I dont know what i am doing wrong i have bricked 3x trying to get this going. Ok here is the scoop one final time. I am on HKTW rigght now and i go to the CMW and flash the 4.5 it starts off smooth and then it gets stuck at the web-top permissions for some reason. DO i have to start from a lower build and update? I am determined to get this working tonight because i really dont want to get comfy with the HKTW because ill loose a lot when i eventually do flash. So some instructions please do i have to wipe anything before flashing? Please help me out and i leave yall in peace
Try with beta 3 first, I went from hktw to beta 3 with no issues
Sent from my MB860 using XDA App
Do you mind giving a little more info? What version of the CWM you are using might help, what exactly you mean when you say it gets stuck at the Webtop permissions, which exact version of 2.3.4 are you trying to install...
If you mean it hits Webtop during the install and doesn't go anywhere... well, for some reason Webtop takes for godawful ever to install. Several minutes. Try letting it sit for a little while?
Same boat
I'm in the same boat as you frankie. Had to flash back to HKTW because it kept getting stuck on dual core technology screen. Tried both Kens and Nava's GB .zips with no luck. Just realized my CWM is outdated, but I don't see how that would be the problem. The installation with Kens GB says its completed but the green bar isn't full, I let it sit and it fills up. I will update CWM and try again.
Try the beta 3 NOT 4.5
Sent from my MB860 using XDA App
LMFAO I'm an idot... It was the outdated CWM, I updated it and it installed Kens GB ROM with no problem. Frankie I hope this works for you.
Funny how one small thing can break everything, isn't it?
True that, I think the main issue was the wipe data/format. Which the new CWM fixed
D$G THANK YOU for realizing what your mistake was. You know what? I have been making the exact same mistake. An old version of CWM, and getting stuck at the dual core screen. I get a feeling it will flash correctly for me this time. I hope the OP gets his own problem fixed.
yea thanks for real but how do i know which version i am using of it lol
[Edit] HAHHAHAHAHAHAHAH IT WORKS its because i didnt have updated CMW but more important i cannot flash the radio.... why?
You have to flash the radio via RSDLite
Sent from my MB860 using XDA App
Related
So I'm a noob to this whole rom thing and i think that i am in over my head...
first i rooted using GingerBreak-v1.20.apk and not knowing what i was doing deleted some of the bloat (games). When I tried to do the bell gingerbread ota update i got the error. I tried to re install them but it didn't work.
So i decided to try to rom my phone.
First i unlocked using the Bell_Ihop from http://forum.xda-developers.com/showthread.php?t=1136261 which worked...
I then flashed a rom from ROM manager. It was ninja v0.3.4 (i think). It worked but i got a grey ? battery error... I didnt realize and my battery ran down. And while i cant be 100% sure yet i dont think my battery works any more (is that possible)
so i posted a Q on the forums and got an answer here http://forum.xda-developers.com/showthread.php?t=1251529
I borrowed a battery which let me turn on my phone but was still unknown...
I followed his answer and did a wipe. I decided i wanted alien so i flashed tanfer cmw recovery and flashed alien using that.
and I got stuck on the boot screen
so i did a wipe again and tried to reboot to bell stock2.2.2 and got an error so i did a reboot and i guess that the stock managed to reinstall the regular recovery..
and im still stuck on the reboot page...
so my question is I cant do anything cuz my battery doesnt work so i cant reflash cmw and I dont know anyone with an atrix to get a battery from (im pretty sure i outstayed my welcome in my local bell store, thats where i did all this)
Is there anyone in toronto that would fix this for me, i need this phone and i would pay for someone to do it for me cuz i cant do anything myself!! (And I'm a noob)
Thanks in advace...
first off, use this to charge your battery: http://www.youtube.com/watch?v=BDtv7qKf8tQ
after you get a charge on your battery again, go into CWM and clear Data/Cache, and then go into Advanced Options and clear your Dalvik Cache.
after that, flash any ROM and try to boot up. if you get stuck into a bootloop, post back here and let us know.
you'll need to flash CWM again using Fastboot, i suggest Romracer's which can be found here: http://forum.xda-developers.com/showthread.php?t=1204500
Thanks I will try this but I have a few questions
1. I did all this (the wipes and the flash) with tenfars, will this make a diff?
2. What tegrapart am I? (remember I cant boot into my phone to check through terminal emulator)
3. Now that I have been traumatized i just wanted to ask, on the alien site he says that it will take an unbearably long time to boot, how long should I expect to wait?
thanks for putting up with my "noobyness"
I don't know how to find your tegra part but it might take up to a few minutes the first time you boot. You'll know if you get a boot loop or not, the whole animation will do a major skip and start back from the start
And I know some people have problems with tenfar's. romracer's is just superior in my opinion.
