I would like to know how many differences there are between this two kind of dual band.
i've bought a T-mobile from USA (i'm still waiting for it so i don't have it now) and i saw that it is a 900/1900. I'm in italy, so i would like to know if i'll use only 900 or 1900 too (i think in italy 1800 is used).
i think i'll have to unlock it, the vendor told me it is a pocket pc 2003, do XDAunlock, work on it?
(i'm sorry for the last off topic question...i post here to not make too many post around the forum)
lyka said:
I would like to know how many differences there are between this two kind of dual band.
i've bought a T-mobile from USA (i'm still waiting for it so i don't have it now) and i saw that it is a 900/1900. I'm in italy, so i would like to know if i'll use only 900 or 1900 too (i think in italy 1800 is used).
i think i'll have to unlock it, the vendor told me it is a pocket pc 2003, do XDAunlock, work on it?
(i'm sorry for the last off topic question...i post here to not make too many post around the forum)
Click to expand...
Click to collapse
I'm sorry to tell you since your network works on 1800 Mhz your new T-mobile PW10B1 wont work on this frequency it's made for 900/1900 Mhz if you unlocked it or not it's not gona work, you need the PW10A1 devices they work on 900/1800 Mhz.
but there are cellphone companies in eu who use 900 maybe there are some in your country
if not well thats too bad
oh....no..... :shock:
is there anithing i can do? radio update??? something like this!
Your special edition ROM can help me?
from what i've been able to understand about the 900/1900 then it's a hardware limit the GSM part of the xda1 will have to be physically removed which would most likely be way more expensive then getting a new device
of cause i could be wrong
The XDA1 is available in two flavours (from what I read):
USA: 900/1900 bands
EU: 900/1800 bands
Since both flavours support the 900 band, you should be able to use it in Europ on one of the 'old' networks.
In Holland both KPN and Vodafone have nationwide coverage on 900MHz.
Since TIM is and 'old' company too (Telecom Italia isnt it?) I guess theyre on 900 too. To be sure: check the websites of the Italian mobile operators. Be aware that reception in some areas might be less than if you could use both 900 and 1800 bands as more and more operators are extending their networks on 1800 only (because of lack of free 900 band frequencies). I noticed this a few years back in France where in rural areas there was no coverage with a 900 phone and full reception with a 900/1800 phone (same network).
Reading the forum i've read that is possible to chose band 900/1800 and 900/1900 by bootloader and pressing calendar...can this be true for some model?
p.s. Of course TIM uses 900...i wonder if it will ever use 1900 one day
i think UTMS or some other replacement will take over before us and eu start to use the std's of eachother
just another question, i found information about special edition rom. It says that with bandswitch.exe some devices may work with other "not natural" band. So i'll try when my XDA will be shipped.
TIM wil NEVER use 1900, at least not in Europe. The 1900 band is not available for telecoms in Europe (just like the 1800 band is not available in USA)
I've got T-Mobile from US working in Russia on 800/1800 through ROM upgrade. What it did - it removed SIM Lock and turned the device into 3-band. Works perfect.
Rgds,
Cimmerian
www.briantracy.ru
i haver never heard about anybody being able to make a dualband into a triband using just software the filters and mixers in the hardware part og the gsm are different
I have never heard about that either. As far as I know frequencies are hardware based. Otherwise we could flash our XDA's to anything we wanted.
I have researched this for weeks and weeks since I need my XDA I to work on the 850Mhz network in the US quite badly.
Please post exactly how you did it
1800/1900
I got the same problem you do but reverse , I'm in the U.S and bought the phone from Europe ( qtek 1010 ) my phone will not work in the U.S because the network here is 1900 and in europe 1800. If you want I can trade with you if you have the same phone. I got all the package in a box.
My email is [email protected]
U can reach me on this email if you wish to exchange.
Lyka
There are 3 major networks in Italy that have 900 mhz networks.
They are:
Telecom Italia Mobile (TIM)
GSM 900/1800
Vodafone Omnitel N.V.
GSM 900/1800
Wind Telecomunicazioni SpA
GSM 900/1800
If you are within any of their networks you should have service with your
current Wallaby. (XDAI). You should be able to insert your sim card and go.
Some ROMS auto select the available network, others do not. There is also a program that you can cook into a ROM that give you a software selctable band switch.
I hope this helps?
Joe
Just to clarify my last post:
It has been discussed on this forum, for a few years, that you cannot
change a 900/1900 phone to 900/1800 using software.
However since your phone does operate on 900 mhz and there are
900 mhz throughout Italy, including Sardinia, you should have no problem using your current phone. In fact I have used my USA 900/1900) XDAI in Italy.
Let us know how you make out.
Joe
900/1900 T-Mobile -- Swap for an 900/1800 XDA ?
Straight swap...I made a mistake and bought a T-Mobile from the US thinking it would work in NZ....it won't and everyone on the forums agrees....so only option is to replace with a European one...
If anyone is interested, post a reply and we can set something up.
