PDA: S5830DXKPD
CSC: S5830OLBKPC
Phone: S5830DXKPD
Android 2.3.4
http://hotfile.com/dl/131284523/7a45b4e/GT-S5830_XSO_S5830DXKPD_S5830OLBKPC_S5830DXKPD.rar.html
Pass: sampro.pl
Did u try it? anything is new???
Easy Deodex&Root for OS 2.3.4 S5830DXKPD
Lovetz said:
Easy Deodex&Root for OS 2.3.4 S5830DXKPD
Click to expand...
Click to collapse
is this safe to use..?
anyone tried this one?
S5830D, what the D goes for?
Mine is S5830B, so some firmwares didnt worked for my phone.
^
this is for S5830 (general 5830)
that D is part of country code, DX => for south east asia (indonesia, singapore, etc)
i try to flash it, but failed...
always reboot ,no even see the home screen...
---------- Post added at 03:45 PM ---------- Previous post was at 03:30 PM ----------
just now i flash back DXKPB and flash again this rom now can work already~thanks
U should wipe data/factory reset after flash and it will solve bootloop
Works well for me. Speed enhanced. Only problem (not really a problem for me ), it takes about 2 seconds to enable screen again after lock.
Cheers!
is this a onepackage or full package?
the one in samfirmawre.com was one package..
do you guys had the link of the full package kpd?
Przekret said:
PDA: S5830DXKPD
CSC: S5830OLBKPC
Phone: S5830DXKPD
Android 2.3.4
http://hotfile.com/dl/131284523/7a45b4e/GT-S5830_XSO_S5830DXKPD_S5830OLBKPC_S5830DXKPD.rar.html
Pass: sampro.pl
Click to expand...
Click to collapse
when installing with odin, it necessary to open "BOOT" image too?
or just start without load "BOOT" file?
kindroid said:
when installing with odin, it necessary to open "BOOT" image too?
or just start without load "BOOT" file?
Click to expand...
Click to collapse
if it is single package that means it contains only one file ending with _HOME.tar.md5 and one dll file then while flashing load cooper.ops file and select one package option in odin... load this md5 file in one package section and then flash...
you may get bootloop.. to solve that go to recovery mode and wipe data + cache
madman_amit said:
if it is single package that means it contains only one file ending with _HOME.tar.md5 and one dll file then while flashing load cooper.ops file and select one package option in odin... load this md5 file in one package section and then flash...
you may get bootloop.. to solve that go to recovery mode and wipe data + cache
Click to expand...
Click to collapse
and then, on one package md5, how to load the dll file?
you don't need to load dll file....
which files are there in downloaded rar file??
madman_amit said:
you don't need to load dll file....
which files are there in downloaded rar file??
Click to expand...
Click to collapse
it contains:
- S5830DXKPD_S5830OLBKPC_S5830DXKPD_HOME.tar.md5
- SS_DL.dll
hmm...
just wondering whats the use of that .dll thing?
Wait 2.3.6 for asia
nickyikra said:
Wait 2.3.6 for asia
Click to expand...
Click to collapse
hei pal!
do you know the diference of DXKPB and DXKPD?
i'm running on DXKPB right now
kindroid said:
it contains:
- S5830DXKPD_S5830OLBKPC_S5830DXKPD_HOME.tar.md5
- SS_DL.dll
hmm...
just wondering whats the use of that .dll thing?
Click to expand...
Click to collapse
then it is one package file as i stated.. if you want to flash it just follow what i stated..
don't know what is about dll file but as it state downloader engine let it be
asia roms are way more stable than others [as they are last to be released ]
madman_amit said:
then it is one package file as i stated.. if you want to flash it just follow what i stated..
don't know what is about dll file but as it state downloader engine let it be
asia roms are way more stable than others [as they are last to be released ]
Click to expand...
Click to collapse
last question and same question like above (and one more ):
1. do you know the diference of DXKPB and DXKPD?
i'm running on DXKPB right now
2. do we lost samsung warrantee if we flashing using odin?
kindroid said:
last question and same question like above (and one more ):
1. do you know the diference of DXKPB and DXKPD?
i'm running on DXKPB right now
2. do we lost samsung warrantee if we flashing using odin?