Sent from my MB860 using xda premium
will i get messed up if i use the wrong tegra?
mypcool said:
will i get messed up if i use the wrong tegra?
Click to expand...
Click to collapse
You shouldn't, as long as all you're doing is flashing ROMs with cwm. All else fails you can just flash a different one.
Sent from my MB860 using xda premium
I tried the battery trick and it caused the usb jacks on my computer to stop working... I also tried to charge with a different phone and it didnt work. I called Motorola and am getting a new battery...
Has anyone ever had this happen that a battery should stop getting a charge at all after a flash?
Buy a cheap wall charger and battery from ebay.
Sent from my MB860 using xda premium
After I flashed the atrix alien port to my X2 my phone no longer recognizes my battery and will not charge it. Is anyone else having this problem? Are there any fixes to address this problem? If this has been addressed somewhere else I apologize I couldnt find it. Any help is appreciated, dont want to have to sbf back to stock.
Thanks
AW
atcbrownie said:
After I flashed the atrix alien port to my X2 my phone no longer recognizes my battery and will not charge it. Is anyone else having this problem? Are there any fixes to address this problem? If this has been addressed somewhere else I apologize I couldnt find it. Any help is appreciated, dont want to have to sbf back to stock.
Thanks
AW
Click to expand...
Click to collapse
Are you on v0.2 or v0.2.2?
when it happened to me I'd made the mistake of installing the rom over froyo
dragonzkiller said:
Are you on v0.2 or v0.2.2?
Click to expand...
Click to collapse
using v0.2.2. I just sbf'ed to 2.3.3 and am letting the batt charge again and am going to try to wipe the battery stats and see if that works. Thanks for the help, I will post my results.
Well just finished sbf'ing and flashing v0.2.2 again making sure to wipe dalvik, battery, cache, and data factory reset. Still get the battery message that says battery not recognized wil not charge.
If there are not any other ideas by tomorrow morning when I get up I will sbf again and try to download again and re-flash v0.2.2. Maybe a file was corrupt or something, I dunno.
Has anyone else had this problem?
Are you using a Motorola battery? Sometimes generics don't play well with custom roms.
Sent from my DROID X2 using xda premium
yep stock battery.
Well i have other issues other than the battery. The phone randomly goes crazy and just starts acting like I am hitting buttons, opening programs and typing random letters. I tried re-downloading the rom and re-flashing but still the same issues with the battery. I guess I will sbf back to stock and wait for another update. who knows it may be an issue with my phone since no one else seems to have this problem.
Thanks
AW
I've been using this ROM version since I released it and have yet to run into any problems you described. Is there any other information you can give me?
Sent from my DROID X2 using XDA App
Yes this happend to me. What you did was probally flashed oved 2.2. Thats a no.no. Heres the fix. RSD flash the official verizon 2.2. then root with gingerbreak. Then install custom recovery. Enter recovery mode. Wipe all. You must do this for it to work.Flash P3's pre rooted gingerbread. After install then go into recovery, wipe again then flash alien rom. It worked for me. You cant cross flash roms, they have to go into this order. 2.2, 2.3.3, 2.3.4.
Sent from my DROID X2 using, wait is that a Gorilla?
Furioustylez said:
Yes this happend to me. What you did was probally flashed oved 2.2. Thats a no.no. Heres the fix. RSD flash the official verizon 2.2. then root with gingerbreak. Then install custom recovery. Enter recovery mode. Wipe all. You must do this for it to work.Flash P3's pre rooted gingerbread. After install then go into recovery, wipe again then flash alien rom. It worked for me. You cant cross flash roms, they have to go into this order. 2.2, 2.3.3, 2.3.4.
Sent from my DROID X2 using, wait is that a Gorilla?
Click to expand...
Click to collapse
I appreciate your effort to help but this is not what happened. I flashed from the official Verizon 2.3.3, then used red lite to she back and tried again. I have tried this rom at least 4 times now everytime I get the same results.