Cheers, Hamish
BandSwitching
I live in Jamaica, we have to GSM networks, 850/1900 & 900/1800 my XDA1 works well on both networks... although signal strength from the 900/1800 is stronger it makes no big difference... I believe the shorter band is essential in buildings etc. so wait till you get the phone and give it a try.
I tried the Band Switching application in the Special Edition ROM, it made no real difference.
Slightly off topic can someone point me to an explanation of UMTS???
I have a brand new unlocked Streak with an AT&T sim card in it, from my old lg vu. All I have is just the calling plan. I want to get a no contract unlimited plan to get online, etc., since I now have this beautiful new phone. Which carriers can I use and which are the cheapest? AT&T's data plan seems too pricy. Thanx, in advance, for the help...
Your only alternative to AT&T is T-Mobile, and if your phone was bought direct from Dell, it will be a very painful alternative in terms of speed. Streaks purchased direct from Dell cannot see all of T-Mobile's frequencies, and thus data will be limited to EDGE (2G) speeds.
Bite the bullet and get an AT&T smartphone plan. Even though T-Mobile has an unlimited everything plan, the penalty you pay in speed offsets any savings you might gain from changing carriers.
Carrier, Network
I bought my Streak off of Ebay from someone in Canada. It was brand new from Rogers. I unlocked it through Dell. Does this make a difference? I have seen unlimited plans from Boost Mobile and Straight Talk and was curious if my Streak would work on their networks. I read on another site that the unlocked Streak would work on any network. Just looking for other info... Thanx.
Unlocked GSM type phones will generally work on any GSM type network.
Boost mobile is a CDMA type network and straight talk is by tracfone? Straight talk might work depending on the donor phone (or if you can get a bare sim card)
Rogers is basically the At&t of the north in the way they handle the streak, and more importantly in compability between phones.
They're both 3g 850/1900
Tmobile is 1700.
The US streak is 850/1900/2100 (which is the one offered by the dell website/rogers/at&t)
straight talk uses verizon/at&t/tmobile as it's base network(?)
You'll get call/2g off either tmo's or at&t's networks and straight talk if it uses their network for coverage.
You wont get 3g except on the at&t 3g available portions of the network.
You cant use boost mobile at all if it's only CDMA, only if they offer GSM service on top of CDMA
TheManii... Thanx for the reply and the help. At least now I have a starting point. I am really new to all this and any help and advice is really welcomed and appreciated. Keep the info coming... Thanx again.
Unlocked Tmobile phone, ST sim
Hello, noob here... This is the closest thread I've found to my problem after extensive searching, and not being "senior" enough to post on more experienced threads. My issue: I have an unlocked Tmobile branded Moto Defy. Put the sim from my Straight Talk E71 in there, and, as many have said before, I only get edge speeds. I've read other forums of people claiming to pick up the HSPDA 850 band, but would have to travel hundreds of miles from SC to actually prove that. My real question here is, why can't my truly quad band Defy pick up the same exact HSPDA 850 / 1900 bands that my Straight talk Nokia E71 was picking up? Do I have to root it? Can you explain why exactly it doesn't pick up the AT&T 1900 band? Themanii, you seem knowledgeable here. Any info is much appreciated. Thanx.
Here's the info for the two phones:
Defy: 2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100 HSDPA 1700 / 2100 or HSDPA 850 / 1900
E71: 2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100 HSDPA 850 / 1900 - American version
info derived from gsmarena.com
Firstly dont bump old threads, to granted this one isnt THAT old.
Which carrier are you on exactly?
If you're on Tmo USA your e71 doesnt support AWS(1700)
If you're using At&t with your AWS defy it doesnt support 1900
Defy = 900/1700/2100 OR 850/1900
E71 = 900/2100 OR 850/1900
Hello, I just got this phone and I'm wondering if I was automatically switched to HSPA+ speed. It says H on the status bar but I don't notice any speed improvement. AT&T can't detect the phone obviously so I can't switch the 4G data plan on the website either.
Is there a way to check or make sure I'm getting HSPA+?
Thanks.
Go to the marketplace and download Free Speed Test.
Sent from my HD7 T9292 using XDA Windows Phone 7 App
If you are in an area that uses the 850 MHz band exclusively for HSPA+ and you only have a tri-band WCDMA Lumia then you will get 3g/edge speeds.
Data goes back and forth between 3G and H as I move about the city (New York). Wonder if it's the phone or the crappy AT&T signal.
My max down speed is about 3mbps.
Just wondering where you purchased your Lumia 800 from? I am looking for one for use with Telstra in Australia that uses the 850MHz band
Simmo3D said:
Just wondering where you purchased your Lumia 800 from? I am looking for one for use with Telstra in Australia that uses the 850MHz band
Click to expand...
Click to collapse
I bought mine unlocked from Amazon.
Does it support the WCDMA 850MHz AT&T network? Did you have to flash it with something?
the Lumia 800 currently does not support 850Mhz, only 900.
