ok guys heres what I have done:
1) ive rooted my phone using Superoneclick
That worked fine....
2) Next I have installed Root Explorer
3) I have installed Xrecovery - xrec given super user to my folders( i tried the other one you guys suggest but it kept asking me for which phone i had and mine wasnt listed (x10 mini pro)
4) Next I downloaded and put the ROms onto my sdcard
I put on Srom-2.2.1 Froyo-v8.zip, slade87_MiniCm7_v15.0.zip (and the CM6 one), robynten.zip and Andread 2.2.1 pro v4.zip
5) Ive gone into XREC after Sony Logo and installed one of the ROMS
6) rebooted phone, either stuck on splash screen or in a loop
7) gone back into XREC and tried a different ROM
8) same problem!
tried all the ROMS, none of them will boot up my phone...
According to Superoneclick im rooted ok, even tried reformatting card and doing again...
None of these work...
Any ideas where I am going wrong here?
would appreciate any help
pulling my hair out
seriously guys whats going wrong?
ive reinstalled the rom from sony update service and started again completely from scratch...
I have done this -
Root : Automate Installation
1. Download attached file "SuperOneClick".
2. Enable "USB Debug".
3. Connect phone to "PC" and select "Charge Phone".
4. Open "SuperOneClick" and select "Root".
5. Wait!
6. When it is done, reboot.
xRecovery : Manual Installation
- Phone must be rooted
- Download and install Titanium Backup. Run it and press Problems to install busybox or you can install standalone busybox in market !
- Download attached file and unpack the recovery package in to sdcard
- Use Root Explorer to remount /system rw
- Copy the content of the package (3 files) into /system/bin folder
- Chmod 777 for 3 files copied !
How to use xRecovery :
- Reboot your phone !
- Press BACK button few times right after white SE logo appears.
- Use VOLUME-UP and VOLUME-DOWN to browse, HOME to select, BACK to go back.
Ive done exactly as above and gone into XREC and installed the CM6 V5-XRECOVERY ROM and the phone is stuck on the splash screen
im pulling my hair out now as ive followed that guide exactly with a ROM which everyone says is stable
I have an X10 mini pro phone, all rooted, correct permissions and cant get it to boot with any of these custom roms
please help guys ill buy u beer! lol
Probably baseband mismatch, for sonybread and andread u require latest firmware 2.1.1.C.0.0 AND FOR some others its 2.1.1.A.0.6
And some roms are flashed using cwm nd some by xRecovery....
Goto recovery
Do a factory reset
and then install update.zip from sd card
here install this
http://www.multiupload.com/FIUS3Q1K90
basebands
galvic said:
Probably baseband mismatch, for sonybread and andread u require latest firmware 2.1.1.C.0.0 AND FOR some others its 2.1.1.A.0.6
And some roms are flashed using cwm nd some by xRecovery....
Click to expand...
Click to collapse
Hello
This is the info from the service menu:
phone software version: 1235-3411_2.1.1.A.0.6
File system: World-1-8_2.1.1.A.0.6
The ROM you linked to is the one I tried to install, i believe there is one the says for XREC and one that says for CWM
I didnt manage to get either to work and infact after installing one ROM instead of back button taking me into XREC program, it then took me into the CWM Recovery so i guess the ROM also installs that?
I will try to install this ROM you linked again, is this for 2.1.1.A.0.6 and XREC or is it for CWM?
thank you
shady108 said:
Hello
This is the info from the service menu:
phone software version: 1235-3411_2.1.1.A.0.6
File system: World-1-8_2.1.1.A.0.6
The ROM you linked to is the one I tried to install, i believe there is one the says for XREC and one that says for CWM
I didnt manage to get either to work and infact after installing one ROM instead of back button taking me into XREC program, it then took me into the CWM Recovery so i guess the ROM also installs that?
I will try to install this ROM you linked again, is this for 2.1.1.A.0.6 and XREC or is it for CWM?
thank you
Click to expand...
Click to collapse
It's for xrecovery, yes, the rom installs CWM 3.2.0.0 instead of xrecovery, but xrec and CWM are kinda the same, so it shouldn't be a problem
Oh, and you have right kernel
I guess nilesby has answered ur question, all the best for flashing!
nilseby said:
It's for xrecovery, yes, the rom installs CWM 3.2.0.0 instead of xrecovery, but xrec and CWM are kinda the same, so it shouldn't be a problem
Oh, and you have right kernel
Click to expand...
