Was hoping an owner of the view and Flyer can confirm that the physical attributes of the tablet are different.
The location of the 3.5mm earphone plug. And the size of the panels and the LCD.
I purchased the InvisiShield for the Flyer, thinking they were identical. But nothing matches up during installation on my View.
Disappointed, and wanted to make sure it was my fault for making the assumption and I didn't receive a badly cut product from InvisiShield
nothing matches. volume controls, speakers, all off. they must be different. Hope it's easy to take this stuff off when I get the proper shield for the View.
well i can say the screens are the same. i picked up a invisible shield screen only yesterday for a flyer and everything lines up perfect on my view.
I made sure to get the skinomi carbon fiber full body skin for the view for this particular reason. I wanted to at least be sure it would fit the device. I'm hoping it gets delivered tomorrow. The case I want to purchase for it is not yet available
DrunkenIdiot said:
nothing matches. volume controls, speakers, all off. they must be different. Hope it's easy to take this stuff off when I get the proper shield for the View.
Click to expand...
Click to collapse
Actually I Disagree, I have a Flyer and a View. I transfered by TPU Case from the flyer to the view. Speaker holes in same place, Volume Controls in same place, Screens the same Everything seems to line up fine.
I don't know anything about those stick on skins, maybe they are made to really close tollerances but the TPU Cases Line up fine. With the exception of the one mike hole, that needed to be adjusted on both for my tpu case.
Invisible sheild for flyer fits View perfectly
DrunkenIdiot said:
nothing matches. volume controls, speakers, all off. they must be different. Hope it's easy to take this stuff off when I get the proper shield for the View.
Click to expand...
Click to collapse
You might want to watch out for fakes/false advertising, since the Galaxy Tab is considered in the same category as the Flyer/View they are often mistaken into selling products for the other Tablet.
I purchased directly from zagg's website, so it's not an imitation.
Zagg is sending me another set for the Flyer, and I will compare the size before installation this time.
Maybe I ended up with one that was badly cut.
I used a Zagg screen protector. I got from best buy. It fit fine. I personally couldn't stand the Zagg. Too Glossy and Sticky. It grabbed the pen and made it hard to write. The Cheapo Matte protectors work fantastic. The pen slides over them like on paper and they reduce the glare when outside.
Just wanted to reply in case I caused others to be hesitant to purchase.
The replacement is a perfect fit. I lined it up against the View and everything matches perfectly. And the packaging even specifically states for HTC Flyer.
Unfortunately, about 3 weeks of usage, I've decided I'm going to return it to Sprint. I've used 3MB of 4G/3G data. Doesn't make sense for me to lock myself into a 2Yr contract for about $2K. And I never use that pen.
Over all experience, I enjoyed the view, and am considering to purchase the Flyer as a replacement. So that invisible shield won't be wasted.
Related
Does anyone know if Zagg's invisible shield or Bodyguardz' protective film for european Touch Pro 2 will fit ATT Tilt2? Thanks
I had a similar question. I have the EU version, unbranded, and am wondering if the form factor is the same as the AT&T model. The button placement on the front looks to be identical. Can you post a picture of your battery cover?
Here we go. Looks like EU TP2, except PTT button.
Thanks for the pics. You're right, it looks like my European model. I like the color of yours better though The form seems to be the same on the backside too. Hope someone can speak to your original question for you.
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
theskeels said:
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
Click to expand...
Click to collapse
That would be great! Anyway, i decided to experiment a little and ordered the full set from Bodyguardz. Will let you know as well how it works
I got a rubberized hard plastic shell designed for the European model and fits the Tilt 2 quite nicely. The only drawback is there is no cutout for the PTT button. Other than that I cannot find anything wrong with the European case being used with the Tilt 2.
Thanks for the info. That should indicate that on the outside at least the two shells are the same, with the exception of the PTT button anyway ( and maybe a forward facing camera on the EU model?). I'm thinking that the screen savers and clear vinyl "cases" will be mostly interchangeable between the two types as well.
