Hello Guys.
I have a archos 70 IT. ıt ısnt stable sometımes ıt crashs and reboots radomly. but at "Urukdroıd Loadıng" ıt stops... After I reboot ıt manuell ıt works normal tıll the next crash
Can someone post hıs stable Urukconfıg (whıch settıngs to actıvate wıth whıch confıgs)
Maybe thıs wıll solve the problem. also I trıed to mute the devıce before standby mode but thıs dıdnt help... ıt happens whıle standby mode and whıle root ıs gıven to programs
sorry for my bad englısh
what version of urukdroid are you using currently?
Urukdroıd 1.0
and then I patched ıt wıth 1.1 kernel but the problem stıll exısts...
now ıt doesn't start not even ıf I reboot ıt manuel :/
I wıll reset ıt tomorrow and look ıf thıs solve the problem...
but I already had reınstall UD 1.0 after I recognızed thıs problem!
derSmoo said:
Urukdroıd 1.0
and then I patched ıt wıth 1.1 kernel but the problem stıll exısts...
now ıt doesn't start not even ıf I reboot ıt manuel :/
I wıll reset ıt tomorrow and look ıf thıs solve the problem...
but I already had reınstall UD 1.0 after I recognızed thıs problem!
Click to expand...
Click to collapse
My ARCHOS 101 got same issue as you before and I found my A101/ UD1.0
or UD1.1 always crashed during plug in DC power cable,
afterward I try to unplug the DC power cable and solve the problem!
but I do not think it is reasonable and look forward somebody can correct
it!!!
Related
Hello! I have a big problem... I try to update my rw6815 I buy it from Spain... the update start´s and after 5 minutes my pc was in stang-by ,so the update is incompleat. I try to update again but my rw6815 didn´t start , I try with a hard reset and apear white screen with hp and a number in the left corner...now its dificult to turning on because all the time I have to remove the battery and try with the hard reset. I dont have any idea...anybody can help me please! I hope that somebody have an idea . Sorry for my english
rw6815
zeratu said:
Hello! I have a big problem... I try to update my rw6815 I buy it from Spain... the update start´s and after 5 minutes my pc was in stang-by ,so the update is incompleat. I try to update again but my rw6815 didn´t start , I try with a hard reset and apear white screen with hp and a number in the left corner...now its dificult to turning on because all the time I have to remove the battery and try with the hard reset. I dont have any idea...anybody can help me please! I hope that somebody have an idea . Sorry for my english
Click to expand...
Click to collapse
Push 2buttons upper red and green, then soft reset.If bootloader is not corrupt you will flash your device with mini sd card.Download from here: http://forum.xda-developers.com/showthread.php?t=358704&highlight=rw6815+upgrade any version for rw6815, copy file .nb0 into the mini sd card, insert your device in bootloader and wait 15-20min.Sory for my bad english.ENJOY!!!
Hey Guys!
After my Phone freezed, i must take the Accu out to restart it, after this following problem occured. My HTC Niki stuck in Bootscreen. Only shows me the Radio Infomration and the HTC Logo. Nothing more happen. The Phone dont connect to USB
I tried to flash a new Rom -> cant connect
I Tried MTTY -> cant find USB
Anybody got an Idea how to Revive it ?
BTW: I got Hard-SPL and the Insomia 3.0 ROM on the Phone
Ok i was a little bit hasty !! Sorry for that,
I found a solution it myself - with 4 Hard resets... after this it worked... with a loss of my data
i have abig problem with my atome ,1st, bootloader it's dead already after i upgrade only OS ( not Exten, eboot,or radio) via SD card.but i can fix it by press
(camera+power on)in the same time with inserting battery,after it show MINI bootloader,then i try upgrade againe, but this only EXTENED rom.So it dead againe.and now i try as (camera+power on),(camera+reset) or anyway for fix,but it still dead.
so any body help.............
plz help me..i am facing the same problem...when i am upgrading my rom..now how i can do? device totaly dead...i can`t on my device..how i can ON power? anybody help me...
hi try this way
ShUvR0 said:
plz help me..i am facing the same problem...when i am upgrading my rom..now how i can do? device totaly dead...i can`t on my device..how i can ON power? anybody help me...
