. If it was me id download an older odin version. Just try it. Id also go back to stock.
Remember to back up a program to root.
I still use odin 1.3 myself. Works every single time.
Let me know.
Sent from my SGH-T959 using XDA App
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
torturedsoul802 said:
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
Click to expand...
Click to collapse
Keep trying. It will work eventually for no reason.
Sent from my SGH-T959 using XDA App
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
15 max
Sent from my SGH-T959 using XDA App
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
torturedsoul802 said:
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
Click to expand...
Click to collapse
No to repartition on my end. But u may want to ask about the ext4 going back to rfs. Ive always done it in cwm honestly.
Someone else with more expirience will have to answer that.
But I have never and read it doesnt need to be done.
Sent from my SGH-T959 using XDA App
Tried, still wont turn on on stock, just vibrant screen.
torturedsoul802 said:
Tried, still wont turn on on stock, just vibrant screen.
Click to expand...
Click to collapse
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
+1. If your phone boots at all it's in my experience 100% recoverable. I own a RIFF box as well so if you brick it dead then I can still fix it... . I'll be getting a video up on ODIN usage for Vibrant/i9000 owners tomorrow. Check out my Boot Logo video on my website for a little bit of ODIN usage to give you an idea. You just need to open ODIN. The put the phone in download mode and plug in via USB. Then select your PIT and PDA file and click start. Then you can reflash stock firmware. PM me as I offer this as a service as well.
Thanks for the reply. Usage of ODIN is not my problem, the problem is that flashing to JFD (whether I use Eugene's Froyo 1st or not) results in a failed boot. The phone shows the 1st Vibrant splash screen for ~2 sec and then shuts off. No process I have tried results in a successful stock boot.
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
torturedsoul802 said:
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Click to expand...
Click to collapse
Hey, thank you so much for posting this up. These are great finds. I'd be more inclined though, to just call Tmobile and get another phone. I'm really tired of messing with the phone. I don't have time to be messing with this anymore.
The fact that I can get into download mode may be good news, but it does nothing for me right now. With what we know about bricking and unbricking phones, I've thrown every trick I know at it already. I hope you get it fixed, but I"m not messing with it anymore.
drewdude007 said:
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
Click to expand...
Click to collapse
Yeah man, me too. I'm getting this thing exchanged. It's a paperweight right now. My phone is doing exactly the same thing.
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Size matters.
Hey, I haven't posted in here before, I've been a member for a while, just never had anything to contribute. So I got the whole soft brick problem. I spent countless hours trying to get into download mode. The size of the usb cable matters, I was using an LG Optimus cord, and my buddy tried his blackberry cord which had much more gerth, and BAM download mode everytime no problem. Maybe this might help some of you out there.
Also I would like to say, thank you for everyones hard work. I had to roll back to stock roms, and just got the Froyo.UVKA7 to work. I love it, it's quick, it's got color in the settings menu. I wanted to cry... Everyone that has ever had anything to do with the developement to make Android better. THANK YOU!
Absolutely,
I am having problems with the phone starting up and loading what I flashed.
I flashed JI5 Ji6, and Eugene's non bricking Froyo Rom
These 3 are the only ones I was able to find that is ODIN flashable
Why you ask?
I cannot get into Recovery, but I can get into Download mode. I can't get into any recovery at all. NOTHING. This is why ODIN seems to be my only option.
But regardless of any ROM i flash, my phone shuts off right after the Vibrant screen. No splash screen, no loading, no booting. .Nothing. It just shuts off.
I can't charge it either.
i get a Charging bootloop. HOurglass - battery shows up for a bit, then restarts over and over.
So in other words. it's ****ed.
Hope that explains it sufficiently. if you have any more questions or suggestions, Im open man, Im open.
Help me
connexion2005 said:
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Click to expand...
Click to collapse
Hey all,
Totally went back to stock...so started with DL09 and then proceeded up to ED04. I installed CWM (red) and rebooted into it and then rooted my phone. Worked great...this morning decided to wipe the battery stats...now it just goes to the Samsung (blue) recovery one. I decided to reflash with ODIN and it still just gives me the Samsung one. Any ideas on how to get this working again???
It sounds like your flash may have failed. Maybe try it again. It might be easier and more reliable to use heimdall in this situation as well.
Also, I know it's early, but this is a question and should be posted in the appropriate section.
Sent from my SCH-I500 using XDA Premium App
Go from odin straight to cwm, do not reboot after odin
sent from my ukb fascinate
What is heimdall? And yes I should have posted in the Q&A section.
bobloblaw1 said:
It sounds like your flash may have failed. Maybe try it again. It might be easier and more reliable to use heimdall in this situation as well.
