Related
Hi guys.
Here's a little update what i've done with my phone.
Last night i have flashed ICS KP8 through ODIN.
I have reverted to GB this morning 2.3.5 and now i want to flash my stock firmware 2.3.4 I9100XWKI4 (TWO).
I have downloaded the desired ROM (I9100XWKI4_I9100XXKI1_I9100OXFKE1_HOME.tar.md5) from SAMMMOBILE but when i extracted it it only contains 1 file of size 539MB.
So...this is my question...where am i supposed to put that file in ODIN and do i need something else or just this file?
Tnx in advance
Follow instructions from the firmware provider makes sense .
No idea whats in the file from another forum .
Usual is to flash tar via PDA .
jje
Charlie Wax said:
Hi guys.
Here's a little update what i've done with my phone.
Last night i have flashed ICS KP8 through ODIN.
I have reverted to GB this morning 2.3.5 and now i want to flash my stock firmware 2.3.4 I9100XWKI4 (TWO).
I have downloaded the desired ROM (I9100XWKI4_I9100XXKI1_I9100OXFKE1_HOME.tar.md5) from SAMMMOBILE but when i extracted it it only contains 1 file of size 539MB.
So...this is my question...where am i supposed to put that file in ODIN and do i need something else or just this file?
Tnx in advance
Click to expand...
Click to collapse
Maybe it's a one part .tar file? (Just to put in PDA)
Pls write the name of file here.
But to get sure, download the firmware, u want, from here:
http://forum.xda-developers.com/showthread.php?t=1075278
Flash like instruction says and all should be fine
PS: If u want to be sure what's on with downloaded file, pls complete name...
CHEERS
Tar.md5 "one big file" roms just go in the PDA slot and Odin will work it out.
The md5 bit just means that Odin will do a checksum to make sure the file isn't corrupt, so no need to extract it.
Also make sure you flash the GB bootloaders first, available in the thread linked above
Sent from my GT-I9100 using Tapatalk
Hannibal226 said:
Maybe it's a one part .tar file? (Just to put in PDA)
Pls write the name of file here.
But to get sure, download the firmware, u want, from here:
http://forum.xda-developers.com/showthread.php?t=1075278
Flash like instruction says and all should be fine
PS: If u want to be sure what's on with downloaded file, pls complete name...
CHEERS
Click to expand...
Click to collapse
The name of a zip. file is I9100XWKI4_I9100OXFKE1_TWO.zip. Exctracted file name is writen in OP.
P.S. do i need to tick repartition?
veyka said:
Tar.md5 "one big file" roms just go in the PDA slot and Odin will work it out.
The md5 bit just means that Odin will do a checksum to make sure the file isn't corrupt, so no need to extract it.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Hold on a sec...you want to say that i don't have to extract it all...
Damn...is it possible that Windows recognized it as zip. file
Charlie Wax said:
The name of a zip. file is I9100XWKI4_I9100OXFKE1_TWO.zip. Exctracted file name is writen in OP.
P.S. do i need to tick repartition?
Click to expand...
Click to collapse
You will not need to put a pit in or repartition
Sent from my GT-I9100 using Tapatalk
Charlie Wax said:
Hold on a sec...you want to say that i don't have to extract it all...
Damn...is it possible that Windows recognized it as zip. file
Click to expand...
Click to collapse
I don't know, I would just download a rom from intatechs thread and follow his guide.
Sent from my GT-I9100 using Tapatalk
veyka said:
I don't know, I would just download a rom from intatechs thread and follow his guide.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Can't find it on inratech's pages...
Well...WTH...i'll try it...wish me luck LOL
Hello,
im new here. Im from Germany and i bought my s2 from amazon.co.uk in may. I think its the GT-I9100LKAXEU, but im not sure.
I need a old 3-parts firmware, with which i can use the pit file and then update it then with kies.
The reason is that my headphone-socket is a bit damaged and i want to give it for warranty
excuse me for my not so perfect english
Thanks a lot
here for unbranded http://forum.xda-developers.com/showthread.php?t=1075278
and here for branded http://forum.xda-developers.com/showthread.php?t=1113928
but i need a official firmware with seperate files for csc, pda and phone, where i can use the pit file
sk91s2 said:
but i need a official firmware with seperate files for csc, pda and phone, where i can use the pit file
Click to expand...
Click to collapse
Why do you want to use a PIT file .
Rule is do not use PIT only for experienced users .
Three part firmware is on samfirmware .
For warranty flash stock firmware from link given if rooted or custom rom reset rom counter with USB jig is the method used .
jje
sk91s2 said:
but i need a official firmware with seperate files for csc, pda and phone, where i can use the pit file
Click to expand...
