Hi guys!
This is the easest way to root your x10 mini / pro
1. download this:
http://www.speedyshare.com/files/29445314/SuperOneClick.rar
2. run installxrec NOT SUPER ONE CLICK
3. enable usb debuging on your phone and conect phone
4. tap enter
5. now super one click will open
6. click root
7 . close superoneclick
8. tap enter
9 after it done your phone will reboot
YOUR PHONE IS FULLY ROOTED!
iF YOU LIKE IT CLICK THANKS
Oh, really?
http://forum.xda-developers.com/showthread.php?t=950324
thats not the same options
________________
Jestes z polski?
And what about Mike's version?
http://forum.xda-developers.com/showthread.php?t=913136
By the way, it works on 2.1.1.A.0.6 and 2.1.1.C.0.0
this option is not the same version of mine
-------------------------------------
sorry for my bad english
Sorrry wrong thread
Doesn't work for me. SuperOneClick gives "Application failed to initilize properly" error.
Easily sorted my x10 mini pro, thanks!
well done...
worked for me.. thanks
------------------------
gave you a 5 star dude, serious this solve my problem, had quite a difficulty entering into recovery after some issues that had me to repair my phone via seus.
really appreciate this post.
i even note down this link in case for further reference.
Related
First of all, Happy New Year Guys... Hope This year would bring loads of happiness in your life.
i got some surprise for you.
The new SE firmware rooted.
Guys the new firmware for x10 mini pro i.e 2.0.2.a.0.24 prerooted and xrecovery installed...
For Guys who have already updated to that firmware:
In order to install this firmware, you need to install xrecovery first.
Also if you have already flashed with 2.0.2.A.0.24 through SEUS, please downgrade!
Requirements:
DOWNLOAD>>X10 mini pro flasher
DOWNLOAD>>2.0.2.A.0.24PACK.zip
Instructions:
1. Download and unpack 2.0.2.A.0.24PACK.zip. It contains 2 files: update.zip and 2.0.2.A.0.24FlasherFiles folder
2. Copy update.zip to SD Card
3. Copy 2.0.2.A.0.24 FlasherFiles folder inside the flasher's folder.
4. Boot into xRecovery and install update.zip
5. Open flasher and press "Flash" tab
6. Choose "2.0.2.A.0.24FlasherFiles" and flasher will show "Searching for Xperia..."
7. Plug the phone on usb
8. Choose "Reboot" option on recovery and right after the screen goes blank, keep the "back" button pressed until the green light is on.
If you don't succeed at first, press home and on/off button while connected on usb and simultaneusly "back" button.
Make sure you understand the installation process before you try!
How To Downgrade:
1. Use any firmware from here.
2. Flash your mini with X10 mini pro flasher.
3. Then after the downgrade use SuperOneClick for root.
4. Install zdzihu's xrecovery mod.
5. Then Go to Instructions above and read the next step.
If u Like to Help Me :
(Wanna buy sony ericsson x10 mini pro case)...
After root of new firmware use this script to install the following features:
1. Reboot
2. Jit
3. App2sd
u can get this script here. (Thanks to galaningenieros for his awesome work)
Credits:
All credits go to:
zdzihu, for xrecovery and for all this actually, as i followed his method.
Bin4ry for the flasher..
aZuZu for his SIN2IMG tool. Works great!
For Keyboard Problems Go here.
DISCLAIMER: I AM NOT RESPONSIBLE IN ANY WAY, IF YOU BRICK YOUR DEVICE.
USING THIS METHOD AND FILES, IS DONE BY YOUR OWN CHOICE.
What is the difference between this ROM and build 2.0.1.A.0.47? My Xperia X10 Mini Pro (U20a) officially gets 2.0.1.A.0.47 instead of 2.0.2.A.0.24. Can I safely install this version instead?
Thank you in advance.
Never mind, I already found out that this is a more recent version, it is basically the latest update that SE released for the X10 family.
