My Samsung Tablet stops at the start up screen, choose the language then start. Does not respond to touch. I used an ODIN program. But when re-running stops at the same screen. What is the solution?
Thank you
alharbi said:
My Samsung Tablet stops at the start up screen, choose the language then start. Does not respond to touch. I used an ODIN program. But when re-running stops at the same screen. What is the solution?
Thank you
Click to expand...
Click to collapse
You need to give a lot more information if you want help. Which version of the tab do you have? What did you flash with ODIN? more info...
Samsung Galaxy Tab 10.1, the slim one. Comes with 3.1 honeycomp. I flashed it with Arabic 3.1.
Thank you for your help.
alharbi said:
Samsung Galaxy Tab 10.1, the slim one. Comes with 3.1 honeycomp. I flashed it with Arabic 3.1.
Thank you for your help.
Click to expand...
Click to collapse
Was it working out-of-the-box? Did you try to root it? give more detail about your tab software version, what steps you performed? so that people in this forum can provide some guide you.
It was working. I an not try to do root for it. The problem comes after I installed Dr. Wen Antivirus. While the programme scaning it reboot the device. But it stopped on the first screen to choose the language. No respose for the touch.
Software 3.1 - I used Odin, every thing go perfect. But when start stop on the same screen and same problem.
I dont have idea about the tab software ver. Thank you
alharbi said:
It was working. I an not try to do root for it. The problem comes after I installed Dr. Wen Antivirus. While the programme scaning it reboot the device. But it stopped on the first screen to choose the language. No respose for the touch.
Software 3.1 - I used Odin, every thing go perfect. But when start stop on the same screen and same problem.
I dont have dea about the tab software ver. Thank you
Click to expand...
Click to collapse
Maybe you have to use volume buttons to choose the language.
sent from my CM7 nokia 3210
Related
hi everyone
i hav a problem that app installer which install the origional apps of mobiles after updating the galaxy s2 isnot responding..
so when i starts the mobile it only shows notification bar n other all screen black....n then gives the error app installer
isnot responding....i tryed to solve this by changing update version of software but same problem exists
plzz help me out of this
thanks
saadiqbal52 said:
hi everyone
i hav a problem that app installer which install the origional apps of mobiles after updating the galaxy s2 isnot responding..
so when i starts the mobile it only shows notification bar n other all screen black....n then gives the error app installer
isnot responding....i tryed to solve this by changing update version of software but same problem exists
plzz help me out of this
thanks
Click to expand...
Click to collapse
it is always recommended to perform a factory data reset, after updating.
It helps, just try it.
Swyped from my Samsung Galaxy SII
Jokesy said:
it is always recommended to perform a factory data reset, after updating.
It helps, just try it.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
no the problem still exists after factory reset
saadiqbal52 said:
no the problem still exists after factory reset
Click to expand...
Click to collapse
ok.
1. Post your ROM details. Goto Settings - About, and post everything.
2. Do you have ROOT access?
3. Can you attribute the problem to any particular app or event apart from the info you already posted.
Swyped from my Samsung Galaxy SII
Jokesy said:
ok.
1. Post your ROM details. Goto Settings - About, and post everything.
2. Do you have ROOT access?
3. Can you attribute the problem to any particular app or event apart from the info you already posted.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
i cant open any settings,menu.......it shows black screen...it shows only notification bar n i can open it only...
full story is.....
i updated it with I9100XWLPO_I9100NEELP4_I9100XXLQ6_NEE version of software
after update the mobile works efficiently then my mob shows that u have a soft update..it downloaded a file of 10 mb n installed it on my mobile...
then i changed my charging strip from mobile repairing shop as my charging jack is always showing usb connected n is defective
after changing charging strip inside its sim mobile service is gone 1 hour after n shows no signal of sim card
then i wipe cache partition n factory reset n my mobile the started showing black screen...i now updates it 2 time but prob still exists
plzzz help me
saadiqbal52 said:
i cant open any settings,menu.......it shows black screen...it shows only notification bar n i can open it only...
full story is.....
i updated it with I9100XWLPO_I9100NEELP4_I9100XXLQ6_NEE version of software
after update the mobile works efficiently then my mob shows that u have a soft update..it downloaded a file of 10 mb n installed it on my mobile...
then i changed my charging strip from mobile repairing shop as my charging jack is always showing usb connected n is defective
after changing charging strip inside its sim mobile service is gone 1 hour after n shows no signal of sim card
then i wipe cache partition n factory reset n my mobile the started showing black screen...i now updates it 2 time but prob still exists
plzzz help me
Click to expand...
