Skype with video on Froyo ? - Streak 5 Themes and Apps

Any experience about this? I see, there is a modded froyo version functioning with Streak 5, but not with the frontcam. Any news?

I tried the last Skype (froyo) build, no success. The rear cam works fine but the front not.

In order for it to work on froyo, someone would have to write specific code to interact with the driver.

I'll point out that I DID have it working in GingerBread, more specifically the GingerStreak build with one of Fards' kernels flashed, but what currently sucks is that sensors don't yet work with those kernels, including but not limited to the accelerometers, which means everything is stuck in landscape.
Soon enough though, it might be a very compelling reason to upgrade to Gingerbread, if Fards' kernels get good enough.
*(and if I wasn't clear enough, by working, I mean that I had the FFC working)

New Skype APK 2.0
I have read that some have had this working on streakdroid....I am wondering if anyone has this working on stock 354?
http://forum.xda-developers.com/showthread.php?p=15748327#post15748327

It works with the front facing cam now, here's the link
http://forum.xda-developers.com/showthread.php?p=15748327#post15748327
The only issue I've run into thus far, is that I'm not able to tx audio.
I posted in the forum, so hopefully droidrx can fix/enable it.

Video working on SimpleStreak 1.2
I am also getting audio on both ends.
100% working AFAIK!

nickshertzer said:
Video working on SimpleStreak 1.2
I am also getting audio on both ends.
100% working AFAIK!
Click to expand...
Click to collapse
Which one is working for you?

lordmorphous said:
Which one is working for you?
Click to expand...
Click to collapse
The version from the linked post.
Direct: http://forum.xda-developers.com/attachment.php?attachmentid=674610&d=1312294853

Has anyone tried the new 2.1 official version of Skype on the Streak yet?

So I got the one from Smokey's link to install and open but whenever I try to log in, it says that Skype cannot log me in and try later (or something like that). I know I'm using the right username and password because I can log in on the PC. Any ideas on what I need to get it to work? I'm on Steve's 1.9. I had no problem with the official Skype version but of course, only the rear camera worked on that one. Thanks.

Try again later...it worked for me. Or keep trying. Maybe try via wifi or 3g, depending on how you got started.

@undrwater: you mean you got the same message and you tried later and then it worked? After that, did it stay working or did you end up getting that error message again? I'm on prepaid and don't get 3G. I only have wifi. Does it work with wifi?

Related

[Q] Anyone tried the MLB 2011 app yet?

