[Q] How can I fix the battery readings on Kenneths Gingerbread release? - Atrix 4G Q&A, Help & Troubleshooting

I'm incredibly happy with Gingerbread (even though I admittedly only had Froyo for a day, REALLY good timing ), except for one small, minor, insignificant problem: the battery readings jump by 10%.
I scoured the topic on the Dev forum, and tried wiping the battery stats (with both the "Battery Calibration" app on the marketplace AND the instruction Kenneth gave using CWM Recovery) but it's still not reading right. I didn't install a battery percent mod, which I read could mess with the readings.
Does anybody have any other ideas? Like I said, everything else is working great, and if I didn't get the point across in the first paragraph, it's really not a HUGE deal or anything like that, just an annoyance.
Thanks!

Don't think it's Kenn's mod. The OTA 2.3.4 has similar battery jumping stats. Every time I reboot I get an extra 5-10% lol but it drains down quicker.

When you say they jump by % 10, do you mean it jumps up and down or that it only registers the charge loss in% 10 increments? If its the former then its a known issue where battery calibration is your best shot at fixing it. If its the latter, this is normal for the atrix. It only registers % 10 increments by default.
Sent from my MB860 using XDA Premium App

I don't think we're having the same problem. The READINGS are jumping on mine, so it'll go from 100% to 90% to 80% etc. I never see anything in between. The battery seems to be lasting as long as I could expect, considering how much I've been using it. I'm having a hard time figuring out which side of the reading it's actually on, even. Like, if it's reading 90% is it 90-100 or 80-90.
Also, just to clarify, I wasn't outright blaming Kenneth's ROM for anything, as far as I know his release is stock, and just repacked so it can be installed with CWM (maybe deodexed? Or maybe that was a different thing altogether? There's been so much coming out I can't keep track). I just didn't know if it made a difference or not, so I was as specific as possible.
Thanks for your reply though! Maybe someone can shed some light for both of us
Edit: goscrewsir, I used to get single percent readings. Since it's by default, is there a setting somewhere that I'm missing? Thanks for the info!

The last person to answer is right, the 10% incrementing is normal. It shows 90% for all the values between 80 and 90...there is a mod available to show 1% increments however, which you should be able to find in the themes and apps board.

OK, I guess I didn't notice since I installed GingerBlur almost immediately, and maybe GingerBlur had a half version of that mod built in (the system read single %, but the icon was normal)?
Thanks again to everyone for the explanations!

[MOD] StatusBar Fix for 2.3.4 - 1% Battery!! - CWM (6/28) by Nottach

Thanks neotekz, I knew where to find it. Plus the one you linked to is for HKTW.
I wonder if Nottach would be kind enough to leave out the custom battery icon. He seemed to be doing a lot of single requests in that topic, haha.

So what does the battery graph look like in 2.3.4? The stock graph that shows usage, does it look chunky and not smooth? Or does it look correct?

I seem to have a problem with the battery reading. Also if I reboot the battery goes from 85% to 99% . When I hit 70% it drops to 50% immediately. Clearing battery stats doesn't work.
Sent from my MB860 using XDA App

mvgc3 said:
Thanks neotekz, I knew where to find it. Plus the one you linked to is for HKTW.
I wonder if Nottach would be kind enough to leave out the custom battery icon. He seemed to be doing a lot of single requests in that topic, haha.
Click to expand...
Click to collapse
he updated the mod when ken released 2.3.4. it works for both versions.
Sent from my MB860 using XDA Premium App

so does the 2.3.4 battery graph work normally on the atrix? on other phones the new battery graph shows 1% battery, so the graph is smooth and accurate.
does the atrix 2.3.4 version of this graph work the same way? or does it only show the graph in 10% chunks?

