Hi guys.
Here's a little update what i've done with my phone.
Last night i have flashed ICS KP8 through ODIN.
I have reverted to GB this morning 2.3.5 and now i want to flash my stock firmware 2.3.4 I9100XWKI4 (TWO).
I have downloaded the desired ROM (I9100XWKI4_I9100XXKI1_I9100OXFKE1_HOME.tar.md5) from SAMMMOBILE but when i extracted it it only contains 1 file of size 539MB.
So...this is my question...where am i supposed to put that file in ODIN and do i need something else or just this file?
Tnx in advance
Follow instructions from the firmware provider makes sense .
No idea whats in the file from another forum .
Usual is to flash tar via PDA .
jje
Charlie Wax said:
Hi guys.
Here's a little update what i've done with my phone.
Last night i have flashed ICS KP8 through ODIN.
I have reverted to GB this morning 2.3.5 and now i want to flash my stock firmware 2.3.4 I9100XWKI4 (TWO).
I have downloaded the desired ROM (I9100XWKI4_I9100XXKI1_I9100OXFKE1_HOME.tar.md5) from SAMMMOBILE but when i extracted it it only contains 1 file of size 539MB.
So...this is my question...where am i supposed to put that file in ODIN and do i need something else or just this file?
Tnx in advance
Click to expand...
Click to collapse
Maybe it's a one part .tar file? (Just to put in PDA)
Pls write the name of file here.
But to get sure, download the firmware, u want, from here:
http://forum.xda-developers.com/showthread.php?t=1075278
Flash like instruction says and all should be fine
PS: If u want to be sure what's on with downloaded file, pls complete name...
CHEERS
Tar.md5 "one big file" roms just go in the PDA slot and Odin will work it out.
The md5 bit just means that Odin will do a checksum to make sure the file isn't corrupt, so no need to extract it.
Also make sure you flash the GB bootloaders first, available in the thread linked above
Sent from my GT-I9100 using Tapatalk
Hannibal226 said:
Maybe it's a one part .tar file? (Just to put in PDA)
Pls write the name of file here.
But to get sure, download the firmware, u want, from here:
http://forum.xda-developers.com/showthread.php?t=1075278
Flash like instruction says and all should be fine
PS: If u want to be sure what's on with downloaded file, pls complete name...
CHEERS
Click to expand...
Click to collapse
The name of a zip. file is I9100XWKI4_I9100OXFKE1_TWO.zip. Exctracted file name is writen in OP.
P.S. do i need to tick repartition?
veyka said:
Tar.md5 "one big file" roms just go in the PDA slot and Odin will work it out.
The md5 bit just means that Odin will do a checksum to make sure the file isn't corrupt, so no need to extract it.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Hold on a sec...you want to say that i don't have to extract it all...
Damn...is it possible that Windows recognized it as zip. file
Charlie Wax said:
The name of a zip. file is I9100XWKI4_I9100OXFKE1_TWO.zip. Exctracted file name is writen in OP.
P.S. do i need to tick repartition?
Click to expand...
Click to collapse
You will not need to put a pit in or repartition
Sent from my GT-I9100 using Tapatalk
Charlie Wax said:
Hold on a sec...you want to say that i don't have to extract it all...
Damn...is it possible that Windows recognized it as zip. file
Click to expand...
Click to collapse
I don't know, I would just download a rom from intatechs thread and follow his guide.
Sent from my GT-I9100 using Tapatalk
veyka said:
I don't know, I would just download a rom from intatechs thread and follow his guide.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Can't find it on inratech's pages...
Well...WTH...i'll try it...wish me luck LOL
Related
Hi Guys
Quick noob question
When you flash a single file using odin (for example the official XWKE7 in the rom flash guide), and you put this file in the PDA section, does this update the MODEM and CSC as well on the phone?
why there is one ROM file not 3 files to be put in the PDA, MODEM, and CSC sections of Odin
Thanks
RADLOUNI said:
Hi Guys
Quick noob question
When you flash a single file using odin (for example the official XWKE7 in the rom flash guide), and you put this file in the PDA section, does this update the MODEM and CSC as well on the phone?
why there is one ROM file not 3 files to be put in the PDA, MODEM, and CSC sections of Odin
Thanks
Click to expand...