The lite version works, just wondering if the full version works.
Full version working for me... I haven't tried streaming live data yet, but the basic functions of the app work.
Full version works for me. I was streaming a brewers broadcast yesterday.
Works for me. I have a hard time getting into spring training games though.
+1 it woks
Looks pretty cool.
If we have mlb subscription and our Evo's get internet with flash, do we need the app?
Can we watch live games without it?
tomtbone said:
Full version works for me. I was streaming a brewers broadcast yesterday.
Click to expand...
Click to collapse
I didn't see the mlb.tv option anywhere. I'm running CM7. For people who have gotten it working, are you using Nookie Froyo? Auto Nooter? I tried editing the build.prop on CM7 to spoof a Tab, but it didn't seem to work.
For the time being, I was able to get the mlb.tv website working pretty well through Opera on CM7. That'll do, if nobody can come up with repeatable steps to get it working through At Bat, but I'd love to be able to do it through the app if possible.
I'm running CM7 and the full version works with pitch by pitch and audio broadcasting. I also have a MLB.TV subscription and can watch vlive video on the Motorola Droid X. Live video didn't work on the NC. I got the video working through Playon though. Video quality is excellent over my wifi! Watching the cards game right now even though it's on ESPN.
Same here, playon works, DROID2 works, everything works fine but no video option. Running CM7 with the tablet mods. Thinking it's either the app detecting it isn't an approved device or something with flash.
Playon with CM7, video is working for me!
It's said to work fine with the verizon galaxy tablet. I think if we can make it think that it's that tablet, it might work. Is that the Build.Prop that controls that? Anyone know the build.prop string for the Verizon Galaxy Tablet?
jkabaseball said:
It's said to work fine with the verizon galaxy tablet. I think if we can make it think that it's that tablet, it might work. Is that the Build.Prop that controls that? Anyone know the build.prop string for the Verizon Galaxy Tablet?
Click to expand...
Click to collapse
Yeah, that's what I meant in my post above. I changed the following in the build.prop:
ro.build.fingerprint=google/passion/passion:2.3.3/GRI40/102588:user/release-keys
to
ro.build.fingerprint=samsung/GT-P1000/GT-P1000/GT-P1000:2.2/FROYO/XXJJ3:user/release-keys
But it didn't seem to have any effect. One thing that occurred to me this morning is that perhaps I should try downloading it with that build.prop in place (as opposed to downloading it with the original one, switching the build.prop, and then opening it.) Perhaps the market serves up a different version when you download it using one of the approved devices.
I'd love to hear from someone who has streaming through the At Bat App working on their Nook. Until I hear more info, I'm dubious.
I will give it a shot tonight. I'll trying changing it and then reinstalling it straight from the market. Will try using the apk from my DROID2, it has working video.
Tried both ideas out, no go.
I wonder if there's more of the build.prop that needs to be changed in order to properly spoof it as a Tab. Anyone have any experience in editing build.prop files for other reasons?
There is someone in the Galaxy Tab forums that clamins they got it working on non certified devices. I'll post if I can find out what he did.
Definitely report anything you find, jkabaseball. I've seen you posting in a few other related threads, and appreciate that you're as dedicated to figuring this out as I am.
Works great on Cm7. W/tablet tweaks, latest build...(has been working on last few builds) w/video, the Astros are Horrible Again, and Mark Texeira is still doing what he does best up in NYC...Go Yanks!
Sent from my PC36100
I got the CM7 w/ tab tweaks. You saying the video works on it from MLB At-Bat 11?

