Related
It will charge when its usb to PC but not wall.
Anyone have the problem before and know if its fixable?
Tried 2 different Cables that worked before also will try again when home with official charger.
The wall charger will be the problem most likely since most cells use 500mha to charge and the ATRIX charger uses upto 1000mha the ATRIX wount even recognize a charge cycle with less then 600 mha
Sent from my ics+darkside multiboot mb860 using xda premium
So I will get the regular charger for gs3 that comes with the phone (tomorrow when i get the phone). but i also have the HP Touchpad charger which gives output of 2.0A. I was wondering if I charge my phone with the HP charger will it actually charge is faster then the regular gs3 charger? the reason i ask is cause in other threads ppl have mentioned that it only charges faster with non - stock roms like aokp or aosp roms. please lemme know if this will work. thanks
It should I got one of those and it does charge faster I got the bb one tho
Sent from my SGH-T999 using Tapatalk 2
I've used my BlackBerry PlayBook charger on mine and it doesn't charge any faster. That charger is 1.8amp.
It will not charge faster. The phone only draws as much amps as its allowed to. Whether you use a 1 amp charger or a 2 amp charger, it'll only charge at the phones own rate
Sent from my SPH-L710 using xda app-developers app
then theres basically no advantage to using some other charger?
I don't believe so. The phone only draws what it needs.
Sent from my SPH-L710 using xda app-developers app
A lot of chargers will be rated less than the stock charger. Especially cheap car chargers. In that case the phone can only draw at the charger rating.
alirulzz said:
then theres basically no advantage to using some other charger?
Click to expand...
Click to collapse
Unless you run a custom kernel that allows for higher charge rates.
Sent from my ADR6400L using Tapatalk 2
I have a dual car/wall charger and I noticed when plugged in the car it charges faster.
Sent from my vivow using Tapatalk 2
The values listed on the charger is the max output it can provide. If the setting on the phone or the hardware is set up to only pull 1A, then it will always pull that unless that is more than what the charger can provide.
That being said, you should be able to take the battery out and charge it faster separate from the phone. I've always read, though, that charging a battery faster ( i.e. turning up the current) will/may reduce the life of the battery
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
the only way I have found to charge phone's faster is to power it off and then charge...takes about half the time to fully charge
none of the 2 amp chargers make it any quicker
alirulzz said:
So I will get the regular charger for gs3 that comes with the phone (tomorrow when i get the phone). but i also have the HP Touchpad charger which gives output of 2.0A. I was wondering if I charge my phone with the HP charger will it actually charge is faster then the regular gs3 charger? the reason i ask is cause in other threads ppl have mentioned that it only charges faster with non - stock roms like aokp or aosp roms. please lemme know if this will work. thanks
Click to expand...
Click to collapse
I have a Touchpad charger and it can be used, though I noticed that the phone got hotter than normal, IMO. The phone comes with a 1.0A combo wall charger with USB cable. Interestingly the Samsung stand and battery charger that comes with the spare battery comes with a .7A charger but the charging unit itself is 500mA/1A on the input with output at only 4.2v @ 450/900mA.
Recently I traded my galaxy nexus for a galaxy tab 10.1. But whenever I plug it into a computer or an outlet there's a red x on the battery... it charges reallllly slow. I left it to charge for nine hours from an outlet while turned off, and it went from 5% to 55%. WOW. That's really slow. So I thought that the problem is the cable so I bought a new cable that came with a car adapter. And it worked like a charm in the car. However when I traded I kept the 3 pronged galaxy nexus charger. So anyways I arrived home happy, but I wanted to test it in the computer... Red x again. I tried the wall outlet, again with the x. I tried the wall outlet with 110v and 220v still red x. Then I looked at both outputs on the wall charger and car charger both had the same output which is 5volts and 1A. Then I looked at the input and the car charger was 12-24VDC and the wall outlet was 100-240v and 50Hz and 0.15A. I need help please.
I have 3.2 honeycomb and P7500.
I think that this is an internal issue software wise.
If you need anymore information don't hesitate to ask.
Thanks in advance
Sent from my GT-P7500 using xda app-developers app
On stock settings u wont be able to charge the device connected to ur computer and u will get the Red X on the battery icon! Therez a small tweak to activate that feature to activate charge on pc connect but u will loose the mtp connection. As far as this issue... Seems to be a battery proble. Still try to flash and get to stock to confirm.
Sent from my GT-P7500 using xda premium
What do you mean by loosing mtp? Also I'm a bit noobish at this because I just switched from ios. So can you dumb Down what you said a little. And what do you mean by "still try to flash and to get stock to confirm."
Also my problem is wall charging.
Sent from my GT-P7500 using xda app-developers app
I get that if I try use galaxy nexus charger, however if I charge my galaxy nexus with the tab 10.1 charger I have no problems, make sure your using the correct charger, and for the slow charging I have a USB extension cable if I use that it can take up to 12 hours for a full charge
By charger do you mean cable or outlet?