Click to collapse
There are some ROMs (like those stock ones) that have everything contained within the one file.
re-partition
pulser_g2 said:
There are some ROMs (like those stock ones) that have everything contained within the one file.
Click to expand...
Click to collapse
Thanks
what about re-partition and pit file, i have read in the guide that they should not be used
why is that ? what is the function of the pit file and when should we choose to re-partition?
Follow instructions for each individual firmware.
jje
Sent from my GT-I9100 using XDA Premium App
Hello. I just downloaded 2.2.1 Froyo (S5830DXKC1) firmware from Samfirmware site. I'm confuse on how to use this file. Can you help me. Thanks. Below is the files.
1. S5830DXKC1_OLBKC1_DXKC1.rar (I extracted this one and got another RAR file(#2))
2. S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar (Extracted this one also and got files below(#3-#7))
3. amss
4. csc.rfs
5. boot.img
6. recovery.img
7. system.rfs
Do I need to use Odin? How? Or another application?
droidtwoseven said:
Hello. I just downloaded 2.2.1 Froyo (S5830DXKC1) firmware from Samfirmware site. I'm confuse on how to use this file. Can you help me. Thanks. Below is the files.
1. S5830DXKC1_OLBKC1_DXKC1.rar (I extracted this one and got another RAR file(#2))
2. S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar (Extracted this one also and got files below(#3-#7))
3. amss
4. csc.rfs
5. boot.img
6. recovery.img
7. system.rfs
Do I need to use Odin? How? Or another application?
Click to expand...
Click to collapse
Are you planning to downgrade ? If so don't use this file
Sent from my Ultma Weapon using XDA App
EmoBoiix3 said:
Are you planning to downgrade ? If so don't use this file
Sent from my Ultma Weapon using XDA App
Click to expand...
Click to collapse
Yes, if I didn't successfully flash 2.3.3
droidtwoseven said:
Yes, if I didn't successfully flash 2.3.3
Click to expand...
Click to collapse
That's a one package file. But, IF u planning on downgrade, u need to find a full-package file first. Than flash the one-package DXKC1.
izzoe said:
That's a one package file. But, IF u planning on downgrade, u need to find a full-package file first. Than flash the one-package DXKC1.
Click to expand...
Click to collapse
Where can I download the full-package? Thanks.
droidtwoseven said:
Where can I download the full-package? Thanks.
Click to expand...
Click to collapse
Samfirmware.com
izzoe said:
Samfirmware.com
Click to expand...
Click to collapse
As already downloaded firmwares from samfirmware site, they only provide one package.
Cheers!
droidtwoseven said:
As already downloaded firmwares from samfirmware site, they only provide one package.
Cheers!
Click to expand...
Click to collapse
The first one from samfirmware is a full package. S5830XXJLC
droidtwoseven said:
Hello. I just downloaded 2.2.1 Froyo (S5830DXKC1) firmware from Samfirmware site. I'm confuse on how to use this file. Can you help me. Thanks. Below is the files.
1. S5830DXKC1_OLBKC1_DXKC1.rar (I extracted this one and got another RAR file(#2))
2. S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar (Extracted this one also and got files below(#3-#7))
3. amss
4. csc.rfs
5. boot.img
6. recovery.img
7. system.rfs
Do I need to use Odin? How? Or another application?
Click to expand...
Click to collapse
Hey dude search a thread in development section where thr is a detailed info regarding downgrade...d op has included files required for flashing (he has added d files to d package from samfirmware)
Hope this helps...
Tapatalked u see
I cant believe nobody tried helping this dude out!!!
droidtwoseven said:
Hello. I just downloaded 2.2.1 Froyo (S5830DXKC1) firmware from Samfirmware site. I'm confuse on how to use this file. Can you help me. Thanks. Below is the files.
1. S5830DXKC1_OLBKC1_DXKC1.rar (I extracted this one and got another RAR file(#2))
2. S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar (Extracted this one also and got files below(#3-#7))
3. amss
4. csc.rfs
5. boot.img
6. recovery.img
7. system.rfs
Do I need to use Odin? How? Or another application?
Click to expand...
