While trying to update Kernel recovery version TWRP from the G925 to the G920, the update completed successfully, but when the device booted I noticed that the touch pad was working in reverse.
When I touch one side the opposite side responds.
All of my attemps to restore the decive to original ROM with PIT were successful, but the touch pad is still working in reverse.
Please, can someone help me, is there any hidden menu or option that can calibrate the screen/touchpad back to nomal ?
SHATTAH said:
While trying to update Kernel recovery version TWRP from the G925 to the G920, the update completed successfully, but when the device booted I noticed that the touch pad was working in reverse.
When I touch one side the opposite side responds.
All of my attemps to restore the decive to original ROM with PIT were successful, but the touch pad is still working in reverse.
Please, can someone help me, is there any hidden menu or option that can calibrate the screen/touchpad back to nomal ?
Click to expand...
Click to collapse
Can you please update us what you did to fix it?
Where did you found PIT files for S6.
Thank you.
@SHATTAH
have you try :
1: if you can save all your data , because all will be deleted after( 2 and 3 )
2: factory reset with the keyboard dial : *#87976633# and reboot your phone
3: recovery mode for wiping cache partition and data/factory reset http://wgnszoz9s1.1fichier.com/
regards
fix
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Can you plase add I pic...
Did you still have to Flash STOCK rom+Factoy reset or only the code...?
Thanks :good:
This is the screen shot you ask...
had same problem with my newly bought s6 within 2 days after putting custom rom , immediately i went to samsung service centre , as the device is just two days old, they replaced the device with new one., Even after i had Knox warrenty void:1
-JFK- said:
This is the screen shot you ask...
Click to expand...
Click to collapse
Thanks Alot,
Your are A Guy of Great Clever. I will ever Thanks to You.
Thanks A lot Sir......
SHATTAH said:
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Click to expand...
Click to collapse
Thank you so much!
SHATTAH said:
While trying to update Kernel recovery version TWRP from the G925 to the G920, the update completed successfully, but when the device booted I noticed that the touch pad was working in reverse.
When I touch one side the opposite side responds.
All of my attemps to restore the decive to original ROM with PIT were successful, but the touch pad is still working in reverse.
Please, can someone help me, is there any hidden menu or option that can calibrate the screen/touchpad back to nomal ?
Click to expand...
Click to collapse
Hi Shattah.
Do you remember the which version of TWRP of the G925 (edge) did you use on the G920 (flat)? Was it the chinese, the t-mobile, or some other? Trying to install TWrp on my s6 g920i flat (demo unit) and no luck so far. Please let me know and I'll try that trick. Cheers.
is that command supposesed to work with default os that comes with the s6 edge. U went in the phone field and pasted the code where my phone reponded by telling me I was dialing a wrong number.
Thanks
SHATTAH said:
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Click to expand...
Click to collapse
thanks mybro.. :* :*
SHATTAH said:
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Click to expand...
Click to collapse
thank you a lot, you saved my phone
Related
My Samsung Tablet stops at the start up screen, choose the language then start. Does not respond to touch. I used an ODIN program. But when re-running stops at the same screen. What is the solution?
Thank you
alharbi said:
My Samsung Tablet stops at the start up screen, choose the language then start. Does not respond to touch. I used an ODIN program. But when re-running stops at the same screen. What is the solution?
Thank you
Click to expand...
Click to collapse
You need to give a lot more information if you want help. Which version of the tab do you have? What did you flash with ODIN? more info...
Samsung Galaxy Tab 10.1, the slim one. Comes with 3.1 honeycomp. I flashed it with Arabic 3.1.
Thank you for your help.
alharbi said:
Samsung Galaxy Tab 10.1, the slim one. Comes with 3.1 honeycomp. I flashed it with Arabic 3.1.
Thank you for your help.
Click to expand...
Click to collapse
Was it working out-of-the-box? Did you try to root it? give more detail about your tab software version, what steps you performed? so that people in this forum can provide some guide you.
It was working. I an not try to do root for it. The problem comes after I installed Dr. Wen Antivirus. While the programme scaning it reboot the device. But it stopped on the first screen to choose the language. No respose for the touch.