Click to collapse
Hi
ive tried what you suggested and im stuck in a boot loop on the blue android logo screen, it keeps looping and eventually freezes
system folder set to 755 permissions
bin folder set to 755 permissions
recovery.tar, changemon and charger all set to 755 permissions
I cant see what im doing wrong, permission seem right, ROM is right as confirmed by you, my firmware is correct version, phone is rooted....
I really cant see whats going wrong guys maybe my mini pro just doesnt want to be updated
shady108 said:
Hi
ive tried what you suggested and im stuck in a boot loop on the blue android logo screen, it keeps looping and eventually freezes
system folder set to 755 permissions
bin folder set to 755 permissions
recovery.tar, changemon and charger all set to 755 permissions
I cant see what im doing wrong, permission seem right, ROM is right as confirmed by you, my firmware is correct version, phone is rooted....
I really cant see whats going wrong guys maybe my mini pro just doesnt want to be updated
Click to expand...
Click to collapse
ok so cancel that, i went back into the what is now cwm menu and set factory defaults, now its rebooted into the phone o/s
i get a picture saying touch the green android to continue...
then it goes into a tutorial, skip sends my to googlemail...
i dont seem to be able to skip the tutorial or get into my phone options or menus, the keys seem unresponisve
is this a failed install?
Do a complete reset flashing on ur phone and then try the procedure...
shady108 said:
ok so cancel that, i went back into the what is now cwm menu and set factory defaults, now its rebooted into the phone o/s
i get a picture saying touch the green android to continue...
then it goes into a tutorial, skip sends my to googlemail...
i dont seem to be able to skip the tutorial or get into my phone options or menus, the keys seem unresponisve
is this a failed install?
Click to expand...
Click to collapse
stuck on "slide keyboard back to continue"
what did i break now? lol
shady108 said:
stuck on "slide keyboard back to continue"
what did i break now? lol
Click to expand...
Click to collapse
ok guys, tried other roms, reset factory defaults etc, this is the only rom that will actually boot. During tutorial i get stuck on "slide keyboard back to continue"
sliding keyboard makes no difference and thats where im up to and stuck
any suggestions on the next move?
is this a hardware fault or user error?
shady108 said:
ok guys, tried other roms, reset factory defaults etc, this is the only rom that will actually boot. During tutorial i get stuck on "slide keyboard back to continue"
sliding keyboard makes no difference and thats where im up to and stuck
any suggestions on the next move?
is this a hardware fault or user error?
Click to expand...
Click to collapse
Confirming i got the Irdium ROM to install and work correctly
now factory reset and installed that CM5 ROM and still the same problem with "slide keyboard message"
seems odd that i can install Iridium and not the other roms?
Is it because my x10 mini pro is a u20i model? or are they all the same?
ive seen a lot mention the e10i?
completely reset ur fone using SEUS...
reset
galvic said:
completely reset ur fone using SEUS...
Click to expand...
Click to collapse
hi galvic
just doing that now, im away on holiday in a few hours so ill finish it when i get back
ive been through this process quite a lot now so i think im missing something. Ill have a reread through the guides and see if i did miss anything
My whole reason for updating is because my screen isnt rotating. It is stuck in landscape mode (some apps like pinball play in portrait though?)
I downloaded some calibration apps and it shows the phone is rotating on x y and z but the software doesnt rotate(the option is ticked in settings)
Is there a sensor for the keyboard opening and closing? maybe i have a hardware issue?
If its a hardware issue than stock 2.1 shouldnt work? Is it working correctly???
you need to have right Baseband version
Most of all rom need M76XX-TSNCJOLYM-53404015 baseband version and 2.1.1.A.0.6 frimware.
For SonyBread same basedand version and new 2.1.1.C.0.0 frimware.
i think that's why you have problem with keyboard and sensor.
half fixed
Eyama said:
you need to have right Baseband version
Most of all rom need M76XX-TSNCJOLYM-53404015 baseband version and 2.1.1.A.0.6 frimware.
For SonyBread same basedand version and new 2.1.1.C.0.0 frimware.
i think that's why you have problem with keyboard and sensor.
Click to expand...