Saw this posted on another forum. I don't have any experience with this brand myself, but looks familiar to the Zagg product and it is specifically for the Tilt2:
http://www.clearprotector.com/atandt-htc-tilt-2-extended-protector.html
If memory serves this is the company that I bought a similar case from for my Wizard. Thanks for the link. I've been using the case that came in my box and like it a lot. It's slim and provides sufficient protection. This protector should complement it well, and allow me to leave the phone out of the case while driving without having to worry so much about it sliding around and getting scratched up.
I just ordered one (extended protector), for my unbranded phone and will let you know what I think of it when I get it, as well as what they're customer service is like.
These cases can be tough to get on, and you have to accept the feel of the edges of the material when handling the device after installation. But they do provide a good grip to help prevent the slippery little buggers that our phones are from jumping out of your mitts. And the material is tough to say the least. Once they're on right, they stay put and do the job.
I just looked on the bodyguardz website and saw that they have a kit for the Tilt2 now. I should have it later this week. I will post updates once I put it on.
Don't mean to hijack......
Don't mean to hijack the thread but do any of you use either of these products with a leather pouch/sleeve like an EaseCase. I'm wondering if there will be any peeling issues when sliding the device in and out of the case.
Received the TP2 kit today, just applied it to the phone. Came out ok, but the only thing that doesn't match is the front camera hole, so I left the original protector on; and I had to cut off a small peice of protector from the side for the PTT button. Probably I will try another set from somebody else.
How did they work out?
theskeels said:
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
Click to expand...
Click to collapse
edskii said:
That would be great! Anyway, i decided to experiment a little and ordered the full set from Bodyguardz. Will let you know as well how it works
Click to expand...
Click to collapse
Did you guys have any success?
I just got a invisible shield for my tilt 2, just for the screen. It's designed for the OEM TP2, because mine had the tiny hole on the top right for the front facing camera, which the Tilt2 does not have. Other than that, perfect fit.
I like the new sponge that comes in the kit, easier to use than spraying the screen with the wetting agent.
For anyone interested in bodyguardz, now is a good time to order. They already include the 25% discount for Christmas and if you use coupon 155A6 you get another 20% off!!
p51d007 said:
I just got a invisible shield for my tilt 2, just for the screen. It's designed for the OEM TP2, because mine had the tiny hole on the top right for the front facing camera, which the Tilt2 does not have. Other than that, perfect fit.
I like the new sponge that comes in the kit, easier to use than spraying the screen with the wetting agent.
Click to expand...
Click to collapse
Does The Isheild cover the chrome painted rim around the screen? This is what gets damaged most readily (I Know I have dropped mine out of my pocket while ridding my bike on Highway 50 in Orlando, FL.).
Anyone please reply who has a Tilt2 & Zagg Isheild installed? Does it cover the chromium = )
No, it doesn't cover the chrome. For me the screen protector also didn't fit quite right. In the process of removing and reapplying it, I have now managed to stretch it out (which necessitated cutting around the speaker so I could hear) and got all sorts of fingerprints and whatnot under it, making it useless in sunlight.
Many of the major malls in the U.S. have "kiosks" that will do a custom install.
My buddy had his ENTIRE TP wrapped, including the chrome.
I wanted to make a new thread, but decided not to clutter the board and instead ask in a couple threads for some pictures. Can anyone with the Gadgetshieldz for the ATT Tilt 2 post some hi-res images so I can see what it looks like and how it fits around the corners and sides? Thanks
I am hoping there are some people here who know about what brands/sites are good ones or trustworthy.
Ok, picking up my Evo 3D on Friday..... and surprise surprise, the phone isn't even out yet, yet there are a million different places with brands nobody has ever heard of with supposed cases for this phone, some of them even having dimensions smaller than the phone itself despite being listed as for the 3D.... (Yes I know, no need to tell me many manufacturers will take existing stock and claim it works for the new device just to sell it).
So the thing is, I have no idea what cases might be designed specifically for the HTC Evo 3D, or even any respectable sites to buy such cases from.
