i have abig problem with my atome ,1st, bootloader it's dead already after i upgrade only OS ( not Exten, eboot,or radio) via SD card.but i can fix it by press
(camera+power on)in the same time with inserting battery,after it show MINI bootloader,then i try upgrade againe, but this only EXTENED rom.So it dead againe.and now i try as (camera+power on),(camera+reset) or anyway for fix,but it still dead.
so any body help.............
plz help me..i am facing the same problem...when i am upgrading my rom..now how i can do? device totaly dead...i can`t on my device..how i can ON power? anybody help me...
hi try this way
ShUvR0 said:
plz help me..i am facing the same problem...when i am upgrading my rom..now how i can do? device totaly dead...i can`t on my device..how i can ON power? anybody help me...
Click to expand...
Click to collapse
1st you must know that your divice dead or not?
try to understand this http://forum.xda-developers.com/wiki/index.php?title=Semi-Brick_symptom_ATOM_BRICK
2nd if you are sure that your divice dead try this
http://forum.xda-developers.com/wik...m_Exec,_Rover_G5,_Orsio_n725,_HP68xx_DeadBoot
Finally,the methode is very difficult to understand but you must know becuase its only one way to fix.Your divice is atome Ex so you have 2 way to do.Also you shoud be see my replyed too http://forum.xda-developers.com/showthread.php?t=336278&page=20
wish everything success but if not mail to me againe ill take some picture that i worked with my divice.
I tested, my device...when i charged my device with battary itz orange light shown, but when i remove my battary from my device nothing happen...no light shown....now how can do?
hi
ShUvR0 said:
I tested, my device...when i charged my device with battary itz orange light shown, but when i remove my battary from my device nothing happen...no light shown....now how can do?
Click to expand...
Click to collapse
Entering Bootloader Mode on Semi-Brick Atom
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding the buttons
4. Release the buttons at the same time (You should see bootloader screen)
tried this yet?
Related
Hello! I have a big problem... I try to update my rw6815 I buy it from Spain... the update start´s and after 5 minutes my pc was in stang-by ,so the update is incompleat. I try to update again but my rw6815 didn´t start , I try with a hard reset and apear white screen with hp and a number in the left corner...now its dificult to turning on because all the time I have to remove the battery and try with the hard reset. I dont have any idea...anybody can help me please! I hope that somebody have an idea . Sorry for my english
rw6815
zeratu said:
Hello! I have a big problem... I try to update my rw6815 I buy it from Spain... the update start´s and after 5 minutes my pc was in stang-by ,so the update is incompleat. I try to update again but my rw6815 didn´t start , I try with a hard reset and apear white screen with hp and a number in the left corner...now its dificult to turning on because all the time I have to remove the battery and try with the hard reset. I dont have any idea...anybody can help me please! I hope that somebody have an idea . Sorry for my english
Click to expand...
Click to collapse
Push 2buttons upper red and green, then soft reset.If bootloader is not corrupt you will flash your device with mini sd card.Download from here: http://forum.xda-developers.com/showthread.php?t=358704&highlight=rw6815+upgrade any version for rw6815, copy file .nb0 into the mini sd card, insert your device in bootloader and wait 15-20min.Sory for my bad english.ENJOY!!!
mine is dead no display after rom upgrade
onle led are blinking
jtag method not working
desperate for heelp
sure it occured after flashing plzz help some how i need to enter
bootloader mod plzzz
not hardware pblm
hey man
try to post more info as
*your device(p3400 or p3400i)
*what was your spl
*what is your device serial(starts with "ht7xxx" or "ht8xxx")
and try to do this remove the battery and wait for a while then connect it again and then press and hold camera button meanwhile press and hold power button too and wait till you see a screen of three colors (green ,blue ,red) and then release .if this screen appeared so there may be a very good chance to get it alive again.
and try to post exactly what happened.
bye
is p3400
i think spl was for some other device
got it frm a frnd who said he made the rom
noo
it doesnt work no response
after the upgrade the device became dead
as i searched isaw somewhere that the spl was corruoted so plz help
hey man
your spl means the numbers that used to appear when your device used to start(in the HTC logo screen) try to remmember it!!!!!!!!
and what does your device serial start with? (ht7 or ht8) you can find it under the battery .
what the link of the rom upgrade you used?
and try the to press and hold both camera ,voice buttons meanwhile press the power button.
ok
bye
Hi check my post in wm6.1 for new gene thread on page 7 (post #63)
sebulu07 said:
mine is dead no display after rom upgrade
onle led are blinking
jtag method not working
desperate for heelp
sure it occured after flashing plzz help some how i need to enter
bootloader mod plzzz
not hardware pblm
Click to expand...
