Related
Hey, I am trying to find the reg key that controls the the external display timeout, I know you can set it in the settings to 5, 10, 15, 30 seconds, but I am trying to figure out which reg key controls it. thanks
[HKEY_LOCAL_MACHINE\Software\HTC\SecondaryDsp]
"DisplayTimeout"=dword
Erofich said:
[HKEY_LOCAL_MACHINE\Software\HTC\SecondaryDsp]
"DisplayTimeout"=dword
Click to expand...
Click to collapse
Is there any number (or other) to put there to have a display timeout longer than 30 sec?
...10 minutes for example...I know that involves battery consuming but I (and my friends) like startreck external clock when I put my phone on the table...moreover there my phone is usually charging...
Some weeks ago I tried with no success...
thanks
same boat here, I can't get it to stay on any longer than 30 sec.
timeouts
it seems that the reg values of 2=5 sec, 3=10 sec, 4=15 sec and 5=30 sec, however no other numbers have a timed value, it must be referencing a dll file, but I am not sure which one, I will res hack some and see if I can find it.
"DisplayTimeout"=dword:00000002 - 5 sec
"DisplayTimeout"=dword:00000003 - 10 sec
"DisplayTimeout"=dword:00000004 - 15 sec
"DisplayTimeout"=dword:00000005 - 30 sec
try to set dword:6
Erofich said:
"DisplayTimeout"=dword:00000002 - 5 sec
"DisplayTimeout"=dword:00000003 - 10 sec
"DisplayTimeout"=dword:00000004 - 15 sec
"DisplayTimeout"=dword:00000005 - 30 sec
try to set dword:6
Click to expand...
Click to collapse
Unless we did something wrong, we tried it. It does not work
displaytimeout
Erofich,
it my be my device but the reg key for the display timeout only allows for a 0 through whatever number option, it does not show the 00000001 (etc.) values.
I tried to create a new dword key, but it does the same, only gives the option to enter the 0 through whatever number, is there a way to assign the 00000006 value to a dword 6?
01-09-01 pm NEW release ENU 2.0F RELEASE
Strongly recommended update and read below
All Langugaes could Update（EXCLUDING 0804)
But Only 0409/0404/0419 hidden the windows of incoming call notify.
ChangeLog:
1.Fixed little bug of 2.0e
2.using KBD HOOK instead of enablekeybbd,it disable kbd from low level.
NOTE:YOU CAN'T INSTALL IT WITH APP WHICH USED HOOK.
SUCH AS AE Button Plus.THERE IS ONLY ONE HOOK IN WINCE 5.
I THINK 2.0F EATEN MORE POWER THAN 2.0E
01-03-01 pm NEW release ENU 2.0E RELEASE
ChangeLog:
1.Fixed a dead lock bug with blocklist thread.it will produce strange problems
2.Add a new function. disconnect DATA connection (GPRS/EDGE/3G).
;;Code by UNICODE
;;one exe(process name) one line and at the end of the file make a enter.
;;e.g.
;;
;;
;; ;in front of a line means disable it
;; "/r/n" means a ENTER .Please do not input it
;; # means when all processes marked with # exit,disconnect the DATA connection.(GPRS/EDGE/3G)
;; NOTE:If DATA connection are created by other process (NOT marked by # or even not in the list below),
;; while no process marked with # running when all processes marked with # exit,nothing happen
;;
;; XXX.EXE/r/n Right format Enable it
;; XXX X.EXE/r/n Right format Ignore the spaces in front of a line.
;; XXX.EXE /r/n Wrong format Do not ignore the space int the end of a line
;; XXX.EXE ;YYY.EXE/r/n Wrong format ;Should be in front of a line.
;; ;XXX.EXE/r/n Right format Disable it
;; XXXX.EXE Wrong format There must be a ENTER in the end of last line.
;; #XXX.EXE/r/n Right format Enable it
;; # XXX.EXE/r/n Wrong format Do not ignore the space between # and XXX.EXE
;; #XXX.EXE/r/n Right format Ignore the spaces in front of a line.
