if qpst won't recognize your phone,open it when your connected in htc sync,click on right bottom add com port and UNCHECK system determintation,i was stuck there for 3 days until i figured this out and it found my phone on com port 31(may be diff.for others)then I was able to turn my volumes up to 3,you can go to 4 if you want but it is possible to blow your speakers if you do.
instructions here for turning up volume http://forum.xda-developers.com/showthread.php?t=1147436
didn't find this posted anywhere so I thought I would do it.
for some reason i cannot get QPST to see my phone either. i've tried what you said but there are no such options in sync.
Related
Today i plugged my phone to the usb cable and instead of getting the usual connection option screen... nothing... The phone charges but no Data transfer. Did hard reset, still nothing.. now im stuck with the old firmware... any help plz?
might be the cable that you're using. i used before a cable that is not the original and the same thing happened to me, i.e. pc cannot recognize device.
Try Settings-->Other-->USB To Pc-->UNCHECK (enable faster data sync) this should help...
cable : original came with the phone (used to work up until b4 yesterday) also tried another micro usb cable that came with me N900 but still nothing.
I did the un-check "enable faster sync" still nothing
Did soft reset, hard reset using volume keys, and factory reset from phone setting itself. still nothing.. the phone charges.. but no data transfer.. its something to do with the phone because i tried multiple PC's the phone doesn't bring up the connection type option page
Epiclipto said:
Today i plugged my phone to the usb cable and instead of getting the usual connection option screen... nothing... The phone charges but no Data transfer. Did hard reset, still nothing.. now im stuck with the old firmware... any help plz?
Click to expand...
Click to collapse
Altho u have tried with diff PCs,try reinstalling MS Activesync on one PC.
did that too
when you make/recieve a call, does the loudspeaker come on?
nope everything is normal except no data transfer when connected to usb...
Epiclipto said:
did that too
Click to expand...
Click to collapse
Now pls chek whether USB2 is enabled in your PC Bios...
The cable used to work before, and I tried it on multiple PCs, how can it be that USB2 is diasbled?
Epiclipto said:
The cable used to work before, and I tried it on multiple PCs, how can it be that USB2 is diasbled?
Click to expand...
Click to collapse
No harm in checking.Infact i faced similar issue once and the USB2 was disabled.It took me an entire week to diagnose the problem.These PCs have got a mind of their own and do mischievous things on their own without our knowledge.
But since its not working on multiple PCs,i am not sure.We'll hav 2 wait 4 a solution i guess...
hmmmm.. would a full system format and re-install be possible? and would it fix it? (talking bout on the phone)
HELP, HELP
SAME PROBLEM WITH HTC2 T0MOBILE
even on the boot loader screen, it charges but no USB stuck on serial.
even when on sleep mode and plug the cable orange led is on but it didn't wake up for choose (active syn or stoeag memory)
PLEASE HELP
i can do nothing, HSPL or rom upgrade
the cable and the USB drivers are tested more than 100 times
Most horror problems I had with the USB sync have been down to not having the latest version fo Activesync from microsoft. Uninstall the old version thwen reboot - now download the 4.5 version which I think is the newest and last version they made (unless im out of date) and then reboot the machine, then connect up the phone - but not immediately after the machine has booted wait a couple on mins, Windows takes longer than it often appears to be ready to go. One your hard drive led flashing light has settled down it is probably time to try. Then see if it finds all the devices in your phone.
If it doesnt go into the control panel and double click system, hardware tab, then select device manager and see if there are any devices with a yellow sign with a "!" in them. If there are delete them and then unplug the phone and plug it back in again. It might get past some stuck things. If it doesnt see anything new on device manager theres a menu at the top and look for "scan for hardware changes" this gives teh device manager another look at what its got connected.
If that fails open up the USB section under in device manager - its got a little plus next to it, press that plus and it open up all the names of chips you have for your USB control on the pc's motherboard. Write down the numbers and go and get the correct up to date drivers for that type of USB and install them. Then try the process again. Sometimes deleting the USB drivers and just doing a "scan for hardware changes" again, will reset the USB drivers and start things working, however it can get tricky if your using USB mouse and Keyboard to select anything if you delete the USB, because thats what the KM/mouse relies on to control teh machine, so have a PS2 mouse plugged in if you can. If that fails I would suggest reinstalling windows as its probably knackered. It amazing how things start to work wonderfully on a fresh copy of windows.