Related

HOW TO: Solve Battery Life Issues

***NOTICE***
The ROM Manager version of CWM does NOT wipe battery stats properly, as with many other things. What you need is jt1134's version of CWM that is all happy and works and stuff.
You can find his happy CWM here. And here. And also here.
And here.
Big thanks to LegionTHEFecalExcretion for the heads up on that.
***END NOTICE***
NOTE: On current DL30 and EB01 ROMs, you will not see battery life like you did on DL09 with undervolted kernels. There are NO undervolted kernels as of yet, everything kernel wise with Froyo ROMs in very much stock. These steps will improve your battery life in comparison to when you flashed Froyo, but you are not going to see spectacular changes in battery life up to what you were getting with undervolted DL09, etc. It's just not possible until we get undervolted kernels and Froyo matures for our device, development wise.
Hi everyone, I've been seeing a lot of threads about bad battery life, whether switching to Kaoscinate, Vanilla, or DL30. Stop it! Just kidding. There is a simple process everyone should follow when switching between different enough ROMs, like AOSP, CM6 and TW Eclair and Froyo. This is how you retrain your battery.
1. Charge your battery to 100% (when it gets there, let it SIT there, your phone is NOT reporting correctly).
2. Reboot to Recovery and Advanced -> Wipe Battery Stats.
3. Reboot, and use your phone until it is VERY low (5-10%, you can let it die if you want).
4. Charge your phone back to 100%
5. (Optional) Power down, then power on phone. (Thanks goes to BrwnSuperman for this suggestion, give it a try!)
Your battery issues should be solved. This needs to be done every once in a while, especially when switching between different ROMs and OS versions.
User dalrym05 posted this alternate method for retraining the battery on page 4 as well, so I thought I would share it here in the OP. I'm posting this as a USE AT YOUR OWN RISK method, as I have not tested it, and am not quite sure what the *228 steps for it actually accomplish and have to do with retraining the OS battery reporting, so I'm leaving it quoted to dalrym05 for the time being.
dalrym05 said:
Here were my steps to better battery.
1.*228 option 1
2.*228 option 2
3. Run battery completely dead to 0%
4. Plug in and boot immediately into cwm
5. Wipe battery stats and dalvik cache
6. Reboot and let charge fully before unplugging
7. Completely discharge again and fully charge again.
After this you should notice a very nice increase in battery as I did. My battery life is back up to par with eclair.
Click to expand...
Click to collapse
NOTE: I did edit his post to make it a little more clear. I'm slightly anal retentive that way.
HybridByNature had an excellent suggestion on page 4. If people have good tips and tricks for maintaining good battery life, and they are easily reproducible, then I will gladly add them to the OP here. What works for you?
HybridByNature said:
This might also be a good place to add tips & tricks to extending battery life.
IE
-Close programs that you aren't using.
-Don't leave your camera or navigation running in the background.
-Turn off WiFi & GPS etc when you aren't using them.
-Don't run your screen at full brightness if you can help it.
-Figure out what uses more battery life than other things:
Pandora, internet browsing, downloading, camera/camcorder, Angry Birds etc.
If you are rooted, try and narrow it down to the best kernel/theme for your situation. I've found that I have better battery with a non-voodoo kernel but the performance increase is worth it so that's a trade-off that I make.
Let's hear from our readers: What is working for you?
Click to expand...
Click to collapse
Would not surprise me if this is all it is. I have turned my phone off at 5% for an hour and turned it back on without charging and then it showed 45%. I know when batteries are low letting them sit a little bit can help, but not that much.
It is just being reported inaccurately by the OS.
This how to has been reposted like 9001 times. But yes, this is one day to do it.
Syn Ack said:
This how to has been reposted like 9001 times. But yes, this is one day to do it.
Click to expand...
Click to collapse
Yes, but not as a thread, it gets posted in everyone else's "Why does my battery life suck ass" threads, so I made this so maybe people would see it and try it before posting another useless question thread in Development.
Definitely works though. Did it yesterday. Good post. It has been posted in other threads ... but I think we all know people don't read through everything very often.
Sent from my SCH-I500 using XDA App
I have the battery charger and 3 batteries, I always run my battery low and leave it in the charger for a day.
I did this last night and it didn't work too well for me.