;; #XXX.EXE /r/n Wrong format Do not ignore the space int the end of a line
;; ;#XXX.EXE/r/n Right format Disable it
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;NOTE:Case Sensitive
Explorer.exe
#UCWEB.exe
pword.exe
solitare.exe
#KingDom.exe
Click to expand...
Click to collapse
edit it and reboot then setting work.
you can find it in Windows
Please edit it with PC make sure it code by UNICODE
01-01-01am NEW release ENU 2.0D RELEASE
Strongly recommended update and read below
ChangeLog:
Fiexd a serious bug of 2.0C
lock fails
serious bugs
stop 10 hours
Im sorry Please uninstall 2.0C and waiting for new
09-12-31am NEW release ENU
Strongly recommended update and read below
This app depends on OEM driver.Maybe some oem drivers is different .The Microsoft just give a suggest .so if it works abnormally. I m sorry.
2.0C is same as 2.0B just add a reg value named Enable .
So it will not hang on OS without new styple lock, If 2.0B work will you donot need 2.0c
Many device do not implement boot message So abolish lock on boot.
there is no enough information to distinguish 6.1 and 6.5 ,So if your rom is 6.5 ,check new WM 6.5 lock .The default is uncheck it.
09-12-31am NEW release ENU
2.0B
Changelog:
1.Add option disable hardkeyboard when call connected
2.Add option blink LED when CALL connected or GPRS/EDGE/3G connected
3.Fixed some bugs of 2.0A
4.More robust.
5.Do not sign with MS SDK cert.cab
sign version will release tomorrow.it is same as today but sign.
I hope many people test it without sign.And report below.
(JUST FOR TESTING)
how to fixed device donot dim
HKLM\\SYSTEM\\CurrentControlSet\\Control\\Power\\State\\BacklightOff
bkl1:
4 or 2
09-12-28pm NEW release ENU
Strongly recommended update and read below.
All Langugaes could Update（EXCLUDING 0804)
But Only 0409/0404/0419 hidden the windows of incoming call notify.
[/COLOR]
For some bugs of uninstall app ,Please uninstall 1.9X then reboot then install
2.0A
ChangeLog:
1. Optimize some code .
COLOR="Red"]2. Add BlockProcessList.txt . one or more apps run which is in the list .when device dim ,it doesn't lock .edit it and reboot then setting work.
you can find it in Windows
Please edit it with PC make sure it code by UNICODE
[/COLOR]
3. fixed some bugs of 1.9 series.
09-12-24am NEW release ENU
Strongly recommended update and read below
Only 0409 can update other language please do not update.
Other language OS will find notify window in a while.
christmas version
Uninstall old
option:reboot
Install new
Change log：
1. Add lock sound。
How to replace sound yourself.
uncheck Enable sound and OK.
rename sound file to unlock.wav or lock.wav
copy them to window over write old one.check enable sound and ok.
just support wav format. it better no longer than 3 seconds.
2. fixed a faults. check incall lock , when a call coming ,a call coming notify windows will show by OS.It doesn't show again now.it 's related to language of OS .
（ language of OS: 0409.0404) has fixed.
For fix a bug when a call incoming ,show a notify window .show .
I need it 's name with different language.
for example
0804
电话 - 拨入
0409
Phone - Incoming
I need :
other languages. and language code: e.g 0804
09-12-20am NEW 1.9A release ENU
Strongly recommended update and read below
Maybe no body online on 12/25 so....release early.
Change:
1.add setup.dll to cab. it works after install without reboot.also uninstall it stop work without reboot.Delete all file and reg very clear.
But if you install any old one you'd better make a hard-rest .
2. separate lock trigger and stand-by. there are no relationship between them.
3.add delay time .it start from screen lock app run. but it work just you check lock and then stand-by
4.add energy optimization. Check it the stand-by means that suspend without call connecting and USER_IDLE with call connecting.