Click to collapse
sorry for late replies ive been on holiday
retried everything and still was stuck on the "slide keyboard back to continue" message
finally got the latest Andread rom to work
my screen doesnt rotate (the reason i wanted to update in first place)
Im assuming theres a hardware fault with the keyboard not being detected as nothing happens when i slide the keyboard
thanks for all your help going to stick with this andread 2.2.9 pro v8
Related
i have done installing this generic firmware. http://forum.xda-developers.com/showthread.php?t=885956
but the pre installed xrecovery doesn't work. i pressed back key when the SONY ERICSSON logo appeared but the phone just hangs.. i have to reemove the battery in order to turn off my phone..help would be much appreciated. thanks.
del7stars said:
i pressed back key when the SONY ERICSSON logo appeared
Click to expand...
Click to collapse
You've to keep pressing it until it appears, using that rom too I know the issue is the user.
i keep on hitting it.. it hangs.. i just dont know why.
del7stars said:
i keep on hitting it.. it hangs.. i just dont know why.
Click to expand...
Click to collapse
As soon as the SE logo appears, press it repeatedly as in twice a second, and it should work.
still no luck..
XperiaX10iUser said:
As soon as the SE logo appears, press it repeatedly as in twice a second, and it should work.
Click to expand...
Click to collapse
I have the same problem but now the X10i wont go past the SE logo with the picture above it.
I removed the battery but after I reboot the X10i it still hangs.
What can I do about this problem???
mschatens said:
I have the same problem but now the X10i wont go past the SE logo with the picture above it.
I removed the battery but after I reboot the X10i it still hangs.
What can I do about this problem???
Click to expand...
Click to collapse
maybe you don't have the busybox installed...
I did root my x10 using z4root permenant rooting and busy box was ok and xrecovery worked fine automatically..
used the custom rom freedom 8b and back to the original SE rom ,, which amazed me great work,,
now I used the custom rom black freedom 7a and the xrecovery wont install either automatically nor manually !! am kinda stuck with this rom,, tried rerooting and rebooted million times..
If anyone can help would be grateful
Thanks
manually copy the 3 files (chargemon, xrecovery, etc) into the /system/bin folder and make sure that you have the version of busybox from the market installed.
to manually copy these files u will need root explorer and make sure that you are mounted in RW mode.
I just did that and it works! Woo hoo!! Runs a treat with linpack around 33, still hasn't fixed the stuttering audio but hoping se will sort that in next update... fingers crossed
Sent from my X10i using XDA App
Hey. I got this problem 2, and whatever i do, i can't make it work on my SE X8. Can anyone help me please??
This is just for the X10 my friend... That's why you are having problems with your X8...
SimonXiDk said:
Hey. I got this problem 2, and whatever i do, i can't make it work on my SE X8. Can anyone help me please??
Click to expand...
Click to collapse
jimbo77 said:
This is just for the X10 my friend... That's why you are having problems with your X8...
Click to expand...
Click to collapse
i think you can do that with flashtool (check my sig)
I know that this is in the x10 forum, but i did it with the X8 tutorial, but couldn't find any usefull threads in the X8, to this problem.
mrtim123 said:
manually copy the 3 files (chargemon, xrecovery, etc) into the /system/bin folder and make sure that you have the version of busybox from the market installed.
to manually copy these files u will need root explorer and make sure that you are mounted in RW mode.
Click to expand...
Click to collapse
where I can get the files?
Have you take a look in this thread
http://forum.xda-developers.com/showthread.php?p=10235045#post10235045
Xrecovery not working after latest stock rom
Xrecovery is definitely not working on my X10i after I stupidly re-installed the latest stock Rom... I have done all the normal steps and it now does not work... I have previously had various roms on this phone and now Xrecovery is not working im worried I'm stuck with the stock rom. Now don't ask me to press the back button and copy the files into the System folder...I've done all that I'm telling you there is something in the latest stock rom to block it in my opinion.
emc2jkd1 said:
Xrecovery is definitely not working on my X10i after I stupidly re-installed the latest stock Rom... I have done all the normal steps and it now does not work... I have previously had various roms on this phone and now Xrecovery is not working im worried I'm stuck with the stock rom. Now don't ask me to press the back button and copy the files into the System folder...I've done all that I'm telling you there is something in the latest stock rom to block it in my opinion.