Software 3.1 - I used Odin, every thing go perfect. But when start stop on the same screen and same problem.
I dont have idea about the tab software ver. Thank you
alharbi said:
It was working. I an not try to do root for it. The problem comes after I installed Dr. Wen Antivirus. While the programme scaning it reboot the device. But it stopped on the first screen to choose the language. No respose for the touch.
Software 3.1 - I used Odin, every thing go perfect. But when start stop on the same screen and same problem.
I dont have dea about the tab software ver. Thank you
Click to expand...
Click to collapse
Maybe you have to use volume buttons to choose the language.
sent from my CM7 nokia 3210
HI.
I'm from Pakistan. i buy my Samsung Galaxy S III GT-I9300 over an year ago with factory unlock. Using Samsung Galaxy S III from over a year now. I flashed a custom ROM of android 4.2.2 after 3 to 4 days of using it it became too much buggy. sometime all app started to crash. I FLASHED it to stock ROM 4.1.2 immediately then my S3 wasn't able to make any new calls it said "not registered on network" i tried doing a factory reset but that didn't fixed the problem then i searched on the internet and got to know that my IMEI got corrupted it's something like 0049********.
My binary counter was 9.
Please help Me :
how can i fix my imei number
how can i troubleshoot not register on network error.
is there any option to change or fix my original IMEI number back ???
don't worry,
first format your phone and
flash firmware for galaxy s3
then it will automatically recovery your
imei number.:fingers-crossed:
for more information
see my forum
about ths
i'm format my Samsung Galaxy S3 Gt-I9300 Completely And Then Install Official Samsung ROM 4.1.2 But Have The Same Problem. Tell My Whats Wrong With The Device ???
Hello. We two my friends are in the same boat. i have the same problem from over 3 days and i wan't able to fix this problem. My imei is same as yours 0049 something.
I had cm 10.2 nightlies then flashed to 4.2.2 where the problems started appearing. i got panicated and flashed to stock JB rom then unrooted for a day hoping the problems will disappear but it did nothing to help.
I hope someone will actualy help us.
FIX FOUND!!
iuofs said:
Hello. We two my friends are in the same boat. i have the same problem from over 3 days and i wan't able to fix this problem. My imei is same as yours 0049 something.
I had cm 10.2 nightlies then flashed to 4.2.2 where the problems started appearing. i got panicated and flashed to stock JB rom then unrooted for a day hoping the problems will disappear but it did nothing to help.
I hope someone will actualy help us.
Click to expand...
Click to collapse
hey i had the same prob wid my gs3, nd i too tried everything possible ( almost ) including the efs backup blah blah!! backporting blah blah ablosutely nuttin worked! http://forum.xda-developers.com/images/smilies/frown.gif
went to spamsung service center n they said plz replace ur mainboard!! cost about 130$ in india!
neway
luckily today i wanted to checkout the official android 4.3 rom for sg3 and so i flashed it on to my phone using odin nd der we go!!
my imei is no longer 0049***!!!
is back to original nd i can make calls and send/receive txt msgs!!!
link to download and detailed instruction on how to flash is below!!
http://www.sammobile.com/2013/11/03...ly-bean-leaked-firmware-for-the-galaxy-s-iii/
i hope it helps you guys! cheers nd thanks everybody for all the help
FIX FOUND!!
s4sonicboy said:
HI.
I'm from Pakistan. i buy my Samsung Galaxy S III GT-I9300 over an year ago with factory unlock. Using Samsung Galaxy S III from over a year now. I flashed a custom ROM of android 4.2.2 after 3 to 4 days of using it it became too much buggy. sometime all app started to crash. I FLASHED it to stock ROM 4.1.2 immediately then my S3 wasn't able to make any new calls it said "not registered on network" i tried doing a factory reset but that didn't fixed the problem then i searched on the internet and got to know that my IMEI got corrupted it's something like 0049********.
My binary counter was 9.
Please help Me :
how can i fix my imei number
how can i troubleshoot not register on network error.
is there any option to change or fix my original IMEI number back ???
Click to expand...