Next month, the US variant (RM-819) will be released here at the Microsoft stores. I'm sure they won't be cheap, but they'll support 850Mhz. You can wait until then. There is also speculation that the EU variant (RM-801) can be flashed with the RM-819 firmware and then open up the 850 band, but that won't be confirmed until someone actually does it.
anseio said:
the Lumia 800 currently does not support 850Mhz, only 900.
Next month, the US variant (RM-819) will be released here at the Microsoft stores. I'm sure they won't be cheap, but they'll support 850Mhz. You can wait until then. There is also speculation that the EU variant (RM-801) can be flashed with the RM-819 firmware and then open up the 850 band, but that won't be confirmed until someone actually does it.
Click to expand...
Click to collapse
I don't know about that... The description of the factory unlocked German version I bought says it does.
"Nokia Lumia 800 black 16GB factory unlocked. GSM 850 / 900 / 1800 / 1900 & 3G/HSDPA 900 / 1900 / 2100."
I'm using it on AT&T US with 3G.
http://www.amazon.com/gp/product/B0067M9JBQ/ref=oh_o00_s00_i00_details
Simmo3D said:
Does it support the WCDMA 850MHz AT&T network? Did you have to flash it with something?
Click to expand...
Click to collapse
Works fine with mine. I get 3-4mbps down, which seems to be the norm in NYC. I didn't touch the firmware, still on 11451.
Itaintrite said:
I don't know about that... The description of the factory unlocked German version I bought says it does.
"Nokia Lumia 800 black 16GB factory unlocked. GSM 850 / 900 / 1800 / 1900 & 3G/HSDPA 900 / 1900 / 2100."
I'm using it on AT&T US with 3G.
http://www.amazon.com/gp/product/B0067M9JBQ/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
Sorry, I should have been more detailed.
The variant models of the Lumia 800 (RM-801 and RM-819) differ in WCDMA bands, not GSM bands. Take everything I said before and apply it to WCDMA/HSPA. It then matches up with the description from your German advert.
anseio said:
Sorry, I should have been more detailed.
The variant models of the Lumia 800 (RM-801 and RM-819) differ in WCDMA bands, not GSM bands. Take everything I said before and apply it to WCDMA/HSPA. It then matches up with the description from your German advert.
Click to expand...
Click to collapse
Ah yes, then you're right. It says right there on the box. WCDMA 900/1900/2100. So no 3G for T-Mobile US ;P
AT&T No data
Just got my unlocked 800 from Amazon, can't seem to get data to work. Any suggestions? MSG calls OK
oilpressure said:
Just got my unlocked 800 from Amazon, can't seem to get data to work. Any suggestions? MSG calls OK
Click to expand...
Click to collapse
Go into Settings/Cellular, and at the bottom click APN. Add wap.cingular to the first line and save. That's it.
Itaintrite said:
I don't know about that... The description of the factory unlocked German version I bought says it does.
"Nokia Lumia 800 black 16GB factory unlocked. GSM 850 / 900 / 1800 / 1900 & 3G/HSDPA 900 / 1900 / 2100."
I'm using it on AT&T US with 3G.
http://www.amazon.com/gp/product/B0067M9JBQ/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
It's wrong. They're only tri-band 3G.
Edit: And that's already been mentioned, stupid extra page.
It uses the 1900 band to get at&t 3G, correct?
I was thinking about picking one of these up but was worried about 3G coverage with it if it only use 1900 instead of 850 and 1900.
jeffiphone said:
It uses the 1900 band to get at&t 3G, correct?
I was thinking about picking one of these up but was worried about 3G coverage with it if it only use 1900 instead of 850 and 1900.
Click to expand...
Click to collapse
Wait a month or so and you can purchase the US variant from Microsoft.
anseio said:
Wait a month or so and you can purchase the US variant from Microsoft.
Click to expand...
Click to collapse
I'm impatient, lol.
jeffiphone said:
I'm impatient, lol.
Click to expand...
Click to collapse
As am I. That's why I have a Cyan UK model for $80 more than I could have purchased the black from Amazon.
anseio said:
As am I. That's why I have a Cyan UK model for $80 more than I could have purchased the black from Amazon.
Click to expand...
Click to collapse
So is anyone using it with at&t and getting 3G coverage?
Hi !
like u see in the title i have a mini pro sk17i and i have no 3G conexion bicause am from colombia and frequency are diferent i want to flash to sk17a to get latinamerica frequency and have 3G conexion in my country. I´m very bored with EDGE conexion.
can i do that? if i can how can i do it?
Thanks very much, sorry my english i speak spanish
t0m4s_g1l said:
Hi !
like u see in the title i have a mini pro sk17i and i have no 3G conexion bicause am from colombia and frequency are diferent i want to flash to sk17a to get latinamerica frequency and have 3G conexion in my country. I´m very bored with EDGE conexion.
can i do that? if i can how can i do it?
Thanks very much, sorry my english i speak spanish
Click to expand...
