dead gene, totally, any1 who can solve? - P3400 ROM Development

mine is dead no display after rom upgrade
onle led are blinking
jtag method not working
desperate for heelp
sure it occured after flashing plzz help some how i need to enter
bootloader mod plzzz
not hardware pblm

hey man
try to post more info as
*your device(p3400 or p3400i)
*what was your spl
*what is your device serial(starts with "ht7xxx" or "ht8xxx")
and try to do this remove the battery and wait for a while then connect it again and then press and hold camera button meanwhile press and hold power button too and wait till you see a screen of three colors (green ,blue ,red) and then release .if this screen appeared so there may be a very good chance to get it alive again.
and try to post exactly what happened.
bye

is p3400
i think spl was for some other device
got it frm a frnd who said he made the rom

noo
it doesnt work no response
after the upgrade the device became dead
as i searched isaw somewhere that the spl was corruoted so plz help

hey man
your spl means the numbers that used to appear when your device used to start(in the HTC logo screen) try to remmember it!!!!!!!!
and what does your device serial start with? (ht7 or ht8) you can find it under the battery .
what the link of the rom upgrade you used?
and try the to press and hold both camera ,voice buttons meanwhile press the power button.
ok
bye

Hi check my post in wm6.1 for new gene thread on page 7 (post #63)
sebulu07 said:
mine is dead no display after rom upgrade
onle led are blinking
jtag method not working
desperate for heelp
sure it occured after flashing plzz help some how i need to enter
bootloader mod plzzz
not hardware pblm
Click to expand...
Click to collapse

serial
mine is 7x serial its starts with ht7.....

Related

Dead Htc Help

:confused
HEY MY HTC IS DEAD
NO DISPLAY ONLY LEDS ARE FLASHING
NOT EVEN ABLE TO CONNECT WITH COMPUTER PROBLEM AFTER WRONG HSPL FLASHING
IT JUST BLINKS THE LIGHTS WONT EVEN BOOT
HARD SOFT RESET NOT WORKING NOT EVEN DISPLAY NO LIGHT EXCEPT BUTTON LEDS
PLZZ HELP ITS CHRISTMAS PLZZZZ I NEDD DURING THE HOLIDAYS PLZZ I TRUST U ALL
Read this thread.
ramersonw said:
Read this thread.
Click to expand...
Click to collapse
hey mine is not booting even, no display, no response ,only the lights are flashing not even screen lite
it might be a hardware problem........
hey it ocured after being flashed by a wrong spl
not even j tag helps
any solution
l

Not going into bootlodr mode after install RUU Gene Asia ship old rom on new htc gene

Sir,
can any one tell me how to restore my htc p3400i back to normal. i have a device HTC P3400i GENE100. i use a guide on this site of KRAZY_ABOUT i successfully install orefkov and after install that i upgrade my original ROM WM6.0 to cooked wm6.1 (by lemlon). after install the cook rom i get my device too slow so then i reinstall RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship.exe i was really dont know it was for old gene. after install it my HTC is restart and not booting up and not going into bootloader mode and i tried evey combination of key (camera+power button or vol+cam+power or press both "-" button and insert batt.)to go in bootloader mode.... PLZ Help me i m suffer with this problem.
http://forum.xda-developers.com/showthread.php?t=506467
now only gene jtag method can help u !
search for gene_jtag_restore_revised and u will find
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
amolji said:
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
Click to expand...
Click to collapse
install a new ROM thats it
PRoblem solved
Even my device is bricked because of this ROM
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
amit_nikharge27 said:
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
Click to expand...
Click to collapse
hi amit,
i am also finding the solution for this. but now i m sure i have only last way to restore this with JTAG method, so i m collecting information about this JTAG method, if i able to restore my GENE with this i will definitely create a full guide for new bee who are struggling with this problem...
so keep u r eye on thread.....
bye....///
Hey hi, guru,
did u managed to restore your device using JTAG method.
could you please share me the steps if you have resolved it.
any one need information on j-tag.....?coz i recovered my lost gene b4 6 months ago using this j-tag.....so simple.....
Why do people go around flashing ROM's blindly?? :angry:
It is clearly mentioned everywhere i read not to flash original ROM's without removing the radio parts..
Please don't flash a rom who contains IPL, SPL or GSM. It will brick your device. Sometimes in a irreparable way.
People should pay more attention to everything mentioned here..
Hi rony_z367,
b4 8 months i lost my mobile due to upgrading spl,but it was in warranty...
now my gene is working fine with cooked roms but still i want to know about J-Tag.
sry abt my english
It is the process of recovering the memory addresses of ur ARM where u can directly connected to the respected hardware & re-program that h/w with ur given addresses.....but its so risky.....finaly ur addresse comes to 00....
Actually i didn't understand it completely..
but thx for info..
the pleasure is all mine.....thnx......