Also, when I go to wipe battery stats in the recovery, it doesn't tell me if it wiped or not, just goes back to the advanced menu.
And also, should I be concerned that when I cold boot into the recovery, it doesn't appear to be CWM? It says Android recovery...I know I have CWM recovery installed.
Samerhing happens to me... and I just took it off the charger and I'm on 96 percent in less than 1 min
Sent from my SCH-I500 using XDA App
miguel11691 said:
Samerhing happens to me... and I just took it off the charger and I'm on 96 percent in less than 1 min
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Wow same here..I just took mine off the charger bout 10 minutes ago and it's at 95% now. I guess I'm gonna let the battery run completely dead and charge it and see what happens.
I did something similar. I charged to 100% while it was on, removed from charger then powered off. When phone was off I plugged charger back in and waited til it was at 100% then unplugged again and powered on. Waited until phone was completely on then unplugged again and connected to charger. Waited til it was at 100% and while still plugged in at 100% booted into recovery and wiped battery stats. Then rebooted phone into OS and unplugged. I had tried this previously with DL09 and it helped a little. Last night I wanted to see how my battery would drain after doing this. With WiFi on and I got about 10 emails during the night, from 8:30pm to 6:00am I lost only 13%!!! Previously I would have lost from 35 to 40%. ymmv
jv
my phone doesnt sleep even though my screen is off... how can i fix that
miguel11691 said:
my phone doesnt sleep even though my screen is off... how can i fix that
Click to expand...
Click to collapse
Spare Parts says "Time spent without sleeping: 53m 15s (100%)
Wow.
If I go to Battery History and change the top dropdown to Partial Wake Usage, it says Android System at the top with a bar that's at least 75% full.
ataranine said:
Spare Parts says "Time spent without sleeping: 53m 15s (100%)
Wow.
If I go to Battery History and change the top dropdown to Partial Wake Usage, it says Android System at the top with a bar that's at least 75% full.
Click to expand...
Click to collapse
Looks like Samsung has to make an update or patch to this LEAKED version LOL. I'm so fed up with people failing from Samsung and Verizon for this device.
Syn Ack said:
Looks like Samsung has to make an update or patch to this LEAKED version LOL. I'm so fed up with people failing from Samsung and Verizon for this device.
Click to expand...
Click to collapse
Yeah looks like I'll be going back to DL09.
ataranine said:
Spare Parts says "Time spent without sleeping: 53m 15s (100%)
Wow.
If I go to Battery History and change the top dropdown to Partial Wake Usage, it says Android System at the top with a bar that's at least 75% full.
Click to expand...
Click to collapse
Give it some time. I was showing that as well but after about half a day I rechecked and it showed the correct percentage for Running time.
jv
johnnyv5 said:
Give it some time. I was showing that as well but after about half a day I rechecked and it showed the correct percentage for Running time.
jv
Click to expand...
Click to collapse
yours was also telling you it spent 100% of it's time without sleeping? Mine's been doing it for 2h 9m 25s...the same amount of time my phone's been on.
ataranine said:
yours was also telling you it spent 100% of it's time without sleeping? Mine's been doing it for 2h 9m 25s...the same amount of time my phone's been on.
Click to expand...
Click to collapse
I was pulling my hair out trying to figure this out too. It seems to have solved itself. Right now it is showing 47% usage. Sorry I couldn't help.
Jv
Sent from my SCH-I500 using XDA App
This is a proven technique, and it takes patience. Seeing the battery drop from 100% down to 95 or 96% after unplugging is normal behavior. I've done this already. Left my phone unplugged overnight and lost 1% battery. If you're too impatient to take the time to do this, that's your loss. You'll see the battery life "improve" over the course of a few days as the reporting gets more and more accurate.
Sent from my Fascinate using the XDA app
I agree with supplysidejesus. This is a standard practice and should be done with each major rom or kernel install. This leak hasn't been put long enough for most of us to know what our expected battery life will be yet. Give it a few days for your phones to adjust.
ataranine said:
yours was also telling you it spent 100% of it's time without sleeping? Mine's been doing it for 2h 9m 25s...the same amount of time my phone's been on.
Click to expand...
Click to collapse
try disabling gps in the notifications, that worked for me, but once i turn gps on again, it will drive up to a high percentage.

