[Q] Unknown Network - Vibrant Q&A, Help & Troubleshooting

Hey guys i flashed a stock rom and i keep getting no service. Ever since i did this ive been getting an at&t bootanimation, and then under the system settings, i get no network listed. Obviously I have tmoblie but i am only picking up at&t radio signals too. I have tried flashing cyanogen and i dont get these problems. I attached picture to help for a better understanding. Thanks in advance for help

Did you flash an AT&T stock rom? LMAO

djquick said:
Did you flash an AT&T stock rom? LMAO
Click to expand...
Click to collapse
i think he did

I think it is but im not sure. I also get a tmobile boot screen

Yea this happened to me as well lol. I downloaded the wrong odin files. Rookie mistake... just find a T-Mobile Samsung vibrant odinable jfd rom. Should be in the vibrant Bible. It could also be one click for vibrant, I can't remember.
Sent from SGH-T959 (CM7)

treyvaporizer said:
Yea this happened to me as well lol. I downloaded the wrong odin files. Rookie mistake... just find a T-Mobile Samsung vibrant odinable jfd rom. Should be in the vibrant Bible. It could also be one click for vibrant, I can't remember.
Sent from SGH-T959 (CM7)
Click to expand...
Click to collapse
I tried this too, but i still get the same results. The only rom that doesnt do this to me seems to be cyanogen but i still get the at&t boot. Sorry Im actually a MT4G user, this is my brother's phone im trying to help him with and im not too great with it as you can see. He just doesnt like cyanogen. Any more help would be greatly appreciated. Thanks so far guys.

Can someone help me get rid of the boot logo at least?

Related

HELP Samsung Showcase!!! Please

I have installed the Superclean ROM into my phone and a Verizon Fascinate kernel. My phone will no longer boot into Android nor CWM red. Is there anything I can do to restore it back to its original state? Nandroid backup never wokred for me so I haven't been able to create a back up.
If/when i can get this cleaned up is there any ROMs or kernels for the Showcase on Cell South?
Phone:Samsung Showcase 2.2.1 (Froyo)
Carrier:Cell South
P.S. this is the closest forum I can get to my phone...
packerfans1 said:
I have installed the Superclean ROM into my phone and a Verizon Fascinate kernel. My phone will no longer boot into Android nor CWM red. Is there anything I can do to restore it back to its original state? Nandroid backup never wokred for me so I haven't been able to create a back up.
If/when i can get this cleaned up is there any ROMs or kernels for the Showcase on Cell South?
Phone:Samsung Showcase 2.2.1 (Froyo)
Carrier:Cell South
P.S. this is the closest forum I can get to my phone...
Click to expand...
Click to collapse
Have you found any standalone radio/modem tar. files that you flash via Odin for the showcase?
Sent from a depraved XDA junkie and flashaholic
The only thing I flashed with Odin was CWM red and the rest went from there I don't know much about radios and nothing about modems. Is there any way I can get my phone back to a working state?
THANK YOU SO MUCH FOR REPLYING!
packerfans1 said:
The only thing I flashed with Odin was CWM red and the rest went from there I don't know much about radios and nothing about modems. Is there any way I can get my phone back to a working state?
THANK YOU SO MUCH FOR REPLYING!
Click to expand...
Click to collapse
There is an all in one package for the fascinate that you could flash but it contains a fascinate modem. Therefore you would have to flash a showcase modem to your phone if the all in one works. You would need to find a standalone showcase modem. A modem is what allows your phone to make calls, transmit and receive data and work with the gps. This is all theoretical of course, I don't know if the all in one for the fascinate would work but what do you have to lose. Here is the link:http://forum.xda-developers.com/showthread.php?t=1017817 Like I said, this contains a fascinate modem so you need to flash a showcase modem via odin after doing this. I DON'T KNOW IF THIS WILL WORK. But, this method has fixed my phone when nothing else could. I am about to be unable to communicate anymore for a little while but I will check this thread again to see how you are.
Alright I'll try this in the coming hour. Is there a way I can PM you to see tell you if it worked or not or can you check back later? Thanks
packerfans1 said:
Alright I'll try this in the coming hour. Is there a way I can PM you to see tell you if it worked or not or can you check back later? Thanks
Click to expand...
Click to collapse
Yea, just hit me up. If I don't answer right away it is because I'm in church.
Sent from a depraved XDA junkie and flashaholic
Well its not like you have much to lose now but I doing think its likely anything here would work for you. I'm assuming your phone and carrier is similar but kernels for one line just isn't intended to be tried on anything different.
Really hope it works but I think your phone may need to have an accident and get replaced. When you get a replacement or if you get yours working again, try to stay clear of roms/kernels for other devices.
Well, I just got it replaced over the counter as a manufacturer defect... lol thanks everyone!
packerfans1 said:
Well, I just got it replaced over the counter as a manufacturer defect... lol thanks everyone!
Click to expand...
Click to collapse
Good to hear.
For the record, the Showcase is as similar to our phones as it is to the Mesmerize.

[Q] Where is boot screen saved (not boot animation)?

