Thunderbolt in the pool. - Thunderbolt Q&A, Help & Troubleshooting

Like the stupid idiot I am, I took my phone for a swim while it quietly rested in my pocket. It's been in my pocket for about 5 minutes until I had noticed. I quickly jumped out, tried to turn it on, but it didn't want to. I took it to my house and took out the battery, the sd card, and the sim card for it to dry as well. However, I heard that if you put in your charger, it messed up everything? If it does, I'm so done for. My warranty doesn't cover water damages. Other than letting the phone and battery dry out in the sun, is there any more advice I should follow? It won't turn on at all. When I take out the back cover, I do see some water drops INSIDE the phone, and I can't get that to dry at all.

Put it in rice?

shadowskorch said:
Put it in rice?
Click to expand...
Click to collapse
I was told that method doesn't work and it's risky
EDIT: I guess I'll give it a try.

5 minutes is way too long for it to work. I lost a phone least year in less than 30 seconds in the pool. Sorry but i truly think you need to figure out how to get a new phone.
Sent from my thunderbolt

I'd say it may work but it may take a while. A couple years ago I accidentally took my phone swimming with me. It was in a while, too. Probably 10-15 minutes. It wouldn't work. Dried. It wouldn't work. For some random reason, months later I tried firing it up. It worked. It's now been donated to the kids to play around with. When it decided to start working again, I'm not positive, but it's still working 2 years later.
For those wondering, it was... I believe.. a Motorolla Krazr. Not exactly a smart phone, though. Best of luck.

khanam said:
5 minutes is way too long for it to work. I lost a phone least year in less than 30 seconds in the pool. Sorry but i truly think you need to figure out how to get a new phone.
Sent from my thunderbolt
Click to expand...
Click to collapse
Yeah when phone is on/ battery in it and water hits it for more the 20sec ur screwed. I dropped my tbolt in sink immediately pulled battery and stuck in rice after a couple hrs It worked.
Sent from my Thunderbolt using XDA Premium App

Took mine swimming 3 weeks after i got it and didn't have insurance. For whatever reason it didn't carry over from my dinc. After a few days in the sun and a few days in rice I was able to boot it up just long enough to unroot.
Went *****in at vzw store that my insurance should have been on my account. They treated it as a manufacture warranty, I forked over the 90 bucks like it was an insurance claim and walked out the store with a brand new bolt.
Sent from my ADR6400L using XDA Premium App

Just toss the phone and claim it lost.
Sent from my ADR6300 using XDA Premium App

ddgarcia05 said:
Just toss the phone and claim it lost.
Sent from my ADR6300 using XDA Premium App
Click to expand...
Click to collapse
Lol +1
Sent from my Thunderbolt using XDA Premium App

I think my warranty covers only hardware or software problems.
If I send it in and lie that it's either one of those, aren't I done for? I'm continuing you dry it, however, it's rooted. If they manage to get it on, aren't I screwed?

Prouder said:
I think my warranty covers only hardware or software problems.
If I send it in and lie that it's either one of those, aren't I done for? I'm continuing you dry it, however, it's rooted. If they manage to get it on, aren't I screwed?
Click to expand...
Click to collapse
Just to double check, you aren't paying for insurance are you?
Sent from my ThunderBolt using XDA Premium App

Whatever you do don't plug it in. Let it thoroughly dry out for at least a couple days, possibly using the rice method or placing it near a household item used to remove moisture from the air (sodium hydroxide if you have it). After a good few days try powering it on with just the battery.
It could also help to put a fan by it.
This worked with my friends iphone.
Note: anything you do is at your own risk.