. But every app stop run.So be careful with checking it.e.g:if alarm ring ,it wake up device, but when it suspend ,alarm stop and silence.Uncheck it ,Stand-by means SYS_IDLE without call connecting, USER_IDLE with call connecting.
5.Separate ms sign 。So if it do not works please install cert.cab and reboot..
6. Fix all exist bugy.
09-12-17am NEW 1.8G release WWE
fixed:better exactly 5 seconds than 1.8F
debug: when ac on, screen still turn off one time.
some time screen off but no lock
when call disconnected, it doesnt lock within 5 seconds.
this is last one of 1.8
So you can make rom with it now.
next version . add a new option suspend time so you can set
not just 5 seconds.
09-12-16am NEW 1.8F release WWE
add a new option when on AC it still works.OR uncheck it .when on AC it unlock（in call or call lock still work)
debug: when ON AC,it do not dim if you check dim trigger lock
wake up while it lock,it do not suspend with 5 seconds for some device.
For some device ,,it do not dim if you check dim trigger lock .If you find this bug, please do a hard reset then install new cab.
fixed: when a call come or out a call ,old lock do not lock ,but HW key still lock.
09-12-15PM
If you find the bug below that is to say the device do not send a resume and on notify when device wake up.
that is so sad.
you can try new pm.dll drivers from oem.
or waiting for a new version.
bug:when device wake up with device lock,but the screen donot turn off with 5 seconds.
how into sleep state. just make you device off for a long time and do not run any app which prevent device from sleep.
C++, NATIVE,SMALL SIZE,SMALL MEMORY,INTERRUPT ,NO PROCESS,GOOD ROBUST。。
09-12-12AM NEW 1.8e release WWE
Christmas gifts
CONTINUE DOWNLOAD
Maybe the last one version of 2009
1.The new interface is easy to understand
2.There are no Dim and Light when backlight trigger lock
3.fixed some bugs of 1.8C when press power device into unattended mode but
smartlock will make it to SYS_IDLE MODE. this will not happen again
4.Most of the code rewrite,save more power.No sleep No poll ,All are Notification and wait...fewer and fewer bug
5.Be reg callback is very slow,So when you press power button trigger the lock app,this need a little time,so if you on and off quickly you will see the app locking,don't wary about it.
PS I need Multilingual。 German Spanish Portuguese Japanese French
Is any body help me ?
If you find unlocking WM LOCK APP twice issue .(not 3d part software.)
Export [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State] of register and POST
09-12-10am NEW 1.8D release WWE
Fiexd some bug of 1.8C especially old style lock app issue.
09-12-08pm NEW 1.8C release WWE
fixed some bugs of 1.8b
if new lock is unchecked .Device doesn't lock with old lock app when out call or income call .
new：
1.when you receive a call while lock screen running.
Device will into USER_IDLE MODE NOT SYS_IDLE MODE within 5 seconds when call is connected
2 when you send a call while lock screen running.
Device will into into USER_IDLE_MODE NOT SYS_IDLE MODE even if call is not connected.
3.All the hardware key are locked . when coming a call or out a call. You can't receive or reject a call via any hardware key.If screen is off automatically within 5 seconds. (USER_IDLE) You can press any hardware key to turn screen on(INCLUDE reject or receive button.Do not warry about rejecting a call or receiving a call).You can't press power button.Because device is ON just into USER_IDLE MODE.
PSOWER MODE
ON :EVERY THING RUN WELL.
SUSPEND:EVERY THING STOP RUN BUT GSM/CDMA MODE.
USER_IDLE:SCREEN OFF AND YOU CAN TURN SCREEN ON VIA PRESS BUTTON BUT POWER BUTTON.
SYS_IDLE/SCREEN OFF MODE:SCREEN OFF AND YOU CAN ONLY TURN SCREEN ON VIA POWER BUTTON
If check out call connected lock ,when send a call beforce it connected , lock screen run be other reason when call connected.