Click to expand...
Click to collapse
1st you must know that your divice dead or not?
try to understand this http://forum.xda-developers.com/wiki/index.php?title=Semi-Brick_symptom_ATOM_BRICK
2nd if you are sure that your divice dead try this
http://forum.xda-developers.com/wik...m_Exec,_Rover_G5,_Orsio_n725,_HP68xx_DeadBoot
Finally,the methode is very difficult to understand but you must know becuase its only one way to fix.Your divice is atome Ex so you have 2 way to do.Also you shoud be see my replyed too http://forum.xda-developers.com/showthread.php?t=336278&page=20
wish everything success but if not mail to me againe ill take some picture that i worked with my divice.
I tested, my device...when i charged my device with battary itz orange light shown, but when i remove my battary from my device nothing happen...no light shown....now how can do?
hi
ShUvR0 said:
I tested, my device...when i charged my device with battary itz orange light shown, but when i remove my battary from my device nothing happen...no light shown....now how can do?
Click to expand...
Click to collapse
Entering Bootloader Mode on Semi-Brick Atom
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding the buttons
4. Release the buttons at the same time (You should see bootloader screen)
tried this yet?
HEY ! i have problem with my Xperia X10mini Divice
How i create problem ---> Custom kernel flased by stock BLRelock
I unblock bootloader , rooted my phone , flash custom kernel and custom room ( CM10 ), but i did somthing wrong becouse my little brick goes in Boot Loop i downgrade kernel and instal one of the first then instal the newest nAa kernel format/system/data/cache then in CWM instal CM10
But that not help BootLoop Stay ! Then I have this stupid idea to --> Flash custom Kernel 2.6.32.60 nA-02 with BLRelock in my logs i get Error ( Same problem like this http://forum.xda-developers.com/showthread.php?t=1980128&highlight=brick ) But there phone can be open in FlashMode
My phone it's now a completly brick - Menu + Power don't works led is dead. I can't go in flash mode Power off + Back -don't works.
I think it's may battery is dead ( 0% ) but i don't know how to check it. And how to Check it.
PC Companion / SEUS don't work ( Flash mode can't be opened )
Bootloader it's dead ?
SRY FOR MY BAD ENGLISH ! I hope someone can help me ! LF Tutorial how i can repair it in home or how looks in proffesional ( Riff Jtag / Box / 4SE works )
if you flashed BL relock with custom kernel, you have a brick, you will have to take it to repair.
response
Yes take it to repair you mean use Box to repair it ? Its only soft - tzn write new bootloader or its a Hardware problem and somthing can be damaged ?
What you think about idea with low battery ? It's can works ? How to charge it?
I go to the service today and ask for repair.
Somone can help me anyway ? Someone from poland ?
x10 mini e10i
Hey I bricked my x10 mini to it won't turn on or anything and no drivers two any way to fix it its like there's no ROM on it now at all need help if any one knows away how to fix it please help can email me at [email protected] phone is a brick now can't be used hoping there is away to fix the thing some how
Hi all, i have a doogee DG580 and it´s bricked, nothing works, screen is black, battery don´t charge. :crying:
I tried several things, Sp flash tools from older to last versions, several cables, win xp, win 7 32bits /64 bits, win 8, usb ports 3.0, room´s from doogee, with battery, without battery, everything i tried don´t work...
My phone is detected, i think that is the correct driver, but give me a BROMM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Thanks !!
i have the same phone doogee dg580 , and i have a similar probleme , my case is that the screen not responding , freeze and no touch works at all , tried original rom , factory hard reset , swiping cach .....
i have to mention that it happened before and i send it to the guarranti service and they fixed it , but i dont know how they do ?
any one please help
( sorry for my english )
prince2510 said:
i have the same phone doogee dg580 , and i have a similar probleme , my case is that the screen not responding , freeze and no touch works at all , tried original rom , factory hard reset , swiping cach .....
i have to mention that it happened before and i send it to the guarranti service and they fixed it , but i dont know how they do ?
any one please help
( sorry for my english )
Click to expand...
Click to collapse
I think that your problem is hardware fault and the only option is to replace them, witch they did... Mine is a software related problem, i send it to supplier.