Click to expand...
Click to collapse
1. don't know difference between them..but there wont be much of difference.only some bugfixes if it is newer
2. as far as this goes.. haven't approached service center yet.. but before claiming warranty i would suggest to flash rom for your region atleast as they can see the official version too changed... might not matter if they dont see it
Related
Hello. I just downloaded 2.2.1 Froyo (S5830DXKC1) firmware from Samfirmware site. I'm confuse on how to use this file. Can you help me. Thanks. Below is the files.
1. S5830DXKC1_OLBKC1_DXKC1.rar (I extracted this one and got another RAR file(#2))
2. S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar (Extracted this one also and got files below(#3-#7))
3. amss
4. csc.rfs
5. boot.img
6. recovery.img
7. system.rfs
Do I need to use Odin? How? Or another application?
droidtwoseven said:
Hello. I just downloaded 2.2.1 Froyo (S5830DXKC1) firmware from Samfirmware site. I'm confuse on how to use this file. Can you help me. Thanks. Below is the files.
1. S5830DXKC1_OLBKC1_DXKC1.rar (I extracted this one and got another RAR file(#2))
2. S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar (Extracted this one also and got files below(#3-#7))
3. amss
4. csc.rfs
5. boot.img
6. recovery.img
7. system.rfs
Do I need to use Odin? How? Or another application?
Click to expand...
Click to collapse
Are you planning to downgrade ? If so don't use this file
Sent from my Ultma Weapon using XDA App
EmoBoiix3 said:
Are you planning to downgrade ? If so don't use this file
Sent from my Ultma Weapon using XDA App
Click to expand...
Click to collapse
Yes, if I didn't successfully flash 2.3.3
droidtwoseven said:
Yes, if I didn't successfully flash 2.3.3
Click to expand...
Click to collapse
That's a one package file. But, IF u planning on downgrade, u need to find a full-package file first. Than flash the one-package DXKC1.
izzoe said:
That's a one package file. But, IF u planning on downgrade, u need to find a full-package file first. Than flash the one-package DXKC1.
Click to expand...
Click to collapse
Where can I download the full-package? Thanks.
droidtwoseven said:
Where can I download the full-package? Thanks.
Click to expand...
Click to collapse
Samfirmware.com
izzoe said:
Samfirmware.com
Click to expand...
Click to collapse
As already downloaded firmwares from samfirmware site, they only provide one package.
Cheers!
droidtwoseven said:
As already downloaded firmwares from samfirmware site, they only provide one package.
Cheers!
Click to expand...
Click to collapse
The first one from samfirmware is a full package. S5830XXJLC
droidtwoseven said:
Hello. I just downloaded 2.2.1 Froyo (S5830DXKC1) firmware from Samfirmware site. I'm confuse on how to use this file. Can you help me. Thanks. Below is the files.
1. S5830DXKC1_OLBKC1_DXKC1.rar (I extracted this one and got another RAR file(#2))
2. S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar (Extracted this one also and got files below(#3-#7))
3. amss
4. csc.rfs
5. boot.img
6. recovery.img
7. system.rfs
Do I need to use Odin? How? Or another application?
Click to expand...
Click to collapse
Hey dude search a thread in development section where thr is a detailed info regarding downgrade...d op has included files required for flashing (he has added d files to d package from samfirmware)
Hope this helps...
Tapatalked u see
I cant believe nobody tried helping this dude out!!!
droidtwoseven said:
Hello. I just downloaded 2.2.1 Froyo (S5830DXKC1) firmware from Samfirmware site. I'm confuse on how to use this file. Can you help me. Thanks. Below is the files.
1. S5830DXKC1_OLBKC1_DXKC1.rar (I extracted this one and got another RAR file(#2))
2. S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar (Extracted this one also and got files below(#3-#7))
3. amss
4. csc.rfs
5. boot.img
6. recovery.img
7. system.rfs
Do I need to use Odin? How? Or another application?
Click to expand...
