X10 Bluetooth issues - XPERIA X10 Q&A, Help & Troubleshooting

Hi all,
I'm having weird bluetooth issue. if I connect headset voice call then it stay connected all day but if use it music stream then it shutdown after 10-15 min automatically. I'm stock ROM 2.1A.0.435 Baseband 2.1.54

i have this problem with 2.2 roms and ewjet roms. something with froyo sources. never seens this on any 2.1 roms other than ewjets, but i've never used a stock 2.1 after .492
you can try changing some settings at /system/etc/bluetooth(may also be bluez)/audio.conf
lines you can try changing is:
Code:
Enable=Sink,Control
Disable=Headset,Gateway,Source
try changing to
Code:
Enable=Sink,Control,Headset,Gateway,Source
#Disable
and
Code:
#AutoConnect=True
try changing to
Code:
AutoConnect=True
i've had mixed results with doing this, but i know it's worked on samsung devices. so who knows if it will work for you or not. what i ended up doing is this:
delete the pair
turn off bluetooth and the device
turn on bluetooth and put the device in pairing mode
pair them
turn off the device, but leave bluetooth on
go to settings>wireless>bluetooth settings
longpress the device and go to options
untick "phone"
turn on the device and let them connect
wait a few seconds and retick "phone"
it should work after that
however, everytime you disconnect, you will need to untick "phone" after you disconnect and retick after you reconnect. you may also get a cut in audio every 45 seconds or so. it's annoying, but it's the only way i can listen to music while i drive.

svtfmook said:
i have this problem with 2.2 roms and ewjet roms. something with froyo sources. never seens this on any 2.1 roms other than ewjets, but i've never used a stock 2.1 after .492
you can try changing some settings at /system/etc/bluetooth(may also be bluez)/audio.conf
lines you can try changing is:
Code:
Enable=Sink,Control
Disable=Headset,Gateway,Source
try changing to
Code:
Enable=Sink,Control,Headset,Gateway,Source
#Disable
and
Code:
#AutoConnect=True
try changing to
Code:
AutoConnect=True
i've had mixed results with doing this, but i know it's worked on samsung devices. so who knows if it will work for you or not. what i ended up doing is this:
delete the pair
turn off bluetooth and the device
turn on bluetooth and put the device in pairing mode
pair them
turn off the device, but leave bluetooth on
go to settings>wireless>bluetooth settings
longpress the device and go to options
untick "phone"
turn on the device and let them connect
wait a few seconds and retick "phone"
it should work after that
however, everytime you disconnect, you will need to untick "phone" after you disconnect and retick after you reconnect. you may also get a cut in audio every 45 seconds or so. it's annoying, but it's the only way i can listen to music while i drive.
Click to expand...
Click to collapse
Thanks for reply I'll try this. I am waiting for the stock 2.3 to come out flash my phone a lot of hassle to put home they way want
This happening with all bluetooth device mw600, my car stereo steaming

Related

Can not activate Bluetooth

Since two days I got the problem, that I can not activate Bluetooth anymore. On the settings "Wireless & network setting" I press the Bluetooth activation (Turn on Bluethooth). The status changes to "Turning on ... " for about 10 seconds, but doesn't turn on. Before was working fine, I do not remember to have something deleted.
It seems to me, as if Bluetooth is switched off (or disabled) by some application.
Would like to isolate the problem. Any ideas how I can find out.
- Log file
- command line
- etc
1.ATRIX-in-PT said:
Since two days I got the problem, that I can not activate Bluetooth anymore. On the settings "Wireless & network setting" I press the Bluetooth activation (Turn on Bluethooth). The status changes to "Turning on ... " for about 10 seconds, but doesn't turn on. Before was working fine, I do not remember to have something deleted.
It seems to me, as if Bluetooth is switched off (or disabled) by some application.
Would like to isolate the problem. Any ideas how I can find out.
- Log file
- command line
- etc
Click to expand...
Click to collapse
Do you have anything frozen through titanium backup? Have you installed any apps that use Bluetooth? I had an issue with car home locking my Bluetooth up when I undocked it. Telling Car home to turnoff Bluetooth once disconnected fixed mine. If all else fails and you cant figure it out, I would try flashing back to 1.57 and then OTA update it back to 1.83. Last resort of course so you don't have to set your phone back up, titanium backup can make this process easier.
If nothing works then may be a hardware issue. Best of luck.
Just wait before you get into it, another person may have better advice!
Dirtburgler said:
Do you have anything frozen through titanium backup? Have you installed any apps that use Bluetooth? I had an issue with car home locking my Bluetooth up when I undocked it. Telling Car home to turnoff Bluetooth once disconnected fixed mine. If all else fails and you cant figure it out, I would try flashing back to 1.57 and then OTA update it back to 1.83. Last resort of course so you don't have to set your phone back up, titanium backup can make this process easier.
If nothing works then may be a hardware issue. Best of luck.
Just wait before you get into it, another person may have better advice!
Click to expand...
Click to collapse
Hi. I installed a Bluetooth Transfer app. This was the reason, why I found out that Bluetooth wasn't working anymore. But I know for sure that Bluethooth was running fine, just a few days ago.
I really would like to find the reason, quite sure there is a software reason, and defenitly do not want to flash back.

[Q] How do I get Bluetooth to connect automatically?