Device still into USER_IDLE .key still lock
09-12-07pm NEW 1.8B release WWE
fix a bug of 1.8
suspend lock is same like suspend after lock.
when locking with 5 seconds .device ide.
09-12-07 NEW 1.8 release WWE
better save power and power button.
new change.
the suspend after lock if you check it.
if you start lock screen the device will into ide mode after 5 senconds(led light off,and you can't tape screen but press power button.but the program will go on.you can listen to music or make a call.If no program prevent it into suspend mode within 30seconds.The device will into suspend mode and just waiting a call,every program stop run)
)even you alway tape screen.
But if you unlock screen within 5 senconds , the device donot into ide mode.
any body understand me?
09-12-05 Next year(2010.01.01) it will be a new version.
Some new function.
The suspend time and suspend status.some program can set or reset .such as music player. video player. msn .
but the smart lock doesn't know which program set or reset .So new version have a program list.
you can chose it work or not work when some program run.
The new version can
I m sorry for stopping development and for my pool english
It will be continue.....
Hey here's a good summary, pictures, and features list for little program.
Thank ace10134 for providing.
http://thewingster.com/autolockscreen.aspx
PS: This app depends on OEM driver.Maybe some oem drivers is different .The Microsoft just give a suggest .so if it Doenst work I m sorry.
YOU CAN FIND LINKS IN MENU-SYSTEM
CHS-SMARLOCK
email to me.
thinks for donate:
sleuth255
support my work
This works excellent! I'll have to use this in conjunction with CSDEVCTRL to get in call locking though.
Edit: The in-call locking feature has been added! Thanks!
I'm gonna give it a shot. I really needed this.
Thanks.
upupup~downdowndown
could be great ! but even better in english, cause now, I've only squares ^^
can you describes the 3 lines, and the 2 soft buttons ?
Thanks
lpaso said:
could be great ! but even better in english, cause now, I've only squares ^^
can you describes the 3 lines, and the 2 soft buttons ?
Thanks
Click to expand...
Click to collapse
english.is any body give me a discription.? so I could complie a english version
3 when back light off .it locks
left buttons :yes
right :help->about
OK :yes
biosxjj said:
english.is any body give me a discription.? so I could complie a english version
3 when back light off .it locks
left buttons :yes
right :help->about
OK :yes
Click to expand...
Click to collapse
I have :
First line (checkbox) : WM6.5 ... ?
Second line (checkbox) : ?
Third line (checkbox) : ?
Can you tell us what is written on these 3 lines ?
Thank you
1 WM 6.5 use new lockscreen . gray when in wm6.1 or older
2 lockscreen when startup
3 lockscreen when suspend or back light off
Great !
Works really fine. Great soft
Change it to WWE
Hopefully the TS wont be mad at me
I have change it to display in English
Menu are as mentioned in the thread
cheers
Not working on Touch HD. It locks the screen using the old screen lock
gbjack said:
Not working on Touch HD. It locks the screen using the old screen lock
Click to expand...
Click to collapse
which version of your windows mobile .
you must check the first checkbox . if you want to use new screen lock with wm 6.5
upupup..
Hey, I might be a dummy but ... how do I access options?
HKLM Software\\Microsoft\\Shell\\LockScreen.
key dword value suspend =1 .lock when suspend
AutoRun =1 lock when startup
if you don't setup frequently you can
convert cab to oem
copy dll to windows
import the reg and reboot ..
it will work also.
Would be great if U could add into Your software ... to turn off screen after 5 sec when locked because now screen is on for too long. And battery is drain in this moment until it goes off. ... F.ex. to see the "time" for a sec and than screen goes off Then it would be the best apllication i`ve ever seen ! Simply and usefull !
The time you can set in setup- system-back light or setup-system-power
but there is no time to set up WHEN LOCKED ... I dont want to turn off screen after 10 sec (because it is minimal in there) because f,ex. when i`m using Opera and read any thread i don`t want to turn off screen in so short time. I just want to off it WHEN LOCKED
you means lock device but screen is on?