Click to expand...
Click to collapse
I think you should re-install Xrecovery with flash tool
Sorry for english and it doesn't solve your problem I'm sorry
hi There
PLEASE HELP ASAP I THINK IV BROKE MY BELOVED X10
Im new to all this Mod stuff and i have no experience at ....... But I LOVE this Theme i found , its amazing!!!!!! so i rooted my phone using super oneclick, i then found RECOVERY, also got the theme [X.Gbread for 2.1 Official ROM 2.0.2.A.0.24 + Battery Circle] [new-v0.6]
Installed everything it all and was great!! everything went smooth, but some things were missing on the theme like the new swipe button, the wallpaper, the new clock etc so...... i then installed a previous version [X.Gbread for 2.1 Custom ROM AOSP], thinking that version had the bits i needed and the later version i installed first was a add-on, and now the phone will not boot up, it gets past the Sony Ericsson but wont boot past the Nexus S Bootanimation, then it restarts itself, and starts all over again, i dont know what to do as i know NOTHING about flashing phones. PLEASE HELP
Phone specs - what i had before
X10i
2.1 Update1
build no. 2.0.A.0.504
Rooted with SuperOneClick
Also busybox
Many Thanks
Leon
************* update i can get the phone to the Xrecovery screen, ive tried reinstalling both of the themes but it gets to the lock screen and when the lock comes off, a box comes up with a triangle exclamation mark on it that says 'Weeks' on it and underneath it says "year" with a button that says "%1$s %2$s" and when you press it nothing happens apart from sometimes the writing year changes to years, after a minute it reboots and does the same thing.
does anybody know how i could sort this out???
Have i 'bricked' the phone?? if so what does that mean and can i sort it?? would i be able to send it in for repair??
or how i could i flash i back to the original SE theme, with out it starting up????
hopefully somebody can save me because at the moment i have not got a phone and i love my x10 sooooo much!!!!!!
i knew i should have just left it alone!!!!!!!!
Thanks Leon
i would recommend you to do
1. a full wipe using the recovery
2. re-install the theme u wanted. (perhaps u should re-download the theme u wanted)
btw, did u install using the option "install custom zip"?
if those above does not helps,
1. re-install the firmware using SEUS or flashtools from Bin4ry
http://forum.xda-developers.com/showthread.php?t=825201&highlight=flash.
2. root it and install xRecovery and then install the themes u wanted.
You'll have to really flash. The problem here was that you mixed up to FW (.24 & .504) when you installed the first theme... it clearly says for which version it is my friend....
So reflash to any ROM you want but check first the theme you're aplying and also if you have Xrecovery do a backup before any Mod so you don't have to reflash again...
Have fun you're not the first nor the last with this I've been there done that more than once....
Jim
Sent from my X10i
xcxa23 said:
i would recommend you to do
1. a full wipe using the recovery
2. re-install the theme u wanted. (perhaps u should re-download the theme u wanted)
btw, did u install using the option "install custom zip"?
if those above does not helps,
1. re-install the firmware using SEUS or flashtools from Bin4ry
http://forum.xda-developers.com/showthread.php?t=825201&highlight=flash.
2. root it and install xRecovery and then install the themes u wanted.
Click to expand...
Click to collapse
i was thinking a full wipe but im sure i read somewhere on this thread that it needs something to work like a basis program and cant work from nothing (sorry im not techinical) - if you think it will be best to do that then i will. oh and yes i did install using the option "install custom zip"
thanks
Leon
jimbo77 said:
You'll have to really flash. The problem here was that you mixed up to FW (.24 & .504) when you installed the first theme... it clearly says for which version it is my friend....
So reflash to any ROM you want but check first the theme you're aplying and also if you have Xrecovery do a backup before any Mod so you don't have to reflash again...
Have fun you're not the first nor the last with this I've been there done that more than once....
Jim
Sent from my X10i
Click to expand...
Click to collapse
thanks jim
how do i "reflash to any ROM i want" i need step by step instructions im a complete nooob!!!!! ive never flashed my phone before, I have xrecovery but unfortunately i never made a backup from my original SE theme. i will be doing from now on tho!!
thanks leon
leon_notts said:
i was thinking a full wipe but im sure i read somewhere on this thread that it needs something to work like a basis program and cant work from nothing (sorry im not techinical) - if you think it will be best to do that then i will. oh and yes i did install using the option "install custom zip"
thanks
Leon
Click to expand...