Running ICScrewed 2.0.1 and I've been running into a problem over the last few roms I've flashed where my Bluetooth doesn't auto connect.
I have a Jabra Cruzer 2 bluetooth speaker in my car that I've paired with my phone. Tasker is setup to start a menu system when the bluetooth connection is established....but it never happens. I have to go into the BT menu and press on the Jabra device to make it connect. By default it shows "Paired" so I press it and it changes to "Connected".
I know when I had UnNamed previously it was auto connecting everytime I would jump in my car and hit the connect button on the Jabra. It hasn't worked that way since I've gone away from UnNamed. I even tried going back to it and now it doesn't work.
I've checked the Jabra and there's nothing to the settings so I'm 99% sure it has nothing to do with the device.
Does anyone know of a place to tell it auto connect when detected?
Followup question,
I also can't get phone calls to go over the bluetooth device either. Is there special place to look to make sure calls go over bluetooth by default?
Thanks everyone for your responses.
You may have to re pair the device. Did you restore bt pairings when you changed ROMs? That can cause no end to problems, especially when they are different bases.
I have the same Jabra and it connects every time I press the talk/end button on the unit.
Sent from my SGH-I777 using XDA App
I may have somewhere along the line Titaniumed the BT pairing back. But my most recent flash of ICScrewed was preceded by wiping dalvick, clear cache partition, and wipe before installing full. So I'm not sure how anything would have come over unless there was a folder somewhere with bad data.
Is there a folder I should clear out and pair from scratch?

SGSII and bluetooth

I have a weird problem with my SGSII. If i connect my phone to my car bluetooth with the car charger, it stay connected for as long as I am in the car. If however i connect to the car on battery, once the screen turns off I lose bluetooth connect. I have tried changing the screen time and that didn't work, I also tried making my bluetooth visable always and that also didn't work. Can't understand why it only happens while on battery.
Any suggestions?
I have the same issue with bluetooth on my SII.
Whenever the screen is asleep bluetooth devices will not connect, I have to turn the screen on to allow the devices to connect.
I've setup auto pairing in the linkkeys file which works fine if the screen is on (so no prompts to pair devices, just works).
The main device I want to use is a liveview, which I understand has problems, but I've tested other devices and the phone seems to be at fault.
It can't be designed that bluetooth will only connect if your using your phone, kinda defeats the purpose of most bt devices.
tried making my phone always visible, and even tried disabling the lock screens.
using CM7 stable, and a fix would be highly appreciated!
Hmmm.... I don't have that problem.
Maybe some weird power save option?
that's what I was thinking, but I've not been able to find any settings on the phone or through google.
I've just updated to the latest cm7 nightly and the problem seems to be the same. It has an addition bluetooth setting called 'Fast Connections' but this doesn't seem to change anything.
The only other thing I've noticed is that the linkkeys file that I edited to allow the liveview to auto pair (without me having to pull down the notification bar nad authorise it) seems to keep re-editing the file so the phone prompts to pair, so I'm assuming now that's the issue rather than a power thing, so how to prevent that?

bluetooth HF issues

Hi all,
I have problem with BT HF lately. When my i9100 connect to the handsfree, it partially freeze. The only thing I can do is to extend notification menu. When i turn off the screen with power button and turn it on, it becomes very dimmed. After a minute or so it makes kind of hot restart - every app starting again.
It started to happen after the rom upgrade from stock 4.0.3 to 4.0.4 (XWLPW).
Does anybody know, what can cause this?
hbr7 said:
Hi all,
I have problem with BT HF lately. When my i9100 connect to the handsfree, it partially freeze. The only thing I can do is to extend notification menu. When i turn off the screen with power button and turn it on, it becomes very dimmed. After a minute or so it makes kind of hot restart - every app starting again.
It started to happen after the rom upgrade from stock 4.0.3 to 4.0.4 (XWLPW).
Does anybody know, what can cause this?
Click to expand...
Click to collapse
u can try this ma8.
go to settings>apps there under ALL tab find the bluetooth app, delete Data/cache of the same, then reboot ur phone and try connecting the BT HF again and see
the sineost
Sun90 said:
u can try this ma8.
go to settings>apps there under ALL tab find the bluetooth app, delete Data/cache of the same, then reboot ur phone and try connecting the BT HF again and see
Click to expand...
Click to collapse
Unfortunatelly it gave nothing. Nevertheless, I found it happens only during contacts/call history sync. There is no freeze when I deny sync prompt.

[Q] Bluetooth auto-pairing

Anyone having issues with automatic pairing?
I can't get the phone to hook up with my car automatically, I have to manually hit the device on the phone to get it connect (no problems when connecting manually) everytime I start the car.
I'm coming from a Lumia 920 so I'm not sure if there's a setting somewhere I missed.
Cheers!
i
arrrgh said:
Anyone having issues with automatic pairing?
I can't get the phone to hook up with my car automatically, I have to manually hit the device on the phone to get it connect (no problems when connecting manually) everytime I start the car.
I'm coming from a Lumia 920 so I'm not sure if there's a setting somewhere I missed.
Cheers!
Click to expand...
Click to collapse
try using Smart Connect App or similar app
and define this; when bluetooth On >> connect to X bluetooth device.
however phone should do it automatically! maybe it s problem in ur firmware;
try repairing ur firmware by PCC
:good:
arrrgh said:
Anyone having issues with automatic pairing?
I can't get the phone to hook up with my car automatically, I have to manually hit the device on the phone to get it connect (no problems when connecting manually) everytime I start the car.
I'm coming from a Lumia 920 so I'm not sure if there's a setting somewhere I missed.
Cheers!
Click to expand...
Click to collapse
I have the same problem. I must manually go to settings/bluetooth and select the bluetooth device to force it to connect. However, I have installed skipconnect and maybe it messes with the bluetooth connection ?

Categories

Resources