Let it dry. My son went swimming with his nexus one and didn't notice until an hour later. We pulled the battery, used a vacuum to suck out any water and let it sit in a bowl of rice for 3 days. After turning it on it would not hold a charge. Replaced the battery and bingo good as new.
Your phone will mosf likely short circuit and kill power immediately when water hits it. This why you should not try to turn it on until you are certain it is dry.
Sent from my thunderstick

Time to get a new phone.
Did both of the things you told me not to do: tired to turn it on when it was wet and put it in the charger when it was SLIGHTLY wet, it was before i put it in rice.
Still gonna keep it in the rice and pray tho.

yeah, you did about everything you shouldn't do with wet electronics.
My wife washed my phone a few years ago in the washing machine. Pulled the battery, put everything in a bag of rice for a week. Charged it up and it came back to life. Screen was a little off for a while, but over time it came back to normal.
I've read you can also put it in the oven on warm for a couple of hours.

I put my old Motorola Q in the oven after my mom made a Turkey and it was cooling down... worked like a charm after
Edit: I wouldn't recommend it unless your careful
Sent from my NookColor using Tapatalk

My wife dropped her Samsung i730 in her glass of ice tea. It was only in there for a few seconds, but it was long enough. I dried it out the best I could, and put it in a bag of rice for 3 days. After the 3 days, it fired right up! I had to take a toothbrush and a little water to un-stick the buttons, but we used it for another year.
I was separating all of my old cell phones a few weeks ago to donate, and I came across my i730. I plugged it in, and it still works!
Give it time, you may be surprised that it will be ok.
Rob

On another note,
I fried my TB a month after I got it. Swimming as well. Tried drying it fast, vacuum and heat. Let sit for few hours and my patience ran out. Turned it on, and a sizzling sound came from the phone. Yup, bad news. I had insurance though so I shelled out the $100 for a replacement and chalked it up as a lesson learned.
Sent from my thunderstick

Missing out on RC4.. I guess it's a lesson learned for me as well

Related

Bricked my eris but not how your thinking

I couldn't find my phone last night so I decided to change the loads in the washer and look for it in the morning. I put the jeans in the dryer and it starts making this loud thump thump thump. I stop the dryer and look inside and guess what I found, you guessed it, my phone. Gotta smile. Now my options are as slim as my wallet. I can replace the eris with an old Palm treo or I can try and find an eris for cheep. Oh well, it was nice while it lasted. Guess I won't have to patiently wait for 2.1 OTA now.
Depends...
All depends on your budget. An Eris on ebay can be had for around $200
Plenty of decent verizon phones exist out there depending upon your needs though
we actually have a sign next to the start button of our washing machine saying to make sure you have your phone in your hand before starting. We lost 2 dumbphones last year to that happening. Try the sign. I have an HTC Touch Pro for big red if you want it (which you don't).
UPDATE! Got home from church and the phone powered up. Unfortunately it is showing an error screen. I am just going to leave it off for the next 24 hours and see what happens. A few years ago I dropped an old phone into my dad's pool and thought is was a goner but after a couple of days of drying it came back to life.
Here is a pic of the error message
Not sure if this is too late, but pull the battery and leave the cover off. Put the phone in a jar of rice for a day or two. The rice will help pull out the moisture. Good luck...
Try the rice thing it might still work.
Sent from my Eris using the XDA mobile application powered by Tapatalk
So as of last night the phone powered up but after a few minutes it shut down and wouldn't power back on until I removed the battery. So I stuck it in a cup of rice and am now just letting it sit. Thanks for the suggestion Elementix makes perfect sense (no pun intended). Also, thanks walkingtaco for the idea and offer for the phone. I have an old Palm treo 700p that I am muddling through with right now.
Well, even if the rice doesn't work you still might want to see about trying a different battery. The phone may be fine and it could be the battery's fault. Who knows..
Good point. My wife has an eris as well. I will steal her's to "test" then I might need to consider an extended battery. If that is the case anyone got any suggestions of a good quality extended battery.
anything by seido
Sent from my Evil Eris v1.1 using the XDA mobile application powered by Tapatalk
If the rice doesnt work, flush it out with 90% isopropyl alcohol and then let it dry in rice or near a fan.
The alcohol will evaporate any water and get rid of any contaminants. This usually works for most phones. I saved two or three dumbphones like this.
The rice should work. Make sure you take out the MicroSD card. That may be your problem. I completely submerged a G1 in water for 5 minutes as a test, then I washed it with 70% alcohol and stuck it in a zip-lock bag of rice for 2 days. The G1 still works perfectly and the rice pulled out all the moisture from everywhere... even the screen which looked terrible before and perfect after =)
Note: you may need to factory reset the device if the SD card was the problem.
BEST OF LUCK!
Thanks for all the advise and suggestions. I am happy to report that after a day of testing the eris seems to be back to 100%. I do think I am going to purchase an extended battery for it though at some point. Maybe if we ever get 2.1 to see how battery life does with the new os.