I have been where you are! And tried every suggestion that was given here. It all came down to the cord. I actually went through 3 different cords before I found one that worked and found that by accident. I bought an external drive and that cord works. For whatever reason, that is the only cord that now works for me. I only use it for data transfers. i use the other cords for charging.
i reacently got my 3rd hd2
whenever i plug it into the computer it charges but will not sync or connect via disk drive
i have tried installing the drivers but it says device unplugged even when its not
can someone please help me?
search for the threads 'stuck in car kit mode'. compare the symptoms.
Look in ActiveSync on the device too... Make sure it says "Synchronize all PC's using this connection" in the connections menu is set to USB.
Sounds like a faulty micro USB cable / HD2 female USB port. Try with a different USB cable!
i tried all of this
i think it is stuck in car kit
also when i try and make calls its automatically on speaker?
Opps sorry didn't read in detail.
Have you tried changing this registry key:
\HKLM\System\CurrentControlSet\Keypad\IsCarKitMode=0
At least for me, when set to '1', my dialler turns to landscape mode with speakerphone enabled. Not too sure how this would affect USB settings though.
Update: Check this thread out:
HD2 Stuck in Car Kit Mode
Seems like a faulty microUSB port on your HD2
its strange because im running android on it now and sync etc works fine
its just when its on windows mobile it wont work
i got rid of car mode whenever i hit home with the regedit
thanks
but it still goes to speaker phone whenever i call/someone picks up
how can i change this?
still not working the usb
cliffordlee said:
Update: Check this thread out:
HD2 Stuck in Car Kit Mode
Seems like a faulty microUSB port on your HD2
Click to expand...
Click to collapse
it being a faulty usb shouldnt make it stay in car mode
but i think it is cause it always starts on speaker and if i turn it off when someone picks up it goes back on
the reg worked for getting the navi panel from autostarting and staying
all i need is a reg to stop auto speakerphone
any ideas?
squidbutt said:
i reacently got my 3rd hd2
whenever i plug it into the computer it charges but will not sync or connect via disk drive
i have tried installing the drivers but it says device unplugged even when its not
can someone please help me?
Click to expand...
Click to collapse
Hi
I have the same problem! Did you find the answer?
Please help me in connection my device to pc. It doesnt even connect via boot loader!! but charging is ok.
Any idea plz?
alright guys i think i may be screwed here.
teh phone i got is the HD2 runing widnows mobile "5.2.21869"
now the problems i have is that most of the apps i go in to, teh screen orientation is stuck on landscape and there is nothign i can do to get it back. shaking violently dosen't work for all teh rage fixers out there.
i tryed re-calibrating the G-sensor with no luck. then for a laugh i calibrated it so that the phone though flat was at some obscure angle, then reset to flat, alro with no luck.
i have done the foctory reset located within the operting system with no change, and i have done the manufacture's reset as well (the one where you hold down teh volume buttons and tap the power button).
now i have the firmware update that will most likely fix this but there is a problem (which is where i think im screwed). whenever i plug the phone into my pc, or any other, it simply charges adn will not recognise that i have connected it to a computer. (i have dissabled charging whenever connected to a PC).
so do you have any suggestions guys or am i as screwed as i think i am.
archangelCJ said:
alright guys i think i may be screwed here.
teh phone i got is the HD2 runing widnows mobile "5.2.21869"
now the problems i have is that most of the apps i go in to, teh screen orientation is stuck on landscape and there is nothign i can do to get it back. shaking violently dosen't work for all teh rage fixers out there.
i tryed re-calibrating the G-sensor with no luck. then for a laugh i calibrated it so that the phone though flat was at some obscure angle, then reset to flat, alro with no luck.
i have done the foctory reset located within the operting system with no change, and i have done the manufacture's reset as well (the one where you hold down teh volume buttons and tap the power button).
now i have the firmware update that will most likely fix this but there is a problem (which is where i think im screwed). whenever i plug the phone into my pc, or any other, it simply charges adn will not recognise that i have connected it to a computer. (i have dissabled charging whenever connected to a PC).
so do you have any suggestions guys or am i as screwed as i think i am.
Click to expand...
Click to collapse
After you plug the phone into a usb port on the pc, does a screen pop up on the phone letting u choose from either : charge only, disk drive, or the one u need for update "sync"
If not you might have to download a new windows rom from the hd2 rom section and put it on the sd card
checkout this newbie section on how to
just verify in the settings under phone how what is your rom size
for 512 MB ROM use this http://forum.xda-developers.com/showthread.php?t=609477
for 1024MB ROM use http://forum.xda-developers.com/showthread.php?t=653614
There are instructions there on how to do this without using the usb cable, Just flash thru the SD CARD
Good Luck
My phone will charge only, the computer will not make a sound as if its connected. I have used usb view and device manager the computer just doesn't see it. I also can't see it under the command prompt (adb Devices). Rebooted it many times tried the connect pc changing that making sure its on always ask, I reset it back to default. I am using the factory usb as well as tried a few others along with using multiple computers to rule out a computer and usb problem.