Click to collapse
1. When you twice updated it, after the problem started, was it via kies or Odin?
2. Can you see the galaxy SII logo when the phone is booting?
3. Do you know how to flash via Odin?
Swyped from my Samsung Galaxy SII
Jokesy said:
1. When you twice updated it, after the problem started, was it via kies or Odin?
2. Can you see the galaxy SII logo when the phone is booting?
3. Do you know how to flash via Odin?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
i can see galaxy s2 logo n second i flashed with odin many time so i knw it very well.....
saadiqbal52 said:
i can see galaxy s2 logo n second i flashed with odin many time so i knw it very well.....
Click to expand...
Click to collapse
Do you have another firmware you previously downloaded with you?
Swyped from my Samsung Galaxy SII
saadiqbal52 said:
i can see galaxy s2 logo n second i flashed with odin many time so i knw it very well.....
Click to expand...
Click to collapse
i updated twice it via odin...........after problem
Jokesy said:
Do you have another firmware you previously downloaded with you?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
i have I9100XXLQ5_I9100OXALQ5_OXA firmware n i flashd it after problem but problem still exists
saadiqbal52 said:
i have I9100XXLQ5_I9100OXALQ5_OXA firmware n i flashd it after problem but problem still exists
Click to expand...
Click to collapse
Ok.
1. Visit here: forum.xda-developers.com/showthread.php?t=1419102
2. Scroll down a little bit,
Download one of these:
CM9 Resurrection Edition for use with Odin:
20120420: Download
20120330: Download
-Download the first one.
3. Read the Odin flashing instruction there just to be double sure.
4. Flash the downloaded file via Odin.
Let me know how it goes.
Ps: Remove SIM before flashing via Odin.
Good luck
Swyped from my Samsung Galaxy SII
Mr.
saadiqbal52 said:
hi everyone
i hav a problem that app installer which install the origional apps of mobiles after updating the galaxy s2 isnot responding..
so when i starts the mobile it only shows notification bar n other all screen black....n then gives the error app installer
isnot responding....i tryed to solve this by changing update version of software but same problem exists
plzz help me out of this
thanks
Click to expand...
Click to collapse
I have same problem after upgrading please help!
i got also same problem after update 4.0.4
application installer is not responding. after start up no menu and setting shows
pls help
amit_deswal22 said:
i got also same problem after update 4.0.4
application installer is not responding. after start up no menu and setting shows
pls help
Click to expand...
Click to collapse
hi
Did anybody found solution about the problem ??
Hi
My S3 is stuck on the initial screen that says Samsung Galaxy S3 GT-19300. It has been like that since I got up. If I press the on/off button nothing happens. If I press it for a long time it the screen goes of for about a second then the same screen appears. I tried taking the a battery out put it back in switched on and the same screen appears. When I connect the phone to my laptop my laptop does not recognise the phone.
Please help
Ally
anm1966 said:
Hi
My S3 is stuck on the initial screen that says Samsung Galaxy S3 GT-19300. It has been like that since I got up. If I press the on/off button nothing happens. If I press it for a long time it the screen goes of for about a second then the same screen appears. I tried taking the a battery out put it back in switched on and the same screen appears. When I connect the phone to my laptop my laptop does not recognise the phone.
Please help
Ally
Click to expand...
Click to collapse
Did you flash a rom from this forum? If so, your bricked.. This is the US version on Sprint (SPH-L710) Yours is the international version which can be found on this section here... http://forum.xda-developers.com/forumdisplay.php?f=1563.
We get a few I9300 people in here and seems to be more often then not. Anything in here that is flashed my render your phone nothing more then a paperweight. Check the forums before flashing anything. (incase you did) Thank you and have a nice day.
Moved to I9300
Now that you have already flashed the wrong firmware.. Try the following..
If you have CWM... Flash any intended for your device.. Wipe data factory reset.. Try booting
If that is not working then..
Download the stock firmware.. Flash it using Odin.. Boot into recovery and do a factory reset... Then see if your device boots..
sent from here, there, somewhere!!
Stock ROM location?
zoot1 said:
Now that you have already flashed the wrong firmware.. Try the following..