Dragon, thanks for your willingness to help. Basically what happens is the rom v0.2.2 flashes with no errors. When the phone boots I immediately get a message saying that my battery is not recognized and that I need to install a moto battery. After I hit the ok button the phone acts like a pc when you mash on the keyboard all different apps open up, random keys get typed, when I hit the home button the programs just open back up like ten at a time. Its kinda hard to explain. When I get off work tomorrow I will try to reflash ATRIX alien and post a video of what is going on.
atcbrownie said:
When the phone boots I immediately get a message saying that my battery is not recognized and that I need to install a moto battery. After I hit the ok button the phone acts like a pc when you mash on the keyboard all different apps open up, random keys get typed, when I hit the home button the programs just open back up like ten at a time. Its kinda hard to explain. When I get off work tomorrow I will try to reflash ATRIX alien and post a video of what is going on.
Click to expand...
Click to collapse
I have seen videos of x2s doing this on youtube, probably need a new phone
Sent from my DROID X2 using XDA App
atcbrownie said:
I appreciate your effort to help but this is not what happened. I flashed from the official Verizon 2.3.3, then used red lite to she back and tried again. I have tried this rom at least 4 times now everytime I get the same results.
Dragon, thanks for your willingness to help. Basically what happens is the rom v0.2.2 flashes with no errors. When the phone boots I immediately get a message saying that my battery is not recognized and that I need to install a moto battery. After I hit the ok button the phone acts like a pc when you mash on the keyboard all different apps open up, random keys get typed, when I hit the home button the programs just open back up like ten at a time. Its kinda hard to explain. When I get off work tomorrow I will try to reflash ATRIX alien and post a video of what is going on.
Click to expand...
Click to collapse
Unfortunately, there appears to be no real solution to this. I hate to say that, but no one else is having these issues, then it must simply be a problem with your phone. I wish you luck, but there's not much I can do if your phone is acting up. I wish there was more I could do to help.
dragonzkiller said:
Unfortunately, there appears to be no real solution to this. I hate to say that, but no one else is having these issues, then it must simply be a problem with your phone. I wish you luck, but there's not much I can do if your phone is acting up. I wish there was more I could do to help.
Click to expand...
Click to collapse
Thanks for your help I don't know what the issue is, it doesn't happen on stock gingerbread just on the ATRIX rom. Thanks anyway. I will keep an eye on your dev thread and will try again when the next patch comes out.
when i was on the alien port i did not have any battery problems. did the same thing as you sbf'ed to the official verizon 2.3.3 rooted and then onto the alien rom. my friend was having some issues however and what helped him was sbf'ing to 2.2.2, then rooting, then flashing p3's pre-root gingerbread onto that. after that his phone accepted the alien rom just fine. not sure what if any difference there is between the methods but it helped him.
Yeah like I said you cAnt do that . You have to flash 2.2 first
Sent from my DROID X2 using XDA Premium App
Does anyone know what the issue is with the newer versions of the Rocko rom? I've tried out at least 4 other roms without any problems but Rocko 2.1 and 2.2.1 both seem to just sit at the motorola screen on the front. After I left it for 30 minutes or so 2.2.1 started showing the boot animation, but after another 30 minutes it was still just repeating so I think something is broken.
Ive wiped everything and flashed it with no problem I have feeling its the kernel that is not working for some people I would try
1.flash Rocko 2.2.1
2.flash kernel of choice
Shouldn't take more then 5 mins honestly
And im guessing your unlocked?
Sent from my MB855 using xda premium
Wow, thanks for getting to me so soon.
Firstly I am definitely unlocked.
I'll give the flashing and switching kernel thing a try in a bit. I'm having the same problem with redROCKO1.1.1 too which is a bit odd.
I used TWRP 2.0 to install it, it shouldn't matter whether I use that or CWM, right?
Edit: Do you recommend a particular kernel? I've only flashed roms that already had their own kernels in the past.
Edit 2: I keep getting a message "E:Cannot load volume /misc!", could that be the problem?
Edit 3: I flashed Rocko 2.2.1 now for the third time and it started showing the boot animation properly after about 5 minutes. Another 10 minutes later and the boot animation isn't looping properly and the screen turns black for a second before it loops again.
Gene- said:
Wow, thanks for getting to me so soon.
Firstly I am definitely unlocked.
I'll give the flashing and switching kernel thing a try in a bit. I'm having the same problem with redROCKO1.1.1 too which is a bit odd.
