i cant select anything ! and i dont now how to fix it ! can i remove this recovery ? and replace it if so can anyone help me ? a tut or thread that maybe of assistance!
i wanna update my phone finally !
AOSP 2.3.3 rom- the latest is my goal!
use the up & down buttons on the right SIDE of your phone. select with ... I can't remember... one of the other buttons
[edit] see attached screenshot
Use camera button to select.
^ thanks it worked
Related
Hi
since i put the new rom, the 2.3.3 from samfirware, i have a problem to lock the phone, because i press the buttin on/off and the only thing that do is to shut down the display of the phone. i dont know if is because of the rom or because of some aplication that i install there.
if someone could help i would apreciate
thanks and greatting from Portugal
have you tried reflashing the rom, as the error might be bcoz of the rom not being flashed properly.
vlc_marcos said:
Hi
since i put the new rom, the 2.3.3 from samfirware, i have a problem to lock the phone, because i press the buttin on/off and the only thing that do is to shut down the display of the phone. i dont know if is because of the rom or because of some aplication that i install there.
if someone could help i would apreciate
thanks and greatting from Portugal
Click to expand...
Click to collapse
Check the settings for the lock screen option.
if that doesnt work then reflash the rom it might not have been properly flashed
hit thanks if helped
Hello everyone !
Sorry for my bad english
I just bough my Galaxy Tab 10.1 , and after about 5 hours been using it , the Screen doesn't respond anymore , i already Re-start the Tab and also try a recovery to Swipe all my data back to Zero , but no luck , My tab stuck on the main screen and can't unlock the Main menu , can someone help me Please ?
Thank You In Advance .
Press and hold Power + Volume Down until you see the Robot.
Release the buttons immediately you the Robot, then press Volume Down to move the flashing cursor to CWM mode (box with arrow).
Press Volume Up to select the mode and do a complete wipe.
Hello yqed and thank for your help .
I already did that and still have the issue , stuck on the Main Screen and cannot go foward , No respond at all , but i can feel the vibration , but do you have another solution ?
Thanks !
What do you mean Main Screen... can you swipe the circle, or you have a PIN setup and cannot enter it because the tablet does not respond?
Did you do anything to the tablet, ROM install through Odin, rooting, TouchWiz update, etc?
Hi !
Yes , i cannot Swipe the circle , i didn't do anything in particular before the issue , but flash the Tab to see if it's gonna solve the problem with the Stock Rom [ EUR ] , from this -> Thread <- , but no luck till now , the rotation working also .
You have this issue. This was my reply. I know is not funny for you but, I laughed when I saw the video... I hope you did not dropped the tablet into your toiled bowl.
Anyways, this is a good place to look for the issue. Did you played with the kernel or rooted the tablet? Or it was a bone stock when this occurred... Did you updated to TouchWiz using Kies?
Hi !
No , i didn't do anything to the Tab , just left it for about 30 min , when i came back the Screen doesn't respond anymore , i already saw the Youtube videos , i guess the only solution is to send back My Tablet , Thank for your help
i'm a noob at rooting and stuff but so as to use the WLAN in my university i rooted my device and couldn't bear the excitement and tried installing a custom ROM ( Why did i do this :'( ) then after installation the soft buttons namely the home button, menu button , and back button stopped responding :'(
I tried many things like factory resetting and using odin to install stock kernel. but nothings working. i'm exhausted ( spent 19 hours on this ). finally decided to post here for help :\
Plz help me :'(
OK man welcome to the real world of flashing android so your problem is very common and easy to fix ...
There is a zip that you install and it makes those buttons work again
I would give you it but im on my computer and its on my tablet so please gives me a hour or two and I'll post it here for you
Sent from my YP-G70 using xda premium
Your in luck
ok man after abit of looking around i found it on my computer so just install this zip like you would install any other zip on your player
but before you install this
Is your player a samsung galaxy wifi 5.0? if not then DO NOT use this zip but if it is go ahead
ToORAGe said:
i'm a noob at rooting and stuff but so as to use the WLAN in my university i rooted my device and couldn't bear the excitement and tried installing a custom ROM ( Why did i do this :'( ) then after installation the soft buttons namely the home button, menu button , and back button stopped responding :'(
I tried many things like factory resetting and using odin to install stock kernel. but nothings working. i'm exhausted ( spent 19 hours on this ). finally decided to post here for help :\
Plz help me :'(
Click to expand...