But I am also sorta over-complicating the issue by not being sure if I should first over a back cover for the phone or not. See, I am not a fan of the way the camerapod sticks out, I was wondering if there were any GOOD cases that add enough bulk to essentially make the cameras level with the rest of the phone, even if this will add thickness.
Something like this, but I don't know if this really is an official HTC product or not, and if there aren't better ones (or if that is a trustworthy site):
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28040
And this brings me to my main concern. The main case I want to get is a belt-clip holster, not just a simple little clip that attaches the phone to your belt but basically a whole pouch to hold it, something like this:
http://www.amazon.com/Black-Horizontal-Leather-Magnetic-Closing/dp/B0051IGCAI
But on top of the problem I already mentioned of there being a million cases just simply calling themselves a HTC Evo 3D case... there is also the issue of how it will fit. Normally, I don't care if a case is a little too big for a phone since it will hold it anyway, but all of my previous phones didn't have sensitive parts like the camera sticking out so much before, if I were to get a case, id want one designed to hold the pushed-out camera in place too.... but that would only work if I decide not to get a case that ads bulk for the purpose of keeping the cameras flush with the back of the phone.... and if I do decide to go with a back-cover to add bulk, will those pouch-cases then even still hold the phone or will it then be too thick?
Sigh... I'm over-complicating things aren't I? So anyway, any ideas? Its a shame those back-covers that increase the size of the phone can't make use of that size, such as storing a slightly higher capacity battery or something.
That first one's badass. I wonder how much coverage you get on the front. I ordered two slide together ones (like the innocase surface, but a clone), and one super-silicone one. I like buying a bunch of different colored cases to shake things up every now and then.
ey
retnuh730 said:
That first one's badass. I wonder how much coverage you get on the front. I ordered two slide together ones (like the innocase surface, but a clone), and one super-silicone one. I like buying a bunch of different colored cases to shake things up every now and then.
Click to expand...
Click to collapse
post some links so we can see what they look like plz i still need case
http://www.amazon.com/gp/product/B0053NWDO0
This is the silicone one. Cheap and highly rated for other phones.
http://www.amazon.com/gp/product/B0052TTMXA
This is the snap together (innocase surface-esque) one. Might be sold out now.
where is the case with the kickstand?
I went yesterday to a sprint store and got me a otterbox commuter case. I love it. They had about 4 different kinds but none with a kickstand. They also had the car dock as well.
TPU case for me. Ordered a few weeks ago from ebay, $4 shipped.
picked up a chase from BB this morning belt clip
case 20
screen protector was free
Are there images of any of these cases?
Cyber Akuma said:
Are there images of any of these cases?
Click to expand...
Click to collapse
case i have
http://www.bestbuy.com/site/olspage...d=1218353393109&viewtype=largeFrontView&h=387
but with out the kickstand
Picked up a Body Glove hard case when I picked my 3vo up this morning. Doesnt add too much bulk
Sent from my PG86100 using XDA Premium App
I got the case that Best Buy sells with a kick stand. It's 2-piece, kickstand, soft-touch, protects well. Very streamline. It costs too much ($40.00) but I had some reward points and ended up getting it for free. Love it!
Hmph, just terrific. To complicate matters, that hardshell case I posted isn't even available until July 13 apparently.... and nobody is showing that it looks like from the front...
I guess I should just at the minimum get a belt-clip pouch for now. Does anyone know of any good horizontal ones that were specifically designed for the Evo 3D instead of just general cases that roughly fit a phone of that shape?
What accessories exist for the Jetstream?
svetius said:
What accessories exist for the Jetstream?
Click to expand...
Click to collapse
I am not sure, however, after exploring the tablet software a little bit there is an awesome desktop dock application that shows the weather, the htc clock, and facebook updates. So I take it we will see a home dock in the near feature. I wish a car dock would come out, but because of its size and legality of videos playing while driving, we probably won't see one of those.
The only two accessories that I know of are:
HTC Scribe Pen - $80
Anti-Glare Screen Protector @ AT&T - $20
- Dan
Actually, if you go to Amazon and search for HTC Puccini, a tpc case also shows up. No case, though....soon, I hope!
svetius said:
What accessories exist for the Jetstream?