[Q] Has anyone installed Honeycomb a2.1

If so have you found anything that was not working on it? I am currently running VEGAn Ginger and want to try the HC but I want to know what is not working before taking the time to nvflash and install new ROM.
No, but
Many things are still not workin, but there are great improvements daily. I think it wont be long to say a stable beta version.
So i would suggest to be patient and wait till the beta is out
Thanks, I will stay with VEGAn for now until then.
I loaded a2.2 and it is pretty good. They updated the email apps in a2.3. The only things now not really working are hd video, camera, flash (not sure if flash is working in further updates). Overall, for me the things that are missing are already missing in vegan rc1 (hd video and camera) so I am gonna stay with honeycomb and continue updating as new updates come out. It is nice and streamlined.
Been running every iteration. I've stuck with a2.1 now for a bit.
After this update, they have the overclocking kernel back in place and my gtab hates that. So I reverted back to 2.1, and then just copied the working email and gmail apps over.
Just missing the flash, who cares about the camera.
Came from Vegan Ginger, so the only thing this doesnt have over that is the working flash. But to be honest, its been a lot more stable than ginger ever was.
jetguy35 said:
I loaded a2.2 and it is pretty good. They updated the email apps in a2.3. The only things now not really working are hd video, camera, flash (not sure if flash is working in further updates). Overall, for me the things that are missing are already missing in vegan rc1 (hd video and camera) so I am gonna stay with honeycomb and continue updating as new updates come out. It is nice and streamlined.
Click to expand...
Click to collapse
When you update do you have to reflash the tablet?
Where can I get the honeycomb build for the point of view tablet,
http://cgi.ebay.com/140549831346?ru=http%3A%2F%2Fshop.ebay.com%3A80%2Fi.html%3F_from%3DR40%26_trksid%3Dp5197.m570.l1313%26_nkw%3D140549831346%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1#ht_4538wt_1065
Quick Update:
I installed a2.2 and it is crazy fast. 1900 quadrant before OC 2900+ after OC. Only caveat is the wifi crashes and the camera issues. Waiting for RC now.
zack407 said:
Quick Update:
I installed a2.2 and it is crazy fast. 1900 quadrant before OC 2900+ after OC. Only caveat is the wifi crashes and the camera issues. Waiting for RC now.
Click to expand...
Click to collapse
You need to update to 2.4 - a good bit was fixed. Still no camera or OpenGL, but almost everything I need is fine as wine!
(I still am not happy with Asus-based 3.X yet - hoping for an Acer-based version 2.5 or something higher ... or version 4)
acid123 said:
Where can I get the honeycomb build for the point of view tablet,
http://cgi.ebay.com/140549831346?ru=http%3A%2F%2Fshop.ebay.com%3A80%2Fi.html%3F_from%3DR40%26_trksid%3Dp5197.m570.l1313%26_nkw%3D140549831346%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1#ht_4538wt_1065
Click to expand...
Click to collapse
Pretty sure that is just running the Adam or Bottle of Smoke ROM.
The 3.01 they reference is the Honeycomb version, the 2.X referred to here is version of the Bottle of Smoke mod by Roebeet.
Bottle of Smoke
Just got it running today. It took me several hours to figure out the process, but I have successfully loaded the software. I am running Smoke Alpha 3.3. I am experiencing problems with wifi which seems to only be available for about 10-20 minutes. Once it stops working I have to restart the system. I can't scan or restart wifi from with in settings. I did get vulkano to work but it to locked up when I tried to change channels. I couldn't get Dolphin HD to work -- it loads but won't render any web pages, but Firefox beta (5) seems to work just fine. For some reason I can't download opera 11 from the market but other apps install with not problem. I have tried a few basic games (for the grand kids) and they seem to be working ok.
Does anyone know if Netflix is working for Bottle of Smoke??
Not on my viewsonic. You can access your queue but you can't view any videos.
johnqfig said:
Just got it running today. It took me several hours to figure out the process, but I have successfully loaded the software. I am running Smoke Alpha 3.3. I am experiencing problems with wifi which seems to only be available for about 10-20 minutes. Once it stops working I have to restart the system. I can't scan or restart wifi from with in settings. I did get vulkano to work but it to locked up when I tried to change channels. I couldn't get Dolphin HD to work -- it loads but won't render any web pages, but Firefox beta (5) seems to work just fine. For some reason I can't download opera 11 from the market but other apps install with not problem. I have tried a few basic games (for the grand kids) and they seem to be working ok.
Click to expand...
Click to collapse
Except for Opera, all of those are (well) documented issues. Read through the last 10-20 pages in Roebeet's BoS thread at Slatedroid and you will see many other people talking about the same things.
johnqfig said:
Just got it running today. It took me several hours to figure out the process, but I have successfully loaded the software. I am running Smoke Alpha 3.3. I am experiencing problems with wifi which seems to only be available for about 10-20 minutes. Once it stops working I have to restart the system. I can't scan or restart wifi from with in settings. I did get vulkano to work but it to locked up when I tried to change channels. I couldn't get Dolphin HD to work -- it loads but won't render any web pages, but Firefox beta (5) seems to work just fine. For some reason I can't download opera 11 from the market but other apps install with not problem. I have tried a few basic games (for the grand kids) and they seem to be working ok.
Click to expand...
Click to collapse
which version, where did you get it, link please and what was the process?