Click to collapse
No, you don't.
JJEgan said:
Why do you want to use a PIT file .
Rule is do not use PIT only for experienced users .
Three part firmware is on samfirmware .
For warranty flash stock firmware from link given if rooted or custom rom reset rom counter with USB jig is the method used .
jje
Click to expand...
Click to collapse
^^ this
mariosraptor said:
here for unbranded http://forum.xda-developers.com/showthread.php?t=1075278
and here for branded http://forum.xda-developers.com/showthread.php?t=1113928
Click to expand...
Click to collapse
These are official.
do u know what is ur CSC ?
I think its also fine if you simply flash a stock firmware via recovery and then flash a stock kernel through odin. no need for anything else afaik
cyanoviper said:
I think its also fine if you simply flash a stock firmware via recovery and then flash a stock kernel through odin. no need for anything else afaik
Click to expand...
Click to collapse
How can he flash stock via recovery ???????????????
jje
JJEgan said:
How can he flash stock via recovery ???????????????
jje
Click to expand...
Click to collapse
He can use mobile odin as long as he is rooted.
Sent from my GT-I9100 using xda premium
You don't need a "3 part" FW, there is no need for all "parts" being seperate.
The ROMs in Intratech's thread contain everything needed, you can say "all 3 parts are packed into the one file".
Just flash a matching one of those.
Hi guys,
i need a 3 part firmware for GT-I9300 because i have a problem with my phone.
Plz help me. :crying:
Thanks
ValoX
What kind problem?
Sent from my GT-I9300 using Tapatalk 2
Spontaneous reboots. And other. My firmware was corrupted when I installed the CM9. I tried the reset and wipe. But with no result. I tried also with more flash of the stock firmware.
Sorry for my bad English.
3 part firmware is found at sammobile.com
jje
Please give me the link. I didn't found it.
Please help me! :crying:
ValoXis said:
Please help me! :crying:
Click to expand...
Click to collapse
Here is the downloadlink for a unbranded Italian rom http://www.hotfile.com/dl/160760211/17a8084/I9300XXALF6_I9300ITVALF1_ITV.zip.html.
Extract it once (from .rar to .tar), password sammobile.com and flash it with Odin v 3.04.
Its 1 file and put it in PDA, boot in downloadmode and flash it.
Unfortunately this is not necessary. To solve my problem it requires the firmware in 3 parts.
why 3 parts, 1 part will do!
Verstuurd van mijn GT-I9300 met Tapatalk
I need to do the deep clean 2.
The problem is the same: http://forum.xda-developers.com/showthread.php?t=1721559
How to solve it?
I had a similar issue when flashing something with Mobile Odin went wonky. I was able to get into download mode and flash a stock firmware via full Odin but after that I was stuck at the splash screen. I solved the problem by booting into Samsung recovery (vol up + home + Power) and performed a factory reset there. I was then able to boot into the OS and start from scratch.
Follow his method use one file
Sent from my GT-I9300 using Tapatalk 2
With one file firmware the problem remains. It need 3 parts firmware (CODE, MODEM, CSC)
go ask here http://forum.xda-developers.com/showthread.php?t=1671969
browse 1st
ValoXis said:
With one file firmware the problem remains. It need 3 parts firmware (CODE, MODEM, CSC)
Click to expand...
Click to collapse
Why ??? one part firmware includes those three .
But as said 3 part firmware = sammobile .
jje
apisfires said:
go ask here http://forum.xda-developers.com/showthread.php?t=1671969
browse 1st
Click to expand...
Click to collapse
Thanks. But this don't solve my problem.
JJEgan said:
Why ??? one part firmware includes those three .
But as said 3 part firmware = sammobile .
jje
Click to expand...
Click to collapse
I didn't found it! If you have it please give me the link.
Just flash the corresponding firmware from SamFirmware.com
When finished, boot to the stock recovery and factory-reset the phone
If it still does not work, resume complaining about needing a 3-part firmware
Howver the firmwares on SamFirmware have the 3 files bundled in one flash-file, so just do it...
d4fseeker said:
Just flash the corresponding firmware from SamFirmware.com
When finished, boot to the stock recovery and factory-reset the phone
If it still does not work, resume complaining about needing a 3-part firmware
Howver the firmwares on SamFirmware have the 3 files bundled in one flash-file, so just do it...
Click to expand...
Click to collapse
If I use a SamMobile firmware, that firmware is all-in-one?
ValoXis said:
Thanks. But this don't solve my problem.
I didn't found it! If you have it please give me the link.
Click to expand...