Click to collapse
HEY am sorry nobody gave a decent reply ,, the solution is actually quiet simple ,, u extract S5830DXKC1_OLBKC1_DXKC1.rar to get S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar , then DO NOT extract further my friend, instead goto odin multi downloader 4.38 (as of apr 2012) and tick ONLY on one package,, then choose cooper_v1.0.ops as ur OPS file and S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar as ur ONE PACKAGE file and click start
PDA: S5830DXKPD
CSC: S5830OLBKPC
Phone: S5830DXKPD
Android 2.3.4
http://hotfile.com/dl/131284523/7a45b4e/GT-S5830_XSO_S5830DXKPD_S5830OLBKPC_S5830DXKPD.rar.html
Pass: sampro.pl
Did u try it? anything is new???
Easy Deodex&Root for OS 2.3.4 S5830DXKPD
Lovetz said:
Easy Deodex&Root for OS 2.3.4 S5830DXKPD
Click to expand...
Click to collapse
is this safe to use..?
anyone tried this one?
S5830D, what the D goes for?
Mine is S5830B, so some firmwares didnt worked for my phone.
^
this is for S5830 (general 5830)
that D is part of country code, DX => for south east asia (indonesia, singapore, etc)
i try to flash it, but failed...
always reboot ,no even see the home screen...
---------- Post added at 03:45 PM ---------- Previous post was at 03:30 PM ----------
just now i flash back DXKPB and flash again this rom now can work already~thanks
U should wipe data/factory reset after flash and it will solve bootloop
Works well for me. Speed enhanced. Only problem (not really a problem for me ), it takes about 2 seconds to enable screen again after lock.
Cheers!
is this a onepackage or full package?
the one in samfirmawre.com was one package..
do you guys had the link of the full package kpd?
Przekret said:
PDA: S5830DXKPD
CSC: S5830OLBKPC
Phone: S5830DXKPD
Android 2.3.4
http://hotfile.com/dl/131284523/7a45b4e/GT-S5830_XSO_S5830DXKPD_S5830OLBKPC_S5830DXKPD.rar.html
Pass: sampro.pl
Click to expand...
Click to collapse
when installing with odin, it necessary to open "BOOT" image too?
or just start without load "BOOT" file?
kindroid said:
when installing with odin, it necessary to open "BOOT" image too?
or just start without load "BOOT" file?
Click to expand...
Click to collapse
if it is single package that means it contains only one file ending with _HOME.tar.md5 and one dll file then while flashing load cooper.ops file and select one package option in odin... load this md5 file in one package section and then flash...
you may get bootloop.. to solve that go to recovery mode and wipe data + cache
madman_amit said:
if it is single package that means it contains only one file ending with _HOME.tar.md5 and one dll file then while flashing load cooper.ops file and select one package option in odin... load this md5 file in one package section and then flash...
you may get bootloop.. to solve that go to recovery mode and wipe data + cache
Click to expand...
Click to collapse
and then, on one package md5, how to load the dll file?
you don't need to load dll file....
which files are there in downloaded rar file??
madman_amit said:
you don't need to load dll file....
which files are there in downloaded rar file??
Click to expand...
Click to collapse
it contains:
- S5830DXKPD_S5830OLBKPC_S5830DXKPD_HOME.tar.md5
- SS_DL.dll
hmm...
just wondering whats the use of that .dll thing?
Wait 2.3.6 for asia
nickyikra said:
Wait 2.3.6 for asia
Click to expand...
Click to collapse
hei pal!
do you know the diference of DXKPB and DXKPD?
i'm running on DXKPB right now
kindroid said:
it contains:
- S5830DXKPD_S5830OLBKPC_S5830DXKPD_HOME.tar.md5
- SS_DL.dll
hmm...
just wondering whats the use of that .dll thing?
Click to expand...
Click to collapse
then it is one package file as i stated.. if you want to flash it just follow what i stated..
don't know what is about dll file but as it state downloader engine let it be
asia roms are way more stable than others [as they are last to be released ]
madman_amit said:
then it is one package file as i stated.. if you want to flash it just follow what i stated..
don't know what is about dll file but as it state downloader engine let it be
asia roms are way more stable than others [as they are last to be released ]
Click to expand...
Click to collapse
last question and same question like above (and one more ):
1. do you know the diference of DXKPB and DXKPD?
i'm running on DXKPB right now
2. do we lost samsung warrantee if we flashing using odin?
kindroid said:
last question and same question like above (and one more ):
1. do you know the diference of DXKPB and DXKPD?
i'm running on DXKPB right now
2. do we lost samsung warrantee if we flashing using odin?