I used TWRP 2.0 to install it, it shouldn't matter whether I use that or CWM, right?
Edit: Do you recommend a particular kernel? I've only flashed roms that already had their own kernels in the past.
Edit 2: I keep getting a message "E:Cannot load volume /misc!", could that be the problem?
Edit 3: I flashed Rocko 2.2.1 now for the third time and it started showing the boot animation properly after about 5 minutes. Another 10 minutes later and the boot animation isn't looping properly and the screen turns black for a second before it loops again.
Click to expand...
Click to collapse
Twrp had some problems flashing roms i like cwm better did you flash a different kernel?
Sent from my MB855 using xda premium
Working on the kernel now. Did you know that most of the sites hosting Joker's 1.4 highpro kernel have taken it down on copyright grounds?
Gene- said:
Working on the kernel now. Did you know that most of the sites hosting Joker's 1.4 highpro kernel have taken it down on copyright grounds?
Click to expand...
Click to collapse
Yup most of us used multiupload.com sucks
Sent from my MB855 using xda premium
Flashed the 1.4 highpro kernel, same thing as before. The boot animation doesn't loop properly and nothing seems to be happening. I have to head out now so I'm just going to reflash my old setup for now and try to work on this more later tonight, thanks for your help. If you can think of anything I'll get to it later but the big thing I'm going to try is to flash cwm recovery back and see if installing with that makes a difference.
Gene- said:
Flashed the 1.4 highpro kernel, same thing as before. The boot animation doesn't loop properly and nothing seems to be happening. I have to head out now so I'm just going to reflash my old setup for now and try to work on this more later tonight, thanks for your help. If you can think of anything I'll get to it later but the big thing I'm going to try is to flash cwm recovery back and see if installing with that makes a difference.
Click to expand...
Click to collapse
im getting off of work soon ill try to see whats wrong with it
Sent from my MB855 using xda premium
So I tried it after flashing cwm back, still the same problem. Give up?
Edit: I also tried fixing permissions, and flashing the kernel over the kernel of my old HomeBase setup, the problem doesn't seem to be with the kernel.
What in the startup do you think could be erroring out/going in an endless loop?
Same things happens to me on 2.1.1 version and on 1.1.1 version after booting contating network its show than it show for activating if I press ok than again contating network comes its repeating again and again and this issue I face on joker and magnifier roms plz som1 help on this I, m on 198_7 rooted and unlocked
Sent from my MB855 using xda premium
Can anyone else confirm not being able to download the unlocked versions, I try and get a10kb file not the150mb any ideas
pintopunk said:
Can anyone else confirm not being able to download the unlocked versions, I try and get a10kb file not the150mb any ideas
Click to expand...
Click to collapse
That happened to me when I tried d/l from my phone (several times). It downloaded fine on my computer tho.
Sent from my MB855 using XDA App
Thank you will try that way
Sent from my MB855 using XDA App
Gene- said:
Does anyone know what the issue is with the newer versions of the Rocko rom? I've tried out at least 4 other roms without any problems but Rocko 2.1 and 2.2.1 both seem to just sit at the motorola screen on the front. After I left it for 30 minutes or so 2.2.1 started showing the boot animation, but after another 30 minutes it was still just repeating so I think something is broken.
Click to expand...
Click to collapse
i was running cm7.2 and flashed this with no problems,it took like 5 mins to boot up but it and now im running rocko odex2.0 maybe thats why i had no issues with the boot up. trying flashing the odex one if you are unlocked
same here. Its good to know that there are people on here that respond quickly to help!
So i purchased an atrix 4g off of eBay, and it has a few Root applications on it, but isn't actually rooted.
The android recovery mode is also broken, i get an android robot with the Attention symbol. Would post a link to one i found on the internet but i cannot since i am under 8 posts.
The phone was on 2.3.6 build # 4.5.141 when i received it. and i have done nothing to it so far.
So maybe someone applied OTA updates and killed the root or something, idk.
in the end the end i would like to root it with some ISC.
So is there anyway i can Reset everything to stock out of the box. Or to fix the problems with recovery?
Also for now it wont really be used as a phone, as i don't have a sim yet.
To cover the basics here let's make sure the phone isn't bootloader unlocked or rooted. To check bootloader, when you boot the phone, does the moto screen say "Unlocked" in top left hand corner of the screen? If not, it isn't. Then for root, check it with the app root checker basic or pro from market. Get back to the thread once you can answer those questions and then I will post something to help you with the getting ics.