Click to collapse
It is actually no difrent bro, I'm from Nicaragua and i already tried that, but it is a hardwere problem, the sk17i means that the phone is international type, and sk17a is for america. so unfortunately u can't change that, we will never have 3G with i Series :crying::crying::crying:
Are u really sure? bicause i have a samsung galaxy ace gts5830m and i can change kernel, rom and modem to other version to change 3g frecuency. am asking if ur very sure bicause suddenly u dident flash all ! only rom or well i really dont know how is in sony ericsson phones. but in galaxy u can flash only one. To change only one thing.
Thanks for ur answer
t0m4s_g1l said:
Are u really sure? bicause i have a samsung galaxy ace gts5830i and i can change kernel, rom and modem to other version to change 3g frecuency. am asking if ur very sure bicause suddenly u dident flash all ! only rom or well i really dont know how is in sony ericsson phones. but in galaxy u can flash only one. To change only one thing.
Thanks for ur answer
Click to expand...
Click to collapse
I'm so sure, i spend days trying to find the way to get 3G but i had no luck!!! Is hardware problem, because the 3G that work in Europa does not work in America! I know... that sucks but thats how it is
And btw with sony u can flash as many times as u need!!!
Sent from my SK17i using xda premium
daydu19 said:
It is actually no difrent bro, I'm from Nicaragua and i already tried that, but it is a hardwere problem, the sk17i means that the phone is international type, and sk17a is for america. so unfortunately u can't change that, we will never have 3G with i Series :crying::crying::crying:
Click to expand...
Click to collapse
I think you don't know about telecommunication implementation. How come you can't get 3G with i-series ??? Have you red that phone specification ???. If u know about GSM and 3G implementation as ido (i work in these telecommunication field as an network engineer implementation). If you read that phone spec --> http://www.sonymobile.com/us/products/phones/xperia-mini-pro/specifications/ (see under Networks) you'll see :
GSM GPRS/EDGE 850, 900, 1800, 1900 so for 2G connection it cover all that frequncies that use in all over the world (except Japan, coz Japanese have different 2G and 3G network implementation) see this --> http://www.worldtimezone.com/gsm.html.
UMTS HSPA 900, 2100 (Global except Americas) so it means it cover all 3G frequencies that use outside America.
UMTS HSPA 800, 850, 1900, 2100 (Americas) so it means it cover all 3G frequencies that use inside America.
So why you're all saying that this phone didn't support you're country 3G, except you want to you use your phone in Japan, then it won't works as Japan use 3G with frequecies 1700/2100 MHz. The only possibility that i know is you're area was not coverage by 3G connection or even if that 3G had implemented in your country but it can't reach you're area so this what we called "Blank Spot" area. So please first get to know how the netrwork implemented in you're are, does it coverage by 3G or not.
For the code series, yeah you're right SK17i - it means for international release outside America and SK17a for inside America but it's not related to the frequencies coverage (notice these). SK17x or Xperia Mini Pro has globally working in all over the world that use 2G frequencies 850, 900, 1800, 1900 Mhz and 3G frequencies 800, 850, 900, 1900, 2100 MHz, except you're using it in Japan so it's useless.
googler78 said:
I think you don't know about telecommunication implementation. How come you can't get 3G with i-series ??? Have you red that phone specification ???. If u know about GSM and 3G implementation as ido (i work in these telecommunication field as an network engineer implementation). If you read that phone spec --> http://www.sonymobile.com/us/products/phones/xperia-mini-pro/specifications/ (see under Networks) you'll see :
GSM GPRS/EDGE 850, 900, 1800, 1900 so for 2G connection it cover all that frequncies that use in all over the world (except Japan, coz Japanese have different 2G and 3G network implementation) see this --> http://www.worldtimezone.com/gsm.html.
UMTS HSPA 900, 2100 (Global except Americas) so it means it cover all 3G frequencies that use outside America.
UMTS HSPA 800, 850, 1900, 2100 (Americas) so it means it cover all 3G frequencies that use inside America.
So why you're all saying that this phone didn't support you're country 3G, except you want to you use your phone in Japan, then it won't works as Japan use 3G with frequecies 1700/2100 MHz. The only possibility that i know is you're area was not coverage by 3G connection or even if that 3G had implemented in your country but it can't reach you're area so this what we called "Blank Spot" area. So please first get to know how the netrwork implemented in you're are, does it coverage by 3G or not.
For the code series, yeah you're right SK17i - it means for international release outside America and SK17a for inside America but it's not related to the frequencies coverage (notice these). SK17x or Xperia Mini Pro has globally working in all over the world that use 2G frequencies 850, 900, 1800, 1900 Mhz and 3G frequencies 800, 850, 900, 1900, 2100 MHz, except you're using it in Japan so it's useless.
Click to expand...
Click to collapse
Thaks for the info bro!!! But actually it does not metter how hard u try, u will never get 3G in America with sonys i models... thats just the way they have set it i had a difrent phone before and the 3G worked as good as hell but with this phone i can only use wifi cuz the data connection sucks
Sent from my SK17i using xda premium
daydu19 said:
Thaks for the info bro!!! But actually it does not metter how hard u try, u will never get 3G in America with sonys i models... thats just the way they have set it i had a difrent phone before and the 3G worked as good as hell but with this phone i can only use wifi cuz the data connection sucks
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Can u tell me what's your phone name and type that you say it that3G worked before you use this Xperia ???