Click to collapse
hey i had the same prob wid my gs3, nd i too tried everything possible ( almost ) including the efs backup blah blah!! backporting blah blah ablosutely nuttin worked!
went to spamsung service center n they said plz replace ur mainboard!! cost about 130$ in india!
neway
luckily today i wanted to checkout the official android 4.3 rom for sg3 and so i flashed it on to my phone using odin nd der we go!!
my imei is no longer 0049***!!!
is back to original nd i can make calls and send/receive txt msgs!!!
link to download and detailed instruction on how to flash is at sammobile.com!!
i hope it helps you guys! cheers nd thanks everybody for all the help
kjvikram06 said:
hey i had the same prob wid my gs3, nd i too tried everything possible ( almost ) including the efs backup blah blah!! backporting blah blah ablosutely nuttin worked!
went to spamsung service center n they said plz replace ur mainboard!! cost about 130$ in india!
neway
luckily today i wanted to checkout the official android 4.3 rom for sg3 and so i flashed it on to my phone using odin nd der we go!!
my imei is no longer 0049***!!!
is back to original nd i can make calls and send/receive txt msgs!!!
link to download and detailed instruction on how to flash is at sammobile.com!!
i hope it helps you guys! cheers nd thanks everybody for all the help
Click to expand...
Click to collapse
guys note yous might just need the MG4+ modem to recovery your network, if its not that and you dont have a backup then im afraid ANYTHING you legally do is useless...
Not registered on network
hey fellows..
i have a problem with my galaxy s3.. a month ago, i had a problem due to custom roms that i lost imei and serial number was 0000 and not registered on network.. i repaired it from the market, after few days i installed official rom from sammobile and installed it via odin. but this time, imei was ok, serial number was ok, but i got not registered on network. i tried ariza patch and got cell working again. now whenever i install official rom, this problem happens, is there any permanent solution for this? thanking you in anticipation.
daxhinghunk said:
hey fellows..
i have a problem with my galaxy s3.. a month ago, i had a problem due to custom roms that i lost imei and serial number was 0000 and not registered on network.. i repaired it from the market, after few days i installed official rom from sammobile and installed it via odin. but this time, imei was ok, serial number was ok, but i got not registered on network. i tried ariza patch and got cell working again. now whenever i install official rom, this problem happens, is there any permanent solution for this? thanking you in anticipation.
Click to expand...
Click to collapse
the same for me
Possible Solution
daxhinghunk said:
hey fellows..
i have a problem with my galaxy s3.. a month ago, i had a problem due to custom roms that i lost imei and serial number was 0000 and not registered on network.. i repaired it from the market, after few days i installed official rom from sammobile and installed it via odin. but this time, imei was ok, serial number was ok, but i got not registered on network. i tried ariza patch and got cell working again. now whenever i install official rom, this problem happens, is there any permanent solution for this? thanking you in anticipation.
Click to expand...
Click to collapse
dear I have Galaxy note 3 Sm-n900 i had the same problem this is how i fixed the problem
1. Power of your device
2- when completely of hold volume up+ home button+ power button together for few secs
3- when Samsung logo shows up release all 3 keys and it will come into recovery mode
4- first erase all user data( use volume down to navigate and power button to select)
5- erase cache/wipe cache(same procedure)
6- now reboot
when your phone will boot up it will be fixed
but remember to keep SIM Card in phone while doing this
I hope it can help you
if the problem is still there you can flash the ROM once again some times it also helps
any other help i am always there to help
Regards,
Prof. Nabeel Raza
nabeelrazanaqvi said:
dear I have Galaxy note 3 Sm-n900 i had the same problem this is how i fixed the problem
1. Power of your device
2- when completely of hold volume up+ home button+ power button together for few secs
3- when Samsung logo shows up release all 3 keys and it will come into recovery mode
4- first erase all user data( use volume down to navigate and power button to select)
5- erase cache/wipe cache(same procedure)
6- now reboot
when your phone will boot up it will be fixed
but remember to keep SIM Card in phone while doing this
I hope it can help you
if the problem is still there you can flash the ROM once again some times it also helps
any other help i am always there to help
Regards,
Prof. Nabeel Raza
Click to expand...