Click to collapse
I have done a full wipe then installed [X.Gbread for 2.1 Official ROM] from sd card.
I believe for my version no. 2.0.A.0.504 it came up with the same box as before, unable to get onto my homescreen but can see it in the background.
i dont know if i will be able to reinstall the SE firmware as it looks very complicated. im in England and it looks like i would have to use the Nordic software???? im not sure please could somebody let me know of any easier way of installing SE firmware back on???
thanks you so much for this
Leon
leon_notts said:
thanks jim
how do i "reflash to any ROM i want" i need step by step instructions im a complete nooob!!!!! ive never flashed my phone before, I have xrecovery but unfortunately i never made a backup from my original SE theme. i will be doing from now on tho!!
thanks leon
Click to expand...
Click to collapse
hi Jim
you sounded like you knew what you were taking about back then. i just wondered if you could help??
this is for this theme
http://forum.xda-developers.com/showthread.php?t=876226
I have done a full wipe then installed [X.Gbread for 2.1 Official ROM] from sd card.
I believe this is correct for my firmware version no. 2.0.A.0.504. it installed but it came up with the same box as before, unable to get onto my homescreen but can see it in the background.
i dont know if i will be able to reinstall the SE firmware as it looks very complicated. im in England and it looks like i would have to use the Nordic software????
im really lost and dont know what to do,
Have i now just wiped all the information off the phone???
can i put the SE Firmware on the Sd card and install from there???
also i take it i have not 'bricked' the phone??? i dont know what i means but i know its bad???
Thanks you so much for clearing some things up for me and helping me sort this mess out
Leon
do you know how to re install using sony ericsson update service (seus) ?
this method is easy.
1.switch off the x10 and waited for 5sec.
2.open the seus and follow the steps appear. *can be found here (http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=my&lc=en)
3. while plugging in the usb cable, press the 'back' button and release it when u have been told to do so.
xcxa23 said:
do you know how to re install using sony ericsson update service?
Click to expand...
Click to collapse
no i dont, i have tried it but it keeps telling me to connect my phone and mount it and it wont boot up so i cant do that.
is there another way i can do that? maybe put the file on my SD card? please help thanks
**********UPDATE it worked!!!!!!!!!!!!! THANKYOU SO MUCH!!!!!!!!!!!!
thanks i managed to re install using sony ericsson update service,
thank you all so much for your help,
will now try again but get it right this time!!!!!
Regards
leon
can u still enter xrecovery mode? if can, try this
based on wat jim said, u try to flash the 2.1 Official ROM version from SEMPITERNAL.
xcxa23 said:
can u still enter xrecovery mode? if can, try this
based on wat jim said, u try to flash the 2.1 Official ROM version from SEMPITERNAL.
Click to expand...
Click to collapse
thanks i managed to re install using sony ericsson update service,
thank you all so much for your help,
will now try again but get it right this time!!!!!
Regards
leon
great news. remember to choose the file according. perhaps you will like this theme too.
http://forum.xda-developers.com/showthread.php?p=9670843#post9670843
I'm a little stuck here and I'm not sure how this happened. I'm using a rooted X10a. I tried installing XRecovery and BusyBox so I could change ROMs again (I've tested a few) and somewhere along the way somthing happened and now after the phone boots, it doesnt recognize the SD Card, there is no notification/status bar and an Force Close message pops up "Process system is not responding". Then after a few minutes, it reboots itself. I've finally be able to connect it to Droid Explorer. The normal "holding the back button while plugging in the data cable" is not putting the phone into flash mode. I'm at my wits end, as I have been dealing with this for 2 days. Please if anyone has any ideas, any help would be appreciated. I really miss my Android
Conflict caused by double install of busybox? Or are you entirely sure it wasn't installed anymore? What happened to me was, I totally forgot that I already had busybox installed (though, not visible) and what happened was it conflicted with the other busybox/xrecovery hence breaking xrecovery and giving me almost the same symtoms you are experiencing. Unfortunately for you, I was able to just get into flashmode.. I take you tried SEUS?
What rom are you on ?
Sounds like you have messed up your xrecovery path.
Once you install xrec you dont need to install busybox as it depends on a certain version. I sugest you read z's xrecovery thread for more answers.