I installed this ROM on my X10 Mini Pro U20a and can confirm that it works like a charm, thanks so much. Great job! I have root access and so far everything is working perfectly. I will proceed to delete some bloatware and finish restoring backups and configuring system settings.
xRecovery is simply awesome, especially taking into account that it is in such an early development state.
I'm incredibly happy with this update. Thanks to shivenjuneja, Bin4ry, zdzihu and aZuZu for the hard work and for making this possible.
Thanks man m happy u like it.
Hi cheers for info etc, just a quick question, I uploaded xrecovery for the x10 but it doesnt seem to work on the mini pro my phone is rooted etc and has busybox
I have tried the xrecovery for the mini pro but as it has to be installed via root explorer, not sure how to do it, even though its explained
Cheers Steve
Assuming you currently have root access.
Just download xRecovery here, then extract the three files and copy them to the /system/bin folder. Finally, reboot your phone and start pressing the back button repeatedly as soon as it starts booting up again (don't wait until you see Sony Ericsson on the screen, start doing it before). xRecovery should start right after the white Sony Ericsson logo.
was happy with it until i realized there may not be many themes or roms for this fw version, downgraded
u can use any theme on this framework just copy services.jar,framework-res.apk,android.policy.jar,framework.jar from the old framework to this...
Can anyone from brazil post here a build.prop for 2.0.2.a.0.24 (x10 mini pro U20a)??
now you can root your mobile using the application no need of flashing the firmware... u can find it here
shivenjuneja , work whit Black HTC Theme or only for themes of 2.0.2.A.0.24?
Nice work ...
Thanks a lot for this! I reflashed my mini pro with this firmware to change back to U20a to get 3G and it's working great
but this firmware change the language ? I've a italian x10minipro
Anyone else having issues with the gps?
Anyone else having issues with the gps? I seem to lock on to a signal, but Ndrive keeps telling me I am off any road. It was working great with 1.6. Other than that, this is rock solid
have 3G lost Wi-Fi
I have two of the Xperia Mini Pro handsets, one is flashed with the u20i firmware ( I should be using u20a) and it works well enough
But flashed the other with the firmware for this country and my carrier(u20a) and the 3G is flakey (probably the carrier) but I can't connect to any Wi-Fi networks.
- Not even the wireless router next to my left elbow, here, on the desk,
shivenjuneja said:
First of all, Happy New Year Guys... Hope This year would bring loads of happiness in your life.
i got some surprise for you.
The new SE firmware rooted.
Guys the new firmware for x10 mini pro i.e 2.0.2.a.0.24 prerooted and xrecovery installed...
For Guys who have already updated to that firmware:
In order to install this firmware, you need to install xrecovery first.
Also if you have already flashed with 2.0.2.A.0.24 through SEUS, please downgrade!
Requirements:
DOWNLOAD>>X10 mini pro flasher
DOWNLOAD>>2.0.2.A.0.24PACK.zip
Instructions:
1. Download and unpack 2.0.2.A.0.24PACK.zip. It contains 2 files: update.zip and 2.0.2.A.0.24FlasherFiles folder
2. Copy update.zip to SD Card
3. Copy 2.0.2.A.0.24 FlasherFiles folder inside the flasher's folder.
4. Boot into xRecovery and install update.zip
5. Open flasher and press "Flash" tab
6. Choose "2.0.2.A.0.24FlasherFiles" and flasher will show "Searching for Xperia..."
7. Plug the phone on usb
8. Choose "Reboot" option on recovery and right after the screen goes blank, keep the "back" button pressed until the green light is on.
If you don't succeed at first, press home and on/off button while connected on usb and simultaneusly "back" button.
Make sure you understand the installation process before you try!
How To Downgrade:
1. Use any firmware from here.
2. Flash your mini with X10 mini pro flasher.
3. Then after the downgrade use SuperOneClick for root.
4. Install zdzihu's xrecovery mod.
5. Then Go to Instructions above and read the next step.
If u Like to Help Me :
(Wanna buy sony ericsson x10 mini pro case)...