Hi,
after flashing some roms I have this start sequence:
Galaxy S
GT-I9000
Samsung
Vibrant
Samsung
Boot animation
How can I change/delete #1
Thanks guys!
muellberg said:
Hi,
after flashing some roms I have this start sequence:
Galaxy S
GT-I9000
Samsung
Vibrant
Samsung
Boot animation
How can I change/delete #1
Thanks guys!
Click to expand...
Click to collapse
I await the answer aswell. i want to change on, not delete it.
While you await a more educational answer...ill just inform you that is call a "splash screen", and it is 100% dictated by the kernel....so its most likely something in the zimage, redbend-ua, or moden.bim files located in the kernel flashable .zip...and thats getting into fairly complicated territory...
Sounds like you installed a i9000 bootloader.
Segnaro said:
Sounds like you installed a i9000 bootloader.
Click to expand...
Click to collapse
Sounds like your right i did that myself, when i tried to fix it i corrupted my bootloader. Last time i saw my old phone turn on......
Segnaro said:
Sounds like you installed a i9000 bootloader.
Click to expand...
Click to collapse
Sounds pretty accurate to me. I had the same issue when all the ports of the 2.2.1 ROMS were being pushed out in beginning. I wonder what ROM and kernel combination he/she is using to get that?
SimeonAS89 said:
Sounds pretty accurate to me. I had the same issue when all the ports of the 2.2.1 ROMS were being pushed out in beginning. I wonder what ROM and kernel combination he/she is using to get that?
Click to expand...
Click to collapse
currently Bionix 1.3.1 with stock ka7+vodoo again
I9000 splash screen appeared first after flashing Cyanogenmod7 before Vibrant support some months ago
muellberg said:
currently Bionix 1.3.1 with stock ka7+vodoo again
I9000 splash screen appeared first after flashing Cyanogenmod7 before Vibrant support some months ago
Click to expand...
Click to collapse
Well I know that CM7 is a gingerbread rom technically, and if it was some months ago, that might've been before our vibrants were officially supported to run gingerbread on a non i9000 kernel. So you have those bootloaders I'm your phone from what it sounds like.
Question is, how do you get back? So you Odin back to stock or what? Hopefully someone can clarify.
Sent from my Galaxy S using XDA Premium App
Try this out it helped me
http://www.youtube.com/watch?v=RjRejS3gXaU
Chwek13 said:
Try this out it helped me
http://www.youtube.com/watch?v=RjRejS3gXaU
Click to expand...
Click to collapse
I have successively used this method in the past as well.
Sent from my SGH-T959 using XDA App

[Q] sound lower after icsp root

Hello I just rooted my Samsung vibrant to ics passion and the speaker on my phone sounds lower has that happen to anyone else who has rooted to icsp and is there a fix. And on another note to get ics passion I had to use Odin to go back to stock 2.1 but I made a mistake and is used the wrong files and now my phone says at&t when it boots can you guys let me know how to fix this let me know thanks guys.
sweetmeatlewis said:
Hello I just rooted my Samsung vibrant to ics passion and the speaker on my phone sounds lower has that happen to anyone else who has rooted to icsp and is there a fix. And on another note to get ics passion I had to use Odin to go back to stock 2.1 but I made a mistake and is used the wrong files and now my phone says at&t when it boots can you guys let me know how to fix this let me know thanks guys.
Click to expand...
Click to collapse
You can find the correct files here: http://forum.xda-developers.com/showthread.php?t=1319802
You should reflash stock, then flash passion.
hey
still shows the att logo on my vibrant
sweetmeatlewis said:
still shows the att logo on my vibrant
Click to expand...
Click to collapse
You can flash a new GB bootloader: http://forum.xda-developers.com/showthread.php?t=1117990
Thanks guys I got it off I just updated to 2.2 with kies then that got it off. thanks for your help really enjoying icsp phones is way faster than it use to be and it seems like the battery last longer too well later
Sent from my SGH-T959 using XDA App
sweetmeatlewis said:
Thanks guys I got it off I just updated to 2.2 with kies then that got it off. thanks for your help really enjoying icsp phones is way faster than it use to be and it seems like the battery last longer too well later
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It's good that your phone is working again, but you need to be very careful using kies: http://forum.xda-developers.com/showthread.php?t=1517406
If you're modding / flashing custom roms, It's really best to avoid kies. If you'd had a GB bootloader when you used kies your phone might be bricked now.