Got my Eris wet

Went swimming last and forgot my phone was in my pocket, it was only underwater for a minute till I pulled it out. I dried dried it off the best I could and even used a hair dryer but I think the screen is ruined. When I power it on it vibrates and the lights flash on like normal just the screen is blank.
Am I screwed?
Yes. Don't try taking it to Verizon either. Time to get on eBay
Sent from my nonsensikal froyo using XDA App
at this point I screwed up and have to but a new phone.
What?
Sent from my nonsensikal froyo using XDA App
Here's a fix...
First, your battery is definitely done. But the phone is not. Take the phone apart. Don't get too crazy just separate the main screen piece from the backing and battery cover. Then, fill a sandwich baggie with dry rice and put all the pieces in with it. Let it be for about 24 hours (longer is better). Put it back together. You should be good to go (hopefully your new battery has arrived). If there is moisture left in the the screen, it'll look funny but it dried out for me after a couple more days and looked normal.
Obviously, no guarantees here, but this has worked for me...twice. It's not a perfect fix but it'll save you a few bucks.
Thanks for the advice! everything is working but for some reason 3G is not which is very strange.
Don't leave the phone on the bed while you are having fun with your wife. Oh wait. Whenever I go to the steam room or next to a pool I keep my phone away from humidity.
lol ill keep that in mind, Right now I'm having a connection problem. wifi seems to work but really slow. Also I am unable to connect to 3G or any other network. I cant make or receive calls or surf the web. I tried wiping and flashing the newest TazzFroyo rom but I still have the same problem. Any ideas?
Maybe your radio was affected. The rice may not have helped it
Sent from my FroyoEris using XDA App
Threeball said:
First, your battery is definitely done. But the phone is not. Take the phone apart. Don't get too crazy just separate the main screen piece from the backing and battery cover. Then, fill a sandwich baggie with dry rice and put all the pieces in with it. Let it be for about 24 hours (longer is better). Put it back together. You should be good to go (hopefully your new battery has arrived). If there is moisture left in the the screen, it'll look funny but it dried out for me after a couple more days and looked normal.
Obviously, no guarantees here, but this has worked for me...twice. It's not a perfect fix but it'll save you a few bucks.
Click to expand...
Click to collapse
Best advice ever given on xda. Im an electronics repair guy for the army and whenever someone brings us a wet device we do exactly this. Take it apart as much as your skills allow and you are comfortable with, then leave it in rice for a couple days. After all this take some canned air and blow it out to make sure there isnt any dirt or particles in there and put it back together...
悲剧,i am sad
I have dropped my phone in water for 30 seconds or so and pulled the battery as fast as I could, then placed everything (taken as far apart as I could) on my radiator on top of a couple of pencils (to avoid direct contact) for a couple days and my phone has never shown any problems including battery.

[Q] Atrix Won't Boot - Juice Spill..