Click to collapse
If you cannot find what you require then it may be worth asking on sammobile forum for what you require .
Only 3 part firmware i have ever seen is on sammobile although that was SGS1 and 2 models in the past presumed that sammobile supplied 3 part for SGS3 might be wrong as you are the only one ever mentioned 3 part firmware .
jje
You could've just flashed the corresponding firmware from samfirmware and followed through on the description to check if it works.
I'm sure there are people who could convert the 1-file firmware to a 3-file firmware for you but what would be the point given that the one file holds everything you need?
First of all, the site has only download it
Slim-GT-I9100-2.9.0-OFFICIAL
And not
device_x.x.zip, slim_gapps.zip.
The second thing I do not understand how to install
I have an original ics 4.0.4 on Samsung's device
aviiiii said:
First of all, the site has only download it
Slim-GT-I9100-2.9.0-OFFICIAL
And not
device_x.x.zip, slim_gapps.zip.
The second thing I do not understand how to install
I have an original ics 4.0.4 on Samsung's device
Click to expand...
Click to collapse
is ur phone rooted, if not Root ur phone first, then only u can install the custom rom of ur choice
aviiiii said:
First of all, the site has only download it
Slim-GT-I9100-2.9.0-OFFICIAL
And not
device_x.x.zip, slim_gapps.zip.
The second thing I do not understand how to install
I have an original ics 4.0.4 on Samsung's device
Click to expand...
Click to collapse
Hi mate. You have a bit if reading to do before you flash a custom rom. Firstly you need to root your device then follow the instructions on the slim website. There is full guidance supplied in the sticky threads of this forum.
Sent from my GT-I9100 using xda premium
slim rom is mot likely a cwm zip file instead of tar file. you will need to be rooted with cwm manager to flash this file.
my s2 is roted
icant andestend it becuse They wrote that there are two files
But the site has only downloads one file and is not
tar
aviiiii said:
my s2 is roted
icant andestend it becuse They wrote that there are two files
But the site has only downloads one file and is not
tar
Click to expand...
Click to collapse
You need to do a lot of reading and research before you even think about flashing your device. If you don't, you're probably going to brick your phone..
Sent from my GT-I9100 using xda premium
i have take rom with Odin
From 2.3.5
To 4.0.4
But things are different
I do not understand what it flsh device it through Odin?
In any case it's not about it its about fiels they say in one base and one file i9100
But in the downloads page its not two files have only one.
and its not a tar
you are talking about the latest slim bean rom. It has to be flashed through cwm afterwards you need download gapps and other related files as the rom does not come with these included.
Hi, as the title says I have I9300XXDLJ4 and I would like to update to Indian I9300XXDLJ5; as this is not available with my CSC, I'd like to update just the ROM and the modem.
Is there a way to do this? It should be enough, as the RIL files should be in ROM, right?
Thank you and regards!
flash via odin
gpvecchi said:
Hi, as the title says I have I9300XXDLJ4 and I would like to update to Indian I9300XXDLJ5; as this is not available with my CSC, I'd like to update just the ROM and the modem.
Is there a way to do this?
Thank you and regards!
Click to expand...
Click to collapse
Good Question :highfive: :silly:
By the way..are you trying to increase your post count????
Just asking..
Anyways..there are atleast 4 threads with the same purpose in the General Section (Last I counted)..and numerous others asking the same question which you have asked...
Don't you think...creating a new thread just for it was pointless??
[EDIT] After having another look ...I believe you don't want to flash the kernel...for it you have 2 options:
Flash via odin: Download the firmware ..extract the tar.md5...delete the boot.img from the archive..pack it again in a tar file and flash
Flash via CWM..download the ROM..delete the boot.img from the zip....go inside META-INF>COM>GOOGLE>ANDROID>updater-script and delete the commands that flash the kernel..
gpvecchi said:
Hi, as the title says I have I9300XXDLJ4 and I would like to update to Indian I9300XXDLJ5; as this is not available with my CSC, I'd like to update just the ROM and the modem.
Is there a way to do this?
Thank you and regards!
Click to expand...
Click to collapse
Yup! There is always a way to do it on XDA.
You can use Odin to flash the firmware to your phone... it's much better than Kies trust me.
Here is the complete step by step guide to update to the latest firmware.
http://forum.xda-developers.com/showthread.php?t=1671969&highlight=guide+flash+odin
Download the India JB from here
http://hotfile.com/dl/178823903/8988da1/Samsung-Updates.com-GT-I9300_INU_1_20121030111612_3c74wt27ua.zip.html
Dont forget to hit the Thanks button if I Helped!
A simple search could give the OP an answer.
Thread closed.