Also, I know it's early, but this is a question and should be posted in the appropriate section.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
Shakes The AssClown said:
Hey all,
Totally went back to stock...so started with DL09 and then proceeded up to ED04. I installed CWM (red) and rebooted into it and then rooted my phone. Worked great...this morning decided to wipe the battery stats...now it just goes to the Samsung (blue) recovery one. I decided to reflash with ODIN and it still just gives me the Samsung one. Any ideas on how to get this working again???
Click to expand...
Click to collapse
You have to download this and ODIN to the phone ...
Code:
http://goo.gl/QCYxT
... What's happening is when you are booting up fully it is replacing the new recovery with the stock recovery... flash this, then flash CWM .. all will be cool!!
More information can also be had in this post..
Code:
http://forum.xda-developers.com/showthread.php?t=1060457
Heimdall works like Odin. Cwr is being overwritten by the stock kernel, you should flash a custom kernel if you want cwr to stick.
*Edit...beat me to it. :/
jbarcus81 said:
You have to download this and ODIN to the phone ...
Code:
http://goo.gl/QCYxT
... What's happening is when you are booting up fully it is replacing the new recovery with the stock recovery... flash this, then flash CWM .. all will be cool!!
More information can also be had in this post..
Code:
http://forum.xda-developers.com/showthread.php?t=1060457
Click to expand...
Click to collapse
You may have to flash a custom kernel to get your recovery permanent. I did the same thing to get the ed04 ota.
1. Flash the dl09 tar file in odin, don't reboot.
2. Flash the cwm3 odin file of your choice, don't reboot.
3. Boot into recovery using the 3 finger salute (should be the one you just odined).
4. Flash the custom kernel of your choice & reboot.
That should keep it rooted & keep cwm available to you, at least it did for me. The key, fwig, is to repalce the stock kernel cuz that is what will replace cwm when it boots.
Sent from my SCH-I500 using XDA App
Holy helpful crew Batman!!
:laugh:
We've all been there before man...
Sent from my SCH-I500 using XDA App
Thanks for posting this question... I was stuck with the same problem...
Hi all
I'm not new to flashing but I'm new to flashing cm7.
I odin back to stock jfd eclair. Root and Install CWM 2.xxx. I downloaded the stable cm7 and I started flashing. (after I wipe data/cache of course)
IN recovery, it said finding package, opening package, then my phone processed a series of lines and reboot automatically. On the startup, it says VIBRANT SAMSUNG, then GALAXY S CYANOGEN(mod) then the same recovery screen with many lines. It moved too fast into another reboot I couldn't read what was on the screen. And it kept doing this for quite 10 mins now.
Is it normal? if not, what did I do wrong? I can get into download mode and odin back to stock but I did it last night and I couldn't think what i did wrong.
Please help!
Hmmmm..... seems a bit wierd, try going into recovery and wiping and reinstalling with a new download.
Sent from my Nexus S 4G using XDA App
stumpyz9 said:
Hmmmm..... seems a bit wierd, try going into recovery and wiping and reinstalling with a new download.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
No i don't think its a bad dl. I checked md5. I'm odin back to stock again now.
wavestar92 said:
No i don't think its a bad dl. I checked md5. I'm odin back to stock again now.
Click to expand...
Click to collapse
Try reflashing cwm when your rooted, may have not flashed right
Sent from my Gewgle Phone via XDA App
This happened to me also, I went directly back to recovery, 3 button, and reflashed. Worked the second flash for some reason.
Thanks. I turn it off, get into recovery again, and re flash it successfully
Same exact thing happened. I have no idea how many time I odened back to stock trying to figure it out.
I did as you guys said, as soon as that loop began, pulled the battery and got back into recovery. flashed again and worked just fine!
same thing happened to me...i got back into recovery...i noticed cwm updated to 5.0.2.8 then i reflashed and all good...when i tried to flash at first. cwm was 2.5 ..maybe thats the issued it wont flash on that...has to be cwm 5.0
anyway getting ready enjoy some cm7 on my vibrant...
Okay I rooted my GS2 i777 today with the MIUI ROM found on these forums, it got stuck on a boot loop so I turned the phone off, then back on, then reapplied the CWM Recovery tar via Odin, and now when I boot the phone it just sits at a black screen...
Any idea how to fix this? I can't find a way to get into recovery mode because I don't have that "home" button in the middle of my phone...
PLEASEEEE help!!!
You hold the volume buttons and the power button, why did you reapply cwm may I ask?
Sent from my GT-I9100 using XDA App
I'm new to this stuff and was following the directions provided to me by someone who claims they knew what they were doing..