I mean ... step by step: Turn off device by POWER button. And when i want to check the TIME i turn device on and device goes lock (and that is great) but screen is ON for a long time ... i don`t want to use POWER button to turn it off again. I want to go back to off automaticyally in 5 sec WHEN LOCKED. We are talking all the time in situation WHEN LOCKED
Hi, This is my first thread, I thought this may be useful for the newbies like me.
This thread is all about how you can set the screen brightness set to zero without root which may be useful in saving your battery..... (As usual , I dont take any responsibility if you brick your Phone, Although I found nothing in this trick which may do so :0 )
Here you go,
1. Download and install elixer widget from market.
2. Go to home screen , long press and add elixir 1X1 widget
3. Click on gray box having "X"
4. Scroll to "brightness toggle" and select
5. You will have a pop up saying "Level" and in the text area "auto 25 50 75 100"
6. Change 25 to 00 , make sure you have space in between digits (i.e. between 00 and 50)
7. Then select "create"
8. Now, on home screen you will have widget saying your current screen brightness.
9. Click on the widget until you have 00 after clicking. (SEE NOTE FOR TROUBLESHOOTING)
10. Thats all.
NOTE - IF YOUR SCREEN GOES BLANK AND DOES NOT WAKEUP AFTER ANY BUTTON THAN JUST LOCK (KEYPAD AND SCREEN LOCK) YOUR PHONE WITH PHYSICAL BUTTON (ON RIGHT UPPER SIDE FOR SAMSUNG GALAXY ACE) AND THEN JUST UNLOCK IT. NOW IT SHOULD BE FINE AND YOU HAVE SCREEN BRIGHTNESS SET TO 00 WITHOUT ROOT. YOU CAN SAFELY REMOVE THE ABOVE MENTIONED SOFTWARE AND WIDGET WITHOUT CHANGING YOUR SCREEN BRIGHTNESS.THIS TRICK IS CHECKED AND FOUND WORKING ON GALAXY ACE AND GALAXY SL.
CLICK THANKS IF YOU FIND THIS USEFUL.
00 = absolutely no backlight or the minimum amount of backlight permitted?
00 means
00 means minimum amount of screen light (not the absolute black out) which we cant usualy be able to set through regular settings in display menu of phone.
Why don't you just use Screen Filter?
https://market.android.com/details?id=com.haxor&feature=search_result
This app support widgets too.
Brajano95 said:
Why don't you just use Screen Filter?
https://market.android.com/details?id=com.haxor&feature=search_result
This app support widgets too.
Click to expand...
Click to collapse
If you're working in the dark, this hardware setting saves battery. Screen filter won't help save battery. You could have your hardware brightness to maximum but screen filter very low and it still drains a lot because that's how LCD works.
When I was using screen filter battery drain was a lot lower.
Yes, I agree with consegregate, with setting brightness set to ZERO we can save battery and that to without any application running in background for it as it is mearly a hardware setting. So no background application means less RAM consuption, less drain of battery as compared to screen filter.
is it possible to get a lower brightness than the lowest brightness on setting?
wizdomfellas said:
is it possible to get a lower brightness than the lowest brightness on setting?
Click to expand...
Click to collapse
With above steps , you may get the brightness to zero, this level is the brightness which you can not usually achieve through regular display menu in the phone settings. But lower than zero is not possible with my above method.
I know this thread is repeated everywhere, but I thought I'd start it up for our GNote forums
What are your Tasker profiles? I just found out how to use Tasker yesterday and I find myself loving it.
Mine are as follows:
1) Incoming Calls - Decrease volume to second lowest setting (I have loud friends)
2) Turn wifi on at home automatically
3) Open PowerAmp when headphones are plugged in
4) Send a "Happy Birthday!" text to various people on their birthdays.
5) Alert me when battery is full to 100%. Really useful if you don't want to overcharge your battery.
What about you guys?