[Q] How do I fix battery status update?

I am currently running Das_Bamf 1.3.2 but I have heard that the problem also exists on the stock rom/hernel.
My battery percentage does not drop over time. Only after I reboot the phone does it show any change. Does anyone know how to fix it?
Try installing battery left widget. Gibes you an accurate picture of what's going on. You will have to start with a full batteryband run it all thebwaybdown to calibrate.
Sent from my ADR6400L using Tapatalk
I don't really want to be forced to install a widget on one of my home screens just to know what percent my battery is at. I would like to figure out why the status bar indication isn't updating. It was working when I first got the phone.
cashmore1985 said:
I don't really want to be forced to install a widget on one of my home screens just to know what percent my battery is at. I would like to figure out why the status bar indication isn't updating. It was working when I first got the phone.
Click to expand...
Click to collapse
I agree. I had the same problem with Das Bamf. I don't see anyone else really complaining about it and my post was basically overlooked when I asked about it in the thread for the ROM. I ended up just switching to the new version of thunder and lightning and all is well. I'll give Das Bamf a try again when it's working.
bretnj said:
I agree. I had the same problem with Das Bamf. I don't see anyone else really complaining about it and my post was basically overlooked when I asked about it in the thread for the ROM. I ended up just switching to the new version of thunder and lightning and all is well. I'll give Das Bamf a try again when it's working.
Click to expand...
Click to collapse
are you using the extended battery? I am and I am seeing the same problems but I have flashed back to my original root stock rom with the htc kernel and still seem to have the problem. I may have to try thunder rom if the battery does work
Stock battery. I have tried a wipe and that didn't fix anything. So far I have no real idea what might be causing it since it seems to be happening on different roms including stock as well as kernels.
I was having this issue with VirusROM for the first week or more that I ran it because I didn't flash on a full charge (stupid me)... It also dropped from 100% to 90% in about 10 minutes when it did drop without rebooting - not sure if you have that problem. I resolved all of this by bump charging. There's a workaround for the CWM issue that I followed in another thread found here: http://forum.xda-developers.com/showthread.php?t=1016508 ... ie. charge with your phone booted; reboot, charge, reboot, charge, etc. until you are at about 99% when you reboot. Then just wipe your battery stats and use like normal. I didn't think that it had worked permanently until a couple days later when my battery was recalibrated. I'm running the same kernel as those of you on Das BAMF if you didn't change it so I hope this helps you as well. Basically after I did this it only dropped 2-3% on reboots when not fully charged but I believe that is normal since it takes a lot of power to boot the phone up completely. Hope this helps.
Edit: Wanted to point out that after I wiped my battery stats I didn't reboot all the time to see if it was dropping since I figured that would affect calibration. Ran it until it died on normal use and got a lot longer battery life than stock, which makes me question as to how "accurate" it actually is after rebooting. Just a thought.
could you also just re flash on a full charge?
I don't think so, because your battery may not be at 100% if it says it is, which is why you would have to bump charge.
Ah, I see.
Well I think it worked. Thanks a ton!
Sent from my ADR6400L using XDA Premium App
FWIW, I'm on the extended battery and stock ROM and there's no issue that I can observe in terms of the percentage not dropping/reporting properly.
Most of this stuff seems like urban legend and placebo effect to me.
Does anyone have any documented (by Google) evidence that any of this "battery calibration", "batterystats.bin wiping", "only flash roms on 100% charge" stuff is legit? If not some documentation on the OS, then some actual controlled testing with data that supports these concepts as legitimate?
I mean something that documents how batterystats.bin operates and what it controls and doesn't.
My understanding is that the batteries themselves have integrated circuits that control the battery's charge. Surely this can be communicated to the phone (how else does the phone know the voltage being supplied as it diminishes?).
Seems that an intelligently designed OS would take advantage of the battery's own reporting and just go by its charge status rather than come up with some silly scheme that involves the phone using batterystats.bin to control it; especially when, if the urban legends are actually true, that file is so easily confused and needs to be wiped so often. Gr
I see where you are coming from and agree that testing needs to be done but bump charging and deleting battery stats got my battery notification to start indicating again
Sent from my ADR6400L using XDA Premium App

terrible battery life!