Any idea how to get this issue fixed? (Phone is on, but screen is blank as if not on)
Flash back to stock via Odin using one of the packages in this thread
http://forum.xda-developers.com/showthread.php?t=1286432
Sent from my SAMSUNG-SGH-I777 using XDA App
A jig is REQUIRED for this?
No, the jig is not required. Just need to get into download mode any way you can.
Sent from my SAMSUNG-SGH-I777 using XDA App
I appreciate the help, I really had no business trying to do this in the first place. I'm going to try and do what that link showed, I'll report back with what happens
Success = ) Thank you for the help, Dayv. It's very much appreciated!
Just for future reference, once you flash the custom package including CWM, you don't need to flash CWM again (unless you go back to bare-bones stock). If you need to reflash, just go into recovery and flash a new ROM.
Ahh, I remember my first "OMG I bricked" moment... Don't worry, you eventually get used to it and sometimes when my phone bootloops after flashing stuff I don't even care lol.
Another lame thread title that offers no help for someone with the same issue who actually takes the time to do a search.
Back to stock...thanks for the link below. The no-wipe version did not work for me. However, My Samsung Boot Screen still says custom.
I've been running Beans rom all day without issue. I've never updated to ME7. Tonight, I enabled autocorrect in my stock keyboard and read I needed to reboot for it to take effect. Upon reboot, it hangs at the Samsung Screen and Custom at the bottom. I downloaded the no-wipe odin as I can't find a full stock odin tar anywhere, and I've attempted to install it twice but after installation, it reboots, a little green android comes on the screen, and then it goes back to the Samsung Custom screen. I can't access recovery at all. Thoughts?
edpete97 said:
I've been running Beans rom all day without issue. I've never updated to ME7. Tonight, I enabled autocorrect in my stock keyboard and read I needed to reboot for it to take effect. Upon reboot, it hangs at the Samsung Screen and Custom at the bottom. I downloaded the no-wipe odin as I can't find a full stock odin tar anywhere, and I've attempted to install it twice but after installation, it reboots, a little green android comes on the screen, and then it goes back to the Samsung Custom screen. I can't access recovery at all. Thoughts?
Click to expand...
Click to collapse
Any chance someone has a link to a recovery .tar?
Theres a "full stock odin tar" in the dev section. I believe there is also a recovery tar at the link provided in the same thread.
Sent from my SCH-I545 using Tapatalk 2
Just looked there and searched. No luck. Do you have a link to it?
edpete97 said:
Just looked there and searched. No luck. Do you have a link to it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=41680619
It says mkd in the title but its a typo. Its the mdk file.
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
http://forum.xda-developers.com/showthread.php?p=41680619
It says mkd in the title but its a typo. Its the mdk file.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. Flashing now. I hope it works. For the life of me I can't figure out what happened. I edited features.xml to change disableautocorrect from true to false. I rebooted, and got stuck at Samsung Custom. I couldn't access recovery. Volume Up + Power did nothing. I got 'Loading Recovery" in blue at the top, but it just flashed and went away. I was running TWRP. Any thoughts on what might have happened?
edpete97 said:
Thanks. Flashing now. I hope it works. For the life of me I can't figure out what happened. I edited features.xml to change disableautocorrect from true to false. I rebooted, and got stuck at Samsung Custom. I couldn't access recovery. Volume Up + Power did nothing. I got 'Loading Recovery" in blue at the top, but it just flashed and went away. I was running TWRP. Any thoughts on what might have happened?
Click to expand...
Click to collapse
This one did the trick, however, it still says Samsung Custom. How do we get rid of that?
If youre unrooted I would boot into stock recovery and factory data reset then reboot a couple of times to see if it registers that its a stock phone. Triangle away supposedly gets rid of it, never used it so I cant confirm. TA needs root tho. The custom boot screen has never bothered me so I havent done much research on it. I have seen a few threads posted about it tho so I know theres an answer somewhere on the forums.
Sent from my SCH-I545 using Tapatalk 2
edpete97 said:
Thanks. Flashing now. I hope it works. For the life of me I can't figure out what happened. I edited features.xml to change disableautocorrect from true to false. I rebooted, and got stuck at Samsung Custom. I couldn't access recovery. Volume Up + Power did nothing. I got 'Loading Recovery" in blue at the top, but it just flashed and went away. I was running TWRP. Any thoughts on what might have happened?
Click to expand...
Click to collapse
here is a video that might help.
Back to stock no custom screen. Thank you. I'm going to try CWM recovery and see if my stability issues go away.
Sent from my SCH-I545 using xda premium