Had a small amount of juice spilled onto my Atrix.. won't boot anymore, just get the solid green light any nothing further..
Tried battery out many times obviously, trying to let it sit in the sun to dry.. no SIM, even no battery and on A/C to no avail..
Any ideas?
Had a spill on mine before. For future reference immediately remove battery sim and sd and toss it in some rice. Leave it for a long while mine worked fine after at first it was convinced it had headphones in had to had to jam a qtip with rubbing alcohol got it cleaned up works good as new
Sent from my MB860 using XDA App
Thanks - how long is a long while? I've left it for 1.5hrs this time round. Does it "reset" any of the moisture timers if you attempt to boot it?
I've tried leaving it for 10-20 mins at a time before checking.. as I say though this time I've left it for 1.5hrs so far. There was barely any juice inside the handset and I opened it up immediately.. no rice though..
It can take a day or two to completely dry and function normally.
Sent from my MB860 using Tapatalk
Well, after 24 hours my Atrix would still not boot. The moisture stickers were still normal, and aesthetically it is still in mint condition.
I took it into my carrier this morning, and they had a look and the "engineer" said the motherboard must be faulty, and replaced it on the spot..!
I am not back on Froyo, applying the 2.3 OTA.. time to unlock/ROM when I get home.
callsignapollo said:
Well, after 24 hours my Atrix would still not boot. The moisture stickers were still normal, and aesthetically it is still in mint condition.
I took it into my carrier this morning, and they had a look and the "engineer" said the motherboard must be faulty, and replaced it on the spot..!
I am not back on Froyo, applying the 2.3 OTA.. time to unlock/ROM when I get home.
Click to expand...
Click to collapse
Good that you got a replacement. Note that liquids in electronics can take a LONG time to dry. I washed an iPod Nano once and stuck it in a bag of rice to dry. I tried turning it on every day and after day 6 it finally worked.
cjrhoades said:
Note that liquids in electronics can take a LONG time to dry.
Click to expand...
Click to collapse
Yeah, I mean I figured I was just going to send it for warranty (and hope), given the situation.. but a replacement well, can't complain.
It was under 3 months old, there was some sort of special warranty period under 3 months on the form, and plus as I say there was no visible damage on it so perhaps that is why they just replaced it.
My Atrix 4g thinks it has headphones after a juice spill...
freshbakd said:
Had a spill on mine before. For future reference immediately remove battery sim and sd and toss it in some rice. Leave it for a long while mine worked fine after at first it was convinced it had headphones in had to had to jam a qtip with rubbing alcohol got it cleaned up works good as new
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Hi freshbakd,
I had a Mango juice (natural one) spill into my Atrix 4G and the Mobile is working good but as yours, it thinks it has the headphones plugged in :S. Could you describe how did you clean it, where did you insert the qtip and what kind of qtip (by the way, what is a qtip? ).
Thanks!

Water Damaged EVO 3D. Possible to Fix?