I use Samsung Galaxy FIT and i can flash over and over again either thru flashtool (SAMSUNG flashtool named ODIN) or CWM, for a day now i've just reflash my Galaxy FIT with 12 ROM (7 Stock ROM and 5 Cutom ROM) with no problem with 3G Connection. In fact, Samsung has more simplicity in the software system. I've SK17i too, but since it's still have developer guaranted and i have this .62 firmware which must downgrade first to .58 then we can rooted so i'm leave it till my developer guarated expired then i'll install custom ROM too. Now plan to upgrade to ICS but Sony announced it'll decrease the performance, so i'll leave in GB for now.
Actually there's a software system which is involve for locking some frequencies for certain country, it calls MNC/MCC code --> http://en.wikipedia.org/wiki/Mobile_Network_Code. You must first unlock this code for using that Xperia Mini Pro in your country. Are your phone comes with bundling from specific Telecommunication Company like AT&T or Vodafone or else ??? If yes, then your phone MNC/MCC had benn locked. For example :
- If your buy a phone in Europe which is bundling by Vodafone, then u cannot use it in America since it locked for Europe frequencies even the phone has global coverage frequencies but it's locked by that company.
But, as far as i know it included in ROM, so if you change your ROM with full flash then all the system and frequencies will be unlocked, just easy like that. And even your phone comes with bundling with specific country, actually it can't not use at all if your use it another country even for the 2G too, so when you use it say "Unknown Network" or "Network Unavailable" in the display, except your flash it with full flash.
googler78 said:
Can u tell me what's your phone name and type that you say it that3G worked before you use this Xperia ???
I use Samsung Galaxy FIT and i can flash over and over again either thru flashtool (SAMSUNG flashtool named ODIN) or CWM, for a day now i've just reflash my Galaxy FIT with 12 ROM (7 Stock ROM and 5 Cutom ROM) with no problem with 3G Connection. In fact, Samsung has more simplicity in the software system. I've SK17i too, but since it's still have developer guaranted and i have this .62 firmware which must downgrade first to .58 then we can rooted so i'm leave it till my developer guarated expired then i'll install custom ROM too. Now plan to upgrade to ICS but Sony announced it'll decrease the performance, so i'll leave in GB for now.
Actually there's a software system which is involve for locking some frequencies for certain country, it calls MNC/MCC code --> http://en.wikipedia.org/wiki/Mobile_Network_Code. You must first unlock this code for using that Xperia Mini Pro in your country. Are your phone comes with bundling from specific Telecommunication Company like AT&T or Vodafone or else ??? If yes, then your phone MNC/MCC had benn locked. For example :
- If your buy a phone in Europe which is bundling by Vodafone, then u cannot use it in America since it locked for Europe frequencies even the phone has global coverage frequencies but it's locked by that company.
But, as far as i know it included in ROM, so if you change your ROM with full flash then all the system and frequencies will be unlocked, just easy like that. And even your phone comes with bundling with specific country, actually it can't not use at all if your use it another country even for the 2G too, so when you use it say "Unknown Network" or "Network Unavailable" in the display, except your flash it with full flash.
Click to expand...
Click to collapse
The phone I had was a LG Optimus Me (p350) but i also had a xperia play (R800a) and the 3G was good. My girlfriend has a xperia 10 mini pro (U20i) unlocked by the company and she has no 3G if there is a way to get 3G here with this phones, bro that will be awesome!!!!
Sent from my SK17i using xda premium
googler78 said:
I think you don't know about telecommunication implementation. How come you can't get 3G with i-series ??? Have you red that phone specification ???. If u know about GSM and 3G implementation as ido (i work in these telecommunication field as an network engineer implementation). If you read that phone spec --> http://www.sonymobile.com/us/products/phones/xperia-mini-pro/specifications/ (see under Networks) you'll see :
GSM GPRS/EDGE 850, 900, 1800, 1900 so for 2G connection it cover all that frequncies that use in all over the world (except Japan, coz Japanese have different 2G and 3G network implementation) see this --> http://www.worldtimezone.com/gsm.html.
UMTS HSPA 900, 2100 (Global except Americas) so it means it cover all 3G frequencies that use outside America.
UMTS HSPA 800, 850, 1900, 2100 (Americas) so it means it cover all 3G frequencies that use inside America.
So why you're all saying that this phone didn't support you're country 3G, except you want to you use your phone in Japan, then it won't works as Japan use 3G with frequecies 1700/2100 MHz. The only possibility that i know is you're area was not coverage by 3G connection or even if that 3G had implemented in your country but it can't reach you're area so this what we called "Blank Spot" area. So please first get to know how the netrwork implemented in you're are, does it coverage by 3G or not.