Can anyone help
Make sure you are not paying so much attention to your computer and more to the phone. Depending on what ROM you are running if you connect it to the computer the phone will show a USB connected but you have to press a button to finish the connection (on the phone) it is usually a swipe down from task bar look for it, that is how it is on the ROM I am running A05PTH3ORY. Make sure to thank me if this help you.
This may not apply if the PC doesn't see it at all, but you can give it a shot.
Put your phone into Internet Pass Through mode. After 30 seconds (or more, not less), put it back into Disk Drive mode.
Sent from my ADR6400L using XDA App
I have my USB Config set to MTP and USB Debugging ON under Developer Options. However, whenever I connect a USB device, it always resets itself to Charge only and I have to switch it back to File or Photo transfer in order to connect to PC, AA, etc.
Any ideas on how to make the USB setting 'stick' with what I set in DO?
Is there an ADB command? Other setting I should be looking for? Any help is appreciated.
bilottag said:
I have my USB Config set to MTP and USB Debugging ON under Developer Options. However, whenever I connect a USB device, it always resets itself to Charge only and I have to switch it back to File or Photo transfer in order to connect to PC, AA, etc.
Any ideas on how to make the USB setting 'stick' with what I set in DO?
Is there an ADB command? Other setting I should be looking for? Any help is appreciated.
Click to expand...
Click to collapse
Strange, I *know* that mine 'used to' stay at whatever setting it was left at before. I just tried it now, and it still stays on whatever it was last set to, BUT... It automatically toggles the 'allow debugging over USB' to OFF every time I plug my phone into my computer. Now I know it didn't do this before, I wonder if it has something to do with 'always trust this connection' being set? Also, it really seems like this stuff is behaving just a wee bit different since I unlocked my bootloader. Hmm, could it be they have set a flag where USB debugging always turns off when the device is connected to something, IF the bootloader is unlocked?
bilottag said:
I have my USB Config set to MTP and USB Debugging ON under Developer Options. However, whenever I connect a USB device, it always resets itself to Charge only and I have to switch it back to File or Photo transfer in order to connect to PC, AA, etc.
Any ideas on how to make the USB setting 'stick' with what I set in DO?
Is there an ADB command? Other setting I should be looking for? Any help is appreciated.
Click to expand...
Click to collapse
I can confirm that this happens on mine too, really annoying, but I think this is not something a lot of people are facing, as there are literally NO other references to this that I can find. The reason why I think this is a very specific issue is that I recently got a Mate 20 X, which is essentially the same phone, and noticed that when I plug in the USB to a PC, I get a dialog pop up at the bottom of the screen asking if I want to transfer photos, files or to charge only. I NEVER saw this on the Mate 20 Pro, but that might be because I messed something up. I did do a lot of fiddling over ADB when the phone was new (mostly disabling apps) and giving permissions to apps like lightning launcher and System UI tuner and I'm wondering if this what has caused the issue.
Obviously even before I did this, I necessarily must have connected to the thing via USB, but strangely, I don't remember seeing this dialog... Having to go into developer mode to change this setting can't be how it's set up normally, as then basically no-one will be able to get connected via MTP (I suspect everyone on XDA knows about this setting, but suspect none of the average Joes even knows the option exists).
So the question is, what did we do wrong and how do we get this diaglog back because I have found that Developer mode is not accessible for other Users set up on the phone so I can't access the phone at all via USB now when the other user is using it...
I'm hoping we can work together to find out what we did wrong!
PS: I find like kaibosh99 that the USB debugging also toggles back to off. I am not rooted or bootloader unlocked
After a lot of faffing and looking into it some more, I don't get the pop-up dialog but have discovered that it is in the notification menu where it shows
USB icon . Charging via USB
Expanding that notification and tapping on it, gives the option to choose file transfer and a load of other stuff. It's a pity that a pop-up dialog doesn't open like on the Mate 20 X, you can see what I mean here
https://uk.community.huawei.com/mat...tried-usb-debugging-and-all-that-already-6786
Much easier than having to go into the notification menu!