If you have CWM... Flash any intended for your device.. Wipe data factory reset.. Try booting
If that is not working then..
Download the stock firmware.. Flash it using Odin.. Boot into recovery and do a factory reset... Then see if your device boots..
sent from here, there, somewhere!!
Click to expand...
Click to collapse
Where can i find the stock rom for international GS-III? Honestly I have no idea where to find it. People say "download stock firmware" but they never put where it can be located. We need a firmware bible of some sort. Thanks if someone can help me out!
TheEnd94 said:
Where can i find the stock rom for international GS-III? Honestly I have no idea where to find it. People say "download stock firmware" but they never put where it can be located. We need a firmware bible of some sort. Thanks if someone can help me out!
Click to expand...
Click to collapse
Sam mobile .
http://www.sammobile.com/firmware/?page=3
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Me too! Is there anybody who knows a fix??
sanjoyd4 said:
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Click to expand...
Click to collapse
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
sanjoyd4 said:
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Click to expand...
Click to collapse
http://www.mediafire.com/download/t...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part1.rar
http://www.mediafire.com/download/1...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part2.rar
odin 3.07
POST RESULT AFTER
B.R
ELGHANDOR
GT-S6102 After flash touchpad not working Solution.....!!
1. Flash with Odin307
2.file is S6102DDMF4_S6102ODDMF4_S6102DDMF4_HOME.tar.md5
Thanks in Arabic ...... شكرا
elghandor said:
http://www.mediafire.com/download/t...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part1.rar
http://www.mediafire.com/download/1...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part2.rar
odin 3.07
POST RESULT AFTER
B.R
ELGHANDOR
Click to expand...
Click to collapse
Thanks in Arabic .... شكرا
:good: :good:
I am too looking for solution
I also got the same problem can you tell me how to flash the mobile? As i am noob in this things! can you step by step instructions??
teiningen said:
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
Click to expand...
Click to collapse
teiningen said:
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
Click to expand...
Click to collapse
thanks , i was having the same problem so i followed your steps and it worked for me (GT-s6102B) but it was missing Arabic so i flashed S6102JPMA3_S6102OJPMA3_S6102XXMA2_HOME.tar.md5 (GT-s6102) and it worked and arabic was installed
many thanks again
so, google brings this up for the problem, but i couldn't get odin to flash the full package from sammobile to the 6102B, getting splitfus2 to work was a bit of a riddle (64biit version doesn't have necessary libraries for it in cygwin need 32bit version to work) anyways, i created a few of them thought it might help anyone else with this issue and who are less tech savvy. these worked for me, there are BR and Chile roms for the 6102B, flashing non B roms seem to leave touchscreen unresponsive after flashing the phone.
links:
S6102B_VJMA2_ZTRMA2_VJMA2_wipe_by_SplitFUS2.zip 136.7 MB
https://mega.co.nz/#!TlAg0DyT!jlhrrTmg-EMTLLrMAXlQucfrUceG_dxrYQs00kEz058
S6102B_VJMC2_CHOMD1_VJMC3_wipe_by_SplitFUS2L.zip 123.0 MB
https://mega.co.nz/#!yxZCFJRJ!FzHpXR3uD7YjGRhiHN2BsNktqw9E7KJE88F9WE9UmMA
S6102B_VJME1_CHOME1_VJME1_wipe_by_SplitFUS2.zip 122.2 MB
https://mega.co.nz/#!vtR23CwJ!Bek7_29TNu3RbRVUjHqGAYBLVEwgUHieg6nOb0aN1wc
S6102B_VJME1_ZTOMI1_VJME1_wipe_by_SplitFUS2.zip 135.3 MB
https://mega.co.nz/#!25YQyD6T!ygTbUseF4uWQCA1hzEkiOS8zT2YSH1QMXkLGdwh0F6I
take no credit, just used splitfus2 to split the tar.md5 from sammobile and uploaded them to mega. worked to fix the 6102B, it went to reboot loop, flashed a 6102 rom with which touch didn't work.
sorry to bring ancient thread up, if anyone has this issue google will make it an easy fix pointing to this thread as it did for me.