Hi all, I'm new to this part of the xda forums as I had a nexus before, just got the upgrade to the Atrix, rooting,unlocking of bootloader everything went well but I just flashed Aura's from with feux kernel and im getting really really bad battery life, like I'm talking 4-5 hours. There is one process thats really confusing me, its just called "x" and its sitting there taking about 35% battery, my screen is taking 55% battery.
It's getting really annoying as my nexus used to give me about 12 hours and the only reason I moved to the atrix was to get the better battery life that I saw with all my atrix touting friends (they all had 1-2 days battery life) I'm about to flash homebase and see if that fixes it but I don't know whats going on. I have a UK MB860 and I used http://forum.xda-developers.com/showthread.php?t=1196747&highlight=t-mobile+root to root. Pleaseee can someone help!
X is the webtop and there is a fix somewhere for that (doesn't completely work). Just flash CM7 beta. Its much better than any other ROM and has the best battery life. Everything except the finger print scanner and webtop work.
Also I had really good battery on the Ying Yang ROM.
Speedily sent from CM7 Beta
I think I might give CM7 a go you know, I loved CM on the nexus, even after it killed the memory chips it was still good! Im going to try it, is it really stable?
EDIT:
since updating to CM7 and Wiping my battery stats I have some how gained 39% battery!
amzter said:
I think I might give CM7 a go you know, I loved CM on the nexus, even after it killed the memory chips it was still good! Im going to try it, is it really stable?
EDIT:
since updating to CM7 and Wiping my battery stats I have some how gained 39% battery!
Click to expand...
Click to collapse
I haven't had any issues with it. And the gain is very odd.
Speedily sent from CM7 Beta
Try alien, i had some battery issues with some other roms and kernels and tried alien and all is good.This phone comes with an 1930Mah battery one of the largest i've ever seen and it lasts me 12 hrs on heavy use.
battery stats
I've had great battery life on the atrix, now I'm getting a good look at the atrix on the 4800mah battery. I'm a heavy user and I could not get over 24 hours. And now I have 59 hours and I have yet to actually see how far I can take it. Cm7 beta. Juicey....
I find that all gingerbread roms have horrible battery life compared to froyo on the atrix. Cm7 battery is worse but the phone is smoother. Faux 1.3ghz kernel has even worse battery.
Regardless of the radio or magical method of resetting the battery state you use.
1:25 screen time and at 47% battery. Been off the charger for 6:15. It will make it through my 10hr shift with about 20% remaining if I'm lucky, usually I just toss it on the charger.
Background data is off, email and social apps are manual sync and wifi is off.
Sent from my MB860 using XDA Premium App
one weird thing I am seeing is the display which is at 0% brightness is using 91% battery
Also the better battery stats app says my actual battery is 91% but the phone is reporting 66% I wiped thenbattery stats but nothing!
please help!
If you haven't taken a look at it, give this a shot:
http://forum.xda-developers.com/showthread.php?t=1198333
Starting to mess around with your phone opens up a world of things that can go wrong. Learn to calm down, search the forums, and try a variety of fixes before giving up on something.
...and use nandroid.
ian426 said:
If you haven't taken a look at it, give this a shot:
http://forum.xda-developers.com/showthread.php?t=1198333
Starting to mess around with your phone opens up a world of things that can go wrong. Learn to calm down, search the forums, and try a variety of fixes before giving up on something.
...and use nandroid.
Click to expand...
Click to collapse
I was just about to post that lol. Also make sure every time you flash a new rom you are at 100% if not that is a sure fire way to cheat yourself out of battery life. I don't know if I'm just one of "the lucky ones" but I easily get over 16+ hours with moderate usage. I'm running CM7 beta with quite a few things frozen.
Ok so I followed the guide to perfection and it didn't improve the battery life one bit! I'm trying hard to find a t-mobile radio I can flash as I have read around it could be my radio that is the culprit and I am also getting rubbish HSDPA readings, I should be getting full bars but since switching to homebase Im only getting one bar.
Using watchdog I have noticed that the Xorg process is using over 50% cpu which does not seem right to be and I believe that because its a linux process Watchdog can't kill it. Is there anyway of fixing this?