After root of new firmware use this script to install the following features:
1. Reboot
2. Jit
3. App2sd
u can get this script here. (Thanks to galaningenieros for his awesome work)
Credits:
All credits go to:
zdzihu, for xrecovery and for all this actually, as i followed his method.
Bin4ry for the flasher..
aZuZu for his SIN2IMG tool. Works great!
For Keyboard Problems Go here.
DISCLAIMER: I AM NOT RESPONSIBLE IN ANY WAY, IF YOU BRICK YOUR DEVICE.
USING THIS METHOD AND FILES, IS DONE BY YOUR OWN CHOICE.
Click to expand...
Click to collapse
Hi.... thanks for instructions, but Flasher link is broken...
Another question [ newbiw] - 2.0.2.A.0.24 is FROYO version?
poncespr said:
Anyone else having issues with the gps? I seem to lock on to a signal, but Ndrive keeps telling me I am off any road. It was working great with 1.6. Other than that, this is rock solid
Click to expand...
Click to collapse
Never mind. I accidentally erased some map files.
Duh...
saywot said:
I have two of the Xperia Mini Pro handsets, one is flashed with the u20i firmware ( I should be using u20a) and it works well enough
But flashed the other with the firmware for this country and my carrier(u20a) and the 3G is flakey (probably the carrier) but I can't connect to any Wi-Fi networks.
- Not even the wireless router next to my left elbow, here, on the desk,
Click to expand...
Click to collapse
It's a problem with a corrupted wpa_supplicant.conf file
delete it with root explorer (making a back-up just in case) and re-boot
- wireless comes back ready hot and strong
this might be a good place to start
Thanks to this thread I have had a fully functional u20a Mini Pro for quite a few weeks and we have been getting along quite well and I now want to take the relationship a bit further - to the next level.
That is to say, I want to update the Build Number from 2.0.2.A.0.24 to, oh I dunno, 2.1.1.A.0.6
I haven't been able to get it from SE so I'm hoping that someone here might point me in the right direction.
New U20a Firmware
I also would like a copy of Firmware 2.1.1.A.0.6 for Mini Pro U20a. Is any one able to share a up copy please
1: get SuperOneClick from its original thread if you don't already have it. Latest version is 1.5.5, but most versions seem to work fine.
2: Delete the "rageagainstthecage" file (no filename extension).
3: get psneuter.zip from the Xperia X8 Android Development forum thread.
4: Unzip it. Rename "psneuter" to "rageagainstthecage" (no filename extension), and move it to your SuperOneClick folder, to replace the rageagainstthecage file you deleted in step 2.
5: run SuperOneClick. Mine rooted without looping.
6: reboot your phone. Test your shiny new root!
Remember to put your phone in debugging mode, etc. Someone in the X8 thread claims that X10 Mini can be rooted via this method; I don't have a Mini so I don't know for sure. But I've got a Mini Pro and it just worked.
Update:
The file you need in Step 3 is "psneuter", not "psneuter.c". psneuter.c is the source file for psneuter. You can ignore it.
donetus says that if you have problems with Titanium Backup (even after step 6!), uninstall it, reboot, and reinstall Titanium. This appears to have worked for several users.
Amey006 says that s/he had to install drivers from the Sony Ericsson PC Companion for SuperOneClick to move past "waiting for device". I had PC Companion already installed when I did mine, so I don't know whether the process works without PC Companion... if you don't have PC Companion, you can get it here.
Update 03-2011:
The latest version of SuperOneClick now includes psneuter; you no longer need to follow the steps above. Just use SuperOneClick!
Mine doesnt root. I followed all the steps.
Can u please give a detailed procedure.
Thanks.
Hi, I just registered to give my thanks.
Now I test it and confirm if it works, but of course thank you very much
Thanks
----------------------------------------------------
EXCELLENT! It worked without problems tested in mini Xperia (E10i - E10A)
Thank you very much!