Skype Video working on Streak 5

I am probably late to the game but didn't see this anywhere so thought I would just mention - I just flashed this Gingerbread based ROM real quick http://forum.xda-developers.com/showthread.php?t=1092565 and then flashed the APK mentioned here http://www.xda-developers.com/android/skype-2-available-for-other-devices/ and made a quick test call from my netbook to my Streak - It wasn't perfect (could be due to slow network connection and not doing a clean install of the new ROM) but anyway, it did work.
So I just did a quick video call to my parents and confirmed that it works very well - I was also able to switch from the front camera to the back camera.
Asking because I don't know; What is the difference between Skype and Fring? Fring all day with my kids and seems to be the same as what you just did with your parents.
do you need gingerbread for this to work?
yes, I believe so you need gingerbread for this.
hopefully they will eventually release an app for those of us with devices still stuck on official 2.2
Fring is a cool app but I am not sure if they have a desktop version - I have only used it once on a friend's phone. Frankly I have been using Oovoo for some time now to call my parents and it has worked great, but I have MANY more contacts who use Skype and didn't feel like spending the time or energy to try and get them all to switch.
Yes - for sure you need Gingerbread - I took a stab at installing it on Streakdroid 1.9 but it was a no go. As soon as I installed the above ROM and then installed the APK it worked.
As a side note the above ROM seems to be working great - I had been planning to install DJ Steve's Gingerbread ROM but will have to wait until I have some time.
johnpmorton said:
Fring is a cool app but I am not sure if they have a desktop version - I have only used it once on a friend's phone. Frankly I have been using Oovoo for some time now to call my parents and it has worked great, but I have MANY more contacts who use Skype and didn't feel like spending the time or energy to try and get them all to switch.
Yes - for sure you need Gingerbread - I took a stab at installing it on Streakdroid 1.9 but it was a no go. As soon as I installed the above ROM and then installed the APK it worked.
As a side note the above ROM seems to be working great - I had been planning to install DJ Steve's Gingerbread ROM but will have to wait until I have some time.
Click to expand...
Click to collapse
i did on steves gingerbread....dont work. force close.
What would happen if I just change my build.prop to read version 2.3.3?
Are there other areas of the phone that confirm gingerbread?
rsalib said:
What would happen if I just change my build.prop to read version 2.3.3?
Are there other areas of the phone that confirm gingerbread?
Click to expand...
Click to collapse
My guess is it would force close - just changing the version doesn't actually make it Gingerbread so there would be compatibility issues. I will check later since I am going to be playing around with another Streak tonight.
Yep - force close.

[Q] Anyone got Skype with video going yet?

Not holding my breath for this one but at least they have finally released something. Read there were a couple of hacks working but then needed 2.3
Anyone tried it on the Streak yet?
This has been discussed in the apps section
http://forum.xda-developers.com/showthread.php?t=1150877
But to answer your question, yes, video call works if you install Gingerstreak and the hacked apk. However, keep in mind Gingerstreak is not yet a reliable ROM. My wife's Streak on stock 354 does not show the video call option.
Sticking to the stock rom so I will keep my fingers crossed that this is the start of things to come and they will eventually support 2.2.
Cheers
mingonn said:
Sticking to the stock rom so I will keep my fingers crossed that this is the start of things to come and they will eventually support 2.2.
Cheers
Click to expand...
Click to collapse
Not gonna happen... hopefully DJ_Steve will get GingerStreak stable but Skype won't be releasing a version for Froyo
Hi Skype video is working on my dell streak running stock 2.2.2. and rooted with gingerbreak - BUT only rear camera works - still its a start and if that was fixed it would all be fine - video and sound are normal. Used the apk for the froyo version that is here on the forum
Try ooVoo...it is the only app which allows android to PC video calling. But supported on very few devices.
kzintz said:
Hi Skype video is working on my dell streak running stock 2.2.2. and rooted with gingerbreak - BUT only rear camera works - still its a start and if that was fixed it would all be fine - video and sound are normal. Used the apk for the froyo version that is here on the forum
Click to expand...
Click to collapse
Is that different than the market version?
I searched, but I didn't find it.