1) Uninstall Tango, Facebook and Handcent SMS if any of the three are installed. They are huge battery drainers and you can find less battery hogging substitutes
2) Freeze any unnecessary apps, I believe there is a thread somewhere in the General section that has a pretty decent freeze list (if you flash CM7, you will have very little to freeze but that's good!)
3) Keep brightness down to a minimum when you can, I've noticed kicking the brightness up rather high can be pretty demanding on your battery
4) Set SetCPU Profiles to something like this...
Screen Off 216/216
Charging 1100/216
In Call 456/216
Battery <20% 456/216
Battery <10% 216/216
5) If you have the proper kernel set the CPU govner to power saver.
6) Undervolt, test yours and never apply set on boot unless you are positive it's stable, mine are something like this...
1100 MHz -50mV
1000 MHz -50mV
912 MHz -50mV
750 MHz -50mV
608 MHz -100mV
456 MHz -150mV
216 MHz -200mV
This way when you're phone is idling with the screen off, in a call or low on battery it is undervolting heavily to save maximum amounts of battery
With this setup I can get 30+ hours pretty regularly with moderate-to-heavy usage (weekdays/non-work days), 22-25 hours with more heavy usage (work days) and close to 48 hours with little usage (weekends).
It all depends on your usage and your phone but I have found this setup here to work fairly well.
I am currently on CM7 Beta, stock CM7 radio and stock CM7 kernel, running at 1100/216 when above profile conditions aren't met. 32% been running since 9 am this morning, it is now 3:15 am, today was a long workday.
I can almost guarantee (almost) that its your rom/kernel combination. Had same problem til I changed.
Sent from my MB860 using XDA Premium App
fastboot erase osh
That will nuke your webtop & fix your problem.
I'm now using faux kernel for CM7 and that hasn't improved anything, in fact I think it it has made it worse. It's getting really irretating because using the watch dog app it always says there is one linux process on every rom I use that is clocking at over 50% cpu usage and It won't let me kill it (probably because it's a linux process), its really annoying me because all I want is my phone to work properly but to enjoy the full rooting experience. I know countless amounts of people with atrix's and they get a full day and a bit out of their phone with heavy usage i can't even manage 10 hours!
amzter said:
I'm now using faux kernel for CM7 and that hasn't improved anything, in fact I think it it has made it worse. It's getting really irretating because using the watch dog app it always says there is one linux process on every rom I use that is clocking at over 50% cpu usage and It won't let me kill it (probably because it's a linux process), its really annoying me because all I want is my phone to work properly but to enjoy the full rooting experience. I know countless amounts of people with atrix's and they get a full day and a bit out of their phone with heavy usage i can't even manage 10 hours!
Click to expand...
Click to collapse
Watchdog eats battery like a mthrfckr, get away from that. Install BetterBatterStats instead & look for wakelocks. Which linux process are you noticing with that high cpu usage?
How many hours of screen time do you get in those 10 hrs?
Have you tried with a fastboot wipe & internal storage format prior to installing a new rom? Are you using the latest recommended radio for your phone?
amzter said:
please help!
Click to expand...
Click to collapse
Turn background syncing off if you are using that, and get in the habit of doing manual updates.
Too many times (with ANY Android device) people leave background syncing on and it tries sending/receiving data in a weak signal spot when you don't realize it. That's like a hot knife through butter on a battery.
Leave syncing off permanently if possible! That's a huge improvement right there for anyone...
Sent from my GT-I9000 using xda premium
ccrows said:
Turn background syncing off if you are using that, and get in the habit of doing manual updates.
Too many times (with ANY Android device) people leave background syncing on and it tries sending/receiving data in a weak signal spot when you don't realize it. That's like a hot knife through butter on a battery.
Leave syncing off permanently if possible! That's a huge improvement right there for anyone...
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
That's a bit radical, no?
I'd say use Green Power so the phone can update every half hour or hour. It's a smartphone at the end of the day..