Amey006 said:
Mine doesnt root. I followed all the steps.
Can u please give a detailed procedure.
Thanks.
Click to expand...
Click to collapse
What happens when you try
porcupineadvocate said:
What happens when you try
Click to expand...
Click to collapse
SuperOneClick gets stuck at waiting for device.
I tried the usb debugging enable disable also.....
Still no success.
I have an U20i india.
Amey006 said:
SuperOneClick gets stuck at waiting for device.
I tried the usb debugging enable disable also.....
Still no success.
I have an U20i india.
Click to expand...
Click to collapse
Does your phone say that it is connected? Try another USB port?
ADB will say "waiting for device" because SuperOneClick tells it to wait until a device is connected; if it says "waiting for device", ADB isn't seeing your phone at all.
porcupineadvocate said:
Does your phone say that it is connected? Try another USB port?
ADB will say "waiting for device" because SuperOneClick tells it to wait until a device is connected; if it says "waiting for device", ADB isn't seeing your phone at all.
Click to expand...
Click to collapse
Yes my phone says it is connected.
The usb debugging and usb flash symbol come up on my status bar.
After the message waiting for device the applicaton (SOC) stops responding.
I changed my usb port too.
Helpppppppppppp....................
Victor18 said:
Hi, I just registered to give my thanks.
Now I test it and confirm if it works, but of course thank you very much
Thanks
----------------------------------------------------
EXCELLENT! It worked without problems tested in mini Xperia (E10i - E10A)
Thank you very much!
Click to expand...
Click to collapse
Which file did u take ????? psneuter or psneuter.c ?????/
Can u please guide me ???
Help. Thanks.
psneuter, not psneuter.c
Amey006 said:
Yes my phone says it is connected.
The usb debugging and usb flash symbol come up on my status bar.
After the message waiting for device the applicaton (SOC) stops responding.
I changed my usb port too.
Helpppppppppppp....................
Click to expand...
Click to collapse
Follow the instructions here, namely this bit:
Turn USB Debugging OFF
Click Root
When it says: Waiting for Device, Turn USB Debugging ON
It'll now run RATC
When it says: Starting ADB Server...
Turn USB Debugging OFF
Turn USB Debugging ON
Turn USB Debugging OFF
All BEFORE it says "Waiting for device..." again
Click to expand...
Click to collapse
porcupineadvocate said:
psneuter, not psneuter.c
Click to expand...
Click to collapse
Can you please give a detailed guide ????
please.please.please.......
Does it need java ???
I have done almost everything. Restarted my phone and pc but still stuck at waiting for device.
Installed java too and also edited system environment variables.
Still no root.
I have SOC 1.5.5
porcupineadvocate said:
Follow the instructions here, namely this bit:
Click to expand...
Click to collapse
Thanks. But i will try it again tomorrow. Thanks for your help.
Works like a charm. Thank you very much
worked on my tiny x10 mini =) tnx a lot
thank you so much
had root -> SE update last week -> no root
Hi all,
I had rooted my x10 mini pro with the z4root tool before. Last week ran a SE update that unrooted my device and also installed back all the crapware.
The z4 root tool doesn't work no more.. it stays on the 'busy rooting' notice forever.
Then I tried the here mentioned method with SuperOneClick with with replaced pseudo file etc..
The program say it has rooted and the superuser app appears in the drawer. However Titanium and Root explorer apps do not have SU accress..
What can I try? I used superoneclick v. 1.5
cheers
vmonk said:
Hi all,
I had rooted my x10 mini pro with the z4root tool before. Last week ran a SE update that unrooted my device and also installed back all the crapware.
The z4 root tool doesn't work no more.. it stays on the 'busy rooting' notice forever.
Then I tried the here mentioned method with SuperOneClick with with replaced pseudo file etc..
The program say it has rooted and the superuser app appears in the drawer. However Titanium and Root explorer apps do not have SU accress..