Click to collapse
HEY am sorry nobody gave a decent reply ,, the solution is actually quiet simple ,, u extract S5830DXKC1_OLBKC1_DXKC1.rar to get S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar , then DO NOT extract further my friend, instead goto odin multi downloader 4.38 (as of apr 2012) and tick ONLY on one package,, then choose cooper_v1.0.ops as ur OPS file and S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar as ur ONE PACKAGE file and click start
hi! I need help! i'm flashing a friend's ace but when I clicked start odin says <1> --- cannot open usb serial port. code : 32
what can I do? it has been like that fot 6 minutes and I don't want to unplug the phone cause it's in download mode! help please!
Which firmware you fhlshing? And if you unplug then it not brick it can start in downloading mode. So unplug and reboot in downloading and flash again. Check cooper.ops selected in ops
I was flashing 2.3.4 vivo but never experienced this problem! I flashed mine with no problem and fla.sh rom too... OK thank you I will try it!!
Sent from my GT-S5830 using XDA App
plotinus said:
hi! I need help! i'm flashing a friend's ace but when I clicked start odin says <1> --- cannot open usb serial port. code : 32
what can I do? it has been like that fot 6 minutes and I don't want to unplug the phone cause it's in download mode! help please!
Click to expand...
Click to collapse
Hey!
Look that KIES NOT RUNNING in the backroun, if need close it from TASK MANAGER or uninstall it and install USB driver for SAMSUNG MOBILE(google for that). Try to change the USB port. If not helping try to REINSTALL USB drivers in PC, restart PC, try again.
CHEERS!
Sorry for being noob, but where do i find full package of S5830XWKPKN, i have now 2.2.1 and i cant successfully flash 2.3.3 cuz its not full package in samfirmware.com. so anyone have full package from S5830XWKPKN so i could flash it in my ace? pls help im so lost with that stuff
soniq_ said:
Sorry for being noob, but where do i find full package of S5830XWKPKN, i have now 2.2.1 and i cant successfully flash 2.3.3 cuz its not full package in samfirmware.com. so anyone have full package from S5830XWKPKN so i could flash it in my ace? pls help im so lost with that stuff
Click to expand...
Click to collapse
Hey!
You find it in samfirmware(must been registered to see download links). Download it from there! There are several same firmwares. Download other if its not MULTI FILE PACKAGE(what you downloaded).
CHEERS!
There is not any 2.3.3 multipackage, there are only 2.2.1 and i have downloaded S5830XWKPKN and tried install it with odin. Install seems to be fine but my phone gives error and there is no fix than flash old 2.2.1 back. So how i can flash 2.3.3 on right way on my ace?
soniq_ said:
There is not any 2.3.3 multipackage, there are only 2.2.1 and i have downloaded S5830XWKPKN and tried install it with odin. Install seems to be fine but my phone gives error and there is no fix than flash old 2.2.1 back. So how i can flash 2.3.3 on right way on my ace?
Click to expand...
Click to collapse
Hey!
What you downloaded? Dose you downloaded European or .... version?
Please give EXACT link what you downloaded!!!
CHEERS!
h.t.t.p://hotfile.com/dl/124821364/f954487/S5830XWKPN_S5830XWKP6_S5830OXXKP7.rar.html[/url]
This is file i want to install, could tell me how to install it right
soniq_ said:
h.t.t.p://hotfile.com/dl/124821364/f954487/S5830XWKPN_S5830XWKP6_S5830OXXKP7.rar.html[/url]
This is file i want to install, could tell me how to install it right
Click to expand...
Click to collapse
Hey!
From where you trying to download, EUROPE or ....? From where?
CHEERS!
I'm from Finland, so that should be right file for me?
soniq_ said:
I'm from Finland, so that should be right file for me?
Click to expand...
Click to collapse
Hey!
Download THIS one. This is OFFICIAL KIES RELEASE 2.3.3
CHEERS!
Does this work with custom roms? almost all of them requires 2.3.3 KPN
soniq_ said:
Does this work with custom roms? almost all of them requires 2.3.3 KPN
Click to expand...
Click to collapse
Hey!
Of course. All of them, from SAMFIRMWARE, working with custom ROM, what need 2.3.3
CHEERS!