Click to collapse
serial
mine is 7x serial its starts with ht7.....
♠♠♠PLeaSE HeLLLP MY p3400 bricked♦ NeED HelP URgently♠♠♠♠
dear bros. am using HTC gene. yesterday am thought to upgrade my Phone OS and i do the olipro method . first am copy gene_hspl.exe into my phone memory and click to that file . then the PHONE was switch off .after olipro methord my phone ded (only red and green button blinks when i press the power butten).and am go to the orefkov method . but the last...... " ROM update utility " runs in my pc an error message display. "ERROR 200 " ."pls get newer update utility". pls help me . now my phone was
switch off. pls replay urgently.
any trick for swith on my phone., like to remove gene_hspl.exe from the phone memmory(just my idea).
or how to start my phone ....
adv thx.,,,,,,,,,,...................
Dear Pls try with the ROM Update Utility attached below. Even I used to get this error sometimes back. But after using this utility I have never faced any issues....
same problem
@krrahuldev
Did u manage to fix ur phone?
i have the same problem
My handset not going in boot loader mode
only ( green + red ) button light blink
try upgarde the rom , allways connection error
any solution will be helpfull
Thanks in advance
try killing the wcecomm.exe process from task manager again!!
hope it works
tryed , but the computer does not detect the handset,
Even check in DEVICE MANAGER ,does not show anything
Dear,
Can u please tell us which Operating System u are using. U might need to change the USB drives given by Krazy.
i am useing windows XP
Any link will be usefull
please check ur private msgs....
this phone came to change the lang
Original rom was : RUU_Gene_HTC_RUS_1.7.411.0_4.1.13.31_02.71.90_Ship _Abdie.exe
From
Russian to english
I use Olipro For Old Gene
After that i upgarde the rom
with this file
RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe
After the upgrade it showed sucessfull
But the handset did not power on
Only lights comming on the ( Red- green button )
& now even the computer does not detect the phone
press n hold camera button n reset if u hv done previous steps properly it wil go to bootloader mode!
tryed many times but does not go into bootloader
sams said:
tryed many times but does not go into bootloader
Click to expand...
Click to collapse
Hold Camera Button and press "Soft Reset " which is at the Bottom of phone..
try This
same problem but now cant get in bootlaoder anymore,pls help
same problem but now cant get in bootlaoder anymore,.when on the green n red light blink 1 time only ,pls help
excelpass said:
same problem but now cant get in bootlaoder anymore,.when on the green n red light blink 1 time only ,pls help
Click to expand...
Click to collapse
remove battery and then press on button then put battery back and then try to above method .
Any Trick for restoring boot file??
cuteitsme said:
Dear Pls try with the ROM Update Utility attached below. Even I used to get this error sometimes back. But after using this utility I have never faced any issues....
Click to expand...
Click to collapse
Hello Brother .,
not working for me the update tool to attached by u... the same prob shows.!!!!!!!!!!
any trick for restoring my p3400 rom? for working condition???
pls reply immediately...........
are u able to get into the boot loader mode??
unless n until u r able to enter the boot loader mode the ROM update utility will not detect your phone.....
Problem
i have the same problem
My handset not starting on
only ( green + red ) button light blink
try everythin yaar
any solution will be helpfull
Thanks in advance
HTC P3400 good bye
i got the same proplem my mobile was stucked in bootloader screen i used mtty & successfully completed the rom update after that my phone give nothing even no bootloader screen so i have to say good bye
Hi.
In first, sorry for my english.