What can I try? I used superoneclick v. 1.5
cheers
Click to expand...
Click to collapse
You have to reboot your device..!!
Hi.
It work´s on a mini-pro???
Thanks.
works like a charm without looping, thank you very much!
well done ...great job
First of all sorry for my bad English, I'm french
I'm a newbie so I can't post on developpement topic.
I have a problem :
I can't run xRecovery (xRecovery 0.2-release by zdzihu) on my x10i pro !
I tried the automatic installation and it works But when I reboot my phone and "Press BACK button few times right after white SE label appears.", xRecovery don't launch...
Can anyone help me ?
Hi
I assume you have installed a BusyBox.
Try to install it again, but this time install in /system/xbin/ (you can select it in the bottom, right above an "install" button)
try manually if it don't works automatic(automatic must work! )
Plancton.fr said:
First of all sorry for my bad English, I'm french
I'm a newbie so I can't post on developpement topic.
I have a problem :
I can't run xRecovery (xRecovery 0.2-release by zdzihu) on my x10i pro !
I tried the automatic installation and it works But when I reboot my phone and "Press BACK button few times right after white SE label appears.", xRecovery don't launch...
Can anyone help me ?
Click to expand...
Click to collapse
This one is for X10 only. Search for the beta one posted in the x10 mini dev forum
dimbazzo said:
Hi
I assume you have installed a BusyBox.
Try to install it again, but this time install in /system/xbin/ (you can select it in the bottom, right above an "install" button)
Click to expand...
Click to collapse
I have already install Busybox v1.17.1 ! But when I try to put it in /system/xbin/ the status is "Failed... The application failed, either because your device is not nand unlocked or we were unable to remount."
nobodyAtall said:
This one is for X10 only. Search for the beta one posted in the x10 mini dev forum
Click to expand...
Click to collapse
I know so after I tried the X10 pro solution. I use root explorer for copy and move the files etc. But it don't work...
BUT I download the last version : 0.1.1-beta, who fixed event0 issue for mini pro, and now it work ! Thanks for zdzihu !
I just bought an sony xperia x10 and i am new to moddig and flashing i had an htc hero and i rooted it and everything with no problem now i want to go from 1.6 to 2.1 on my experia x10 can comeone please help!!!!
waymon31 said:
I just bought an sony xperia x10 and i am new to moddig and flashing i had an htc hero and i rooted it and everything with no problem now i want to go from 1.6 to 2.1 on my experia x10 can comeone please help!!!!
Click to expand...
Click to collapse
This is the Easy stuff, you dont need root to go from 1.6 to 2.1
First go to the Sony Ericsson website and download two programs called Pc companion and Sony Ericsson Update Service (SEUS), located in support for X10
Then just install those two and follow instructions, you should now already installed the drivers for your x10 by going into flash mode
Now your Pc companion will alert you that there is an update for the x10. Click on that and just follow every step.
To Get 2.2 and over:
1) need to root - download either flashtool from Q&A thread or you can download SuperOneClick
2) Use either to root device - once rooted, reboot phone
3) Download busybox from the market and install
4) Once installed, your device is basically rooted and has xrecovery installed
5) you can reboot into xrecovery by tapping the back button several times when the sony ericsson logo has appeared
6) just install any of these custom roms available on this site and PLEASE READ THE INSTRUCTIONS FOR EACH ROM
7) you may have to flash different basebands for different roms- i will not explain every single step because you can find out by searching and reading these forums
8) just install any rom and reboot DONE!!!
thanks for the help im just stuck on 1 little step i cant seem to get the semc driver installed. any suggestions im using windows vista
waymon31 said:
thanks for the help im just stuck on 1 little step i cant seem to get the semc driver installed. any suggestions im using windows vista
Click to expand...