Last week, my friend's EVO 3D was water damaged. He was going to throw it out but I offered him $25 for it and he gave it to me. When I try turning it on, it vibrates, the buttons at the bottom light up but the screen doesn't seem to turn on. Is there any chance of fixing it?
Hmm well it might be but It's hard to tell if the board got damaged or just the screen. If u really want to fix it buy one off eBay or Craigslist with a broken screen and swap internals. At least that's what I'd do
Sent from my PG86100 using xda premium
Try drying it out totally before using it. Take the back cover off, take battery out, stick main unit in a ziploc bag full of rice and leave it alone for 3 days. The rice will suck up every last drop of moisture that would otherwise take weeks to evaporate out.
^^ awesome idea forgot to mention that rice is like a miracle worker I've saved many a phone that have taken full swims just by throwing them in a bag of rice for a couple days
Sent from my PG86100 using xda premium
Nanan00 said:
Try drying it out totally before using it. Take the back cover off, take battery out, stick main unit in a ziploc bag full of rice and leave it alone for 3 days. The rice will suck up every last drop of moisture that would otherwise take weeks to evaporate out.
Click to expand...
Click to collapse
Alright. I'll try that even though it was water damaged over a week ago. Maybe there's still some left...?
it. said:
Last week, my friend's EVO 3D was water damaged. He was going to throw it out but I offered him $25 for it and he gave it to me. When I try turning it on, it vibrates, the buttons at the bottom light up but the screen doesn't seem to turn on. Is there any chance of fixing it?
Click to expand...
Click to collapse
there is a chance. but probably would require an extensive knowledge of circuitry and i'm guessing since you don't know where to even start... probably not going to happen. lol
don't take that the wrong way by the way, it just sounds very grim to me.
cobraboy85 said:
there is a chance. but probably would require an extensive knowledge of circuitry and i'm guessing since you don't know where to even start... probably not going to happen. lol
don't take that the wrong way by the way, it just sounds very grim to me.
Click to expand...
Click to collapse
LOL. Yeah, I thought it was a long shot. I'll try the rice thing for a couple of days but I'm not getting my hopes up. I thought it was worth a try for $25
Mine survived being totally submerged in water when it fell in a puddle. at first the screen didn't work at all, then it flickered, then it had some lines on the screen, then after one day it was fully functional in every aspect haha, all I did was put it in rice, and all is well... Now I just wish I had waited to file an insurance claim, as now I'm stuck with a refurbished with 1.5
Sent from my PG86100 using xda premium
Well I would investigate some "tear down youtube videos" get the basic layout of the internals. Etc etc, maybe look into replacing the screen/digitizer
After you dry it out if screen still doesn't turn on, turn it on and leave it on for awhile, with caution... See if goes up in flames...would make an epic video if it does btw, but if something is damaged I would assume it would short out, and fry some stuff... Vibration means something is gettin power...
Shot from my sharp shooter in 3d
It's too late now to do the rice trick. If there was water on the board and the user tried to turn it on, the damage has already been done and chips were probably fried.
hitman4274 said:
Well I would investigate some "tear down youtube videos" get the basic layout of the internals. Etc etc, maybe look into replacing the screen/digitizer
After you dry it out if screen still doesn't turn on, turn it on and leave it on for awhile, with caution... See if goes up in flames...would make an epic video if it does btw, but if something is damaged I would assume it would short out, and fry some stuff... Vibration means something is gettin power...