Okay, thanks i will try this one!
soniq_ said:
Okay, thanks i will try this one!
Click to expand...
Click to collapse
Hey!
Better flash the MULTI FILE PACKAGE, not ONE FILE PACKAGE.
Dont mess them up.
CHEERS!
How do i flash in multifile package?
soniq_ said:
How do i flash in multifile package?
Click to expand...
Click to collapse
Use ODIN , but this time don't tick One Package
Sent from my Ultima Weapon using XDA App
Well there is only one big .tar package and inside is:
"amss", "arm11boo"t, "boot.img", "csc.rfs", "mibib", "oemsbl", "qcsbl", "recovery.img" and "system.rfs" files so how to flash correctly?
soniq_ said:
Well there is only one big .tar package and inside is:
"amss", "arm11boo"t, "boot.img", "csc.rfs", "mibib", "oemsbl", "qcsbl", "recovery.img" and "system.rfs" files so how to flash correctly?
Click to expand...
Click to collapse
Hey!
Its ONE PACKAGE, download another 2.3.3
CHEERS!
Hi guys.
Here's a little update what i've done with my phone.
Last night i have flashed ICS KP8 through ODIN.
I have reverted to GB this morning 2.3.5 and now i want to flash my stock firmware 2.3.4 I9100XWKI4 (TWO).
I have downloaded the desired ROM (I9100XWKI4_I9100XXKI1_I9100OXFKE1_HOME.tar.md5) from SAMMMOBILE but when i extracted it it only contains 1 file of size 539MB.
So...this is my question...where am i supposed to put that file in ODIN and do i need something else or just this file?
Tnx in advance
Follow instructions from the firmware provider makes sense .
No idea whats in the file from another forum .
Usual is to flash tar via PDA .
jje
Charlie Wax said:
Hi guys.
Here's a little update what i've done with my phone.
Last night i have flashed ICS KP8 through ODIN.
I have reverted to GB this morning 2.3.5 and now i want to flash my stock firmware 2.3.4 I9100XWKI4 (TWO).
I have downloaded the desired ROM (I9100XWKI4_I9100XXKI1_I9100OXFKE1_HOME.tar.md5) from SAMMMOBILE but when i extracted it it only contains 1 file of size 539MB.
So...this is my question...where am i supposed to put that file in ODIN and do i need something else or just this file?
Tnx in advance
Click to expand...
Click to collapse
Maybe it's a one part .tar file? (Just to put in PDA)
Pls write the name of file here.
But to get sure, download the firmware, u want, from here:
http://forum.xda-developers.com/showthread.php?t=1075278
Flash like instruction says and all should be fine
PS: If u want to be sure what's on with downloaded file, pls complete name...
CHEERS
Tar.md5 "one big file" roms just go in the PDA slot and Odin will work it out.
The md5 bit just means that Odin will do a checksum to make sure the file isn't corrupt, so no need to extract it.
Also make sure you flash the GB bootloaders first, available in the thread linked above
Sent from my GT-I9100 using Tapatalk
Hannibal226 said:
Maybe it's a one part .tar file? (Just to put in PDA)
Pls write the name of file here.
But to get sure, download the firmware, u want, from here:
http://forum.xda-developers.com/showthread.php?t=1075278
Flash like instruction says and all should be fine
PS: If u want to be sure what's on with downloaded file, pls complete name...
CHEERS
Click to expand...
Click to collapse
The name of a zip. file is I9100XWKI4_I9100OXFKE1_TWO.zip. Exctracted file name is writen in OP.
P.S. do i need to tick repartition?
veyka said:
Tar.md5 "one big file" roms just go in the PDA slot and Odin will work it out.
The md5 bit just means that Odin will do a checksum to make sure the file isn't corrupt, so no need to extract it.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Hold on a sec...you want to say that i don't have to extract it all...
Damn...is it possible that Windows recognized it as zip. file
Charlie Wax said:
The name of a zip. file is I9100XWKI4_I9100OXFKE1_TWO.zip. Exctracted file name is writen in OP.
P.S. do i need to tick repartition?
Click to expand...