Click to expand...
Click to collapse
1. don't know difference between them..but there wont be much of difference.only some bugfixes if it is newer
2. as far as this goes.. haven't approached service center yet.. but before claiming warranty i would suggest to flash rom for your region atleast as they can see the official version too changed... might not matter if they dont see it
i can get to download mod only with the JIG,
i cant get to RECOVERY.
in download mode i can install kernel, but i have no access to recovery.
when-ever i get to nand r\w it fails.
what can i do ?
can someone help me save my phone ?
http://forum.xda-developers.com/showthread.php?t=1457458
i saw that
boki9999 said:
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
OK i KNOW
but it didn't help me
the files that are there are corrupt.
and the instructions they don't match, i don't know what to do there.
anyone knows how or where
anyone knows how or where can i download new recovery+kernel+pit file ?
or at least point me to the right files for me ?
coz in the mentioned thread the pit file is in the GB section and the recovery pack that i think i need'
are in the ics section and the kernel for the ICS is corrupt so i cant use it.
or is it ok to use syiah kernel instead ?
my problem is when i try to install new ROM it stops when trying to write the nand part.
Yiu going to have to download the whole rom and flash with odin
Sent from my GT-N7100 using xda premium
more details please
[email protected] said:
Yiu going to have to download the whole rom and flash with odin
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
thank you!!
how do i do that ?
what ROM should i download ?
can you please give me more details ?
i can flash with Odin but WHAT i need to flash i don't know ..
Put any firmware stock or custom to pda, dont touch anything else. Firmware must by .tar or .md5.
Here you can find roms http://forum.xda-developers.com/showthread.php?t=1529173 or stock on sammobile.com.
All answers to your questions are here http://forum.xda-developers.com/showthread.php?t=1826497
you dont understand
grisoxxl said:
Put any firmware stock or custom to pda, dont touch anything else. Firmware must by .tar or .md5.
Here you can find roms http://forum.xda-developers.com/showthread.php?t=1529173 or stock on sammobile.com.
All answers to your questions are here http://forum.xda-developers.com/showthread.php?t=1826497
Click to expand...
Click to collapse
thank you for your help but.
i tried this, cant flash a rom trough odin dont know why -something about the nand
If you are stuck at nand write whatever you have tried, i think its corrupted and its time to change your motherboard... This happened to another guy earlier on...
Sent from my potato running a potato.
Have your problem been fixed ?
Sent from my GT-I9100 using xda app-developers app
If you get a nand flashing error, then just use correct pit plus repartition marked... in most cases it is enough to just flash pit area, plus of cause a stock rom
Sendt fra min GT-I9300 med Tapatalk2
hi can anyone help i tried flashing my girlfreinds ace over the weekend an gone very wrong somewhere installed update zip then cwm got the file i think i needed ie checfus cygwin stock from sammobile connected odin flash phone bricked .......retraced my tracks tried manually flashing rom with odin fatory reset all with no joy tried to extract the files pda S5830IXXLD3 pda S5830IBTULC1 phone S5830IXXLD2 with cygwin with no joy put the required dll file cygwin needed and now splitfus wont work all i think i need is the above file but have trawled the net and cant find them anywhere any help please..................
When flash stock firmware you must have 4 files PDA,CSC,MODEM,PIT. If firmware is one package then you can split it via splitfus. I recommend 4 files stock firmware. It is easy to flash.Search in Development and General Section, you will get your country's stock firmware.
Hit thanks if I help
Sent from cooperve.
Raxit k. Tandel said:
When flash stock firmware you must have 4 files PDA,CSC,MODEM,PIT. If firmware is one package then you can split it via splitfus. I recommend 4 files stock firmware. It is easy to flash.Search in Development and General Section, you will get your country's stock firmware.
Hit thanks if I help
Sent from cooperve.
Click to expand...
Click to collapse
cant get splitfus to run mt thats the trouble..............?
Then download 3 files PDA,CSC,MODEM. but download only your country's firmware. It mention in files.
Hit thanks if I help
Sent from cooperve.
rrinedrcruel
Raxit k. Tandel said:
Then download 3 files PDA,CSC,MODEM. but download only your country's firmware. It mention in files.
Hit thanks if I help
Sent from cooperve.
Click to expand...
Click to collapse
i have searched for the files but can only find the complete pda file which i cant split ............any ideas plz