Photon Battery - Sedio Extended

So I was one of those who was finding my battery life to not be sufficient on the Photon and bought the Seidio extended battery. First thought is that it does make the phone heavier, but I can deal with that. Not a deal breaker.
My issue is that the Photon doesn't recognize the fact that I now have the extended battery. I've spent the last two days using Battery calibration software (charging overnight to 100%) and then trying to discharge completely and recharge. The problem is that the phone continually is showing 1% for almost 3-4 hours if not longer. I can't get it to recognize that there is more juice in there.
While it's great that it seems to be working well (first real work day with it today), having the battery drain like mad (or seemingly) and then sitting at 1% for half or more of the day and not knowing when it will die is a problem.
I wonder if this is why the stock seemed to drain so quickly - maybe it's a programming bug? Firmware bug? I dunno. In any event, any suggestions on how to make the phone actually see that there's more juice would be great.
As an FYI I've used "Battery Calibrator" - both of them and Battery Drainer and Fast Discharge to get the phone down. I am rooted, but everything is stock other then the root itself.
I spoke with Sedio - they said I should unroot the phone and do a master reset. I can't believe that would make it work better - but I'd rather ask this community first.
Thanks!
Check in the accessory forum there is a couple things on the Seidio battery and some people there that have them may have run into the same issue and have a fix for it.
Can't seem to find a thread where people talk about aa problem with it. Can you point me in the right direction?
Sent from my MB855 using Tapatalk
I meant about the battery not that specific problem. If you post there they may have had a similar issue
Sent from my MB855 using XDA App
Ahh.. Ok - actually someone on AndroidCentral just responded indicating the same issue on a non-rooted phone.. I'm gonnna try doing a full restore to see if that helps..
Yeah. Give that a shout and let us a know if it helps.
Sent from my MB855 using XDA App
have this battery, after the initial eight cycles allow nearly complete discharge, allow to charge for at least two hours after phone indicates battery is fully charged..... my battery is working very well, just use a battery indicator from the market, I didnt piss around with any battery calibrators, think this might be your problem, have never used a calibrator on any of my phones with extended batteries. Android market probly has an app to wipe your ass.....do you really need it? Hope the analogy is clear to you.
LOL fair enough. I did do the full flash this morning - so I'm unrooted.. Hasn't seemed to help - drain looks the same.. Been through about 6 full cycles since I got the battery. What battery indicator program are you using? I have battery circle and it's got the same issue.
Again - battery lasts just fine - but the amount of power left is never accurately indicated to me - and that's the problem.
I have had many Seidio Batteries, dating back to the OG EVO. The problem I have with this particular battery is this: These batteries work "properly" when charged on an Independent Charger, NOT inside the phone. If you Cycle/Discharge/Charge with this Battery on an External Charger, the Battery should calibrate correctly. I still believe the issue with charging within the phone, is that the Mopho doesnt accurately measure the Battery Capacity. Try and External Charger, should solve your problems....
riggy
Riggy -
Battery def is charging fully as I get tons of life - the MoPho only shows 1% left though for hours on end.. It's a matter of it doesn't see the correct amount of juice left. As per cutter2668, it may just be a situation of discharge - charge. Dunno.
As an FYI I did the full flash this morning, and I haven't really seen a difference in the phone telling me how much batt life I had left. I'll give it another day and hopefully after a period of time it will start reflecting a true number.
I have also emailed Seidio support directly on the issue.
So as an update, seidio is going to be sending along a new battery to see if that solves the issue. I guess we will see!
Sent from my MB855 using Tapatalk
Keep us posted and let us know how it goes.
Sent from my MB855 using XDA App
Don't know if said already but used battery monitor widget pro can be found on apktop or 4shared if can not find it let me know
Sent from my MB855 using Tapatalk
For free?
Sent from my MB855 using XDA App
cubexg said:
So as an update, seidio is going to be sending along a new battery to see if that solves the issue. I guess we will see!
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
Any luck on the new battery? Just noticed my extended battery is doing the same thing. :-(
So things still aren't working right. Battery shows 1 percent for half my day and the Photon just doesn't know. However, I read a thread on Amazon about a generic extended battery and someone suggested using Battery Monitor and using Voltage Based monitoring. Its certainly not perfect but it gives you a somewhat accurate reads on remaining battery. I truely wonder if this is OS or a hardware limitation.
Oh well.
Sent from my MB855 using Tapatalk
Why doesn't anyone wipe the battery stats from recovery (only available if you have CWM recovery)?
kusanagi-sama said:
Why doesn't anyone wipe the battery stats from recovery (only available if you have CWM recovery)?
Click to expand...
Click to collapse
I did with bootstrap recovery this morning, no difference. Sitting at 1% for the last couple of hours.
budney said:
I did with bootstrap recovery this morning, no difference. Sitting at 1% for the last couple of hours.
Click to expand...
Click to collapse
Maybe this is an Android issue, I've read the LG Optimus S has the same problem with extended batteries.

3200mah battery works great, however...