CM10 on Atrix 4G

Sorry to put this in General but I haven't met the requirements to post elsewhere and hopefully someone will see this .
I've been keeping up with the Atrix 4G CM10 Mod and have to say great work so far. The latest version fixes most of the issues I've seen in the past including the Camera and random reboots.
Few things it doesn't fix that may be either app developer issues, issues with the mod itself, or something I'm not thinking of; Netflix doesn't work , Triple Town (and some other games) don't work (I think this is due to hardware accel, but they work on my Flipside so I'm not sure that matters much).
Anyways just wanted to say thanks, and great work. Can't wait for the next update.
- Jeremy
jdarling said:
Sorry to put this in General but I haven't met the requirements to post elsewhere and hopefully someone will see this .
I've been keeping up with the Atrix 4G CM10 Mod and have to say great work so far. The latest version fixes most of the issues I've seen in the past including the Camera and random reboots.
Few things it doesn't fix that may be either app developer issues, issues with the mod itself, or something I'm not thinking of; Netflix doesn't work , Triple Town (and some other games) don't work (I think this is due to hardware accel, but they work on my Flipside so I'm not sure that matters much).
Anyways just wanted to say thanks, and great work. Can't wait for the next update.
- Jeremy
Click to expand...
Click to collapse
Just tried it but I'm going back to Turl's CM9 which I've been using for a month now. CM10 isn't quite as refined as CM9 atm, CM10 doesn't allow for transitions also the crt animation isn't functioning along with GPS(which also isn't working in CM9 for me), on the bright side Google now worked good on CM10 and is pretty cool.
Camcorder is working? Do Chrome tabs work?
yeahmann said:
Camcorder is working? Do Chrome tabs work?
Click to expand...
Click to collapse
Video is not working in the native camera app but you can apparently download a camera app in the maket to take video. Chrome tabs still crash the app. Neither of these will probably be able to be fixed until we get official drivers from ICS update.
Arichman said:
Video is not working in the native camera app but you can apparently download a camera app in the maket to take video. Chrome tabs still crash the app. Neither of these will probably be able to be fixed until we get official drivers from ICS update.
Click to expand...
Click to collapse
Seems to depend on who you are, the Camera and Camcorder work fine for me under CM10 with the native camera application. Though it does crap out from time to time. I've had better luck with Pudding Camera being stable.
As for tabs, don't know, will have to look to see if they are working when I get home.
- Jeremy
Whitout acceleration, ICS or JB is useless =/ (no video cam, no 720p video playback)
Whaiting for the official one ^^ (It will be crapy but our deves will mod it)
I know, my english is terrible!
I have jokersax CM10 and my issues so far are:
-When the camera takes a picture with the flash on, the image is overlayed with a heavy green tint, also happened in CM9
-Cant see internal SD storage in Win7.
-Video worked at first (with delay) but now crashes with some gallery error.
-Can't get GPS to work but I'll try GPS test outside in a few minutes
-The animations are smooth but sometimes do this weird little jump back at last couple of frames, doesn't really bother me.
My battery life seems better than the CM9's I tried and the phone has been using deep sleep with CM10. That said, both 9 and 10 use noticeably more battery than CM7.
I also had issues with GPS on CM 9/10. I tried all the common fixes. Even going back to a blur-based ROM didn't fix it. Finally flashed my radio to 36P and now the GPS locks in seconds.
Jokersax CM10 JB 0.2 !!
Hi Guys,
I being a noob, installed Jokersax's CM10 JB 0.2 version yesterday. Had some nervous moments :fingers-crossed: when I soft bricked my phone. But finally recovered from that and could install JB. The following are my observations;
Working:
1) Camera
2) GPS
3) Google Now works. Awesome !! Very quick and to the point.
4) Music play back on phone speaker
5) DLNA works. Tested with Skifta and iMediashare
Not working: (Driver issues and app issues)
1) Chrome not working properly. When I zoom in, it crashes
2) Camcorder - recorded a short video snippet. But the file vanished from the gallery. Not able to find it or it did not record at all !!
3) Finger print
4) Stuttering slightly when moving from one desktop to another
5) No Webtop
6) XDA developer app
Will update this post when I do further tests
Thanks again to CM10 developers, Jokersax and to all those who have helped in getting this ROM to this level.
Why post this here? These issues are already well-known and documented.
nh777 said:
Why post this here? These issues are already well-known and documented.