I have trouble, Previous i have stock v20c, I want to install CM 10.1.1, and first i flashed kernel boot.img from zip package with CM. Previously i had se xperia neo v, so i did it in habbit. Now i have bootloop with LG logo and i have no idea to solve it. Anyone can help me? I dont have CWM recovery in this kernel. If I send phone to LG service, they repair my phone?
kuba295 said:
Hi.
In first, sorry for my english.
I have trouble, Previous i have stock v20c, I want to install CM 10.1.1, and first i flashed kernel boot.img from zip package with CM. Previously i had se xperia neo v, so i did it in habbit. Now i have bootloop with LG logo and i have no idea to solve it. Anyone can help me? I dont have CWM recovery in this kernel. If I send phone to LG service, they repair my phone?
Click to expand...
Click to collapse
You don't need to send it to LG service. You just softbricked your phone. Try this: http://forum.xda-developers.com/showpost.php?p=40483954&postcount=2
anirion said:
You don't need to send it to LG service. You just softbricked your phone. Try this: http://forum.xda-developers.com/showpost.php?p=40483954&postcount=2
Click to expand...
Click to collapse
hard reset not work, force switch off not work. i plug in phone without battery and hold for 3 seconds volup+power and my phone connect and disconect in loop i dont see S/W Upgrade. Anyone can help me? Maybe, the problem is not stock kernel? But anyway i dont run s/w upradge by this method
@edit: I solve it, i insert battery too fast. But anyway i have CM10.1.1, my phone works and I'm happy. BIG THANKS TO YOU @anirion!!!!
i am also facing the same problem
kuba295 said:
hard reset not work, force switch off not work. i plug in phone without battery and hold for 3 seconds volup+power and my phone connect and disconect in loop i dont see S/W Upgrade. Anyone can help me? Maybe, the problem is not stock kernel? But anyway i dont run s/w upradge by this method
@edit: I solve it, i insert battery too fast. But anyway i have CM10.1.1, my phone works and I'm happy. BIG THANKS TO YOU @anirion!!!!
Click to expand...
Click to collapse
I am also facing the same problem nothing is working and when i plug my phone to computer without battery , windows detects and it goes away in a loop. how can i get passed this...how did you do this?? please help !!! my phone is unrooted before it got softbricket. I am a noob to all these topics.
nikscrysis29 said:
I am also facing the same problem nothing is working and when i plug my phone to computer without battery , windows detects and it goes away in a loop. how can i get passed this...how did you do this?? please help !!! my phone is unrooted before it got softbricket. I am a noob to all these topics.
Click to expand...
Click to collapse
There're some information about fastboot in http://forum.xda-developers.com/showthread.php?t=2221102, in 0) Preparations:-
Hi guys,
My XM4A is already dead, cannot enter flashmood and fast boot, only red led blinking and can't detect with PC, anyone can resolve my problem, please?
Sorry my bad english :crying::crying::angel:
Abe Vaughn said:
Hi guys,
My XM4A is already dead, cannot enter flashmood and fast boot, only red led blinking and can't detect with PC, anyone can resolve my problem, please?
Sorry my bad english :crying::crying::angel:
Click to expand...
Click to collapse
Charge your phone..
Battery died not phone..
this happened to me too, i got an error from whatsapp's date something like that, i reset the phone and it stucked in sony logo, i wanted to flash it but it get the green led but no detection from the pc, i can only get into adb mode (blue led), help me please
vinay said:
Charge your phone..
Battery died not phone..
Click to expand...
Click to collapse
i had to recharge full day, but it won't work, please help me :crying::crying::crying:
Abe Vaughn said:
i had to recharge full day, but it won't work, please help me :crying::crying::crying:
Click to expand...
Click to collapse
what was last thing you did with your phone..
vinay said:
what was last thing you did with your phone..
Click to expand...
Click to collapse
firstly my phone is always restart by it self, and then i try to upgrade the os to marshmallow and always same, the phone always restart again, downgrade again by flashtool, and my phone never turn on again, just red led blingking now, any idea to repair my phone?
Send it to sony service center.. I don't think there's any solution for that.. Since there's no way to interact with Phone..
Downgrading is always risky..