... I just have some things I'd like a little assistance with if possible.
1. Because the battery has over double the capacity of the stock battery, I wasn't expecting even close to sensible battery reports from Android. However, I wasn't expecting it to last for a long time, drain at a rational rate, and then halt at 1% for 6 or so hours. I have no way of predicting how much time I have left when I reach that 1% mark, and it literally just shuts off the phone without warning, as if I just unplugged the battery. Is there any way to adjust anything so that It properly reports the battery charge value from 100-1%?
2. I have no idea how long to charge this phone. Obviously the stats of the stock battery are hardcoded into the OS; after the phone shuts off, I'll put it on to charge, it will enter the charge-only-mode (which is weird to me in itself, thought the custom bootstrap overwrote this?), and it will only take a couple hours to reach 100%. This is about how long it took for me to charge the stock battery. Anyway to have the phone properly display the current charge while in its charge only state? I'm afraid of not properly cycling the battery if I don't charge it long enough, or even worse, damaging the battery by charging too long. After it hits 100%, assuming I am correct in that it still needs to charge after reaching that mark, will the phone even accept more power from the charger? As silly as it might sound, that sorta made sense to me. If the phone is incorrectly measuring the battery at that point, shouldn't it cease to charge after reaching what it thinks/I] is a proper 100%?
3. If there is no way to fix the issue in #1, I read somewhere you can measure the voltage of a battery and know when the phone is fully charged or about to die based on that voltage? At least I think it was voltage.
I've calibrated, don't bother asking. That has never worked, even on stock; I'm convinced its a myth, but that's a discussion for another thread.
By the way, Eclipse ROM's battery life sucks. Anyone stating otherwise is misinformed. The best battery life I ever experienced was on stock 2.2, followed very closely by Liberty 3 ROM. I have no idea why Eclipse has such terrible battery drain, though I would be interested if anyone knows. I've gone through two phones, their respective batteries, and now my third battery, the monstrosity that is the 3200mah, so please don't bother trying to convince me that Eclipse has better battery than some alternatives. It sucks. I'll be downgrading back to 2.3.4 and flashing Liberty right after I finish writing this.
Thanks to anyone who can help!
Also, I've been following the Droid X2 bootloader status for like 6 months. Realistically, how close are we to being able to flash a new kernel? An I'm pretty sure we can't crack to bootloader anyways. I remember calculating the possible combinations of keys Motorola could have used; it was a massive number. In that case, how would hijacking the boot process allow us to use Cyanogen? If we can't crack the bootloader and then flash the CM kernel, wouldn't it just be a glorified version of Eclipse? I don't even like Eclipse. Lawl.
I'm done typing. My sexy computer comes tomorrow; crossfire 6990's here I come! Need to get to sleep so I can all-night-hardcore-no-life play BF3 with Shibby tomorrow. I hope someone on these forums knows who that is.
You need to boot into clockwork recovery. Go to advanced and hit clear battery stats. after that fully charge and discharge your battery 4 times and that should fix you up.
Sent from my SGH-T959V using XDA App
Oh sorry. Didn't realize cw hasn't been released for your phone yet. Have you tried deleting the batterystats.bin file manually. I believe there is also an app for this on the market.
Sent from my SGH-T959V using XDA App
I have the same battery that you do with this phone, although I don't use the phone anymore.
You can NOT make Android read the battery correctly. You are in the dark.
Calibrating will NOT, as you've already found out, fix battery reporting.
I used to gauge when it was going to die by looking at mV left. Around 3500mV is when it would die. Get Battery Indicator from market to find out mV.
Oh, and: 4.2V = 4200mV etc
hampsterblade said:
Oh sorry. Didn't realize cw hasn't been released for your phone yet. Have you tried deleting the batterystats.bin file manually. I believe there is also an app for this on the market.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I appreciate the understanding you have of my situatition, for, clearly, you have thoroughly read what I wrote.
donlad said:
I have the same battery that you do with this phone, although I don't use the phone anymore.
You can NOT make Android read the battery correctly. You are in the dark.
Calibrating will NOT, as you've already found out, fix battery reporting.
I used to gauge when it was going to die by looking at mV left. Around 3500mV is when it would die. Get Battery Indicator from market to find out mV.
Oh, and: 4.2V = 4200mV etc
Click to expand...
Click to collapse
I figured as much. For a multi-billion dollar investment, you would think Google and its partners wouldn't overlook something so silly, not to mention locking our ****ing bootloader.
Anywho, I'll try out that app. Is 4.2V a full charge for the 3200?
Thanks!
This is a known issue with the droids. Some have had success with the batteryleft widget which can learn the full capacity of the battery.
Also not googles fault. This one is only Motorola's issue.
Sent from my SGH-T959V using XDA App

Categories

Resources