Click to collapse
What ROM? Gingerbread, ICS or Jellybean? USA(capacitive home button) or INTL(physical home) 3.6, 4.0, 4.2, 5.0???
Sent From my USA Galaxy Player 5.0
hi this is the only place where i could find some help so i want to ask ....i rooted my phone .....i did clockworkmod recovery ......i wanted to install android kitkat by cyanokat ...and ...i followed every steps correctly while flashing new rom ... but at last.... while the process was going to end ....i without of knowledge took of the battery ......then then i pressed the power key the bootloader is blank and with vol- and power keys i could access only fastboot screen..... i am so worrying about it ...and need a way i could reset it to stock rom ....... .....guys i dont know what to do next i googled many things to reset but none helped ..... you are my last hope guys ....pls help...any little help is my pleasure
sachin mensi said:
hi this is the only place where i could find some help so i want to ask ....i rooted my phone .....i did clockworkmod recovery ......i wanted to install android kitkat by cyanokat ...and ...i followed every steps correctly while flashing new rom ... but at last.... while the process was going to end ....i without of knowledge took of the battery ......then then i pressed the power key the bootloader is blank and with vol- and power keys i could access only fastboot screen..... i am so worrying about it ...and need a way i could reset it to stock rom ....... .....guys i dont know what to do next i googled many things to reset but none helped ..... you are my last hope guys ....pls help...any little help is my pleasure
Click to expand...
Click to collapse
do you have the stock backup? if you do then you could flash the files via fastboot. else, just use SP flash tool
While trying to update Kernel recovery version TWRP from the G925 to the G920, the update completed successfully, but when the device booted I noticed that the touch pad was working in reverse.
When I touch one side the opposite side responds.
All of my attemps to restore the decive to original ROM with PIT were successful, but the touch pad is still working in reverse.
Please, can someone help me, is there any hidden menu or option that can calibrate the screen/touchpad back to nomal ?
SHATTAH said:
While trying to update Kernel recovery version TWRP from the G925 to the G920, the update completed successfully, but when the device booted I noticed that the touch pad was working in reverse.
When I touch one side the opposite side responds.
All of my attemps to restore the decive to original ROM with PIT were successful, but the touch pad is still working in reverse.
Please, can someone help me, is there any hidden menu or option that can calibrate the screen/touchpad back to nomal ?
Click to expand...
Click to collapse
Can you please update us what you did to fix it?
Where did you found PIT files for S6.
Thank you.
@SHATTAH
have you try :
1: if you can save all your data , because all will be deleted after( 2 and 3 )
2: factory reset with the keyboard dial : *#87976633# and reboot your phone
3: recovery mode for wiping cache partition and data/factory reset http://wgnszoz9s1.1fichier.com/
regards
fix
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Can you plase add I pic...
Did you still have to Flash STOCK rom+Factoy reset or only the code...?
Thanks :good:
This is the screen shot you ask...
had same problem with my newly bought s6 within 2 days after putting custom rom , immediately i went to samsung service centre , as the device is just two days old, they replaced the device with new one., Even after i had Knox warrenty void:1
-JFK- said:
This is the screen shot you ask...
Click to expand...
Click to collapse
Thanks Alot,
Your are A Guy of Great Clever. I will ever Thanks to You.
Thanks A lot Sir......
SHATTAH said:
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Click to expand...
Click to collapse
Thank you so much!
SHATTAH said:
While trying to update Kernel recovery version TWRP from the G925 to the G920, the update completed successfully, but when the device booted I noticed that the touch pad was working in reverse.
When I touch one side the opposite side responds.
All of my attemps to restore the decive to original ROM with PIT were successful, but the touch pad is still working in reverse.
Please, can someone help me, is there any hidden menu or option that can calibrate the screen/touchpad back to nomal ?
Click to expand...
Click to collapse
Hi Shattah.
Do you remember the which version of TWRP of the G925 (edge) did you use on the G920 (flat)? Was it the chinese, the t-mobile, or some other? Trying to install TWrp on my s6 g920i flat (demo unit) and no luck so far. Please let me know and I'll try that trick. Cheers.
is that command supposesed to work with default os that comes with the s6 edge. U went in the phone field and pasted the code where my phone reponded by telling me I was dialing a wrong number.
Thanks
SHATTAH said:
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Click to expand...
Click to collapse
thanks mybro.. :* :*
SHATTAH said:
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Click to expand...
Click to collapse
thank you a lot, you saved my phone