Mute at work locations
Pandora + Bluetooth in car
Wifi at home
100% Battery alert
Auto-off unpaired Bluetooth
Regulated auto-sync based on battery
Long-press search changed to notification drawer open
Screen timeout change for various apps
Data off and screen timeout change for ad-supported games
I posted a couple just recently in this thread...
http://forum.xda-developers.com/showpost.php?p=23151996&postcount=25
Here's a C&P for the lazy....
______________________________________________
Car Profile
Enter Task
1) Disable PIN Security so I don't need to unlock my phone while in the car (one less distraction)
2) Set Media Volume to 15
3) Turn Wifi off
4) Change Display timeout to 30 minutes (nice for google maps and viewing the album art of the streaming music)
5) Turn on GPS IF power is connected to phone
6) Start recording video with DailyRoads Voyager ( A car DVR program in case of an accident so you then have Objective evidence)
7) Play the THX sound after a couple seconds to make sure the Bluetooth audio streaming is working right
Car EXIT task
1) Stop Recording Video for DailyRoads Voyager (DRV)
2) Wait 5 seconds
3) Kill App - DRV
4) Perform Task - PIN ON
5) Secure Settings - Disable GPS
6) Display Timeout - 2 min
7) WiFi - Turn ON
8) Bluetooth - Off
9) Display Brightness - Set to 150 out of 255
Other fun stuff
Home VAR %STATUS_HOME
Set VAR for when I am near my home micro-cell as the signal radius is small and specific to my house. I use this since the phone part is always on and I don't need to use GPS to determine location which uses more juice. That VAR is then used to turn on wifi when I arrive at home, disable PIN again, Flash "Welcome home", set WiFi sleep to Never. The Exit task for when I leave home turns PIN ON and sets the WiFi sleep policy to Never While Plugged"
Power VAR %STATUS_POWER
I have 2 seperate profiles for when I am connected to AC or USB power. The AC one sets the power VAR to 2 while the USB one sets it to 1. Both are used for other tasks and profiles, like the car one above requires AC connection so my GPS doesn't drain my battery even while connected. I have it flash "AC connected" or "USB connected" to let me know if the phone is receiving the correct amount of juice. When both of them exit they set the Power VAR to 0 and flash "Power Disconnected"
Sleepy Time
Profile conditions
1) Time - From 00:01 to 06:30
2) State - Home VAR = 1 (so this doesn't happen when I am out and about somewhere at night)
Enter Task - In case I'm tinkering with the phone in bed and don't want to keep the wifey up with a blazing screen and vibrations when clicking buttons. Also prevents annoying sounds at night by disabling data sync and muting all but the Alarm audio.
1) AutoSync -OFF
2) Flash "Good night"
3) Display brightness at 0
4) Screen Filter set to 25%
5) Perform Task - Alarm Audio only
Alarm Audio only task above
1) Alarm Volume - 4
2) Flash "Alarm Audio Only"
3) Haptic Feedback - Off
4) Notification Volume - 0
5) Ringer volume - 0
6) System volume - 0
7) Media volume - 0
Exit Task
1) AutoSync - On
2) Display Brightness - 255
3) Screen Filter - 100%
Quick Stats - This has two parts. One is the Notification that tells me a bunch of info I like to know like Battery level, Screen timeout, screen brightness and CPU govenor. The second part is launching a menu whe nI click on the the notification that has the commonly used Screen brightness & timeouts I use. I need to add some audio options in there too. I re-discovered that menu was there the entire time and didn't see the + button add more items to the menu. Iwas over complicating it by trying to use Scenes as a pop-up menu. Still need to learn more about Scenes.
Part 1 - Quick Stats Notification
State - Orientation Face Up (I use this state so if I want to refresh the stats all I do put the phone face up. There is automatically a time stamp so I can know when the stats were last updated)
Task - Notify Quick Stats
1) Notify - with Battery level, Screen timeout, screen brightness and CPU govenor variables as the text.