Shot from my sharp shooter in 3d
Click to expand...
Click to collapse
the "with caution" part, here, should simply be don't turn it on at all. turning it on with water or moisture still present internally could damage it beyond repair (if that isn't the case already).
pull the battery out, and throw it in a very large, sealed Ziploc, bag of rice for a few days, maybe even longer - and cross your fingers. if it doesn't work after that. I wouldn't put anymore time and certainly not anymore money into it.
and yes it was worth a shot for only 25 bucks, for sure. I would have given it a try for that price.
I had a HD2 with the same problem. your screwed dude. Sorry. No amount rice is going to save that phone.
Yep, I think the only thing that saved mine, when it was totally submerged, is that the battery was completely dead, so nothing got power.
Sent from my PG86100 using xda premium
it. said:
Last week, my friend's EVO 3D was water damaged. He was going to throw it out but I offered him $25 for it and he gave it to me. When I try turning it on, it vibrates, the buttons at the bottom light up but the screen doesn't seem to turn on. Is there any chance of fixing it?
Click to expand...
Click to collapse
Take the phone apart and try this, with just the board, an alcohol (as pure as you can get) soak for 2-5mins then air dry (let sit for 1-2hours). Reassemble and test. As the alcohol evaporates, it extracts water out of the circuitry. But, as it has been mentioned, powering it on prior to a full dry may have already fried it.
Sent with L*W*H
Theres no science behind water damage, if you've turned it on already then it's too late for any measures to be taken.
In future, if you drop it in water, remove it straight away, remove everything from the phone, try to get as much water out as you can, then pop it in a bowl of dry rice for as long as you can, months would be best, simply assume that the phone is gone and do not switch it on until you can assure that it is completely dry, any other measures you can take seldom work but some have had results, the rice trick is as good as it gets tbh.
Avoid water like the plague with your phone.
Please help!
So I bought the HTC Evo 3D and had it for about 20 hours before I drowned it in a cup of tea (yes I was drunk) where it sat for a couple of minutes before it was discovered. As soon as it was discovered, I turned it off and removed the battery. It sat over night band in the morning I turned it back on and it works. But I immediately realized that there was still water at the bottom of the screen. I again turned it off and removed the battery and it has been sitting in rice for over a week. There is still water at the bottom of the screen! I'm so frustrated! I don't have a cell phone repair place where I live and I have no experience with working on cell phones. I have even tried using a blow dryer a little but am worried that the heat will harm the screen. My sister suggested just trying to used the phone and the heat from the phone working would evaporate the left over water but I am also afraid of frying things too. Any suggestions???
You turned it on while it was still wet. It's done for. Time for a new phone.
Sugar or colorants that were in the tea could have made that mark on the bottom of the screen
Anyway, i really don't think is there anything you can do.
Sent from my HTC EVO 3D X515m using xda app-developers app
Uncle Lizard said:
You turned it on while it was still wet. It's done for. Time for a new phone.
Click to expand...
Click to collapse
Exactly. Even if you get all the water out, you likely fried the board somewhere. If you still want an evo 3d, they are pretty old now, you should be able to get one on ebay for under 50 bucks.
You could attempt to take your phone apart and clean all the internals with rubbing alcohol but chances are your phone is past-out for ever
(Don't ask me for help as I couldn't care if your phone explodes, eh! )