Click to expand...
Click to collapse
For anyone looking for decent case that fits the HTC Jetstream until cases that are made for this product reach the market. I have been using a Targus (Truss Leather Case / Stand) Model Number THZ07002US from Best Buy.
It’s a case that was made to fit an Acer ICONIA TAB A500 10.1 pad. It works as a cover and a stand that has three viewing angles in stand mode. It also has a slot for the styles pen but it’s a little bulky, doesn’t fit as tightly as I would like and it covers the back camera. All that said you can easily reach the on off switch, head phone jack, volume controls and even plug the unit in without taking the pad out of the case.
I still want to buy a case made for my unit that lets me use the back camera and that fits a little better but until they become available I needed some thing to protect my new overpriced but amazing Jetstream.
Looks like PDAir will be making some and rooCASE will have some nice ones ready October 19 on Amazon...they look nice.
scribe pen
is the scribe pen still coming free with the device if its bought in store? thanks
Yes, until October 15...
Pen Issues
I bought the unit in person last week, just before closing on my way home from work. The ATT store did not include the pen with my purchase and I forgot to ask for it. I went back in the am to get it and boy did it get interesting.
They started out with the story that the Pen only was included if you bought the data plan on a 2 year commitment?
I said really? Show me where it says that? I have seen the pen offered in EVERY AD as free with purchase for a limited time.
We went round and round and the finally relented but what a PIA....
ATT is truly clueless when it comes to it's own products, promotions etc.
Love the Jetstream, dont love the hoops you have to jump through.
How about NO ONE knowing when the LTE network is turning on?
Why am I paying for a data plan for something that is not ever available yet and has no timeline?
I passed on the data.
Have unlimited wifi tether on my rooted inspire so that's my dataplan.
Yeah I didnt think they were all coming with pens, hope mine has one with it ><
Didn't have that issue. I am WiFi only and they asked to register me and I said I didn't really need to because I was using it only on WiFi networks. Got the pen nonetheless.
I think you are supposed to have a data plan, but the advertising was hazy....and the ATT rep said without me asking that I got the pen. I really think it depends on the person.
ATT doesn't have good reception in my neck of the woods, so Sprint is my provider. like you, Tracy, I just tether.
Skinomi has screen protectors and skins. There is also a 25% coupon.
www.skinomi.com
Coupon code is skinomi25 plus free shipping.
They are good skins. Apply like Zagg but no orange peel. They are slick.
Case/cover for Jetstream
Picked this case up on Amazon last week.
http://www.amazon.com/HTC-PUCCINI-S...H4TA/ref=sr_1_3?ie=UTF8&qid=1316444249&sr=8-3
For 9.99 was not expecting much....Case is great....Soft and flexibile. Covers the back and all the corners and makes holding easy.
I recommend highly.
Tracy
Has anybody heard about a folio case that allows it to stand up, much like the Xoom case? It's really the only thing I find the device is missing.
Melkco says they are working on one. So does PDAir. RooCASE will have one ready mid-October....you can see the rooCASE on Amazon. PDAir on their own website, and I conducted Melkco on my own....
Looks like we will have to be patient. The gel case on Amazon works well for the time being....
found this new case on ebay - looks good - will order one and see how is it
http://www.ebay.com/itm/Sikai-Mibro...985919?pt=PDA_Accessories&hash=item2eb825e17f
Found this case on the HTC website. It is the official case. I assume it looks just lile the Flyer case..
http://shopamerica.htc.com/product/productpop.htm?prId=39802
Due to being in a rush, i got this case for $70 at WalMart
www.kensington.com/kensington/us/us/p/1615/K39336US/keyfolio™-bluetooth®-keyboard-case.aspx
Had to make some mods such as cutting a big hole for the camera and cutting some of the elastic for clear the volume and power buttons. Also cut some of the front 'frame' so the screen is fully visable.