Sent from my Atrix with XDA Premium
Both of those come up as a no So no unlocked boot loader and no root
Try this but you know the risks of messing with the phone right??? Read EVERYTHING before you do. Your phone says a different version of firmware than the thread but if you look back in the posts of the thread in the end, it will work. You can also read the Atrix thread stickies.
Edit.... having trouble posting link ... give me sec.
Edit 2....can't post from phone. Let me post it from my computer when I get to the computer in the morning.
Sent from my Atrix with XDA Premium
Is this the link you wanted to post?
http://forum.xda-developers.com/showthread.php?t=1182871
If so i cant go through with it because my "Android Recovery" menu is broken.
Ahh now i see, i was selecting the wrong option stupid me
Ok now i have my bootloader unlocked CMW installed, wouldn't boot into android just sat there on M dual core screen for a long time. Ok tries to install another rom
MIUI but that has the same problem gets stuck at That Screen, i can still get into recovery, and everything.
Now what?
dfanz0r said:
Ok now i have my bootloader unlocked CMW installed, wouldn't boot into android just sat there on M dual core screen for a long time. Ok tries to install another rom
MIUI but that has the same problem gets stuck at That Screen, i can still get into recovery, and everything.
Now what?
Click to expand...
Click to collapse
Did you wipe before installing?
Sent from my MB860 running Jokersax's CM9
Yes i wiped
dfanz0r said:
Yes i wiped
Click to expand...
Click to collapse
Try cm9. Here's the order you should do it in:
1. Full wipe
2. Flash 0.6
3. Flash 0.6 again
4. Flash gapps
Sent from my MB860 running Jokersax's CM9
dfanz0r said:
Is this the link you wanted to post?
http://forum.xda-developers.com/showthread.php?t=1182871
If so i cant go through with it because my "Android Recovery" menu is broken.
Ahh now i see, i was selecting the wrong option stupid me
Click to expand...
Click to collapse
Yup that was it.
Glad you found it.
Sent from my Atrix with XDA Premium
giqbal said:
Try cm9. Here's the order you should do it in:
1. Full wipe
2. Flash 0.6
3. Flash 0.6 again
4. Flash gapps
Sent from my MB860 running Jokersax's CM9
Click to expand...
Click to collapse
This doesn't work either same result
Does anyone else have any ideas?
dfanz0r said:
Does anyone else have any ideas?
Click to expand...
Click to collapse
Have you flashed a different ROM for the time being to at least have a working phone? Like a blur or cm7 ROM?
Sent from my Atrix with XDA Premium
Thats is what i was going to try next, i havent got to it today.
Are you flashing plugged in? Try flashing the rom without having your phone plugged in.
Also, if you're at the M logo screen, I suggest waiting it out for quite a while. Be patient. I used to think when I flashed roms that I was stuck at M logo, but I just wasn't waiting long enough, especially coming from a full wipe.
Otherwise, try doing a battery pull and then putting it back in and booting it up.
You can also try using Nottachtrix with the installer? I've heard that fixes a lot of people's problems that are getting stuck at logo screen.
well right now it seems that the battery is dead and wont charge....
So im not sure what im gonna do about that
Ok so im installing NottachTrix now will report how it went when done.
Also about leaving it on to boot, i did that for 24 hours, nothing happened
Edit:
It seems to be working so far. The phone is stuck at a charging screen with a battery icon, much more than it was before.
dfanz0r said:
Ok so im installing NottachTrix now will report how it went when done.
Also about leaving it on to boot, i did that for 24 hours, nothing happened
Edit:
It seems to be working so far. The phone is stuck at a charging screen with a battery icon, much more than it was before.
Click to expand...
Click to collapse
Wipe cache partition, wipe data, wipe delvik. Install Rom (cm7). Reboot recovery. Install gapps. Reboot now. If it's not working perhaps you cwm is outdated?
Sent from my MB860 using xda premium
NottachTrix works fine so far, my battery just needed to charge some.
(SOLVED) hello neighbors. I am having an issue... my atrix will only boot if i install honey atrix on it. i have tried many other roms. many different times. i have wiped all data cache partitions, dalvik, battery stats, formatted system, dat, cache. And still i can get nothing to boot besides Honeyatrix rom.
it seems to load them from the zip file ok just wont boot past the unlock dual core screen. i have let it set for 10-20 min to see if it will boot and nothing.
i had recieved this under warranty and it was shipped with the new 2.3.6. 4.5.91 and i rooted and unlocked using the unlock tool v.4.
any help with this would be greatly appreciated
thanks in advance,
SErooted
Try a full wipe with fastboot before flashing. Also may need to flash appropriate kernel. What ROM's have you tried?