chlorine damage?

Today i went swimming an my kid took off with my phone an it went into the pool. I was told it was water proof an when i pool it out the phone turns gray an powers off.. ive gotten it wet before by accident an it was just fine.. i have it in rice now but im asking is it a goner?
Could be. They are not waterproof, they are splash resistant. Still wish it's only a minor incident
Powered by Tapatalk 2
Its been in rice for 14 hrs should I try plug it in? I don't want to fry it...
Sent from my DROID4 using xda premium
GraphicDemon said:
Its been in rice for 14 hrs should I try plug it in? I don't want to fry it...
Sent from my DROID4 using xda premium
Click to expand...
Click to collapse
The best way at least that i can think of is to manually disassemble the phone and wipe it to dry by yourself,rise wont make it dry,try to power on the phone in a week or so,when the phone is dry.
chlorine h2o damage
DanielMod said:
The best way at least that i can think of is to manually disassemble the phone and wipe it to dry by yourself,rise wont make it dry,try to power on the phone in a week or so,when the phone is dry.
Click to expand...
Click to collapse
Actually rice is a natural absorbent, it can in fact, save your phone as it has with my iPod Touch 32gb, though not a razr, it has all similar mobile device components inside, and I didn't even take it apart, left it in a Tupperware full of rice for a few days, after I used a good hair-dryer to evaporate the large stuff. We're still talking about a non-serviceable internal battery (just like our Droid RAZR).
Even though it didn't properly start-up within a day after leaving it in the rice for a few days, the darn thing started right up as if right out of the box about a week later.
So lesson learned, technology is amazing, unpredictable, and very servicable, no matter what.
Though, the idea of taking it apart is a good one because by having water damage your warranty is voided atm.
Go for it!!! :good:
sparkpc said:
Actually rice is a natural absorbent, it can in fact, save your phone as it has with my iPod Touch 32gb, though not a razr, it has all similar mobile device components inside, and I didn't even take it apart, left it in a Tupperware full of rice for a few days, after I used a good hair-dryer to evaporate the large stuff. We're still talking about a non-serviceable internal battery (just like our Droid RAZR).
Even though it didn't properly start-up within a day after leaving it in the rice for a few days, the darn thing started right up as if right out of the box about a week later.
So lesson learned, technology is amazing, unpredictable, and very servicable, no matter what.
Though, the idea of taking it apart is a good one because by having water damage your warranty is voided atm.
Go for it!!! :good:
Click to expand...
Click to collapse
Taking it apart will not stop the warranty from being voided. There is a water sensor that was activated the moment it got wet and cannot be returned to its original state.
Rice only gets rid of humidity, corrosion will start anyway. It WILL destroy the phone sooner or later.
Szadzik said:
Taking it apart will not stop the warranty from being voided. There is a water sensor that was activated the moment it got wet and cannot be returned to its original state.
Rice only gets rid of humidity, corrosion will start anyway. It WILL destroy the phone sooner or later.
Click to expand...
Click to collapse
yeah happened to my girlfriend evo 3d wouldnt charge after awhile... im really not good with taking things apart.. lol also i tried pluging it in it went to the charging part when it boots up with charger, but wouldnt power on fully.. an eventually started rebooting over n over so back in rice for couple days i guess hope i didnt fry it...
GraphicDemon said:
yeah happened to my girlfriend evo 3d wouldnt charge after awhile... im really not good with taking things apart.. lol also i tried pluging it in it went to the charging part when it boots up with charger, but wouldnt power on fully.. an eventually started rebooting over n over so back in rice for couple days i guess hope i didnt fry it...
Click to expand...
Click to collapse
There is a 'sonic' bath or somethiing like that that you can perform that is supopsed to get rid of corosion, but you would have to find someone with equipment to do that. Assuming of course that connecting it to the charger did not fry it.
Sorry to hear about your badluck.
Disconnect from btty.
Chlorine should dissipate but you could have problems if you tried charging prior to the phone being fully dry, or if the btty was left in for too long. Alcohol is usually used to clean electronics but I forgot what type doesn't leave a residue.
The rice bath for a couple of days should dry the phone (alcohol also helps to dry the phone), but I would be concerned about btty damage. The content of the btty could have leaked.
If you have insurance turn it in!
i remember using rubbing alcohol, aka methanol should work. try taking a look at XDA tv. there was one instance the guy was *****ing about the Razr not having a removable battery and he opened his galaxy nexus and dipped it in methanol
Szadzik said:
Taking it apart will not stop the warranty from being voided. There is a water sensor that was activated the moment it got wet and cannot be returned to its original state.
Rice only gets rid of humidity, corrosion will start anyway. It WILL destroy the phone sooner or later.
Click to expand...
Click to collapse
newowner said:
Sorry to hear about your badluck.
Disconnect from btty.
Chlorine should dissipate but you could have problems if you tried charging prior to the phone being fully dry, or if the btty was left in for too long. Alcohol is usually used to clean electronics but I forgot what type doesn't leave a residue.
The rice bath for a couple of days should dry the phone (alcohol also helps to dry the phone), but I would be concerned about btty damage. The content of the btty could have leaked.
If you have insurance turn it in!
Click to expand...
Click to collapse
So just say the battery failed on me? Ik theyll be able to tell its water damaged but lol yeah.. So just call n say that?
Hell yeah survived lol i love my razr!
Sent from my DROID RAZR using XDA Premium App
GraphicDemon said:
So just say the battery failed on me? Ik theyll be able to tell its water damaged but lol yeah.. So just call n say that?
Click to expand...
Click to collapse
Insurance will cover anything.
Sent from my DROID RAZR using Tapatalk 2
if you do take it apart pick up some Denatured Alcohol from a Home Depot type store and use that to clean the inside. It will help prevent corrosion and it is perfectly safe to use on any part of the phone.
My friend had the same thing happen, he took off the back took out only the battery, then grabbed alcohol 99% and distilled water, made a 50/50 solution and put it in a ultrasonic jewelry cleaner for like 30 min, then in a bag of silica gell (those tiny paper bags that say to not eat) Left it there for 2 days, works just fine.
Rice fixed it two days open sd card slot n it working like a charm
Sent from my DROID RAZR using XDA Premium HD app

Categories

Resources