IMPORTANT: Just be aware the two/three small holes on the top of the Jetstream are light sesons for the flash/camera, so the hole you cut for the camera must be big enough allow light access to those small holes. The BT keyboard works great with it too.
did u get the case?
itzik-g said:
found this new case on ebay - looks good - will order one and see how is it
http://www.ebay.com/itm/Sikai-Mibro...985919?pt=PDA_Accessories&hash=item2eb825e17f[/QUOTE
Did u get the sikai cover? Is it any good?
Click to expand...
Click to collapse
try this ，with free protector
http://www.ebay.co.uk/itm/150685447...47815&_sacat=See-All-Categories&_fvi=1&_rdc=1
I saw that yesterday. It also comes in pink but I would prefer a case that has a place for the scribe pen....:-\
Disclaimer: I am not affiliated with Speck, Barnes & Noble, or Amazon. I do not profit, or gain anything by this recommendation. It's just a personal discovery that made me happy and thought it might be helpful to other NSTR users.
For some reason all the B&N official Nook cases are way thicker and bulkier than they need to be. Also most third-party cases I looked at were faux-leather with huge messy stitching as if they were part of a Frankenstein cosplay competition.
Being super picky about these sorts of things, I put off buying a NSTR case while obsessively trying to find one that was:
1. Slim (All these giants cases defeat the purpose of a tiny portable ereader)
2. Play-through (I can leave it on while using, ie not just a slip-cover I can lose)
3. Protective (Not soft)
Well, I've been looking high and low, reading all the Nook forums with no luck until recently when I finally found this case: (I can't post links yet, so just search on Amazon for "Nook touch fitfolio"
Speck FitFolio for Nook Simple Touch Reader.
I saw it at Target for $29.99, but bought it on Amazon for just over $21. It looks like the price fluctuates a bit (it's $24.83 right now).
I got the black one, I got my wife the teal one. It also comes in purple.
wow, the blue one is really ugly. :-D looks like a lunch box. The grey one is nice.
I am using a cover bought from B&N, it is a bit thicker and larger but at least it protects my nook well from pressure and falls. That cover above seems to slim, I don't belive your nook would survive if it falls e.g. on the corner. Mine did several times.
Can you lock the front side of the cover to the back side (while reading)?
Cases
I use the Silicone skin. It's relay nice and absorbs most of the shock of a drop.
http://www.barnesandnoble.com/p/silicone-frame-in-graphite/22315829
cceerrtt said:
I am using a cover bought from B&N, it is a bit thicker and larger but at least it protects my nook well from pressure and falls. That cover above seems to slim, I don't belive your nook would survive if it falls e.g. on the corner. Mine did several times.
Can you lock the front side of the cover to the back side (while reading)?
Click to expand...
Click to collapse
1. I've looked at each and every official B&N cases in detail and found all of them, frankly, to be really lacking in several areas. The Speck case has a much more secure attachment system as well a good shock absorption due to the material and the shape of the case. Also, as I mentioned, it is much more form fitting than any of the B&N cases.
2. Yes, you can lock the front cover to the back while reading.
I should have mine next week!
Based on your recommendation I ordered one, and I should have it next week. I will let you know how it works out.
Edit: I just exchanged my NSTR at B&N a couple of days ago as it had a cluster of stuck pixels. I had no problems, but the employee said that it could have been caused by something being pushed down on that screen at that point. This is why I decided to get a case, as I don't want it to happen again!
Musulsa said:
1. I've looked at each and every official B&N cases in detail and found all of them, frankly, to be really lacking in several areas. The Speck case has a much more secure attachment system as well a good shock absorption due to the material and the shape of the case. Also, as I mentioned, it is much more form fitting than any of the B&N cases.
2. Yes, you can lock the front cover to the back while reading.
Click to expand...
Click to collapse
jhedfors said:
Based on your recommendation I ordered one, and I should have it next week. I will let you know how it works out.
Edit: I just exchanged my NSTR at B&N a couple of days ago as it had a cluster of stuck pixels. I had no problems, but the employee said that it could have been caused by something being pushed down on that screen at that point. This is why I decided to get a case, as I don't want it to happen again!
Click to expand...