Part 2 - Notification Bar Tool
Event - Notification Click
Task - Quick Stats Menu
1) Menu with options for display brightness at 0, 100 or 255. Display timeout options for 30 secs, 2 min, 10 min and 30 min
Remote PIN Disable - This is for in case I forget my pin this will disable the PIN likew used in the Car and Home profiles. It is triggered by receiving a text from certain people with a specific phrase.
Event - Text with specific phrase under Content
Task - PIN OFF
Where Are You - Here's a 3 part setup. If I can't find my phone I again send a text with a specific phrase that then cranks up all volume settings to MAX and repeat "The Most Annoying Sound in the world" by Jim Carrey from Dumb & Dumber. The text sets a VAR called %SHUTUP to 1. When %SHUTUP = 1 it triggers Part 2. Once I find the phone to set the VAR back to 0 I shake the phone.
Part 1 - Where Are You Status
Event - Received Text with specific phrase
Task - Variable Set - %SHUTUP = 1
Part 2 - Where Are You Status
State - Variable Value = 1
Task - Where Are You Audio
1) Perform Task - Crank It Up (sets all volumes to MAX)
2) Flash - "I'm over here!"
3) Music Play - Annoy.wav
4) Wait - 15 sec
5) Goto - Top of Loop IF %SHUTUP = 1
Part 3 -Shutup Shake
Event - Shake
Task
1) Variable Set - %SHUTUP = 0
2) Flash "SHUT UP!!!"
A couple more but they are straight from the Tasker Wiki
I'm definitely going to have to do those. Right now, all I understand is the basics of Tasker (no where near Variables) but I'll follow your instructions.
Thanks especially for "Where are you"
A few I use....
1). Pocket Lock - Detects when phone is upside down in my pocket and activates WidgetLocker.
2). Read Caller Aloud - Incoming caller name said aloud so I can decide whether I want to answer without looking at my phone.
3). Night Mode - From 00:00 to 06:00 Puts phone into silent mode, plus checks whether Wifi, Data, GPS, or Blutooth are on, and turns them off if they are.
4). Battery Low - When battery gets to 15%, and it's not connected to a charger, Says "Battery low, connect charger" and turns off Wifi, BT, Data, GPS.
5). Music Player - When headset is plugged in, loads music app.
6). Home - Gets general location from cell tower, activates Wifi, disables Data & GPS. Exit Task disables Wifi, and enables Data.
7). Work - Gets general location from cell tower, disables Wifi, Data, GPS, BT, and Auto Replies to sms that im working and will reply when i can.
I'm pretty new to tasker, but have been pretty bored lately and have been working on an addition to my Work profile.
This profile will, use variables to save up to 5 peoples numbers and how many times each has txted me, and txt each of them back, using their names from my contact list in the body of each txt.
So lets say BOB txts me once, his number will be added as a variable, and it will begin counting the txts from him. On the first txt he is send a txt saying, something like. "Sorry BOB, im at work, will reply when i can".
Then DAVE txts, he will be assigned to Sender2, and have a txt sent to him like above, with the second Counter and Number (%CNTR2 and %SNDR2).
BOB, realizing it's an auto-reply, decides to be funny and spam txt me, thinking he will get a reply every time. However, tasker counts his incoming txts, (%CNTR1) and when it reaches a value of 10, send just one more txt saying something like (Thats 10 txts you've sent, seems Im still unavailable).
Profile: Auto Reply
Variables:
%SNDR1 <---- BOBs cell number
%SNDR2 <---- DAVEs cell number
%SNDR3
%SNDR4
%SNDR5
%CNTR1 <---- BOBs txt counter
%CNTR2
%CNTR3
%CNTR4
%CNTR5
%TXTVAR <---- Counter determining whether a txt received is from someone new or a number already saved.
Enter Task:
Code:
1). GoTo label Sender1 if %SMSRF ~ %SNDR1
2). GoTo label Sender2 if %SMSRF ~ %SNDR2
3). " " etc.
4).......
5).....