Hope you get it sorted.
Sent from my X10 using XDA Premium App
wombat131 said:
Conflict caused by double install of busybox? Or are you entirely sure it wasn't installed anymore? What happened to me was, I totally forgot that I already had busybox installed (though, not visible) and what happened was it conflicted with the other busybox/xrecovery hence breaking xrecovery and giving me almost the same symtoms you are experiencing. Unfortunately for you, I was able to just get into flashmode.. I take you tried SEUS?
Click to expand...
Click to collapse
Yes, but since the SD card won't mount because I have no notification bar it won't connect properly
bazji said:
what rom are you on ?
Sounds like you have messed up your xrecovery path.
Once you install xrec you dont need to install busybox as it depends on a certain version. I sugest you read z's xrecovery thread for more answers.
Hope you get it sorted.
Sent from my x10 using xda premium app
Click to expand...
Click to collapse
cm 6.1.3 v4.5.7
CingZack said:
cm 6.1.3 v4.5.7
Click to expand...
Click to collapse
you broke the xrecovery dude cause you installed again xrec and busybox...
if you install 2.2 above dont re install xrec again..
flash again (clean flash) take off your battery for 30 sec and put your usb cable in phone and hold the back button then insert the battery..
gudluck..
Is there by chance another way to put it in to flash? Plugging in the usb cable, then holding the back button while putting in the battery will not work
CingZack said:
Is there by chance another way to put it in to flash? Plugging in the usb cable, then holding the back button while putting in the battery will not work
Click to expand...
Click to collapse
open the flashtool click flash, select firmware click ok.
then do again my instructions above.
I click "Flash" in the flash tool but when I go to select the firmware, it does not show up where I put it. Do i need a certain format of file?
You have to download the firmware and flashtool from here. To get the phone in flash mode follow X10b directions
i had the exact same problem in wolfbreak's 2.2 rom after i installed busybox again, it wouldn't flash with flashtool, etc, what i did to fix it was after it was booted, i opened flashtool and connected the usb, and after it said process system not responding i pressed wait, then clicked on flashtool install root, next to flash button, it installed and then it rebooted, then after it rebooted, i clicked on ask root perms, then the superuser thing popped up and i pressed allow, then quickly i clicked on flashtool install xrecovery, and it installed!!! Then I rebooted and xrecovery worked, so I restored a nandroid backup I had and then my phone was back to normal
I had this problem after editing chargemon in windows. Copy the chargemon from recovery.zip using adb push, then chmod 06755. Thats work for me
Sent from my X10i using XDA App
Just finished flashing and it's working perfectly. Thanks to everyone who helped out. I really appreciate it
Thread closed, please post in the correct sections.
Help plz. I had heard that it would take ages however about 1 and a half hours have passed, it is still stuck in bootlogo. What can I do?
Hi...what you do is remove the program manually through xrecovery...get into xrecovery and scroll down to partition tools...then go to mount usb...from there scroll and find the file on your computer...i forget the exact name but i think its called "data image". Delete that via usb from your computer and it should solve it.
aval1392 said:
Hi...what you do is remove the program manually through xrecovery...get into xrecovery and scroll down to partition tools...then go to mount usb...from there scroll and find the file on your computer...i forget the exact name but i think its called "data image". Delete that via usb from your computer and it should solve it.
Click to expand...
Click to collapse
tyvm, it's solved
anytime =)
The only way to install data2sd without bootloop issue is to flash it using xrecovery at the same time as new rom. NO REBOOT INBETWEEN!!! Worth doing tho as its working on mine with cm 2.2 v4.5 with 4.5.7update and boosts quadrant score from 1400 to 2400. So I installed 4.5 zip 4.5.7 zip gapps zip then data2sd zip with no reboot in-between. Works a charm
Sent from my x10i running custom CM 2.2 rom. Quadrant score 2490
Do you actually see a notable change? I feel a quadrant score is just a quadrant score and no drastic effect can be seen.
Two big improvements are no lag when running multiple apps in background and an extra 45 MB of phone memory
Sent from my x10i running custom CM 2.2 rom. Quadrant score 2490
Also stuck at bootlogo...
But since installing data2SD i am also unable to acces xRecovery
I even tried it without SD card and SIM card but with no luck.