Click to collapse
I have the same issue as described above with my s3, ur method didnt work
solved
s4sonicboy said:
HI.
I'm from Pakistan. i buy my Samsung Galaxy S III GT-I9300 over an year ago with factory unlock. Using Samsung Galaxy S III from over a year now. I flashed a custom ROM of android 4.2.2 after 3 to 4 days of using it it became too much buggy. sometime all app started to crash. I FLASHED it to stock ROM 4.1.2 immediately then my S3 wasn't able to make any new calls it said "not registered on network" i tried doing a factory reset but that didn't fixed the problem then i searched on the internet and got to know that my IMEI got corrupted it's something like 0049********.
My binary counter was 9.
Please help Me :
how can i fix my imei number
how can i troubleshoot not register on network error.
is there any option to change or fix my original IMEI number back ???
Click to expand...
Click to collapse
update to 4.2.2
root device
google "ariza_jbv02.zip", put it on root folder and install through CWM
everything will be ok
s4sonicboy said:
HI.
I'm from Pakistan. i buy my Samsung Galaxy S III GT-I9300 over an year ago with factory unlock. Using Samsung Galaxy S III from over a year now. I flashed a custom ROM of android 4.2.2 after 3 to 4 days of using it it became too much buggy. sometime all app started to crash. I FLASHED it to stock ROM 4.1.2 immediately then my S3 wasn't able to make any new calls it said "not registered on network" i tried doing a factory reset but that didn't fixed the problem then i searched on the internet and got to know that my IMEI got corrupted it's something like 0049********.
My binary counter was 9.
Please help Me :
how can i fix my imei number
how can i troubleshoot not register on network error.
is there any option to change or fix my original IMEI number back ???
Click to expand...
Click to collapse
Brother if you are mobile phone repair professional repair imei with any supported box. If you are not a mobile phone repair professional go to a mobile phone repairing shop your problem will solve.
ricky310711 said:
guys note yous might just need the MG4+ modem to recovery your network, if its not that and you dont have a backup then im afraid ANYTHING you legally do is useless...
Click to expand...
Click to collapse
Guys this worked first time for me the other day, i baught an s3 that was ****** and got it up and running but imei/baseband was gone. Flashed MG4 modem.bin via odin and all is perfect again.
jmcclue said:
Guys this worked first time for me the other day, i baught an s3 that was ****** and got it up and running but imei/baseband was gone. Flashed MG4 modem.bin via odin and all is perfect again.
Click to expand...
Click to collapse
Hi there, how exactly do I flash the MG4 modem.bin via Odin
I would be doing this for the ATT version of the Galaxy S3 but I am encountering the same issues that the OP here is describing
I have Odin and know how to use it, just not sure where I find the MG4 modem bin file
Best Solution that works
kjvikram06 said:
hey i had the same prob wid my gs3, nd i too tried everything possible ( almost ) including the efs backup blah blah!! backporting blah blah ablosutely nuttin worked! http://forum.xda-developers.com/images/smilies/frown.gif
went to spamsung service center n they said plz replace ur mainboard!! cost about 130$ in india!
neway
luckily today i wanted to checkout the official android 4.3 rom for sg3 and so i flashed it on to my phone using odin nd der we go!!
my imei is no longer 0049***!!!
is back to original nd i can make calls and send/receive txt msgs!!!
link to download and detailed instruction on how to flash is below!!
http://www.sammobile.com/2013/11/03...ly-bean-leaked-firmware-for-the-galaxy-s-iii/
i hope it helps you guys! cheers nd thanks everybody for all the help
Click to expand...
Click to collapse
I agree with you on this and I've done it myself and it works 110%. So if any of u guys out there are facing the same problem, don't waste your money on sending your phone to the service center, they'll just eat up your money and your time.....instead just follow the steps and I can bet u it'll solve your problems. I have rooted my Samsung S3 from Android 4.1.2 to 4.2.2 to 4.3 and then downgraded it back to 4.1.2 which only then I encountered the problem of "Not Registered on Network". But then, after going through various forums and lastly your article, I decided to try it out myself and it works beautifully without any hiccups.