♠♠♠PLeaSE HeLLLP MY p3400 bricked♦ NeED HelP URgently♠♠♠♠

♠♠♠PLeaSE HeLLLP MY p3400 bricked♦ NeED HelP URgently♠♠♠♠
dear bros. am using HTC gene. yesterday am thought to upgrade my Phone OS and i do the olipro method . first am copy gene_hspl.exe into my phone memory and click to that file . then the PHONE was switch off .after olipro methord my phone ded (only red and green button blinks when i press the power butten).and am go to the orefkov method . but the last...... " ROM update utility " runs in my pc an error message display. "ERROR 200 " ."pls get newer update utility". pls help me . now my phone was
switch off. pls replay urgently.
any trick for swith on my phone., like to remove gene_hspl.exe from the phone memmory(just my idea).
or how to start my phone ....
adv thx.,,,,,,,,,,...................
Dear Pls try with the ROM Update Utility attached below. Even I used to get this error sometimes back. But after using this utility I have never faced any issues....
same problem
@krrahuldev
Did u manage to fix ur phone?
i have the same problem
My handset not going in boot loader mode
only ( green + red ) button light blink
try upgarde the rom , allways connection error
any solution will be helpfull
Thanks in advance
try killing the wcecomm.exe process from task manager again!!
hope it works
tryed , but the computer does not detect the handset,
Even check in DEVICE MANAGER ,does not show anything
Dear,
Can u please tell us which Operating System u are using. U might need to change the USB drives given by Krazy.
i am useing windows XP
Any link will be usefull
please check ur private msgs....
this phone came to change the lang
Original rom was : RUU_Gene_HTC_RUS_1.7.411.0_4.1.13.31_02.71.90_Ship _Abdie.exe
From
Russian to english
I use Olipro For Old Gene
After that i upgarde the rom
with this file
RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe
After the upgrade it showed sucessfull
But the handset did not power on
Only lights comming on the ( Red- green button )
& now even the computer does not detect the phone
press n hold camera button n reset if u hv done previous steps properly it wil go to bootloader mode!
tryed many times but does not go into bootloader
sams said:
tryed many times but does not go into bootloader
Click to expand...
Click to collapse
Hold Camera Button and press "Soft Reset " which is at the Bottom of phone..
try This
same problem but now cant get in bootlaoder anymore,pls help
same problem but now cant get in bootlaoder anymore,.when on the green n red light blink 1 time only ,pls help
excelpass said:
same problem but now cant get in bootlaoder anymore,.when on the green n red light blink 1 time only ,pls help
Click to expand...
Click to collapse
remove battery and then press on button then put battery back and then try to above method .
Any Trick for restoring boot file??
cuteitsme said:
Dear Pls try with the ROM Update Utility attached below. Even I used to get this error sometimes back. But after using this utility I have never faced any issues....
Click to expand...
Click to collapse
Hello Brother .,
not working for me the update tool to attached by u... the same prob shows.!!!!!!!!!!
any trick for restoring my p3400 rom? for working condition???
pls reply immediately...........
are u able to get into the boot loader mode??
unless n until u r able to enter the boot loader mode the ROM update utility will not detect your phone.....
Problem
i have the same problem
My handset not starting on
only ( green + red ) button light blink
try everythin yaar
any solution will be helpfull
Thanks in advance
HTC P3400 good bye
i got the same proplem my mobile was stucked in bootloader screen i used mtty & successfully completed the rom update after that my phone give nothing even no bootloader screen so i have to say good bye

hi all ,help for my dead BL agiane

i have abig problem with my atome ,1st, bootloader it's dead already after i upgrade only OS ( not Exten, eboot,or radio) via SD card.but i can fix it by press
(camera+power on)in the same time with inserting battery,after it show MINI bootloader,then i try upgrade againe, but this only EXTENED rom.So it dead againe.and now i try as (camera+power on),(camera+reset) or anyway for fix,but it still dead.
so any body help.............
plz help me..i am facing the same problem...when i am upgrading my rom..now how i can do? device totaly dead...i can`t on my device..how i can ON power? anybody help me...
hi try this way
ShUvR0 said:
plz help me..i am facing the same problem...when i am upgrading my rom..now how i can do? device totaly dead...i can`t on my device..how i can ON power? anybody help me...
Click to expand...
Click to collapse
1st you must know that your divice dead or not?
try to understand this http://forum.xda-developers.com/wiki/index.php?title=Semi-Brick_symptom_ATOM_BRICK
2nd if you are sure that your divice dead try this
http://forum.xda-developers.com/wik...m_Exec,_Rover_G5,_Orsio_n725,_HP68xx_DeadBoot
Finally,the methode is very difficult to understand but you must know becuase its only one way to fix.Your divice is atome Ex so you have 2 way to do.Also you shoud be see my replyed too http://forum.xda-developers.com/showthread.php?t=336278&page=20
wish everything success but if not mail to me againe ill take some picture that i worked with my divice.
I tested, my device...when i charged my device with battary itz orange light shown, but when i remove my battary from my device nothing happen...no light shown....now how can do?
hi
ShUvR0 said:
I tested, my device...when i charged my device with battary itz orange light shown, but when i remove my battary from my device nothing happen...no light shown....now how can do?
Click to expand...
Click to collapse
Entering Bootloader Mode on Semi-Brick Atom
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding the buttons
4. Release the buttons at the same time (You should see bootloader screen)
tried this yet?

[q] solution for t-mobile htc hd2 bricked---please help me

Hi
i got a new t-mobile htc hd2 a few days back later
i don't know what happens to it first it get started and stuck on the main screen of startup "stick together"
and i go to market and now the phone do not turns on when i tried to turn it on
so guys please help me what i have to do now
any solution any custom rom--flashing please help me
thanks to all of you
it's not "bricked" mate, bricked means that not work nothing, no bootloader no nothing ( as mine )
phone stay in black screen.
maybe you solve re-entering in bootloader mode ( tri color screen )
and re-flashing phone
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
mianhadi143 said:
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
Click to expand...
Click to collapse
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
ubejd said:
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
Click to expand...
Click to collapse
You need to make sure you download a rom based on your version of HD2. Do you have the European version, or Tmo versoion?

Categories

Resources