Sent from my GT-P7500 using xda app-developers app
simplest answer is that the red X means that you're not supplying enough voltage to your tablet. You need 2A (A = Amps), computer USB ports generally do 500mA (1/4 of what you need). Phones usually need less. So the reason your tablet won't charge off the phone charger is because it doesn't supply enough voltage; the phone does fine on the tablet charger because it's just oversupplied (don't worry, your phone won't be damaged by this!)
So what you need is:
1) an original charger for this particular tablet (the cable probably isn't the issue, but I've seen cables that can't transmit the full voltage. The nook color is a good example of this)
2) a 2A charger - can't promise any particular ones work though...
3) (and this is the one you should do): You're on XDA. This is a place for folks who root and install custom ROMs on their devices. Most of the ROMs have USB charging built-in (in the Kernel; don't worry about what that means). Install a custom ROM (I'd suggest AOKP). Problem solved, plus you've increased both performance and functionality of your device exponentially. If you're not willing to do this, XDA probably isn't the place for you anyways.
Ayouby said:
By charger do you mean cable or outlet?
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
The outlet , the one for my tab is twice as big as my Gnex one, I guessing they both give out different power, get the official charger!! like I said I can replicate that any time I want by using the tab cable with my Gnex outlet,
Thank you soooo much
Sent from my GT-P7500 using xda app-developers app
I found a solution to a problem that was really vexxxxing me. One of my chargers was working and the other (longer lead) all of a sudden started showing the red cross. Ahhh. The solution (http://www.androidtablets.net/forum...galaxy-tab-10-1-not-charging-brand-new-3.html) was to blow very hard on the 30 pins of the charger and hey presto - started charging again without the red cross.
There are solutions to this problem with quite a few custom ROMs. Task's ICS for example has this patched. I am quite certain there are others.
Phone was plugged into mobile USB debugging enabled and was developing through ADT.
is this okay or there is some problem with my mobile?
Stock rom/kernel
Sent from my GT-I9300 using xda app-developers app
Check what the current_max is when it is charging using this app: http://forum.xda-developers.com/showthread.php?p=36124435
It happened to me too once. When I checked, the phone was charging at 100 when it should charge at 1000. Unplug abs re-plug the USB from the phone when the charger is connected to the mains. That should solve the issue. :thumbup:
Sent from my GT-I9300 using xda app-developers app
i had this problem too, which i suspect that the charging port on my phone is damaged. anyways microusb ports usually tend to wear out over time and separate from the mainboard slightly giving a intermittent connection.
now i am using a wireless charger and it is charging much faster then my phone on mains.
That is 500ma on wireless vs 1A on wall.
battery
exge said:
i had this problem too, which i suspect that the charging port on my phone is damaged. anyways microusb ports usually tend to wear out over time and separate from the mainboard slightly giving a intermittent connection.
now i am using a wireless charger and it is charging much faster then my phone on mains.
That is 500ma on wireless vs 1A on wall.
Click to expand...
Click to collapse
take out the battery.
through recovery reset battery stats and you'll be fine..
exge said:
i had this problem too, which i suspect that the charging port on my phone is damaged. anyways microusb ports usually tend to wear out over time and separate from the mainboard slightly giving a intermittent connection.
now i am using a wireless charger and it is charging much faster then my phone on mains.
That is 500ma on wireless vs 1A on wall.
Click to expand...
Click to collapse
Wireless charger? Whaaaat? Which country you're in? I thought that, it hasn't launched yet.. Atleast in India it has not.
Anyway.. Now I was charging through the normal charger via plug.. It works just fine..maybe in USB debugging my phone was constantly awake.. That may be the problem?
Sent from my GT-I9300 using xda app-developers app
You can perhaps try running a battery calibration app and reset the battery stats to fix?
Coming from the s3 which I thought charged really fast. This phone seems to crawl. anyone else think the same?
Sent from my SCH-I545 using Tapatalk 2
It's the opposite if you use the supplied charger.
Sent from my SCH-I545 using xda premium
^^ what he said. 5v and 2.0amps is like double the normal chargers... 2.0amp is crazy fast... from 32% to full in just under an hour
Yup I bought an extra one on Amazon because of how slow my old charger charges it. It's like trying to charge a laptop with a phone charger haha you need the more powerful charger. My car charger claims its 1amp too but I feel like it charges super fast too.
sent from my galaxy s4
Thank you all and good to know. That's one thing I never read about. Gonna have to buy a few spares
Sent from my SCH-I545 using Tapatalk 2
travishamockery said:
Coming from the s3 which I thought charged really fast. This phone seems to crawl. anyone else think the same?
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
I have the same prob. Charged about 7% in 30 mins (using the supplied charger). Charges fine when I use my N7 charger though. I'm gonna have to check the charger when I get home.
Just for the hell of it, here is my how my charge is going right now:
7% - plugged in at 3:22
21% - 3:31
33% - 3:42
44% - 3:52
57% - 4:04
83% - 4:28
For what its worth I don't have this issue with charging - s4 charges comparable to s3 HOWEVER i am not using stock charging that came with the box, I am using cables i have had from before and sometimes even use the USB to wall plugs from Apple and/or BB or whatever I have had lying around - seems to work well.