Prior to doing anything on your phone, u have to download Odin3 v.3.09 and after that, make sure u download the following firmware:-
a) AP_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 file
b) BL_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 file
c) MODEM_I9300BUUGMJ3_REV02_REV04_CL1413323.tar.md5 file
d) CSC_VFG_I9300VFGGMJ5_1986192_REV00_user_low_ship.tar.md5 file
Just for pointers, please follow closely these steps:- (No shortcut please)
1. Load the file sinto Odin now:
Click on the AP button on Odin and select the AP_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 file
Click on the BL button on Odin and select the BL_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 file
Click on the CP button on Odin and select the MODEM_I9300BUUGMJ3_REV02_REV04_CL1413323.tar.md5 file
Click on the CSC button on Odin and select the CSC_VFG_I9300VFGGMJ5_1986192_REV00_user_low_ship.tar.md5 file
2. Click the Start button to begin flashing the Android 4.3 firmware on your International Galaxy S3 GT-I9300, and wait until you see a PASS! message in Odin’s top left box.
3. When you get PASS! message, your phone will restart automatically. You can then disconnect your phone from PC.
If you see FAIL message instead of the PASS in Odin’s top left box, that a problem. Try this now: disconnect your S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and thenrepeat from Step 3 of this guide again.Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Good Luck & may the force be with u............
nabeelrazanaqvi said:
dear I have Galaxy note 3 Sm-n900 i had the same problem this is how i fixed the problem
1. Power of your device
2- when completely of hold volume up+ home button+ power button together for few secs
3- when Samsung logo shows up release all 3 keys and it will come into recovery mode
4- first erase all user data( use volume down to navigate and power button to select)
5- erase cache/wipe cache(same procedure)
6- now reboot
when your phone will boot up it will be fixed
but remember to keep SIM Card in phone while doing this
I hope it can help you
if the problem is still there you can flash the ROM once again some times it also helps
any other help i am always there to help
Regards,
Prof. Nabeel Raza
Click to expand...
Click to collapse
did all that wont work
how did u install i installed it and it showed that is a european vodafone netwrok
kjvikram06 said:
hey i had the same prob wid my gs3, nd i too tried everything possible ( almost ) including the efs backup blah blah!! backporting blah blah ablosutely nuttin worked! http://forum.xda-developers.com/images/smilies/frown.gif
went to spamsung service center n they said plz replace ur mainboard!! cost about 130$ in india!
neway
luckily today i wanted to checkout the official android 4.3 rom for sg3 and so i flashed it on to my phone using odin nd der we go!!
my imei is no longer 0049***!!!
is back to original nd i can make calls and send/receive txt msgs!!!
link to download and detailed instruction on how to flash is below!!
http://www.sammobile.com/2013/11/03...ly-bean-leaked-firmware-for-the-galaxy-s-iii/
i hope it helps you guys! cheers nd thanks everybody for all the help
Click to expand...
Click to collapse
i installed it and it didnt work for me can u just give me details of how u installed it i dont know what to do please help
pleaseeee help
i have a samsung galaxy s3 from december 2012.i had no problems until december 2013 when the phone shut down.i send the phone to samsung to repair it because i still have warranty.after one month i received the phone.they changed the mother bord.the only problem is that is not registered on any network.i've tried every single sim from o2 lebara vodafone t-mobile 3G and nothing.i called samsung and they sad is blocked on vodafone.when i bought the phone from internet was unlocked.i've been to vodafone and they said is not blocked.i called again samsung and they said is nothing to do with them.They send me to mobile phones to unlock the phone but if i do this i will lose my warranty.i've been to different shops.nobody can unlock the phone.i think is locked on vodafone germany because i've seen some programs in the phone and the language is german.can pleaseeeeeeee someone to help me ?pleaseeeeeee.thx!!!this is my email adress([email protected])
Ooooh i'm crying already
omg finally after almost losing hope i found that fuc..ing awesome solution and solved it in about 2 mins it's for N7100 & l9500 & l9300 ww.w0lfdroid.com/2013/10/How-to-Fix-Wrong-IMEI-No-Network-Galaxy-S3-S4-Note2[/url] (add .html at the end of the link and http//: ) sorry new user can't put links in replys -_-
good luck ;D
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Me too! Is there anybody who knows a fix??
sanjoyd4 said:
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Click to expand...