Sent from my MB860 using xda premium
ive tried cherry pie, algorythm, cm7, neutrino, miui many of them, and i have never had this problem with my other atrix. just this one doesnt seem to be want todo anything but this one rom. and i have done a full wipe in moto fastboot as well. i forgot to mention it earlier.
SErooted said:
ive tried cherry pie, algorythm, cm7, neutrino, miui many of them, and i have never had this problem with my other atrix. just this one doesnt seem to be want todo anything but this one rom. and i have done a full wipe in moto fastboot as well. i forgot to mention it earlier.
Click to expand...
Click to collapse
Which recovery are you using?
Maybe install it again or try another one, perhaps its not installing properly
Sent from my MB860 using xda premium
i have used cwm and tefnars recovery. i have installed each rom several times and still no change. it will only boot into honey atrix rom. i am really wanting to put miui back on and i have checked the latest by stevend25 ( sorry if spelled wrong) and i can go through the set up process but upon reboot, it wont boot past the startup screen.:-(
Damn replacement device!!!
Seriously people>>>> not one of you has insight on what the problem may be? i am not new to this phone or modding it and this is the first time ive ever had a problem and the community cant help?
PATHETIC!!!
Just wait somebody will answer you, be patience. If u act like this, sure nobody won't help you.
Inviato dal mio Atrix con Tapatalk
SErooted said:
Seriously people>>>> not one of you has insight on what the problem may be? i am not new to this phone or modding it and this is the first time ive ever had a problem and the community cant help?
PATHETIC!!!
Click to expand...
Click to collapse
Since it was almost 2 weeks between the last post trying to help you and your posts yesterday it's pretty safe to say everyone thought you had solved your problem and moved on. After this latest post, it's probably also safe to say you won't receive any more help.
SErooted said:
Seriously people>>>> not one of you has insight on what the problem may be? i am not new to this phone or modding it and this is the first time ive ever had a problem and the community cant help?
PATHETIC!!!
Click to expand...
Click to collapse
You are not entitled to help from anyone. Keep that in mind while making future posts. Always be kind and respectful to other members in the community.
SErooted said:
i have used cwm and tefnars recovery. i have installed each rom several times and still no change. it will only boot into honey atrix rom. i am really wanting to put miui back on and i have checked the latest by stevend25 ( sorry if spelled wrong) and i can go through the set up process but upon reboot, it wont boot past the startup screen.:-(
Damn replacement device!!!
Click to expand...
Click to collapse
your recovery is the problem install rom manager from market and update cwm or try romracer recovery.
Could also be the baseband radio. If that doesn't fix, looks like its time for the dreaded sbf.
Sent from my MB860 using XDA
I would also use the latest romracer recovery or twrp from here http://forum.xda-developers.com/showthread.php?t=1400641. Also be sure to use appropriate kernel for the rom you are flashing and try the stock clocked kernels first. Good luck.
Sent from my MB860 using XDA
hmmmm I wondering on this one if his internal might be mal-partitioned.. I had this problem and was cured using mini tool partition wizard. Start off by making sure all's formatted fat 32 primary. Once you're assured of that, format again, fastboot - w and reinstall something like neutrino. Twice for good measure. Boot it , wait 60 seconds, pull battery and reboot. Lemme know bro if that helped..
Sent from my SGH-I997 using xda premium
How to make atrix's internal partition (system, osh, etc) to be detected by mini tool?
Sent from my MB860 using xda premium
Thank you all for your insight. Im happy that you have responded. Please forgive my frustration. It just has been annoying to keep this software on my attic as there are other Toms I enjoy. Ill let you all know how it goes
Sent from my MB860 using XDA App
i had wondered if this was the problem but i have tried cwm from market and tefnars recovery and had the same issue with both.
Thank you for your ionsight into this. it really has been bothering me.
ok everyone.... thank you all for your help in getting the matter resolved. it was an issue with recovery and i am now running with twrp instead of cwm or tefnar. miui is now running and am going to see what kinda fun i can have with it. Thanks again everyone!!!