Click to collapse
You will not need to put a pit in or repartition
Sent from my GT-I9100 using Tapatalk
Charlie Wax said:
Hold on a sec...you want to say that i don't have to extract it all...
Damn...is it possible that Windows recognized it as zip. file
Click to expand...
Click to collapse
I don't know, I would just download a rom from intatechs thread and follow his guide.
Sent from my GT-I9100 using Tapatalk
veyka said:
I don't know, I would just download a rom from intatechs thread and follow his guide.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Can't find it on inratech's pages...
Well...WTH...i'll try it...wish me luck LOL
my phone recently deleted everything on it, such as kernal and so on. looking around i managed to get my phone to work again, but the stock software i am using is Korean, does any one know how to download a UK stock version of everything, that preferably is unlocked, or vodaphone, as i have been looking for ages, and cant find any, thanks
XXKL1 2.3.6 Open Europe
passsword:samfirmware.com
http://hotfile.com/dl/146321681/7a0247f/I9100XXKL1_I9100OXAKL1_OXA.zip.html
BUKJ3 2.3.5 U.K Vodafone
No password or samfirmware.com maybe samsung-firmwares.com
http://hotfile.com/dl/145833620/ac6907a/I9100BUKJ3_I9100VODKI2_VOD.zip.html
cooza;
BUKJ3 2.3.5 U.K Vodafone[/QUOTE said:
How do you install this one, do you use odin , and if so which part ?
Click to expand...
Click to collapse
Josshhiieeee said:
How do you install this one, do you use odin , and if so which part ?
Click to expand...
Click to collapse
follow instruction in this thread for flashing using odin and you should also find official uk firmware in one of the other posts in this thread.
http://forum.xda-developers.com/showthread.php?t=1075278
Josshhiieeee said:
How do you install this one, do you use odin , and if so which part ?
Click to expand...
Click to collapse
Sorry mate,bit busy.
Unzip file.No password needed.You will see a file that ends in tar.md5.Put this file in PDA in Odin and select START without selecting anything else.When flash is finished do a factory reset.
Done.
Hi guys,
My friend's got a problem. He installed resurrection remix v 1.9.1 by westcrip 4.0.4 on his s2.
The kernel is:
3.0.31-siyah-v.3.2.4+
[email protected] #32
SMP PREEMPT Thu May 17 17:46:03
EEST 2012
He didn't do a backup before installing it and now he wants the original rom back. Could anyone here tell me exactly what he has to do?
He doesn't know anything about flashing roms etc and he did it as in the tutorial to get resurrection remix, so we need an easy tutorial (I don't own a s2 so I can't help him much).
His S2 has no branding.
Thx and please help!
Michi
Michi_optimus_me said:
He didn't do a backup before installing it and now he wants the original rom back.
Click to expand...
Click to collapse
Only your friend can know what firmware was on his phone before flashing the custom ROM. I suggest to use CheckFus to get the latest official firmware for the phone and then flash it using ODIN.
Michi_optimus_me said:
He doesn't know anything about flashing roms etc and he did it as in the tutorial to get resurrection remix, so we need an easy tutorial (I don't own a s2 so I can't help him much).
Click to expand...
Click to collapse
Using CheckFus is self-explanatory and for using ODIN there are already many excellent and easy to read guides here.
So CheckFus will tell which firmware is right for his device? It will tell exactly which firmware?
And could you post a link to a thread, where is explained how to flash the firmware using odin. Cause I don't understand anything about basebandkernel, and we don't know which firmware was there as he bought the device and which kernel and which baseband and whatever. Is there any tutorial for noobs?
Could you excatly post which firmware we need from here to get phone back on stock ics? We want a german firmware if possible. (I know you could just say ask google, but at xda heres a great community and I don't understand anything of odin and want to know which files exactly I have to download for phone, pda and cdc. That would be so great!)
Please help us!
Thx in advance!
Michi
EDIT:: I found this here: http://androidfirmwares.net/PhoneFirmware/Download/120
Can I download there and then I have to put them like this:
PDA: XWLPF
PHONE (Modem): XXLPX
CSC: OXILP6
?
And then get s2 to download mode?