Device- Samsung Galaxy Tab 3 8.0 SM-T3100ZWYXAR
Now here is my problem. Today i was trying to install a custom rom and accidentally wiped my system memory. I can still boot into TWRP but when i try to install a rom everything seems to go well until it goes to reboot and says there is no OS and gets stuck on the Samsung galaxy splash screen. Its under my impression i need the PIT file to fix this problem but i cant find it anywhere. if anyone has the file or another solution please help. Thanks so much.
reply
infixion said:
Device- Samsung Galaxy Tab 3 8.0 SM-T3100ZWYXAR
Now here is my problem. Today i was trying to install a custom rom and accidentally wiped my system memory. I can still boot into TWRP but when i try to install a rom everything seems to go well until it goes to reboot and says there is no OS and gets stuck on the Samsung galaxy splash screen. Its under my impression i need the PIT file to fix this problem but i cant find it anywhere. if anyone has the file or another solution please help. Thanks so much.
Click to expand...
Click to collapse
so your os is dead and you have a tab 3
is it a sim service tab
why cant u install ubuntu on the tab it also work with gsm
replie it to get more information
KIBS2173 said:
so your os is dead and you have a tab 3
is it a sim service tab
why cant u install ubuntu on the tab it also work with gsm
replie it to get more information
Click to expand...
Click to collapse
no its the wifi version. and i just want to have the stock os back on it please help. im pretty sure all i need is the PIT file but i have no clue on how to get it.
OK first tell me what was the recent os in the tab that way I cud help you
Sent from my Opal 800 using xda app-developers app
While trying to update Kernel recovery version TWRP from the G925 to the G920, the update completed successfully, but when the device booted I noticed that the touch pad was working in reverse.
When I touch one side the opposite side responds.
All of my attemps to restore the decive to original ROM with PIT were successful, but the touch pad is still working in reverse.
Please, can someone help me, is there any hidden menu or option that can calibrate the screen/touchpad back to nomal ?
SHATTAH said:
While trying to update Kernel recovery version TWRP from the G925 to the G920, the update completed successfully, but when the device booted I noticed that the touch pad was working in reverse.
When I touch one side the opposite side responds.
All of my attemps to restore the decive to original ROM with PIT were successful, but the touch pad is still working in reverse.
Please, can someone help me, is there any hidden menu or option that can calibrate the screen/touchpad back to nomal ?
Click to expand...
Click to collapse
Can you please update us what you did to fix it?
Where did you found PIT files for S6.
Thank you.
@SHATTAH
have you try :
1: if you can save all your data , because all will be deleted after( 2 and 3 )
2: factory reset with the keyboard dial : *#87976633# and reboot your phone
3: recovery mode for wiping cache partition and data/factory reset http://wgnszoz9s1.1fichier.com/
regards
fix
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Can you plase add I pic...
Did you still have to Flash STOCK rom+Factoy reset or only the code...?
Thanks :good:
This is the screen shot you ask...
had same problem with my newly bought s6 within 2 days after putting custom rom , immediately i went to samsung service centre , as the device is just two days old, they replaced the device with new one., Even after i had Knox warrenty void:1
-JFK- said:
This is the screen shot you ask...
Click to expand...
Click to collapse
Thanks Alot,
Your are A Guy of Great Clever. I will ever Thanks to You.
Thanks A lot Sir......
SHATTAH said:
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Click to expand...
Click to collapse
Thank you so much!
SHATTAH said:
While trying to update Kernel recovery version TWRP from the G925 to the G920, the update completed successfully, but when the device booted I noticed that the touch pad was working in reverse.
When I touch one side the opposite side responds.
All of my attemps to restore the decive to original ROM with PIT were successful, but the touch pad is still working in reverse.
Please, can someone help me, is there any hidden menu or option that can calibrate the screen/touchpad back to nomal ?
Click to expand...
Click to collapse
Hi Shattah.
Do you remember the which version of TWRP of the G925 (edge) did you use on the G920 (flat)? Was it the chinese, the t-mobile, or some other? Trying to install TWrp on my s6 g920i flat (demo unit) and no luck so far. Please let me know and I'll try that trick. Cheers.
is that command supposesed to work with default os that comes with the s6 edge. U went in the phone field and pasted the code where my phone reponded by telling me I was dialing a wrong number.
Thanks
SHATTAH said:
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Click to expand...
Click to collapse
thanks mybro.. :* :*
SHATTAH said:
Dear friends I was able to fix the problem. To enter dialer
*#2663# and then windows open and press on
Tap fw update general and then fix
Click to expand...
Click to collapse
thank you a lot, you saved my phone