Click to collapse
It should just try to autoinstall when you plug your phone into usb and connect the first time if your on stock ROM.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
hey if you cant get the computer to read it, turn off your phone, unplug usb from phone, hold the BACK button WHILE plugging the usb into your computer. Keep hold of the back button until the computer has recognised it
xperiax10mods said:
This is the Easy stuff, you dont need root to go from 1.6 to 2.1
First go to the Sony Ericsson website and download two programs called Pc companion and Sony Ericsson Update Service (SEUS), located in support for X10
Then just install those two and follow instructions, you should now already installed the drivers for your x10 by going into flash mode
Now your Pc companion will alert you that there is an update for the x10. Click on that and just follow every step.
To Get 2.2 and over:
1) need to root - download either flashtool from Q&A thread or you can download SuperOneClick
2) Use either to root device - once rooted, reboot phone
3) Download busybox from the market and install
4) Once installed, your device is basically rooted and has xrecovery installed
5) you can reboot into xrecovery by tapping the back button several times when the sony ericsson logo has appeared
6) just install any of these custom roms available on this site and PLEASE READ THE INSTRUCTIONS FOR EACH ROM
7) you may have to flash different basebands for different roms- i will not explain every single step because you can find out by searching and reading these forums
8) just install any rom and reboot DONE!!!
Click to expand...
Click to collapse
thanks for your easy to follow tutorial it worked like a charm!!!!! i am so happy with my new phone its runs very fast!!!!!!!!!!!!!!!!! the pic quility is fantastic!!!!!!! thank again
Hi I really appreciate if anybody who knows how write a step by step guide how to get from stock 2.1 android on x10 mini pro to custom froyo or gingerbread rom.
I search but i canno't found any complex instructions and step by step guide with screen shots.
- Install FlashTool, and using that program Root it and install xRecovery
- Choose froyo or Gingerbread Rom, and copy to SD Card
- When booting, while you see "Sony Ericsson" simbol, please prese back key several times to enter xrecovery
- Choose install custom ZIP from the card, and select the file you downloaded
- Wipe Data / Cache / Factory reset
Voilá! Its done!
Or super one click then busy box then xrecovery place rom on sd .install from sd in xrecovery
sent from this midget x10 mini pro using cm7.2.3.3 14.5
Make sure you have enabled Unknown Resources and USB Debugging which are located at Settings > Applications > Development
and
installed Sony Ericsson Companion so that FlashTool recognises your phone in debug mode.
I suggest you slade's hybrid ROM v5 which I use and really love!
Sent from my U20i using XDA Premium App
Check this:http://forum.xda-developers.com/showthread.php?t=1117713
And say thanks if you like it!!!!!
Thank you for quick answers, second question is after all your guides, can i go back to stock rom and service recognize warranty?
yes.
just update again using SEUS, and your phone will be just as it was before
and i hope last question ... where to get xrecovery
i found install and root with flashtool from here
http://forum.xda-developers.com/showthread.php?t=920746
but cannot found a link to xrecovery (in flashtool there is a button xrecovery but it is disabled) .. what i found is only this
http://forum.xda-developers.com/showthread.php?p=9561641
but i can't see download link of .apk
can anybody post good link of it? Thank you very much
try with [Unified] Mini Pro xRecovery .apk Installer v1.4 from D4rKn3sSyS
http://forum.xda-developers.com/showthread.php?p=13791318
Android market xrecovery installer after super one click and busy box
sent from this midget x10 mini pro using cm7.2.3.3 14.5 Oc by slade87
walkercz said:
but cannot found a link to xrecovery (in flashtool there is a button xrecovery but it is disabled) ..
Click to expand...
Click to collapse
the button is probably disabled cause u need to ask root perms
steps are:
0) Ensure "USB debugging" and "Unknown sources" options are enabled in ur settings.
1) Open flashtool
2) Root ur device
3) Reboot ur phone
4) In flashtool, click "Ask root Perms" button
5) U should see xrecovery button enabled.
6) Click it!!!
hope this helps!
Hi all, if I use Ubuntu Linux (Maverick), is there something like SuperOneClick?