Click to collapse
Edit: I reviewed the description & it DOES say the bungee is "two-way", so I am assuming it is designed to work that way - it just seemed a bit of a tight stretch. No biggie for me, as I don't think I would be attaching it any - folded back works fine.
Just received mine today. It really has a nice feel, and I think it will protect it well. Thanks for the recommendation!
P.S. The cover DOES fold back upon itself, but I wouldn't say exactly say it "locks" (rather, I would not want to, as it would overstretch the "bungee").
EDIT: I just reviewed the specs, and it does state that the bungee is "two-way" - it just seemed a bit of a tight stretch. No biggie for me, as it works well, simply folded back, and not attached.
So the folded cover is not "fixed" in the folded position? Could you upload more photos?
Mine nook cover is magnetic and therefore folded front & back cover keeps together, moreover when bonded with magnetic clip.
I have bought aluminium case for my NST. It has 3 positions for reading. The NST clips inside so it wont fall out. It has a black padding inside and it seems to be thinner then all those folding leather ones. The disadvantage of this cover is -> when you open the cover and flip it at the back, so it flat ... it's kind of awkward to read it like that, because of the round shape. It just feels
Since this is one of my first posts in this forum, I can't put the LINK for the cover. but if you would go in UK Ebay and type in search : aluminium nook ... you should see it. it cost 12.99GBP.
But now with the "keayboard hack" ... I'm thinking about finding a way how to modify the cover for 10" tablets with keyboard so it can hold the NST. That's what kepps my mind busy at the moment.
I agree completely with the Speck case. I too do not see the need for B&N making such large covers for such a small device. The Speck cover is just barely bigger than the nook and is comfortable to hold with the cover folded back and secured. The nook snaps in and out of the cover very easily. If you fold the cover back and secure it, it stays level and has enough grip to not slide if you prop it against something to read. I would prefer a magnet or snap closure, but after several uses the bungee gets easier to fasten. Very satisfied with this cover.
I found the Specs cases at my local Target. Prices varied from $29.99 for the standard colored (blue, purple, green) cover to $34.99 for a black 'leather' version. They did not show up at the online Target.com site. Very nice. I may have to get one.
I have ordered Industriell Cover in Carbon with Lyra Light and Anti-Glare Film when bought my Nook. And right after my order came to me in B&N store appeared Silicone Covers and Stella Light. I`d rather bought them...
What I don`t like in my cover is the way Nook is mounted into it. Why not to fix the book with four of these latches. Another thing is the size, tried to find anything that adds less to the sizes of the Nook itself.
Also in this theme I saw Speck cover, if I knew of it earlier I`d mostly bought it. But now I don`t need two covers so... I use what I use...
Dagon.Alex said:
I have ordered Industriell Cover in Carbon with Lyra Light and Anti-Glare Film when bought my Nook. And right after my order came to me in B&N store appeared Silicone Covers and Stella Light. I`d rather bought them...
What I don`t like in my cover is the way Nook is mounted into it. Why not to fix the book with four of these latches. Another thing is the size, tried to find anything that adds less to the sizes of the Nook itself.
Also in this theme I saw Speck cover, if I knew of it earlier I`d mostly bought it. But now I don`t need two covers so... I use what I use...
Click to expand...
Click to collapse
I have the same case, and it's not that easy to hold. And trying to press the buttons on the left just makes the entire thing flip. Also, what changed between the Lyra Light and the Stella Light?
Have no problems holding it.
Don`t like how left buttons are pushed myself that`s on what I said about latches.
Stella looks just prettier then Lyra. Also Lyra just unbends when Nook is being shaked(while reading in bus or other transport)
cceerrtt said:
So the folded cover is not "fixed" in the folded position? Could you upload more photos?
Mine nook cover is magnetic and therefore folded front & back cover keeps together, moreover when bonded with magnetic clip.
Click to expand...