And what about the kernel? There is this kernel on s2 right now:
3.0.31-siyah-v.3.2.4+
[email protected] #32
SMP PREEMPT Thu May 17 17:46:03
EEST 2012
How can I flash stock kernel? Or is it included in these PDA,PHONE,CSC Files?
Michi_optimus_me said:
So CheckFus will tell which firmware is right for his device? It will tell exactly which firmware?
Click to expand...
Click to collapse
Yes
Michi_optimus_me said:
And could you post a link to a thread, where is explained how to flash the firmware using odin. Cause I don't understand anything about basebandkernel, and we don't know which firmware was there as he bought the device and which kernel and which baseband and whatever. Is there any tutorial for noobs?
Click to expand...
Click to collapse
You will have to do quite a lot of reading. Start by reading the Stickies and then read this thread which explains how to use ODIN.
Remember: only fools rush in - take your time and read before flashing
Thanks a lot, but what about kernel now? We'll have to read the thread, but I just want to know if the firmware from android firmware was right and if I could flash the rom if I just put these 3 Phon,Pda and Csc in the fields and without repartition. So what about the kernel?
Sorry if I nerve you, but I'm a noob with s2/flashing etc and it's not my phone
Thx!
Michi_optimus_me said:
So what about the kernel?
Click to expand...
Click to collapse
The kernel is part of the stock firmware.
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Michi_optimus_me said:
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
You can try www.sammobile.com for stock firmware too. You'll have to sign up, but it's worth it. You just search for the stock firmware for your device and flash through Odin. Do not use the repartition button or the pit file and you should be fine.
Sent from my GT-I9100 using xda premium
Michi_optimus_me said:
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
I doubt that, the 7z file contains one tar.md5 file. Do not untar it, no one said you should do so. For ODIN read and follow the instructions according to the link I posted in post #4. That thread tells you what to do with the firmware file.
Michi_optimus_me said:
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
extract the file u downloaded from samfirmware or checkfus
u will have two files in it (in Latest gb or ics)
insert it in pda and flash
and ur done
the kernel is included in the firmware ..
Thx guys now I hope this is my last question on this topic:
I read the guide and downloaded a firmware. Now I don't understand the thing with checkfus. Do I really need checkfus or can I just download this firmware for a s2, unbranded, bought on amazon and it's a german s2?
Can I only put this extracted .tar.md5 file in PDA Section in Odin, boot s2 into download mode and connect to pc. Then click start and everything should went fine?
I own a xperia mini pro and there I must flash kernel and then firmware, so at odin and s2 the kernel will be changed when I flash pda and is included in pda?
Sorry, I asked same before, but I don't really understood
Thx for your great answeres, xda is a super community!
Michi_optimus_me said:
Thx guys now I hope this is my last question on this topic:
I read the guide and downloaded a firmware. Now I don't understand the thing with checkfus. Do I really need checkfus or can I just download this firmware for a s2, unbranded, bought on amazon and it's a german s2?
Click to expand...
Click to collapse
CheckFus is used to download the latest firmware. As you have downloaded the firmware from somewhere else, you do not need CheckFus anymore.
Michi_optimus_me said:
Can I only put this extracted .tar.md5 file in PDA Section in Odin, boot s2 into download mode and connect to pc. Then click start and everything should went fine?
Click to expand...
Click to collapse
Yes, exactly, load the tar.md5 file.
Michi_optimus_me said:
I own a xperia mini pro and there I must flash kernel and then firmware, so at odin and s2 the kernel will be changed when I flash pda and is included in pda?
Click to expand...
Click to collapse
Yes, correct, as stated earlier.
Michi_optimus_me said:
Sorry, I asked same before, but I don't really understood
Click to expand...
Click to collapse
No problem, better ask if unsure.I can see, you did some reading
Flash stock rom after resurrection remix
I just reflashed my samsung J-500H with the stock rom after gapps started crashing on resurrection remix. I had no problems going back to stock except the I had a boot loop for a few times my remedy was to do a data and factory reset on stock recovery. I will reflash RR after I find gapps that would work on my J5 Lollipop. Any suggestions?