Click to collapse
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
sanjoyd4 said:
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Click to expand...
Click to collapse
http://www.mediafire.com/download/t...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part1.rar
http://www.mediafire.com/download/1...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part2.rar
odin 3.07
POST RESULT AFTER
B.R
ELGHANDOR
GT-S6102 After flash touchpad not working Solution.....!!
1. Flash with Odin307
2.file is S6102DDMF4_S6102ODDMF4_S6102DDMF4_HOME.tar.md5
Thanks in Arabic ...... شكرا
elghandor said:
http://www.mediafire.com/download/t...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part1.rar
http://www.mediafire.com/download/1...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part2.rar
odin 3.07
POST RESULT AFTER
B.R
ELGHANDOR
Click to expand...
Click to collapse
Thanks in Arabic .... شكرا
:good: :good:
I am too looking for solution
I also got the same problem can you tell me how to flash the mobile? As i am noob in this things! can you step by step instructions??
teiningen said:
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
Click to expand...
Click to collapse
teiningen said:
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
Click to expand...
Click to collapse
thanks , i was having the same problem so i followed your steps and it worked for me (GT-s6102B) but it was missing Arabic so i flashed S6102JPMA3_S6102OJPMA3_S6102XXMA2_HOME.tar.md5 (GT-s6102) and it worked and arabic was installed
many thanks again
so, google brings this up for the problem, but i couldn't get odin to flash the full package from sammobile to the 6102B, getting splitfus2 to work was a bit of a riddle (64biit version doesn't have necessary libraries for it in cygwin need 32bit version to work) anyways, i created a few of them thought it might help anyone else with this issue and who are less tech savvy. these worked for me, there are BR and Chile roms for the 6102B, flashing non B roms seem to leave touchscreen unresponsive after flashing the phone.
links:
S6102B_VJMA2_ZTRMA2_VJMA2_wipe_by_SplitFUS2.zip 136.7 MB
https://mega.co.nz/#!TlAg0DyT!jlhrrTmg-EMTLLrMAXlQucfrUceG_dxrYQs00kEz058
S6102B_VJMC2_CHOMD1_VJMC3_wipe_by_SplitFUS2L.zip 123.0 MB
https://mega.co.nz/#!yxZCFJRJ!FzHpXR3uD7YjGRhiHN2BsNktqw9E7KJE88F9WE9UmMA
S6102B_VJME1_CHOME1_VJME1_wipe_by_SplitFUS2.zip 122.2 MB
https://mega.co.nz/#!vtR23CwJ!Bek7_29TNu3RbRVUjHqGAYBLVEwgUHieg6nOb0aN1wc
S6102B_VJME1_ZTOMI1_VJME1_wipe_by_SplitFUS2.zip 135.3 MB
https://mega.co.nz/#!25YQyD6T!ygTbUseF4uWQCA1hzEkiOS8zT2YSH1QMXkLGdwh0F6I
take no credit, just used splitfus2 to split the tar.md5 from sammobile and uploaded them to mega. worked to fix the 6102B, it went to reboot loop, flashed a 6102 rom with which touch didn't work.
sorry to bring ancient thread up, if anyone has this issue google will make it an easy fix pointing to this thread as it did for me.
Dear,
Hi,
I am vicky, i purchased my P780 in Jan 14, since then it was working flawlessly till last night when somehow i lost my focus and installed Chinese theme centre of Lenovo, from where i downloaded few themes for my Lenovo P780, after applying one of the themes and troubles started, there is an error msg appeared " unfortunately, Lenovo Lock Screen has stopped" after pressing ok the msg kept coming endlessly. it is not disappearing. however when i connected my phone to laptop it was detected immediately, and there are no problem in charging as well.
please help as i am not too much into the technical knowhow of the smartphone(android). but i tried to go to factory reset by pressing power+vol key after some time it shows that the phone is in meta mode, long press power and normal"
Thanks in advance.