6). If (%SNDR1 ~ 0) then SetVariable %SNDR1 to %SMSRF
7). If (%SNDR2 ~ 0) and (%TXTVAR = 1) then SetVariable %SNDR2 to %SMSRF
8). If (%SNDR3 ~ 0) and (%TXTVAR = 2) then SetVariable %SNDR3 to %SMSRF
9)........etc.
10).
11). If (%SMSRF ~ %SNDR1) <-------- Label Sender1
Variable Add (%CNTR1 + 1)
If (%CNTR1 = 1)
Send SMS (Tells this person eg. BOB I'm at work)
Variable Add (%TXTVAR + 1)
Else If (%CNTR1 = 10)
Send SMS to %SNDR1 (Thats 10 txts you've sent me)
Endif x2
12). If (%SMSRF ~ %SNDR2) <-------- Label Sender2
Variable Add (%CNTR2 + 1)
If (%CNTR2 = 1)
Send SMS (Tells this person eg. DAVE I'm at work)
Variable Add (%TXTVAR + 1)
Else If (%CNTR2 = 10)
Send SMS to %SNDR2 (Thats 10 txts you've sent me)
Endif x2
13). If (%SMSRF ~ %SNDR3) <-------- Label Sender3
Variable Add (%CNTR3 + 1)
If (%CNTR3 = 1)
Send SMS (Tells this person eg. EMILY I'm at work)
Variable Add (%TXTVAR + 1)
Else If (%CNTR3 = 10)
Send SMS to %SNDR3 (Thats 10 txts you've sent me)
Endif x2
14). ......Etc.
15). ......
I'm still working on it, deciding whether to have the variables reset as they are all filled, 1 at a time, or to make them reset every hour or so. Also whether to make another profile purely for resetting those variables, or add them to this task. Bearing in mind that on my phone it gets rather annoying to manage/edit the task since its currently at 78 lines long.
As I said I was bored.
If anyone is interested in this I can post a backup xml of this somewhere.
TriggerSpasm said:
BOB, realizing it's an auto-reply, decides to be funny and spam txt me, thinking he will get a reply every time. However, tasker counts his incoming txts, (%CNTR1) and when it reaches a value of 10, send just one more txt saying something like (Thats 10 txts you've sent, seems Im still unavailable).
[...]
As I said I was bored.
Click to expand...
Click to collapse
Bored indeed. Anywho, look into arrays in Tasker, that'll make this tracking stuff much easier. Track all of that stuff in one array vs a bunch of different ones. Might clean up the code a little, make it easier to erm.. relieve more boredom?
khaytsus said:
Bored indeed. Anywho, look into arrays in Tasker, that'll make this tracking stuff much easier. Track all of that stuff in one array vs a bunch of different ones. Might clean up the code a little, make it easier to erm.. relieve more boredom?
Click to expand...
Click to collapse
Thanks, I certainly will.
Using Tasker http://www.pocketables.com/forum//showthread.php?t=9680
Scripted Backups using Tasker and TWRP http://www.pocketables.com/forum//showthread.php?t=11435
Beginner’s guide to Tasker http://www.pocketables.com/tag/beginners-guide-to-tasker
Tasks to:
(1) Take photos and email them when a specific text message is received
(2) Lock and password protect the phone when a specific text message is received
(2) Use different keyboards depending on the open app or screen orientation
Hi,
I am using latest CM-10.1-20140112 Nightly version with my TF201. The issue I am experiencing is after a few minutes of inactivity the keyboard dock cuts the power of the inserted SD-card (64 GB- class 10) and background processes involving the SD-card shuts down automatically . its really annoying, i.e. your are in the middle of uploading /syncing from dock SD-card to a cloud App. (I am seeing the notification : "the SD-card has been removed") and I have to unmount/ re-mount it.
Have been searching the CM settings, no useful option found. Now I am using the option "onDemand" for CPU and placed sleep-time to 10 minutes.
Thanks for any helps.
Amir