Click to expand...
Click to collapse
Sorry nh777 and all. In the excitement of having JB, did not analyse the thread.
I'm very pleased with CM10 Epinter. The small bugs and video camera not bother me so much as to not use more CM10. Bring on the libs official logo.
Amazing rom and theming questions
I have installed CM10 on my Motorola Atrix from Emerson Pinter and found that it works amazingly. Some minor issues involving the camera, gps, and sometimes frame lags, but other than that, it seems to be a pretty stable build. Battery is amazing compared to most other roms. I get a 25 hour battery! Thanks EPinter! I just have one question and hope someone can help me, even though it doesn't exactly pertain to this topic. You know when you are at the lockscreen, you tap the lock and you can slide it to wither camera or unlock? Well, I was wondering if I could change the little dots in the background, maybe change the color or something along those lines. Does anyone have any information on that?
Thanks,
Luca
jdarling said:
Sorry to put this in General but I haven't met the requirements to post elsewhere and hopefully someone will see this .
I've been keeping up with the Atrix 4G CM10 Mod and have to say great work so far. The latest version fixes most of the issues I've seen in the past including the Camera and random reboots.
Few things it doesn't fix that may be either app developer issues, issues with the mod itself, or something I'm not thinking of; Netflix doesn't work , Triple Town (and some other games) don't work (I think this is due to hardware accel, but they work on my Flipside so I'm not sure that matters much).
Anyways just wanted to say thanks, and great work. Can't wait for the next update.
- Jeremy
Click to expand...
Click to collapse
lucasantarella said:
You know when you are at the lockscreen, you tap the lock and you can slide it to wither camera or unlock? Well, I was wondering if I could change the little dots in the background, maybe change the color or something along those lines. Does anyone have any information on that?
Click to expand...
Click to collapse
Wouldn't a different theme do that?
Sorry for reviving an old thread (I thought it would be better than not using the search function) but where can I get the latest version of cm10? I mostly need a functioning camera again which this jokersax ROM doesn't seem to have working.
I understand that Motorola has pretty much killed off any hope of a fully functional jb but I only want a working camera.
IncredibleBulk92 said:
Sorry for reviving an old thread (I thought it would be better than not using the search function) but where can I get the latest version of cm10? I mostly need a functioning camera again which this jokersax ROM doesn't seem to have working.
I understand that Motorola has pretty much killed off any hope of a fully functional jb but I only want a working camera.
Click to expand...
Click to collapse
http://cleanimport.xda/index.php?threads/1781970/
Framework-res.apk & Camera Issues
No. I have tried so many themes and none of them have made a difference. I forget where, but I read an article that the image was in framework-res.apk. Any help? On a side note, my camera on JellyBean has been REALLY bad. Is that a result of unofficial drivers? If anyone has a fix for any of these issues, please please please contact me!
Thanks.
ravilov said:
Wouldn't a different theme do that?
Click to expand...
Click to collapse
lucasantarella said:
No. I have tried so many themes and none of them have made a difference. I forget where, but I read an article that the image was in framework-res.apk. Any help? On a side note, my camera on JellyBean has been REALLY bad. Is that a result of unofficial drivers? If anyone has a fix for any of these issues, please please please contact me!
Thanks.
Click to expand...
Click to collapse
Sorry, my bad, I only just realized the theming engine cannot theme the lockscreen. It's a known limitation of the engine.
You could always decompile your framework-res, find and change the relevant file, and then compile it back...
Audio over bluetooth (Epinter CM10 20121011)
Hi guys,
I wanted to post this in the dev thread but was not able to do so as I do not have the required minimum 10 posts.
I am using Epinter's CM10 Oct 11th version. I am having a small issue with it.
I am not getting audio over bluetooth. Does anyone else facing the same problem?
I tried to un-pair and re-pair, reboot etc. But nothing worked.
It would be great if any one can solve the issue.
Thanks,
Trying to get to 10 posts so sorry if already mentioned...
On Jokersax latest CM10 build and have a camera issue as well, no preview of what I am taking, it seems to take a picture as I can see thumbnail afterwards, but cannot view the thumbnail or change location for default directory... Only bug I found so far, less than 12 hours testing...

Categories

Resources