For the code series, yeah you're right SK17i - it means for international release outside America and SK17a for inside America but it's not related to the frequencies coverage (notice these). SK17x or Xperia Mini Pro has globally working in all over the world that use 2G frequencies 850, 900, 1800, 1900 Mhz and 3G frequencies 800, 850, 900, 1900, 2100 MHz, except you're using it in Japan so it's useless.
Click to expand...
Click to collapse
You are mixing frequencies from sk17i and sk17a. In the same link you provide from Sony with the specs of MiniPro, there is a link to the white paper (pdf) and you can check that sk17i works with UMTS HSPA 900 (Band VIII), 2100 (Band I), and sk17a with UMTS HSPA 850 (Band V), 1900 (Band II), 2100 (Band I).
So, unless in America the provider was using 2100 band, the user wont get 3G connection with sk17i.
White Paper --> http://www-support-downloads.sonymobile.com/sk17/whitepaper_EN_sk17_xperia_mini_pro.pdf
jomofer said:
You are mixing frequencies from sk17i and sk17a. In the same link you provide from Sony with the specs of MiniPro, there is a link to the white paper (pdf) and you can check that sk17i works with UMTS HSPA 900 (Band VIII), 2100 (Band I), and sk17a with UMTS HSPA 850 (Band V), 1900 (Band II), 2100 (Band I).
So, unless in America the provider was using 2100 band, the user wont get 3G connection with sk17i.
White Paper --> http://www-support-downloads.sonymobile.com/sk17/whitepaper_EN_sk17_xperia_mini_pro.pdf
Click to expand...
Click to collapse
Refer to the white paper, so there's a different between SK17i and SK17. So thanks for correction.
Refer to this link --> http://www.worldtimezone.com/gsm.html <-- , I'm still had curiousity about the hardware, i've used to works as a phone technician in Nokia and Sony Ericsson for about 12 years ago, and you know in that time, different country has different GSM implementation (3G has not been implemented in that time, only GPRS). And sometimes i got outside job to flash another phone of my customer that they bought outside my country says like from Europe, Middle East or China and most of that phone was locked with their country origin Provider, and definitely can't use in my country, so i just flash that phone and sometimes i just only remove the MNC lock code so it can be use in my country. So i'm still curious why if we flash SK17i with SK17a ROM, and still it can't be used to connect to the 3G 1900.
it should actually be sufficent to flash your SK17i with the SK17a version using flashtool. as they are using the same modem chipset with just different frequency table.
slade87 said:
it should actually be sufficent to flash your SK17i with the SK17a version using flashtool. as they are using the same modem chipset with just different frequency table.
Click to expand...
Click to collapse
Yes, i agree with you. Coz in 2000 - 2002 when i used to work as Phone Technician, i saw that the phone only have one component crystal for generating base frequencies, and yeah when we unlock a bundling phone or locked phone we just had to add some files that contains all the GSM frequency table, and then that phone can use in all over country in the world except for country that don't use global GSM frequencies like Japan.
But as inform by mr.daydu19 that he has just do that, and still he can't connect his SK17i which use SK17a ROM to the 3G 1900 America.
Can you provide a link to SK17x schematic diagram as i want to learn the hardware configuration.
Is it possible that maybe there's a hidden code/algorithm in the ROM SK17a so if u inject it to the SK17i then the ROM SK17a recognize that destination phone is SK17i, then it block again the 3G 1900 frequencies table files so we can't use that frequencies ?
Usually you will need to flash the entire FTF of a SK17a version which also includes the baseband, besides that the old x10's had a switch within the build.prop to decide which model it is and changed the frequencies if i remember correctly!
SK17a and SK17i UMTS Block
Now i attached schematic diagram from SK17i and SK17a.
You'll see that SK17a and SK17i has the same UMTS block named UMTS1 Band 1, UMTS Band 2 and UMTS Band 5, it's just on the SK17i at the UMTS Band 5 block it's using different chip with the SK17a. Here the list of the Chip on the UMTS Blok:
A. SK17i :
1) UMTS Band 5 block use chip SKY77705 which is an IC's for Band VIII --> http://www.skyworksinc.com/uploads/documents/201224a.pdf
2) UMTS Band 2 block use chip SKY77702 which is an IC's for Band II --> http://www.skyworksinc.com/uploads/documents/201217b.pdf
3) UMTS Band 1 block use chip SKY77701 which is an IC's for Band I --> http://www.skyworksinc.com/uploads/documents/201216a.pdf
B. SK17a :
1) UMTS Band 5 block use chip SKY77704 which is an IC's for Band V --> http://www.skyworksinc.com/uploads/documents/201222a.pdf
2) UMTS Band 2 block use chip SKY77702 which is an IC's for Band II --> http://www.skyworksinc.com/uploads/documents/201217b.pdf
3) UMTS Band 1 block use chip SKY77701 which is an IC's for Band I --> http://www.skyworksinc.com/uploads/documents/201216a.pdf
So SK17a and SK17i almost have same HARDWARE, the differential only at SK17a it works in three BAND 3G which is 850, 1900 and 2100, and SK17i works in 900, 1900, 2100. Good news is SK17i also has UMTS Band II block, means it can connect to 3G America with Band II which is 1900 MHz.