With a 5V 2 amp charger it goes like a bat out of he'll, using my thunderbolt's 5V 1 amp charger it's quite slow.
Sent from my SCH-I545 using xda premium
i have noticed that having it plugged into either a car charger or a computer, it does NOT charge very quickly... not to the point where it is annoying but, slow enough to notice a difference...
If i take the cable from the box and plug it into my USB hub (it has it's own power source also) if im using it for much other then file transfers i can still lose power off battery. It just seems to slow the battery drain instead of just charging slower then plugged into the wall with the 5V 2amp plug. Now obviously if I'm not doing much with the phone while on the USB it will charge but much slower then the wall charging
Eric214 said:
If i take the cable from the box and plug it into my USB hub (it has it's own power source also) if im using it for much other then file transfers i can still lose power off battery. It just seems to slow the battery drain instead of just charging slower then plugged into the wall with the 5V 2amp plug. Now obviously if I'm not doing much with the phone while on the USB it will charge but much slower then the wall charging
Click to expand...
Click to collapse
That's to be expected when plugged into a source that's limited to 500 mA.
Sent from my SCH-I545 using Tapatalk 4 Beta
---------- Post added at 07:52 PM ---------- Previous post was at 07:49 PM ----------
vue said:
For what its worth I don't have this issue with charging - s4 charges comparable to s3 HOWEVER i am not using stock charging that came with the box, I am using cables i have had from before and sometimes even use the USB to wall plugs from Apple and/or BB or whatever I have had lying around - seems to work well.
Click to expand...
Click to collapse
Bear in mind that the phone will charge faster using the stock cable than it will with other cables.
Sent from my SCH-I545 using Tapatalk 4 Beta
My s4 flies on the charger.
Sent from my SCH-I545 using xda premium
Same here...on stock charger my phone charges v3ry quickly. Are you rooted with special ROM? Are you using non samsung charger?
Sent from my SCH-I545 using Tapatalk 2
Ok, there's something else going on here. Maybe its software related.
My S4 will only charge fast on the supplied charger. The cable doesn't seem to matter; I tested a bunch of them. I have an assortment of other 2A chargers and none do better then barely keeping up with power useage; hardly any charging at all. Again, the usb cord doesn't seem to make any difference.
Now, I've read mention of a "fast charge" feature that the kernel developers are "turning on". I haven't found a good explanation of what exactly that means but it appears to me that Samsung tried to make the device only charge at the full rate using their chargers and at a minimal trickle charge rate for all others even if they are capable of the full 2A output.
Then there is the problem of buying extra Samsung chargers since there appear to be a lot of knock-offs that will not get the phone to charge at full rate.
What a stupid thing to be such a PITA.
Anyone have any solid info on this?
just about every samsumg device either needs a kernel hack or an adapter to get fast charge off of a non-samsung charger. you can grab a few of these:
http://dx.com/p/usb-data-charging-extension-cable-for-samsung-p1000-black-91141
and use them with just about any 2amp charger with no problems on my old galaxy tablets or my galaxy note and nexus getting fast charge(nexus even charges faster on the 2amp - hope i don't blow it up!).
Fast charge from my understanding is just turning off the data connection when plugged into a computer. This allows for higher usb charge rates, it also helps certain wireless charging setups. I am coming from a gnex where this was the terminology, I assume it's similar. Fast charge shouldn't do much for you if you are having trouble with 2amp chargers, but maybe in this case Samsung limits through put when it doesn't recognize the charging unit? If fast charge tweaks somehow disable this, then I guess it's possible you would enjoy increase in charge rate though I have no verification on that.
Sent from my SCH-I545 using Tapatalk 2
Well, I have to discount my own theory. I have some off-brand adapter and cable to charge in my car that works great.
I sure would like to know what's going on with the chargers in my house.
kdo23 said:
Fast charge from my understanding is just turning off the data connection when plugged into a computer. This allows for higher usb charge rates, it also helps certain wireless charging setups. I am coming from a gnex where this was the terminology, I assume it's similar. Fast charge shouldn't do much for you if you are having trouble with 2amp chargers, but maybe in this case Samsung limits through put when it doesn't recognize the charging unit? If fast charge tweaks somehow disable this, then I guess it's possible you would enjoy increase in charge rate though I have no verification on that.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
There's a problem with semantics going on. Fast charge is exactly what you're used to it being on the GN. What's being referenced here is quick charge, a feature of later Snapdragon SoC's.
Sent from my Nexus 7 using Tapatalk HD
fast charging is rapid charge where near full power is transferred. in the gn2, gnote 10.1, gnex, and gtab10.1 the max i got was ~1600mA with all my 2.1A chargers including the samsung charger. the rapid charge continues to 90% and then switches to trickle - anywhere from 400-900mA til 100%. without the adapter you're stuck at trickle, even at under 90%. some chargers seem to have it built in to rapid charge,but most don't.
i've never gotten a full 2100mA from any charger yet.
you can find schematics on how to build your own adapter in one of these samsung boards. i think there was a very detailed one in the gnote10.1 forum.