[Q] Serious Radio/Signal issues

Hey guys Long time creeper first time poster.
Anyways i picked up a galaxy note yesterday that was bricked for about $175. The guy had soft bricked it recovery and download were still accessible so i simply used odin to reinstall stock rogers from Da_G's thread. The guy said he bricked it because he had a JB rom on there and wanted to go back to stock but odin froze and thats how the system bricked.
Anyways right now i have the system working and running Stock ICS from Rogers. The current issue i am facing is that there is some sort of issue with the signal. The device jumps between Virgin mobile(my provide) and emergency only. Constantly i cannot get a reliable signal on the phone. Calls constantly fail and messages rarely send.
I have tried flashing the stock radio for rogers from Da_G's thread as well but no luck. The apn is correct and ive tried turning LTE off, no success at all. Does anyone in the community have any suggestions this is a really frustrating problem!
Thanks
Joe-Pk said:
Hey guys Long time creeper first time poster.
Anyways i picked up a galaxy note yesterday that was bricked for about $175. The guy had soft bricked it recovery and download were still accessible so i simply used odin to reinstall stock rogers from Da_G's thread. The guy said he bricked it because he had a JB rom on there and wanted to go back to stock but odin froze and thats how the system bricked.
Anyways right now i have the system working and running Stock ICS from Rogers. The current issue i am facing is that there is some sort of issue with the signal. The device jumps between Virgin mobile(my provide) and emergency only. Constantly i cannot get a reliable signal on the phone. Calls constantly fail and messages rarely send.
I have tried flashing the stock radio for rogers from Da_G's thread as well but no luck. The apn is correct and ive tried turning LTE off, no success at all. Does anyone in the community have any suggestions this is a really frustrating problem!
Thanks
Click to expand...
Click to collapse
Flash another ROM on it. And keep in mind, it was sold to you as a brick. Maybe it also had the radio issue before you got it.
You did the ICS update via OTA?
Im downloading this rom now "UCLF6 Base Rom Featuring
The Unofficial FJ-Mod Build #11
"RISE UP!""
Will try it and see if it makes any difference.
Agoattamer said:
You did the ICS update via OTA?
Click to expand...
Click to collapse
I installed the stock ics through odin i never did any OTA's it says there are none available.
So i flashed a new rom and i still cannot complete calls or send text messages...sometimes it works and sometimes it, majority of the time it is not working...any other suggestions?
What model is it? That info is under the battery.
rangercaptain said:
What model is it? That info is under the battery.
Click to expand...
Click to collapse
SGH-I717R
Have you tried a different modern yet?
Sent from my SAMSUNG-SGH-I717 using xda premium
rquiett said:
Have you tried a different modern yet?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I have tired UCLF6 Modem and the AT&T Modem.
Joe-Pk said:
I have tired UCLF6 Modem and the AT&T Modem.
Click to expand...
Click to collapse
From what I see it looks like they use the T-mobile frequencies but I could be wrong. You may need to give a t-mobile modem a try
rquiett said:
From what I see it looks like they use the T-mobile frequencies but I could be wrong. You may need to give a t-mobile modem a try
Click to expand...
Click to collapse
I know that virgin uses HSPA+ frequencies but im willing to try anything can you send me a link to the T-mobile modem? And its safe to flash correct, shouldnt cause a hard brick?
Joe-Pk said:
I know that virgin uses HSPA+ frequencies but im willing to try anything can you send me a link to the T-mobile modem? And its safe to flash correct, shouldnt cause a hard brick?
Click to expand...
Click to collapse
Here is a link to the thread with the T-mobile modems I suggest reading up a bit in there before flashing. And as long as you are following the directions I don't see why it would not be safe to flash
rquiett said:
Here is a link to the thread with the T-mobile modems I suggest reading up a bit in there before flashing. And as long as you are following the directions I don't see why it would not be safe to flash
Click to expand...
Click to collapse
I went ahead and flashed this modem before you posted http://forum.xda-developers.com/showthread.php?t=1679722&highlight=t-mobile+modem
but so far it hasnt made a difference. i will try the one in the thread you posted now.
Tried the stock Tmous modem same issue... any other suggestions. The phone will say its on the network but i just cant send anything. sometimes it will work for 20 mins then it will stop working for a while again.

[Q] [HELP] How to flash t-mobile/at&t boot screen?!

I am the owner of a rooted t-mobile vibrant. Useing odin to root it flashed an at&t splash screen instead of the pink t-mobile one. I know its possible but how?. I've searched for two days trying to figure this out and all i can get is how to change the boot animation that i already know how to do! Any help would be appreciated. Thank you for your time.
187k4 said:
I am the owner of a rooted t-mobile vibrant. Useing odin to root it flashed an at&t splash screen instead of the pink t-mobile one. I know its possible but how?. I've searched for two days trying to figure this out and all i can get is how to change the boot animation that i already know how to do! Any help would be appreciated. Thank you for your time.
Click to expand...
Click to collapse
That is the kernel splash screen you're referring to. No one likes that sound or logo from my experience so your only going to find that on stock. If you want it that bad just flash back to stock 2.1 with Odin, changing a logo of a kernel is complicated to say the least. You can check this link out though http://forum.xda-developers.com/showthread.php?t=1971915
Sent from my SGH-T959 using Tapatalk
iTz KeeFy said:
That is the kernel splash screen you're referring to. No one likes that sound or logo from my experience so your only going to find that on stock. If you want it that bad just flash back to stock 2.1 with Odin, changing a logo of a kernel is complicated to say the least. You can check this link out though http://forum.xda-developers.com/showthread.php?t=1971915
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
It looks pretty easy to follow so ima try it out. Thanks a lot and ill let you know how it goes.

Categories

Resources