So if you full flash FTF SK17a to SK17i phone, it means your phone SK17i now can connect to 3G America 850 and 1900, but since the hardware only has 900, 1900 and 2100, so you can't connect to 850 coz it hardware was 900. But still you have 3G America 1900, and if you still can't get connection to 3G 1900 America in your country so i can be sure that your area was not cover by 3G Band II which is 1900 but your area was cover by 3G Band V which is 850 MHz, but since SK17i Band V block works as Band VIII, so it can't connect too. So, like i said before, please make sure what 3G Band that cover in your area and please post in here.
daydu19 said:
The phone I had was a LG Optimus Me (p350) but i also had a xperia play (R800a) and the 3G was good. My girlfriend has a xperia 10 mini pro (U20i) unlocked by the company and she has no 3G if there is a way to get 3G here with this phones, bro that will be awesome!!!!
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
As in my previous post, so there's bad news, since you live in Nicaragua that only has 3G Band V 850 MHz, so it useless for you to fullflash FTF from i-series, since i-series only has 3G Band I - 900, II - 1900 and VIII - 2100 MHz in it's motherboard/module. So now u had to be notice for choosing phone that comes outside your country, even if you want to flashfull that phone.
Same as your girlfriend phone, it has hardware configuration like SK17i, even more bad news to this phone. Coz the schematic comes with only one for all (i mean it's not separate between U20i and U20a), so i can't be so sure if the 3G Band II - 1900 chip was exist for U20i too or it just 3G Band for U20a coz it's same schematic not separated. Even worse news is it comes with two hardware, one is with 3G Band II - 1900 and another with 3G Band IV - 1700. If your girlfriend phone maybe comes with 3G Band IV - 1700, so it's no other way you can get 3G in your country with this phone, but if it comes with 3G Band II - 1900 like SK17i, then u just have to wait till your country provide 3G Band II - 1900 and then u can flashfull FTF your phones.
Hope this helpful, and please take some research for your country 3G Band, what 3G Band has implemented ? and posting it here. Coz as far as i know Nicaragua only implemented 3G Band V - 850. But since you live there, maybe you can get update data.
googler78 said:
As in my previous post, so there's bad news, since you live in Nicaragua that only has 3G Band V 850 MHz, so it useless for you to fullflash FTF from i-series, since i-series only has 3G Band I - 900, II - 1900 and VIII - 2100 MHz in it's motherboard/module. So now u had to be notice for choosing phone that comes outside your country, even if you want to flashfull that phone.
Same as your girlfriend phone, it has hardware configuration like SK17i, even more bad news to this phone. Coz the schematic comes with only one for all (i mean it's not separate between U20i and U20a), so i can't be so sure if the 3G Band II - 1900 chip was exist for U20i too or it just 3G Band for U20a coz it's same schematic not separated. Even worse news is it comes with two hardware, one is with 3G Band II - 1900 and another with 3G Band IV - 1700. If your girlfriend phone maybe comes with 3G Band IV - 1700, so it's no other way you can get 3G in your country with this phone, but if it comes with 3G Band II - 1900 like SK17i, then u just have to wait till your country provide 3G Band II - 1900 and then u can flashfull FTF your phones.
Hope this helpful, and please take some research for your country 3G Band, what 3G Band has implemented ? and posting it here. Coz as far as i know Nicaragua only implemented 3G Band V - 850. But since you live there, maybe you can get update data.
Click to expand...
Click to collapse
I did a little research, and the company my phones is working with has a GSM 1900 with extended coverage, UTMS 850 MHz just for the city I'm at!!! so i guess that i can't use 3G :crying: is that so?
googler78 said:
Refer to the white paper, so there's a different between SK17i and SK17. So thanks for correction.
Refer to this link --> http://www.worldtimezone.com/gsm.html <-- , I'm still had curiousity about the hardware, i've used to works as a phone technician in Nokia and Sony Ericsson for about 12 years ago, and you know in that time, different country has different GSM implementation (3G has not been implemented in that time, only GPRS). And sometimes i got outside job to flash another phone of my customer that they bought outside my country says like from Europe, Middle East or China and most of that phone was locked with their country origin Provider, and definitely can't use in my country, so i just flash that phone and sometimes i just only remove the MNC lock code so it can be use in my country. So i'm still curious why if we flash SK17i with SK17a ROM, and still it can't be used to connect to the 3G 1900.
Click to expand...
Click to collapse
Hi. I have read all what u wrote guys (again sorry my english i can understand good but when i write am not so good) for a moment i thought that what u sed of unlocking frecuencys in sk17i was posible but i realise that yes there are diferent frecuencys in both phones.
am gona respond ur question and if am wrong someone to correct me.