So i'm still stuck at the SonyEricsson boot logo.
What are my alternatives to regain access?
BTW: Using CM7 2.3.3
Flash the original SE rom using flashtool..I had the same..you need to be quick to press 'ok' if flashtool asks you to connect ur phone in recovery mode.
check the topsticky in this forum.
Sent from my X10i using XDA App
Thanx, I'll read that sticky.
Do i also need to flash another baseband (currently on .52), which matches the SE firmware?
And with flashing the original firmware, does it also mean that i need to install xrecovery again?
Ultimategeppie said:
Thanx, I'll read that sticky.
Do i also need to flash another baseband (currently on .52), which matches the SE firmware?
And with flashing the original firmware, does it also mean that i need to install xrecovery again?
Click to expand...
Click to collapse
yes it does , if you done it once, im sure you can do it again
oh and about the baseband, it is included in the SE firmware, so it will get the correct baseband for the SE firmware
Ok. Won't be a problem for me.
Will do it when i get home from work.
Thanks! I hope this explantion will help other people too.
[EDIT]
It was easy to go back to original firmware. the topsticky helpdek alot.
Rooted again, busybox and xRecovery.
I'm back on 2.3.3: Yes!
Excuse me if this is explained anywhere and I'm just to dumb to find it, Forum Search didn't get me the answer:
I come from the Galaxy S and wanted to install a more featered ROM to my gilrfriends mini pro since I bought it to her and she saw me doing rom stuff on my phone, but only in the last time I read of fully working ROMS (last thing was the cam) because I didn't want her to bother (me) with stuff not working
Now I wanted to install SonyBread, but I'M stuck at installing CWM... I used the apk installer, and the flash tool, but nothing works, CWM nor xrecovery is booting when I hit the back key at SE logo. When I'm searching for the chargemon file, there seems to be the right one there (code says so) and recovery.tar is present. Phone is definetly rooted!
What am I doing wrong? Is it just I'm too into the Galaxy S and just can't see the obvious? And why can't I find a clean install guide for CWM to 2.1.1.C.0.0? Most ROMS say they are for this firmware and have to be installed through CWM, so there MUST be a way..
I hope this is not a to dumb question (but I really didn't find any help through search) and someone can help me, thanks in advance
first Xrecovery via AAIS (search XDA) then install cwm via xrecovery. It's really simple, trust me
use flashtool 0.2.9.1 beta to root and install busybox & xrecovery:
http://forum.xda-developers.com/showpost.php?p=10738287
then flash cwm:
http://forum.xda-developers.com/showthread.php?t=1105745
I've tried both, nothing works. I get xRecovery, but as soon as I flash CWM, I cant get into it...
I tried http://forum.xda-developers.com/showthread.php?t=1105745. I press the back button repeadetly, but nothing happens for CWM...
I also tried http://forum.xda-developers.com/showthread.php?t=1106146 as it looks like its specificly for mini pro, but it needs CWM to install... how am I supposed to install CWM only through CWM?? This makes no sense to me I even tried the manual copy method from this side, but it seems that CWM doesent recognize the back key pressed...
I dont know whats the problem, maybe I try to recover through SEUS and start everything over on a fresh firmware, maybe some testing messed something up.
I cant find any information, if I have to do anything else for 2.1.1.C.0.0 firmware, maybe I have to edit something for chargemon?
tku137 said:
how am I supposed to install CWM only through CWM?? This makes no sense to me
Click to expand...
Click to collapse
are you sure you successfully copied those files to the right folders, and changed their permissions correctly? i suggest you to try again slowly, step by step with extreme attention
2.1.1.Clean.0.0 now has CwM pre-installed.
Sent from my U20i using XDA Premium App
dr.norton said:
are you sure you successfully copied those files to the right folders, and changed their permissions correctly? i suggest you to try again slowly, step by step with extreme attention
Click to expand...
Click to collapse
Jep I'm very sure about the files and permissions, even double checked them with root explorer and file expert...
Anyway, I found THIS and -for whatever reason- it installed CWM correctly, and I was able to get around everything. Up and running SonyBread
Thanks for your help, and maybe the next time its necessary, I'll try this 2.1.1.Clean.0.0 firmware. Sounds like Darky's Resurrection Edition for my Galaxy S, and this ALWAYS worked
nice to hear you solved it, congrats