vickey
vicksleen said:
Dear,
Hi,
I am vicky, i purchased my P780 in Jan 14, since then it was working flawlessly till last night when somehow i lost my focus and installed Chinese theme centre of Lenovo, from where i downloaded few themes for my Lenovo P780, after applying one of the themes and troubles started, there is an error msg appeared " unfortunately, Lenovo Lock Screen has stopped" after pressing ok the msg kept coming endlessly. it is not disappearing. however when i connected my phone to laptop it was detected immediately, and there are no problem in charging as well.
please help as i am not too much into the technical knowhow of the smartphone(android). but i tried to go to factory reset by pressing power+vol key after some time it shows that the phone is in meta mode, long press power and normal"
Thanks in advance.
vickey
Click to expand...
Click to collapse
Look at the message i send you and the post !
PM me if you dont succeed !
hi, i am experiencing the same problem with my lenovo S820. i downloaded a theme from the chinese theme center and when i applied the theme the same pop ups appear and there's no way for me to access my phone. do i have to do a reset from the safe mode? thanks.
matryoshkaaa said:
hi, i am experiencing the same problem with my lenovo S820. i downloaded a theme from the chinese theme center and when i applied the theme the same pop ups appear and there's no way for me to access my phone. do i have to do a reset from the safe mode? thanks.
Click to expand...
Click to collapse
Factory reset. This is what you must do.
Good luck.
Sent from my Lenovo P780
Hi,
I also face same problem. How to factory reset? or other method to solve the problem?
Thank you in advance.
Regards
stympy said:
Factory reset. This is what you must do.
Good luck.
Sent from my Lenovo P780
Click to expand...
Click to collapse
tedsuya said:
Hi,
I also face same problem. How to factory reset? or other method to solve the problem?
Thank you in advance.
Regards
Click to expand...
Click to collapse
A factory reset must be done from settings or from recovery(stock or custom like TWRP).
If you cannot acces setings in your Android you could do factory reset from recovery.
To enter or acces recovery you must do: power off your phone. Start yout phone with volume+ volume - and power buttons pressed all together.
Once entered in recovery you must do wipe. NOT ADVANCE WIPE.
Good Luck.
Hey techs, seriously in need of your precious help and suggestions!
I went to flash stock firmware on my Moto e and it was successful.After my phone successfully booted I saw a software update notification and I downloaded the update!
But the problem arose when I clicked on install update button...A few minutes later my phone screen went black.I tried to boot Into recovery but I couldn't!
Neither of the key combination are working and my phone is totally unresponsive!
When I plug into charging only the battery notification LED lightens but nothing happens on screen!
Plz help me friends!
Try force rebooting, press and hold power button for 30+ seconds.
This will delete all the data in your phone and will restart. Let me know if its working or I'll provide some other solutions.
Sent from my Potato 21 years ago
Did u try updating from 4.4.2 to later ?
Daman5202 said:
Try force rebooting, press and hold power button for 30+ seconds.
This will delete all the data in your phone and will restart. Let me know if its working or I'll provide some other solutions.
Click to expand...
Click to collapse
Brother I tried even this and all other possible key combination but got no response from device :'(
Ujwal Agrawal said:
Did u try updating from 4.4.2 to later ?
Click to expand...
Click to collapse
Yes after firmware flashing stock 4.4.2 I got an update for 4.4.4 and after installing update screen my phone went blank!
mama_thakur said:
Yes after firmware flashing stock 4.4.2 I got an update for 4.4.4 and after installing update screen my phone went blank!
Click to expand...
Click to collapse
So sorry bro. It's bricked. There already a thread which says not to update from 4.4.2.
Contact Mobileunbrick.com they may help you!
An unbrick method is being developed by devs on XDA, do wait and try those to unbrick it
mama_thakur said:
Brother I tried even this and all other possible key combination but got no response from device :'(
Click to expand...
Click to collapse
@mama_thakur and all those who are facing Moto E problems, have a look at my XDA DevDB Project: Unbrick hard bricked Motorola Moto E - Aravind V. Nair (XDA)
I have a FAQ, and some things which I'm making along with some troubleshooting steps which might be of help to all those who are facing issues.