U can flash sk17a rom in sk17i phone i heard a lot of people that do it. the only thing they do is save VPN configuration to conect to 3G network. but these phones came with frecuencys in hardware not in software modem driver mode like my samsung galaxy gt-s5830m that i can change mi modem with ODIN like u sed and rom to transform it in gt-s5830i (Indian model) so if a go to india y can use the 3g network no problem with that. So i think thats the problem with this sony ericsson models that frecuencys are in hardware. i read in taringa some user that said that with flashtool we can modify those frecuencys in the hardware to ad america´s. I send a private messege but he has not respond me. Well in htcmania spanish forum i olso asked but had the same respond that it was not posible and i will be always with EDGE conexion. but if someone have some news we will really appreciate that!!
In Colombia were i live i have
COMCEL NOW CLARO MOVIL
GSM: 850MHz
UMTS/HSDPA: 850Mhz
MOVISTAR
GSM: 850MHz
UMTS/HSDPA: 850Mhz
TIGO
GSM: 1900MHz
UMTS/HSDPA: 1900MHz
Am claro movil so if i use tigo i can have 3G conection with 1900 frecuency in sk17i
t0m4s_g1l said:
Hi. I have read all what u wrote guys (again sorry my english i can understand good but when i write am not so good) for a moment i thought that what u sed of unlocking frecuencys in sk17i was posible but i realise that yes there are diferent frecuencys in both phones.
am gona respond ur question and if am wrong someone to correct me.
U can flash sk17a rom in sk17i phone i heard a lot of people that do it. the only thing they do is save VPN configuration to conect to 3G network. but these phones came with frecuencys in hardware not in software modem driver mode like my samsung galaxy gt-s5830m that i can change mi modem with ODIN like u sed and rom to transform it in gt-s5830i (Indian model) so if a go to india y can use the 3g network no problem with that. So i think thats the problem with this sony ericsson models that frecuencys are in hardware. i read in taringa some user that said that with flashtool we can modify those frecuencys in the hardware to ad america´s. I send a private messege but he has not respond me. Well in htcmania spanish forum i olso asked but had the same respond that it was not posible and i will be always with EDGE conexion. but if someone have some news we will really appreciate that!!
Click to expand...
Click to collapse
sorry this i did not read the second page when i wrote this.
daydu19 said:
I did a little research, and the company my phones is working with has a GSM 1900 with extended coverage, UTMS 850 MHz just for the city I'm at!!! so i guess that i can't use 3G :crying: is that so?
Click to expand...
Click to collapse
Unfortunately you can't use 3G Band V - 850 at this SK17i coz it's hardware only has 3G Band VIII - 900. This is details :
SK17a ROM has 3G frequency table :
1. 3G Band V - 850 ---> flash to SK17i that has chip for 3G Band VIII - 900 ---> so this 850 frequency table not work as hardware at 900. So you forget about this 3G Band V -850, it's useless for you if you wanna use this frequency to your SK17i.
2. 3G Band II - 1900 ---> flash to SK17i that has chip for 3G Band II (according to schematic diagram, it can be exist or not) ---> so this frequency table and hardware are matching so it'll work.
3. 3G Band I - 2100 ---> this of course match to SK17i, but since your living in America that's not implemented this frequency so forget about this frequncy too. But according to this link ---> http://www.worldtimezone.com/gsm.html some country in America has implemented this frequency too. So just take some research for what 3G Band your area covered.
Now, all we can rely is to the 3G Band II - 1900. I've just email some of my friends that still working as a technician in Sony to make sure that the 3G Band II - 1900 chips is exist in the SK17i motherboard/mainboard but still got no respons. But from my experience as a technician for about 16 years and since my school basic was in Tehcnical, if some component was not exist in BOARD but exist in SCHEMATIC so that component must be marking .or surrounding with "dash-line". And as you seen that our SK17i 3G Band II - 1900 chips was not marking or surrouding with "dash-line" so it's must be exist.
---------- Post added at 09:42 PM ---------- Previous post was at 09:38 PM ----------
t0m4s_g1l said:
In Colombia were i live i have
COMCEL NOW CLARO MOVIL
GSM: 850MHz
UMTS/HSDPA: 850Mhz
MOVISTAR
GSM: 850MHz
UMTS/HSDPA: 850Mhz
TIGO
GSM: 1900MHz
UMTS/HSDPA: 1900MHz
Am claro movil so if i use tigo i can have 3G conection with 1900 frecuency in sk17i
Click to expand...
Click to collapse
As my theory yes. Maybe you can try it and give result in this page. And make sure TIGO really works in 3G 1900 not two band, coz sometimes telecommunication provider expand their network by add another 3G Band but they not announced that as they don't have to. So this is what you've got to do:
As i used too works as customer service/front-desk from a providerGSM/3G card, you've come to one of TIGO customer representative office and asking if their GSM/3G card are works in 1900 only or two bands which is 850/1900 ??? If only 1900 then you don't have to changes/request to a new card. But if they card works in two band, then you have to request new card only works for 1900, as you wanna prove my theory if it's right or wrong. Coz if you put card that has two bands which is 850 and 1900, maybe your ROM can detect the 850 and it algorithm push only the 850 frequency table to works too, so the 1900 will not works. So just to make sure, please do as i say above.