Click to collapse
I think that's the one I got: I would normally never buy a case made by the device manufacturer, but I picked this one up at Best Buy for (I think) $15: it's two stiff boards, just wider than the Nook Touch itself, with a hinge at the top, with a magnetic clasp that can also be used to hold the front and back cover together as a stand when they're folded backward. The whole thing is light, compact, and protective--and not any harder to read in the case than out of it (plus, if you need a reading light, it's easier to clip it to the cover than to the Nook itself). You can even charge the device without opening the cover, though you do have to move the clasp aside.
This case must be discontinued, though, because now I can't find it on either the B&N or the Best Buy site.
I didn't like any cases available for the nst. Till I made one. What do you guys think?
Awesome. Went making such myself
larryflynt said:
I didn't like any cases available for the nst. Till I made one. What do you guys think?
Click to expand...
Click to collapse
Good work, very cool. Did you use a book, or some sort of journal? I have been wanting to do something like this, but do not have any books that I am willing to cut up.
Sent from my SCH-I500 using xda premium
It was a blank journal that was 5.75x7in. It was tight fit but I managed.
I searched far and wide for a case for my STR and I thought about getting a Speck FitFolio until I saw one in person in Target. Seemed too flimsy. Anyway, after a long search I found Oberon covers. Solid drum dyed tooled leather, about 3/16" thick. Not cardboard covered by a thin strip of 'leather'. They come in many designs and colors and cost about $15 more than a high priced B&N cover, which is OK, because I think it will last a lifetime.
I do not work for, nor am I affiliated with Oberon Designs. I'm just a very satisfied customer.
The oberon case looks familiar:
Product Link: http://www.amazon.com/Otterbox-Defender-Tune-Belt-Thunderbolt/dp/B0056AN7SQ
Here’s a quick run down with photos (arm band).
I was hoping this would fit the EVO LTE with a case and fortunately it does. I initially was just going to use it with my Dizitronic TPU case, but thanks to another xda member, I also ended up ordering the Ventev Case located here: - http://www.amazon.com/Ventev-Edge-Holster-Combo-White/dp/B00846W5XC
For those of you with other cases, you can measure to see how your case compares to the Ventev. The dimensions of the EVO LTE with the Ventev case on it are 141(L) x 76(W) x 14(H) mm and it just fits snugly in the Tune Belt Armband.
The photos pretty much tell the whole story. You can see there are access holes at the bottom of the band that allows you to feed headphones through if you need to. In addition the blue Tune Belt tab is actually a Velcro tab as well that can be used to secure your extra head phone wires. I’ll be using Bluetooth the whole time so I don’t have to worry about it.
You’ll notice the top does not actually “close” or seal. This isn’t an issue if you have any type of case on your EVO as the case grips the inside enough to secure the phone inside. If your EVO is naked, I might be a little concerned with it being able to slide out of the case under certain circumstances.
I’ve included photos with the blue silicone case so you can see it better. I also got a photo in there with the Ventev (white) case. The silicone case does catch the inside of the band a little more due to the grippy nature, but nothing troublesome.
Some of the Amazon reviews mentioned the Velcro getting weak over time and I can see that happening as the Velcro isn’t the “heavier” Velcro that I’ve seen used on other items. Also, I have about 16 inch biceps right now and the band just fits about right. I’m working out now, so I went ahead and ordered the band extender since it’s only about a $1.50 more.
Here's the link to the full resolution gallery of photos: http://imgur.com/a/56D9X#0
Let me know if you have any questions!
Nice write up, I've been holding off for too long. Should be here Tuesday, running trails is no fun with a monster phone in my hand...
Sent from my EVO using xda premium
lazydazed said:
Nice write up, I've been holding off for too long. Should be here Tuesday, running trails is no fun with a monster phone in my hand...
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks.
Yeah I was too paranoid of something happening without a band or case so I wasn't using it, but now it's great.
I use it with "A HIIT Interval" (High Intensity Interval Training Timer) and it works great. (The timer vibrates the phone as well as an audio beep and I can feel the vibration through the armband)
Decent visibility through the case unless you have a bad angle and there's glare. I should have mentioned, touch screen works fine.
While I haven't had any issues with my Skinomi screen protector and the plastic screen on the armband, they do mention the risk of it sticking.